obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
common.o gpio.o dma.o wd_timer.o
-omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o
+omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
endif
# PRCM
-obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm.o
-obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm.o
-obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm4xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
+# will be removed once the OMAP4 part of the codebase is converted to
+# use OMAP4-specific PRCM functions.
+obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cm4xxx.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
#include "clock.h"
#include "clock2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
#include "clock.h"
#include "clock2xxx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
static int omap2_enable_osc_ck(struct clk *clk)
#include "clock.h"
#include "clock2xxx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
void __iomem *prcm_clksrc_ctrl;
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
const struct prcm_config *curr_prcm_set;
#include <plat/clock.h>
#include "clock.h"
-#include "cm.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include <plat/prcm.h>
#include "clock.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "clock.h"
#include "clock2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/**
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "clock.h"
#include "clock34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/**
#include "clock.h"
#include "clock3517.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/*
#include "clock.h"
#include "clock3xxx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/*
#include "clock36xx.h"
#include "clock3517.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "cm-regbits-44xx.h"
-#include "prm.h"
+#include "prm44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
+/* OMAP4 modulemode control */
+#define OMAP4430_MODULEMODE_HWCTRL 0
+#define OMAP4430_MODULEMODE_SWCTRL 1
+
/* Root clocks */
static struct clk extalt_clkin_ck = {
#include <linux/bitops.h>
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
#include <plat/clock.h>
#include <plat/powerdomain.h>
#include <linux/io.h>
#include <plat/clockdomain.h>
-#include "cm.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
#include "cm-regbits-44xx.h"
#include <linux/io.h>
#include <plat/clockdomain.h>
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
* published by the Free Software Foundation.
*/
-#include "cm.h"
-
/* Bits shared between registers */
/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
* published by the Free Software Foundation.
*/
-#include "cm.h"
-
/* Bits shared between registers */
/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
-#include "cm.h"
-
-
/*
* Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP,
* CM_TESLA_DYNAMICDEP
-#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
-#define __ARCH_ASM_MACH_OMAP2_CM_H
-
/*
- * OMAP2/3 Clock Management (CM) register definitions
+ * OMAP2+ Clock Management prototypes
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include "prcm-common.h"
-
-#define OMAP2420_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-#define OMAP34XX_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-
-
-#include "cm44xx.h"
-
-/*
- * Architecture-specific global CM registers
- * Use cm_{read,write}_reg() with these registers.
- * These registers appear once per CM module.
- */
-
-#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
-
-#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
-/*
- * Module specific CM registers from CM_BASE + domain offset
- * Use cm_{read,write}_mod_reg() with these registers.
- * These register offsets generally appear in more than one PRCM submodule.
- */
-
-/* Common between 24xx and 34xx */
-
-#define CM_FCLKEN 0x0000
-#define CM_FCLKEN1 CM_FCLKEN
-#define CM_CLKEN CM_FCLKEN
-#define CM_ICLKEN 0x0010
-#define CM_ICLKEN1 CM_ICLKEN
-#define CM_ICLKEN2 0x0014
-#define CM_ICLKEN3 0x0018
-#define CM_IDLEST 0x0020
-#define CM_IDLEST1 CM_IDLEST
-#define CM_IDLEST2 0x0024
-#define CM_AUTOIDLE 0x0030
-#define CM_AUTOIDLE1 CM_AUTOIDLE
-#define CM_AUTOIDLE2 0x0034
-#define CM_AUTOIDLE3 0x0038
-#define CM_CLKSEL 0x0040
-#define CM_CLKSEL1 CM_CLKSEL
-#define CM_CLKSEL2 0x0044
-#define OMAP2_CM_CLKSTCTRL 0x0048
-#define OMAP4_CM_CLKSTCTRL 0x0000
-
-
-/* Architecture-specific registers */
-
-#define OMAP24XX_CM_FCLKEN2 0x0004
-#define OMAP24XX_CM_ICLKEN4 0x001c
-#define OMAP24XX_CM_AUTOIDLE4 0x003c
-
-#define OMAP2430_CM_IDLEST3 0x0028
-
-#define OMAP3430_CM_CLKEN_PLL 0x0004
