config SATA_MV
tristate "Marvell SATA support"
+ select GENERIC_PHY
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
/* board IDs by feature in alphabetical order */
board_ahci,
board_ahci_ign_iferr,
+ board_ahci_noncq,
board_ahci_nosntf,
board_ahci_yes_fbs,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ [board_ahci_noncq] = {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
[board_ahci_nosntf] = {
AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF),
.flags = AHCI_FLAG_COMMON,
{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */
{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */
+ /*
+ * Samsung SSDs found on some macbooks. NCQ times out.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=60731
+ */
+ { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq },
+
/* Enmotus */
{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
- } else if (vendor == 0x197b && devid == 0x2352) {
- /* chip found in Thermaltake BlackX Duet, jmicron JMB350? */
+ } else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) {
+ /*
+ * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350?
+ * 0x0325: jmicron JMB394.
+ */
ata_for_each_link(link, ap, EDGE) {
/* SRST breaks detection and disks get misclassified
* LPM disabled to avoid potential problems
return PTR_ERR(priv->clk);
}
- clk_prepare_enable(priv->clk);
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
host = ata_host_alloc(&pdev->dev, 1);
if (!host) {
struct ata_host *host = dev_get_drvdata(dev);
struct pata_imx_priv *priv = host->private_data;
- clk_prepare_enable(priv->clk);
+ int ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
__raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL);
if (!hpriv->port_phys)
return -ENOMEM;
host->private_data = hpriv;
- hpriv->n_ports = n_ports;
hpriv->board_idx = chip_soc;
host->iomap = NULL;
rc = PTR_ERR(hpriv->port_phys[port]);
hpriv->port_phys[port] = NULL;
if (rc != -EPROBE_DEFER)
- dev_warn(&pdev->dev, "error getting phy %d",
- rc);
+ dev_warn(&pdev->dev, "error getting phy %d", rc);
+
+ /* Cleanup only the initialized ports */
+ hpriv->n_ports = port;
goto err;
} else
phy_power_on(hpriv->port_phys[port]);
}
+ /* All the ports have been initialized */
+ hpriv->n_ports = n_ports;
+
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
clk_disable_unprepare(hpriv->clk);
clk_put(hpriv->clk);
}
- for (port = 0; port < n_ports; port++) {
+ for (port = 0; port < hpriv->n_ports; port++) {
if (!IS_ERR(hpriv->port_clks[port])) {
clk_disable_unprepare(hpriv->port_clks[port]);
clk_put(hpriv->port_clks[port]);
{ "ST380011ASL", SIL_QUIRK_MOD15WRITE },
{ "ST3120022ASL", SIL_QUIRK_MOD15WRITE },
{ "ST3160021ASL", SIL_QUIRK_MOD15WRITE },
+ { "TOSHIBA MK2561GSYN", SIL_QUIRK_MOD15WRITE },
{ "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX },
{ }
};