return 1;
}
+/*
+ * Get address of physical disk used for an ioaccel2 mode command:
+ * 1. Extract ioaccel2 handle from the command.
+ * 2. Find a matching ioaccel2 handle from list of physical disks.
+ * 3. Return:
+ * 1 and set scsi3addr to address of matching physical
+ * 0 if no matching physical disk was found.
+ */
+static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
+ struct CommandList *ioaccel2_cmd_to_abort, unsigned char *scsi3addr)
+{
+ struct ReportExtendedLUNdata *physicals = NULL;
+ int responsesize = 24; /* size of physical extended response */
+ int extended = 2; /* flag forces reporting 'other dev info'. */
+ int reportsize = sizeof(*physicals) + HPSA_MAX_PHYS_LUN * responsesize;
+ u32 nphysicals = 0; /* number of reported physical devs */
+ int found = 0; /* found match (1) or not (0) */
+ u32 find; /* handle we need to match */
+ int i;
+ struct scsi_cmnd *scmd; /* scsi command within request being aborted */
+ struct hpsa_scsi_dev_t *d; /* device of request being aborted */
+ struct io_accel2_cmd *c2a; /* ioaccel2 command to abort */
+ u32 it_nexus; /* 4 byte device handle for the ioaccel2 cmd */
+ u32 scsi_nexus; /* 4 byte device handle for the ioaccel2 cmd */
+
+ if (ioaccel2_cmd_to_abort->cmd_type != CMD_IOACCEL2)
+ return 0; /* no match */
+
+ /* point to the ioaccel2 device handle */
+ c2a = &h->ioaccel2_cmd_pool[ioaccel2_cmd_to_abort->cmdindex];
+ if (c2a == NULL)
+ return 0; /* no match */
+
+ scmd = (struct scsi_cmnd *) ioaccel2_cmd_to_abort->scsi_cmd;
+ if (scmd == NULL)
+ return 0; /* no match */
+
+ d = scmd->device->hostdata;
+ if (d == NULL)
+ return 0; /* no match */
+
+ it_nexus = cpu_to_le32((u32) d->ioaccel_handle);
+ scsi_nexus = cpu_to_le32((u32) c2a->scsi_nexus);
+ find = c2a->scsi_nexus;
+
+ /* Get the list of physical devices */
+ physicals = kzalloc(reportsize, GFP_KERNEL);
+ if (hpsa_scsi_do_report_phys_luns(h, (struct ReportLUNdata *) physicals,
+ reportsize, extended)) {
+ dev_err(&h->pdev->dev,
+ "Can't lookup %s device handle: report physical LUNs failed.\n",
+ "HP SSD Smart Path");
+ kfree(physicals);
+ return 0;
+ }
+ nphysicals = be32_to_cpu(*((__be32 *)physicals->LUNListLength)) /
+ responsesize;
+
+
+ /* find ioaccel2 handle in list of physicals: */
+ for (i = 0; i < nphysicals; i++) {
+ /* handle is in bytes 28-31 of each lun */
+ if (memcmp(&((struct ReportExtendedLUNdata *)
+ physicals)->LUN[i][20], &find, 4) != 0) {
+ continue; /* didn't match */
+ }
+ found = 1;
+ memcpy(scsi3addr, &((struct ReportExtendedLUNdata *)
+ physicals)->LUN[i][0], 8);
+ break; /* found it */
+ }
+
+ kfree(physicals);
+ if (found)
+ return 1;
+ else
+ return 0;
+
+}
/*
* Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
* logdev. The number of luns in physdev and logdev are returned in
&h->ioaccel_cmd_pool[c->cmdindex];
*tagupper = cm1->Tag.upper;
*taglower = cm1->Tag.lower;
- } else {
- *tagupper = c->Header.Tag.upper;
- *taglower = c->Header.Tag.lower;
+ return;
+ }
+ if (c->cmd_type == CMD_IOACCEL2) {
+ struct io_accel2_cmd *cm2 = (struct io_accel2_cmd *)
+ &h->ioaccel2_cmd_pool[c->cmdindex];
+ *tagupper = cm2->Tag.upper;
+ *taglower = cm2->Tag.lower;
+ return;
}
+ *tagupper = c->Header.Tag.upper;
+ *taglower = c->Header.Tag.lower;
}
+
static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
struct CommandList *abort, int swizzle)
{
return NULL;
}
+/* ioaccel2 path firmware cannot handle abort task requests.