-#define OMAP3430ES2_CM_CLKEN2 0x0004
-#define OMAP3430ES2_CM_FCLKEN3 0x0008
-#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
-#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
-#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
-#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
-#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
-#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
-#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
-#define OMAP3430_CM_CLKSTST 0x004c
-#define OMAP3430ES2_CM_CLKSEL4 0x004c
-#define OMAP3430ES2_CM_CLKSEL5 0x0050
-#define OMAP3430_CM_CLKSEL2_EMU 0x0050
-#define OMAP3430_CM_CLKSEL3_EMU 0x0054
-
-/* CM2.CEFUSE_CM2 register offsets */
-
-/* OMAP4 modulemode control */
-#define OMAP4430_MODULEMODE_HWCTRL 0
-#define OMAP4430_MODULEMODE_SWCTRL 1
-
-/* Clock management domain register get/set */
-
-#ifndef __ASSEMBLER__
-
-extern u32 cm_read_mod_reg(s16 module, u16 idx);
-extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-
-extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
- u8 idlest_shift);
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
-
-static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return cm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
-#endif
-
-/* CM register bits shared between 24XX and 3430 */
-
-/* CM_CLKSEL_GFX */
-#define OMAP_CLKSEL_GFX_SHIFT 0
-#define OMAP_CLKSEL_GFX_MASK (0x7 << 0)
-
-/* CM_ICLKEN_GFX */
-#define OMAP_EN_GFX_SHIFT 0
-#define OMAP_EN_GFX_MASK (1 << 0)
-
-/* CM_IDLEST_GFX */
-#define OMAP_ST_GFX_MASK (1 << 0)
-
-
-/* CM_IDLEST indicator */
-#define OMAP24XX_CM_IDLEST_VAL 0
-#define OMAP34XX_CM_IDLEST_VAL 1
+#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
+#define __ARCH_ASM_MACH_OMAP2_CM_H
/*
* MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <asm/atomic.h>
-
#include <plat/common.h>
#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
+
+u32 cm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(cm_base + module + idx);
+}
+
+void cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, cm_base + module + idx);
+}
+
+/* Read-modify-write a register in a CM module. Caller must lock */
+u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+ u32 v;
+
+ v = cm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ cm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+
+u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return cm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
/**
* omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
else
BUG();
- /* XXX should be OMAP2 CM */
omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
MAX_MODULE_READY_TIME, i);
--- /dev/null
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
+
+#include "prcm-common.h"
+
+#define OMAP2420_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+#define OMAP34XX_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* Common between OMAP2 and OMAP3 */
+
+#define CM_FCLKEN 0x0000
+#define CM_FCLKEN1 CM_FCLKEN
+#define CM_CLKEN CM_FCLKEN
+#define CM_ICLKEN 0x0010
+#define CM_ICLKEN1 CM_ICLKEN
+#define CM_ICLKEN2 0x0014
+#define CM_ICLKEN3 0x0018
+#define CM_IDLEST 0x0020
+#define CM_IDLEST1 CM_IDLEST
+#define CM_IDLEST2 0x0024
+#define CM_AUTOIDLE 0x0030
+#define CM_AUTOIDLE1 CM_AUTOIDLE
+#define CM_AUTOIDLE2 0x0034
+#define CM_AUTOIDLE3 0x0038
+#define CM_CLKSEL 0x0040
+#define CM_CLKSEL1 CM_CLKSEL
+#define CM_CLKSEL2 0x0044
+#define OMAP2_CM_CLKSTCTRL 0x0048
+
+/* OMAP2-specific register offsets */
+
+#define OMAP24XX_CM_FCLKEN2 0x0004
+#define OMAP24XX_CM_ICLKEN4 0x001c
+#define OMAP24XX_CM_AUTOIDLE4 0x003c
+
+#define OMAP2430_CM_IDLEST3 0x0028
+
+/* OMAP3-specific register offsets */
+
+#define OMAP3430_CM_CLKEN_PLL 0x0004
+#define OMAP3430ES2_CM_CLKEN2 0x0004
+#define OMAP3430ES2_CM_FCLKEN3 0x0008
+#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST 0x004c
+#define OMAP3430ES2_CM_CLKSEL4 0x004c
+#define OMAP3430ES2_CM_CLKSEL5 0x0050
+#define OMAP3430_CM_CLKSEL2_EMU 0x0050
+#define OMAP3430_CM_CLKSEL3_EMU 0x0054
+
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP24XX_CM_IDLEST_VAL 0
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+
+extern u32 cm_read_mod_reg(s16 module, u16 idx);
+extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
+extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+extern u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
+extern u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+
+#endif
+
+/* CM register bits shared between 24XX and 3430 */
+
+/* CM_CLKSEL_GFX */
+#define OMAP_CLKSEL_GFX_SHIFT 0
+#define OMAP_CLKSEL_GFX_MASK (0x7 << 0)
+
+/* CM_ICLKEN_GFX */
+#define OMAP_EN_GFX_SHIFT 0
