arm64: tegra: Add PCIe host bridge on Tegra210

Add the PCIe host bridge found on Tegra X1. It implements two root ports
that support x4 and x1 configurations, respectively.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>

diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 46045fe719daf378c4ebb46b753e47243284e3e4..2f832df29da8522bf05fdb1168580ea1ea105bbf 100644 (file)
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -11,6 +11,69 @@
        #address-cells = <2>;
        #size-cells = <2>;
 
+       pcie-controller@01003000 {
+               compatible = "nvidia,tegra210-pcie";
+               device_type = "pci";
+               reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+                      0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+                      0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+               reg-names = "pads", "afi", "cs";
+               interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                            <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+               interrupt-names = "intr", "msi";
+
+               #interrupt-cells = <1>;
+               interrupt-map-mask = <0 0 0 0>;
+               interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+               bus-range = <0x00 0xff>;
+               #address-cells = <3>;
+               #size-cells = <2>;
+
+               ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+                         0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+                         0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+                         0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+                         0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+               clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+                        <&tegra_car TEGRA210_CLK_AFI>,
+                        <&tegra_car TEGRA210_CLK_PLL_E>,
+                        <&tegra_car TEGRA210_CLK_CML0>;
+               clock-names = "pex", "afi", "pll_e", "cml";
+               resets = <&tegra_car 70>,
+                        <&tegra_car 72>,
+                        <&tegra_car 74>;
+               reset-names = "pex", "afi", "pcie_x";
+               status = "disabled";
+
+               pci@1,0 {
+                       device_type = "pci";
+                       assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+                       reg = <0x000800 0 0 0 0>;
+                       status = "disabled";
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       nvidia,num-lanes = <4>;
+               };
+
+               pci@2,0 {
+                       device_type = "pci";
+                       assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+                       reg = <0x001000 0 0 0 0>;
+                       status = "disabled";
+
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       nvidia,num-lanes = <1>;
+               };
+       };
+
        host1x@50000000 {
                compatible = "nvidia,tegra210-host1x", "simple-bus";
                reg = <0x0 0x50000000 0x0 0x00034000>;