V4L/DVB: vpfe_capture: Create separate Kconfig file for davinci devices

Currently VPFE Capture driver and DM6446 CCDC driver is being
reused for AM3517. So this patch is preparing the Kconfig/makefile
for re-use of such IP's.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 686fa7ada85b02f52654f3d70c652a8c7409f1b7..280e76af6daa26df4e04e8df9584bffa190602ea 100644 (file)
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -571,66 +571,7 @@ config VIDEO_VIVI
          Say Y here if you want to test video apps or debug V4L devices.
          In doubt, say N.
 
-config VIDEO_VPSS_SYSTEM
-       tristate "VPSS System module driver"
-       depends on ARCH_DAVINCI
-       help
-         Support for vpss system module for video driver
-
-config VIDEO_VPFE_CAPTURE
-       tristate "VPFE Video Capture Driver"
-       depends on VIDEO_V4L2 && ARCH_DAVINCI
-       select VIDEOBUF_DMA_CONTIG
-       help
-         Support for DMXXXX VPFE based frame grabber. This is the
-         common V4L2 module for following DMXXX SoCs from Texas
-         Instruments:- DM6446 & DM355.
-
-         To compile this driver as a module, choose M here: the
-         module will be called vpfe-capture.
-
-config VIDEO_DM6446_CCDC
-       tristate "DM6446 CCDC HW module"
-       depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
-       select VIDEO_VPSS_SYSTEM
-       default y
-       help
-          Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
-          with decoder modules such as TVP5146 over BT656 or
-          sensor module such as MT9T001 over a raw interface. This
-          module configures the interface and CCDC/ISIF to do
-          video frame capture from slave decoders.
-
-          To compile this driver as a module, choose M here: the
-          module will be called vpfe.
-
-config VIDEO_DM355_CCDC
-       tristate "DM355 CCDC HW module"
-       depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
-       select VIDEO_VPSS_SYSTEM
-       default y
-       help
-          Enables DM355 CCD hw module. DM355 CCDC hw interfaces
-          with decoder modules such as TVP5146 over BT656 or
-          sensor module such as MT9T001 over a raw interface. This
-          module configures the interface and CCDC/ISIF to do
-          video frame capture from a slave decoders
-
-          To compile this driver as a module, choose M here: the
-          module will be called vpfe.
-
-config VIDEO_ISIF
-       tristate "ISIF HW module"
-       depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
-       select VIDEO_VPSS_SYSTEM
-       default y
-       help
-          Enables ISIF hw module. This is the hardware module for
-          configuring ISIF in VPFE to capture Raw Bayer RGB data  from
-          a image sensor or YUV data from a YUV source.
-
-          To compile this driver as a module, choose M here: the
-          module will be called vpfe.
+source "drivers/media/video/davinci/Kconfig"
 
 source "drivers/media/video/omap/Kconfig"
 

diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 2beb4e415e6bbbad820567bf8f7c18de51dd64f5..ed370a9836ccdfca34be54a545ddb36522c20ff9 100644 (file)
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -172,7 +172,7 @@ obj-$(CONFIG_VIDEO_SAA7164)     += saa7164/
 
 obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
 
-obj-$(CONFIG_ARCH_DAVINCI)     += davinci/
+obj-y  += davinci/
 
 obj-$(CONFIG_ARCH_OMAP)        += omap/
 

diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
new file mode 100644 (file)
index 0000000..6b19540
--- /dev/null
+++ b/drivers/media/video/davinci/Kconfig
@@ -0,0 +1,93 @@
+config DISPLAY_DAVINCI_DM646X_EVM
+       tristate "DM646x EVM Video Display"
+       depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+       select VIDEOBUF_DMA_CONTIG
+       select VIDEO_DAVINCI_VPIF
+       select VIDEO_ADV7343
+       select VIDEO_THS7303
+       help
+         Support for DM6467 based display device.
+
+         To compile this driver as a module, choose M here: the
+         module will be called vpif_display.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+       tristate "DM646x EVM Video Capture"
+       depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+       select VIDEOBUF_DMA_CONTIG
+       select VIDEO_DAVINCI_VPIF
+       help
+         Support for DM6467 based capture device.
+
+         To compile this driver as a module, choose M here: the
+         module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+       tristate "DaVinci VPIF Driver"
+       depends on DISPLAY_DAVINCI_DM646X_EVM
+       help
+         Support for DaVinci VPIF Driver.
+
+         To compile this driver as a module, choose M here: the
+         module will be called vpif.
+
+config VIDEO_VPSS_SYSTEM
+       tristate "VPSS System module driver"
+       depends on ARCH_DAVINCI
+       help
+         Support for vpss system module for video driver
+
+config VIDEO_VPFE_CAPTURE
+       tristate "VPFE Video Capture Driver"
+       depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
+       select VIDEOBUF_DMA_CONTIG
+       help
+         Support for DMx/AMx VPFE based frame grabber. This is the
+         common V4L2 module for following DMx/AMx SoCs from Texas
+         Instruments:- DM6446, DM365, DM355 & AM3517/05.
+
+         To compile this driver as a module, choose M here: the
+         module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+       tristate "DM6446 CCDC HW module"
+       depends on VIDEO_VPFE_CAPTURE
+       select VIDEO_VPSS_SYSTEM
+       default y
+       help
+          Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+          with decoder modules such as TVP5146 over BT656 or
+          sensor module such as MT9T001 over a raw interface. This
+          module configures the interface and CCDC/ISIF to do
+          video frame capture from slave decoders.
+
+          To compile this driver as a module, choose M here: the
+          module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+       tristate "DM355 CCDC HW module"
+       depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+       select VIDEO_VPSS_SYSTEM
+       default y
+       help
+          Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+          with decoder modules such as TVP5146 over BT656 or
+          sensor module such as MT9T001 over a raw interface. This
+          module configures the interface and CCDC/ISIF to do
+          video frame capture from a slave decoders
+
+          To compile this driver as a module, choose M here: the
+          module will be called vpfe.
+
+config VIDEO_ISIF
+       tristate "ISIF HW module"
+       depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+       select VIDEO_VPSS_SYSTEM
+       default y
+       help
+          Enables ISIF hw module. This is the hardware module for
+          configuring ISIF in VPFE to capture Raw Bayer RGB data  from
+          a image sensor or YUV data from a YUV source.
+
+          To compile this driver as a module, choose M here: the
+          module will be called vpfe.