+#define OMAP_EN_GFX_MASK (1 << 0)
+
+/* CM_IDLEST_GFX */
+#define OMAP_ST_GFX_MASK (1 << 0)
+
+#endif
#include "prcm-common.h"
+#include "cm.h"
#define OMAP4_CM_CLKSTCTRL 0x0000
#include <plat/common.h>
-#include "cm.h"
+#include "cm44xx.h"
#include "cm-regbits-44xx.h"
/**
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
-#include "cm.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
#include <asm/clkdev.h>
#include "clock.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
* published by the Free Software Foundation.
*/
+/*
+ * XXX The function pointers to the PRM/CM functions are incorrect and
+ * should be removed. No device driver should be changing PRM/CM bits
+ * directly; that's a layering violation -- those bits are the responsibility
+ * of the OMAP PM core code.
+ */
+
#include <linux/platform_device.h>
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
#include <plat/omap-pm.h>
#endif
#include <plat/omap_hwmod.h>
#include <plat/prcm.h>
-#include "cm.h"
-#include "prm.h"
+#include "cm2xxx_3xxx.h"
+#include "cm44xx.h"
+#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
/* Maximum microseconds to wait for OMAP module to softreset */
#include <plat/clockdomain.h>
#include <plat/dmtimer.h>
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
#include "pm.h"
int omap2_pm_debug;
#include <plat/dma.h>
#include <plat/board.h>
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "pm.h"
#include <asm/tlbflush.h>
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "sdrc.h"
#include "control.h"
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include "cm2xxx_3xxx.h"
+#include "cm44xx.h"
+#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include <plat/cpu.h>
#include <plat/powerdomain.h>
#include <plat/prcm.h>
+#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "powerdomains.h"
#include "powerdomains.h"
#include "prcm-common.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
/* 24XX powerdomains and dependencies */
#include "powerdomains.h"
#include "prcm-common.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/*
#include "powerdomains.h"
#include "prcm-common.h"
-#include "prm.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
#include "prcm_mpu44xx.h"
*/
#define MAX_MODULE_HARDRESET_WAIT 10000
+# ifndef __ASSEMBLER__
+extern void __iomem *prm_base;
+extern void __iomem *cm_base;
+extern void __iomem *cm2_base;
+# endif
+
#endif
#include "clock.h"
#include "clock2xxx.h"
-#include "cm.h"
-#include "prm.h"
+#include "cm2xxx_3xxx.h"
+#include "cm44xx.h"
+#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
-static void __iomem *prm_base;
-static void __iomem *cm_base;
-static void __iomem *cm2_base;
+void __iomem *prm_base;
+void __iomem *cm_base;
+void __iomem *cm2_base;
#define MAX_MODULE_ENABLE_WAIT 100000
prcm_offs, OMAP4_RM_RSTCTRL);
}
-static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
-{
- BUG_ON(!base);
- return __raw_readl(base + module + reg);
-}
-
-static inline void __omap_prcm_write(u32 value, void __iomem *base,
- s16 module, u16 reg)
-{
- BUG_ON(!base);
- __raw_writel(value, base + module + reg);
-}
-
-/* Read a register in a PRM module */
-u32 prm_read_mod_reg(s16 module, u16 idx)
-{
- return __omap_prcm_read(prm_base, module, idx);
-}
-
-/* Write into a register in a PRM module */
-void prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __omap_prcm_write(val, prm_base, module, idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = prm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- prm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- u32 v;
-
- v = prm_read_mod_reg(domain, idx);
- v &= mask;
- v >>= __ffs(mask);
-
- return v;
-}
-
/* Read a PRM register, AND it, and shift the result down to bit 0 */
u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
{
return v;
}
-/* Read a register in a CM module */
-u32 cm_read_mod_reg(s16 module, u16 idx)
-{
- return __omap_prcm_read(cm_base, module, idx);
-}
-
-/* Write into a register in a CM module */
-void cm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __omap_prcm_write(val, cm_base, module, idx);
-}
-
-/* Read-modify-write a register in a CM module. Caller must lock */
-u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = cm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- cm_write_mod_reg(v, module, idx);
-
- return v;
-}
/**
* omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
*
* Returns 1 if the module indicated readiness in time, or 0 if it
* failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ *
+ * XXX This function is deprecated. It should be removed once the
+ * hwmod conversion is complete.
