#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/system.h>
+#include <asm/pgtable.h>
#ifdef CONFIG_DEBUG_LL
#include <mach/debug-macro.S>
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
+#define PG_DIR_SIZE 0x4000
+#define PMD_ORDER 2
+
.globl swapper_pg_dir
- .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
+ .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
.macro pgtbl, rd, phys
- add \rd, \phys, #TEXT_OFFSET - 0x4000
+ add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE
.endm
#ifdef CONFIG_XIP_KERNEL
pgtbl r4, r8 @ page table address
/*
- * Clear the 16K level 1 swapper page table
+ * Clear the swapper page table
*/
mov r0, r4
mov r3, #0
- add r6, r0, #0x4000
+ add r6, r0, #PG_DIR_SIZE
1: str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
sub r0, r0, r3 @ virt->phys offset
add r5, r5, r0 @ phys __enable_mmu
add r6, r6, r0 @ phys __enable_mmu_end
- mov r5, r5, lsr #20
- mov r6, r6, lsr #20
+ mov r5, r5, lsr #SECTION_SHIFT
+ mov r6, r6, lsr #SECTION_SHIFT
-1: orr r3, r7, r5, lsl #20 @ flags + kernel base
- str r3, [r4, r5, lsl #2] @ identity mapping
- teq r5, r6
- addne r5, r5, #1 @ next section
- bne 1b
+1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base
+ str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping
+ cmp r5, r6
+ addlo r5, r5, #1 @ next section
+ blo 1b
/*
* Now setup the pagetables for our kernel direct
* mapped region.
*/
mov r3, pc
- mov r3, r3, lsr #20
- orr r3, r7, r3, lsl #20
- add r0, r4, #(KERNEL_START & 0xff000000) >> 18
- str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
+ mov r3, r3, lsr #SECTION_SHIFT
+ orr r3, r7, r3, lsl #SECTION_SHIFT
+ add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
+ str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
ldr r6, =(KERNEL_END - 1)
- add r0, r0, #4
- add r6, r4, r6, lsr #18
+ add r0, r0, #1 << PMD_ORDER
+ add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
- add r3, r3, #1 << 20
- strls r3, [r0], #4
+ add r3, r3, #1 << SECTION_SHIFT
+ strls r3, [r0], #1 << PMD_ORDER
bls 1b
#ifdef CONFIG_XIP_KERNEL
*/
add r3, r8, #TEXT_OFFSET
orr r3, r3, r7
- add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18
- str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
+ add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
+ str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]!
ldr r6, =(_end - 1)
add r0, r0, #4
- add r6, r4, r6, lsr #18
+ add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
add r3, r3, #1 << 20
strls r3, [r0], #4
* Then map boot params address in r2 or
* the first 1MB of ram if boot params address is not specified.
*/
- mov r0, r2, lsr #20
- movs r0, r0, lsl #20
+ mov r0, r2, lsr #SECTION_SHIFT
+ movs r0, r0, lsl #SECTION_SHIFT
moveq r0, r8
sub r3, r0, r8
add r3, r3, #PAGE_OFFSET
- add r3, r4, r3, lsr #18
+ add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
orr r6, r7, r0
str r6, [r3]
*/
addruart r7, r3
- mov r3, r3, lsr #20
- mov r3, r3, lsl #2
+ mov r3, r3, lsr #SECTION_SHIFT
+ mov r3, r3, lsl #PMD_ORDER
add r0, r4, r3
rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long)
cmp r3, #0x0800 @ limit to 512MB
movhi r3, #0x0800
add r6, r0, r3
- mov r3, r7, lsr #20
+ mov r3, r7, lsr #SECTION_SHIFT
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
- orr r3, r7, r3, lsl #20
+ orr r3, r7, r3, lsl #SECTION_SHIFT
1: str r3, [r0], #4
- add r3, r3, #1 << 20
- teq r0, r6
- bne 1b
+ add r3, r3, #1 << SECTION_SHIFT
+ cmp r0, r6
+ blo 1b
#else /* CONFIG_DEBUG_ICEDCC */
/* we don't need any serial debugging mappings for ICEDCC */
* If we're using the NetWinder or CATS, we also need to map
* in the 16550-type serial port for the debug messages
*/
- add r0, r4, #0xff000000 >> 18
+ add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
orr r3, r7, #0x7c000000
str r3, [r0]
#endif
* Similar reasons here - for debug. This is
* only for Acorn RiscPC architectures.
*/
- add r0, r4, #0x02000000 >> 18
+ add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
orr r3, r7, #0x02000000
str r3, [r0]
- add r0, r4, #0xd8000000 >> 18
+ add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0]
#endif
#endif
/*
* Clear out all the mappings below the kernel image.
*/
- for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
+ for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
/* The XIP kernel is mapped in the module area -- skip over it */
- addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+ addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
#endif
- for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+ for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*
* memory bank, up to the end of the vmalloc region.
*/
for (addr = __phys_to_virt(end);
- addr < VMALLOC_END; addr += PGDIR_SIZE)
+ addr < VMALLOC_END; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
}
+#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
+
/*
* Reserve the special regions of memory
*/
* Reserve the page tables. These are already in use,
* and can only be in node 0.
*/
- memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
+ memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
#ifdef CONFIG_SA1111
/*
*/
vectors_page = early_alloc(PAGE_SIZE);
- for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+ for (addr = VMALLOC_END; addr; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*