+ * Change abort requests to physical target reset, and send to the
+ * address of the physical disk used for the ioaccel 2 command.
+ * Return 0 on success (IO_OK)
+ * -1 on failure
+ */
+
+static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
+ unsigned char *scsi3addr, struct CommandList *abort)
+{
+ int rc = IO_OK;
+ struct scsi_cmnd *scmd; /* scsi command within request being aborted */
+ struct hpsa_scsi_dev_t *dev; /* device to which scsi cmd was sent */
+ unsigned char phys_scsi3addr[8]; /* addr of phys disk with volume */
+ unsigned char *psa = &phys_scsi3addr[0];
+
+ /* Get a pointer to the hpsa logical device. */
+ scmd = (struct scsi_cmnd *) abort->scsi_cmd;
+ dev = (struct hpsa_scsi_dev_t *)(scmd->device->hostdata);
+ if (dev == NULL) {
+ dev_warn(&h->pdev->dev,
+ "Cannot abort: no device pointer for command.\n");
+ return -1; /* not abortable */
+ }
+
+ if (!dev->offload_enabled) {
+ dev_warn(&h->pdev->dev,
+ "Can't abort: device is not operating in HP SSD Smart Path mode.\n");
+ return -1; /* not abortable */
+ }
+
+ /* Incoming scsi3addr is logical addr. We need physical disk addr. */
+ if (!hpsa_get_pdisk_of_ioaccel2(h, abort, psa)) {
+ dev_warn(&h->pdev->dev, "Can't abort: Failed lookup of physical address.\n");
+ return -1; /* not abortable */
+ }
+
+ /* send the reset */
+ rc = hpsa_send_reset(h, psa, HPSA_RESET_TYPE_TARGET);
+ if (rc != 0) {
+ dev_warn(&h->pdev->dev,
+ "Reset as abort: Failed on physical device at scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ psa[0], psa[1], psa[2], psa[3],
+ psa[4], psa[5], psa[6], psa[7]);
+ return rc; /* failed to reset */
+ }
+
+ /* wait for device to recover */
+ if (wait_for_device_to_become_ready(h, psa) != 0) {
+ dev_warn(&h->pdev->dev,
+ "Reset as abort: Failed: Device never recovered from reset: 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ psa[0], psa[1], psa[2], psa[3],
+ psa[4], psa[5], psa[6], psa[7]);
+ return -1; /* failed to recover */
+ }
+
+ /* device recovered */
+ dev_info(&h->pdev->dev,
+ "Reset as abort: Device recovered from reset: scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ psa[0], psa[1], psa[2], psa[3],
+ psa[4], psa[5], psa[6], psa[7]);
+
+ return rc; /* success */
+}
+
/* Some Smart Arrays need the abort tag swizzled, and some don't. It's hard to
* tell which kind we're dealing with, so we send the abort both ways. There
* shouldn't be any collisions between swizzled and unswizzled tags due to the
struct CommandList *c;
int rc = 0, rc2 = 0;
+ /* ioccelerator mode 2 commands should be aborted via the
+ * accelerated path, since RAID path is unaware of these commands,
+ * but underlying firmware can't handle abort TMF.
+ * Change abort to physical device reset.
+ */
+ if (abort->cmd_type == CMD_IOACCEL2)
+ return hpsa_send_reset_as_abort_ioaccel2(h, scsi3addr, abort);
+
/* we do not expect to find the swizzled tag in our queue, but
* check anyway just to be sure the assumptions which make this
* the case haven't become wrong.
projects / linux-beck.git / commitdiff