*/
int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
const char *name)
* published by the Free Software Foundation.
*/
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
/* Bits shared between registers */
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-
/*
* OMAP3430 Power/Reset Management register bits
*
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
/* Shared register bits */
#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
-#include "prm.h"
-
/*
* Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_H
-
/*
- * OMAP2/3 Power/Reset Management (PRM) register definitions
+ * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
- * Written by Paul Walmsley
+ * Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_H
#include "prcm-common.h"
-#define OMAP2420_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-#define OMAP34XX_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-
-/*
- * Architecture-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx, and PRM_* on 34xx. (The exceptions are the
- * IRQSTATUS and IRQENABLE bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET 0x0000
-#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
-#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
-#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
-#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
-#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
-#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3_PRM_REVISION_OFFSET 0x0004
-#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
-#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
-#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
-#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
-#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
-#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
-#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3_PRM_RSTST_OFFSET 0x0058
-#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
-#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
-#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
-#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
-#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
-#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
-#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
-#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
-#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
-#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
-#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
-#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
-/*
- * Module specific PRM registers from PRM_BASE + domain offset
- *
- * Use prm_{read,write}_mod_reg() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * {PM,RM}_* on both architectures. (The exceptions are the IRQSTATUS
- * and IRQENABLE bits.)
- *
- */
-
-/* Registers appearing on both 24xx and 34xx */
-
-#define OMAP2_RM_RSTCTRL 0x0050
-#define OMAP2_RM_RSTTIME 0x0054
-#define OMAP2_RM_RSTST 0x0058
-#define OMAP2_PM_PWSTCTRL 0x00e0
-#define OMAP2_PM_PWSTST 0x00e4
-
-#define PM_WKEN 0x00a0
-#define PM_WKEN1 PM_WKEN
-#define PM_WKST 0x00b0
-#define PM_WKST1 PM_WKST
-#define PM_WKDEP 0x00c8
-#define PM_EVGENCTRL 0x00d4
-#define PM_EVGENONTIM 0x00d8
-#define PM_EVGENOFFTIM 0x00dc
-
-/* Omap2 specific registers */
-#define OMAP24XX_PM_WKEN2 0x00a4
-#define OMAP24XX_PM_WKST2 0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
-
-/* Omap3 specific registers */
-#define OMAP3430ES2_PM_WKEN3 0x00f0
-#define OMAP3430ES2_PM_WKST3 0x00b8
-
-#define OMAP3430_PM_MPUGRPSEL 0x00a4
-#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
-#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
-
-#define OMAP3430_PM_IVAGRPSEL 0x00a8
-#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
-#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
-
-#define OMAP3430_PM_PREPWSTST 0x00e8
-
-#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
-#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
-
-
-#ifndef __ASSEMBLER__
-
-/* Power/reset management domain register get/set */
-extern u32 prm_read_mod_reg(s16 module, u16 idx);
-extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-
-/* Read-modify-write bits in a PRM register (by domain) */
-static inline u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
-/* These omap2_ PRM functions apply to both OMAP2 and 3 */
-int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
-int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
-
-#endif
-
-/*
- * Bits common to specific registers
- *
- * The 3430 register and bit names are generally used,
- * since they tend to make more sense
- */
-
-/* PM_EVGENONTIM_MPU */
-/* Named PM_EVEGENONTIM_MPU on the 24XX */
-#define OMAP_ONTIMEVAL_SHIFT 0
-#define OMAP_ONTIMEVAL_MASK (0xffffffff << 0)
-
-/* PM_EVGENOFFTIM_MPU */
-/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
-#define OMAP_OFFTIMEVAL_SHIFT 0
-#define OMAP_OFFTIMEVAL_MASK (0xffffffff << 0)
-
-/* PRM_CLKSETUP and PRCM_VOLTSETUP */
-/* Named PRCM_CLKSSETUP on the 24XX */
-#define OMAP_SETUP_TIME_SHIFT 0
-#define OMAP_SETUP_TIME_MASK (0xffff << 0)
-
-/* PRM_CLKSRC_CTRL */
-/* Named PRCM_CLKSRC_CTRL on the 24XX */
-#define OMAP_SYSCLKDIV_SHIFT 6
-#define OMAP_SYSCLKDIV_MASK (0x3 << 6)
-#define OMAP_AUTOEXTCLKMODE_SHIFT 3
-#define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3)
-#define OMAP_SYSCLKSEL_SHIFT 0
-#define OMAP_SYSCLKSEL_MASK (0x3 << 0)
-
-/* PM_EVGENCTRL_MPU */
-#define OMAP_OFFLOADMODE_SHIFT 3
-#define OMAP_OFFLOADMODE_MASK (0x3 << 3)
-#define OMAP_ONLOADMODE_SHIFT 1
-#define OMAP_ONLOADMODE_MASK (0x3 << 1)
-#define OMAP_ENABLE_MASK (1 << 0)
-
-/* PRM_RSTTIME */
-/* Named RM_RSTTIME_WKUP on the 24xx */
-#define OMAP_RSTTIME2_SHIFT 8
-#define OMAP_RSTTIME2_MASK (0x1f << 8)
-#define OMAP_RSTTIME1_SHIFT 0
-#define OMAP_RSTTIME1_MASK (0xff << 0)
-
-/* PRM_RSTCTRL */
-/* Named RM_RSTCTRL_WKUP on the 24xx */
-/* 2420 calls RST_DPLL3 'RST_DPLL' */
-#define OMAP_RST_DPLL3_MASK (1 << 2)
-#define OMAP_RST_GS_MASK (1 << 1)
-
-
-/*
- * Bits common to module-shared registers
- *
- * Not all registers of a particular type support all of these bits -
- * check TRM if you are unsure
- */
-
/*
* 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
*
#define OMAP_POWERSTATEST_SHIFT 0
#define OMAP_POWERSTATEST_MASK (0x3 << 0)
-/*
- * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
- * called 'COREWKUP_RST'
- *
- * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
- * RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
- */
-#define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3)
-
-/*
- * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
- *
- * 2430: RM_RSTST_MDM
- *
- * 3430: RM_RSTST_CORE, RM_RSTST_EMU
- */
-#define OMAP_DOMAINWKUP_RST_MASK (1 << 2)
-
-/*
- * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
- * On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
- *
- * 2430: RM_RSTST_MDM
- *
- * 3430: RM_RSTST_CORE, RM_RSTST_EMU
- */
-#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
-#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
-
-/*
- * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
- * 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
- *
- * 2430: PM_WKDEP_MDM
- *
- * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
- * PM_WKDEP_PER
- */
-#define OMAP_EN_WKUP_SHIFT 4
-#define OMAP_EN_WKUP_MASK (1 << 4)
-
-/*
- * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
- * PM_PWSTCTRL_DSP
- *
- * 2430: PM_PWSTCTRL_MDM
- *
- * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
- * PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
- * PM_PWSTCTRL_NEON
- */
-#define OMAP_LOGICRETSTATE_MASK (1 << 2)
-
/*
* 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
* PM_PWSTCTRL_DSP, PM_PWSTST_MPU
#define OMAP_POWERSTATE_MASK (0x3 << 0)
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT 10000
-
-
#endif
*/
#include <linux/kernel.h>
-#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
+#include <linux/io.h>
#include <plat/common.h>
#include <plat/cpu.h>
#include <plat/prcm.h>
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
+u32 prm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(prm_base + module + idx);
+}
+
+void prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, prm_base + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+ u32 v;
+
+ v = prm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ prm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = prm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
+
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
--- /dev/null
+/*
+ * OMAP2/3 Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+
+#define OMAP2420_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+#define OMAP34XX_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP2-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ *
+ */
+
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+/*
+ * OMAP3-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ */
+
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific PRM register offsets from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ */
+
+/* Register offsets appearing on both OMAP2 and OMAP3 */
+
+#define OMAP2_RM_RSTCTRL 0x0050
+#define OMAP2_RM_RSTTIME 0x0054
+#define OMAP2_RM_RSTST 0x0058
+#define OMAP2_PM_PWSTCTRL 0x00e0
+#define OMAP2_PM_PWSTST 0x00e4
+
+#define PM_WKEN 0x00a0
+#define PM_WKEN1 PM_WKEN
+#define PM_WKST 0x00b0
+#define PM_WKST1 PM_WKST
+#define PM_WKDEP 0x00c8
+#define PM_EVGENCTRL 0x00d4
+#define PM_EVGENONTIM 0x00d8
+#define PM_EVGENOFFTIM 0x00dc
+
+/* OMAP2xxx specific register offsets */
+#define OMAP24XX_PM_WKEN2 0x00a4
+#define OMAP24XX_PM_WKST2 0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
+
+/* OMAP3 specific register offsets */
+#define OMAP3430ES2_PM_WKEN3 0x00f0
+#define OMAP3430ES2_PM_WKST3 0x00b8
+
+#define OMAP3430_PM_MPUGRPSEL 0x00a4
+#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
+
+#define OMAP3430_PM_IVAGRPSEL 0x00a8
+#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
+
+#define OMAP3430_PM_PREPWSTST 0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
+
+
+#ifndef __ASSEMBLER__
+
+/* Power/reset management domain register get/set */
+extern u32 prm_read_mod_reg(s16 module, u16 idx);
+extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+extern u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
+extern u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+extern u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+
+/* These omap2_ PRM functions apply to both OMAP2 and 3 */
+extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
+extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
+extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
+
+#endif
+
+/*
+ * Bits common to specific registers
+ *
+ * The 3430 register and bit names are generally used,
+ * since they tend to make more sense
+ */
+
+/* PM_EVGENONTIM_MPU */
+/* Named PM_EVEGENONTIM_MPU on the 24XX */
+#define OMAP_ONTIMEVAL_SHIFT 0
+#define OMAP_ONTIMEVAL_MASK (0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
+#define OMAP_OFFTIMEVAL_SHIFT 0
+#define OMAP_OFFTIMEVAL_MASK (0xffffffff << 0)
+
+/* PRM_CLKSETUP and PRCM_VOLTSETUP */
+/* Named PRCM_CLKSSETUP on the 24XX */
+#define OMAP_SETUP_TIME_SHIFT 0
+#define OMAP_SETUP_TIME_MASK (0xffff << 0)
+
+/* PRM_CLKSRC_CTRL */
+/* Named PRCM_CLKSRC_CTRL on the 24XX */
+#define OMAP_SYSCLKDIV_SHIFT 6
+#define OMAP_SYSCLKDIV_MASK (0x3 << 6)
+#define OMAP_AUTOEXTCLKMODE_SHIFT 3
+#define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3)
+#define OMAP_SYSCLKSEL_SHIFT 0
+#define OMAP_SYSCLKSEL_MASK (0x3 << 0)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP_OFFLOADMODE_SHIFT 3
+#define OMAP_OFFLOADMODE_MASK (0x3 << 3)
+#define OMAP_ONLOADMODE_SHIFT 1
+#define OMAP_ONLOADMODE_MASK (0x3 << 1)
+#define OMAP_ENABLE_MASK (1 << 0)
+
+/* PRM_RSTTIME */
+/* Named RM_RSTTIME_WKUP on the 24xx */
+#define OMAP_RSTTIME2_SHIFT 8
+#define OMAP_RSTTIME2_MASK (0x1f << 8)
+#define OMAP_RSTTIME1_SHIFT 0
+#define OMAP_RSTTIME1_MASK (0xff << 0)
+
+/* PRM_RSTCTRL */
+/* Named RM_RSTCTRL_WKUP on the 24xx */
+/* 2420 calls RST_DPLL3 'RST_DPLL' */
+#define OMAP_RST_DPLL3_MASK (1 << 2)
+#define OMAP_RST_GS_MASK (1 << 1)
+
+
+/*
+ * Bits common to module-shared registers
+ *
+ * Not all registers of a particular type support all of these bits -
+ * check TRM if you are unsure
+ */
+
+/*
+ * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
+ * called 'COREWKUP_RST'
+ *
+ * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
+ * RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
+ */
+#define OMAP_COREDOMAINWKUP_RST_MASK (1 << 3)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_DOMAINWKUP_RST_MASK (1 << 2)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
+ * On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
+#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
+
+/*
+ * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
+ * 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
+ *
+ * 2430: PM_WKDEP_MDM
+ *
+ * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
+ * PM_WKDEP_PER
+ */
+#define OMAP_EN_WKUP_SHIFT 4
+#define OMAP_EN_WKUP_MASK (1 << 4)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ * PM_PWSTCTRL_DSP
+ *
+ * 2430: PM_PWSTCTRL_MDM
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ * PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ * PM_PWSTCTRL_NEON
+ */
+#define OMAP_LOGICRETSTATE_MASK (1 << 2)
+
+
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT 10000
+
+
+#endif
#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
#include "prcm-common.h"
+#include "prm.h"
#define OMAP4430_PRM_BASE 0x4a306000
#include <plat/clock.h>
#include <plat/sram.h>
-#include "prm.h"
-
#include <plat/sdrc.h>
#include "sdrc.h"
#include <plat/clock.h>
#include <plat/sram.h>
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "clock.h"
#include <plat/sdrc.h>
#include "sdrc.h"
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "pm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include <plat/sram.h>
#include <mach/io.h>
-#include "cm.h"
-#include "prm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
#include "sdrc.h"
#include "control.h"
#include <mach/io.h>
#include <mach/hardware.h>
-#include "prm.h"
-#include "cm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
#include "sdrc.h"
.text
#include <mach/io.h>
#include <mach/hardware.h>
-#include "prm.h"
-#include "cm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
#include "sdrc.h"
.text
#include <mach/io.h>
#include "sdrc.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
.text
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
+#include <linux/delay.h>
+
#include <plat/i2c.h>
struct sys_timer;
void omap3_prcm_save_context(void);
void omap3_prcm_restore_context(void);
-u32 prm_read_mod_reg(s16 module, u16 idx);
-void prm_write_mod_reg(u32 val, s16 module, u16 idx);
-u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
-u32 cm_read_mod_reg(s16 module, u16 idx);
-void cm_write_mod_reg(u32 val, s16 module, u16 idx);
-u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
#endif
#include <plat/dma.h>
#include <plat/mcbsp.h>
+/* XXX These "sideways" includes are a sign that something is wrong */
+#include "../mach-omap2/cm2xxx_3xxx.h"
#include "../mach-omap2/cm-regbits-34xx.h"
struct omap_mcbsp **mcbsp_ptr;
#include "sram.h"
#include "fb.h"
+
+/* XXX These "sideways" includes are a sign that something is wrong */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-# include "../mach-omap2/prm.h"
-# include "../mach-omap2/cm.h"
+# include "../mach-omap2/prm2xxx_3xxx.h"
# include "../mach-omap2/sdrc.h"
#endif
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+/*
+ * XXX These mach-omap2/ includes are wrong and should be removed. No
+ * driver should read or write to PRM/CM registers directly; they
+ * should rely on OMAP core code to do this.
+ */
+#include <mach-omap2/cm2xxx_3xxx.h>
#include <mach-omap2/prm-regbits-34xx.h>
#include <mach-omap2/cm-regbits-34xx.h>
#include <dspbridge/devdefs.h>
projects / linux-beck.git / commitdiff