#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Au1000 CPU, generic files.
+# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
obj-y += prom.o irq.o puts.o time.o reset.o \
struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
- { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
- { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
- { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- /*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
- { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
+ { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
- { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
#elif defined(CONFIG_SOC_AU1200)
- { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
#else
#error "Error: Unknown Alchemy SOC"
};
int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
-
/*
* BRIEF MODULE DESCRIPTION
- * Simple Au1000 clocks routines.
+ * Simple Au1xx0 clocks routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#include <linux/module.h>
#include <asm/mach-au1x00/au1000.h>
-static unsigned int au1x00_clock; // Hz
-static unsigned int lcd_clock; // KHz
+static unsigned int au1x00_clock; /* Hz */
+static unsigned int lcd_clock; /* KHz */
static unsigned long uart_baud_base;
/*
return au1x00_clock;
}
-
-
/*
* The UART baud base is not known at compile time ... if
* we want to be able to use the same code on different
void set_au1x00_lcd_clock(void)
{
unsigned int static_cfg0;
- unsigned int sys_busclk =
- (get_au1x00_speed()/1000) /
- ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2);
+ unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
+ ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
static_cfg0 = au_readl(MEM_STCFG0);
- if (static_cfg0 & (1<<11))
+ if (static_cfg0 & (1 << 11))
lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
else
lcd_clock = sys_busclk / 4;
if (lcd_clock > 50000) /* Epson MAX */
- printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
+ printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
+ lcd_clock);
}
unsigned int get_au1x00_lcd_clock(void)
{
return lcd_clock;
}
-
EXPORT_SYMBOL(get_au1x00_lcd_clock);
#include <asm/mach-au1x00/au1000.h>
-struct cpu_spec* cur_cpu_spec[NR_CPUS];
+struct cpu_spec *cur_cpu_spec[NR_CPUS];
/* With some thought, we can probably use the mask to reduce the
* size of the table.
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
-void
-set_cpuspec(void)
+void set_cpuspec(void)
{
struct cpu_spec *sp;
u32 prid;
*/
static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
-/* I couldn't find a macro that did this......
-*/
+/* I couldn't find a macro that did this... */
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized=0;
+static int dbdma_initialized;
static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
-static dbdev_tab_t *
-find_dbdev_id(u32 id)
+static dbdev_tab_t *find_dbdev_id(u32 id)
{
int i;
dbdev_tab_t *p;
return NULL;
}
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
{
- return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+ return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
}
EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
-u32
-au1xxx_ddma_add_device(dbdev_tab_t *dev)
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
{
u32 ret = 0;
- dbdev_tab_t *p=NULL;
- static u16 new_id=0x1000;
+ dbdev_tab_t *p;
+ static u16 new_id = 0x1000;
p = find_dbdev_id(~0);
- if ( NULL != p )
- {
+ if (NULL != p) {
memcpy(p, dev, sizeof(dbdev_tab_t));
p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
ret = p->dev_id;
new_id++;
#if 0
- printk("add_device: id:%x flags:%x padd:%x\n",
- p->dev_id, p->dev_flags, p->dev_physaddr );
+ printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr);
#endif
}
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
-/* Allocate a channel and return a non-zero descriptor if successful.
-*/
-u32
-au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+/* Allocate a channel and return a non-zero descriptor if successful. */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
{
unsigned long flags;
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
- /* We do the intialization on the first channel allocation.
+ /*
+ * We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
* which can't be done successfully during board set up.
*/
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((stp = find_dbdev_id(srcid)) == NULL)
+ stp = find_dbdev_id(srcid);
+ if (stp == NULL)
return 0;
- if ((dtp = find_dbdev_id(destid)) == NULL)
+ dtp = find_dbdev_id(destid);
+ if (dtp == NULL)
return 0;
used = 0;
rv = 0;
- /* Check to see if we can get both channels.
- */
+ /* Check to see if we can get both channels. */
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
(stp->dev_flags & DEV_FLAGS_ANYUSE)) {
(dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
/* Got destination */
dtp->dev_flags |= DEV_FLAGS_INUSE;
- }
- else {
- /* Can't get dest. Release src.
- */
+ } else {
+ /* Can't get dest. Release src. */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
used++;
}
- }
- else {
+ } else
used++;
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (!used) {
- /* Let's see if we can allocate a channel for it.
- */
+ /* Let's see if we can allocate a channel for it. */
ctp = NULL;
chan = 0;
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
- for (i=0; i<NUM_DBDMA_CHANS; i++) {
+ for (i = 0; i < NUM_DBDMA_CHANS; i++)
if (chan_tab_ptr[i] == NULL) {
- /* If kmalloc fails, it is caught below same
+ /*
+ * If kmalloc fails, it is caught below same
* as a channel not available.
*/
ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
chan_tab_ptr[i] = ctp;
break;
}
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (ctp != NULL) {
ctp->chan_callback = callback;
ctp->chan_callparam = callparam;
- /* Initialize channel configuration.
- */
+ /* Initialize channel configuration. */
i = 0;
if (stp->dev_intlevel)
i |= DDMA_CFG_SED;
* operations.
*/
rv = (u32)(&chan_tab_ptr[chan]);
- }
- else {
+ } else {
/* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
-/* Set the device width if source or destination is a FIFO.
+/*
+ * Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
*/
-u32
-au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
{
u32 rv;
chan_tab_t *ctp;
}
EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
-/* Allocate a descriptor ring, initializing as much as possible.
-*/
-u32
-au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
+/* Allocate a descriptor ring, initializing as much as possible. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
{
int i;
u32 desc_base, srcid, destid;
dbdev_tab_t *stp, *dtp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
- /* The descriptors must be 32-byte aligned. There is a
+ /*
+ * The descriptors must be 32-byte aligned. There is a
* possibility the allocation will give us such an address,
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
- GFP_KERNEL|GFP_DMA);
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
if (desc_base & 0x1f) {
- /* Lost....do it again, allocate extra, and round
+ /*
+ * Lost....do it again, allocate extra, and round
* the address base.
*/
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
+ desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
+ if (desc_base == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
}
dp = (au1x_ddma_desc_t *)desc_base;
- /* Keep track of the base descriptor.
- */
+ /* Keep track of the base descriptor. */
ctp->chan_desc_base = dp;
- /* Initialize the rings with as much information as we know.
- */
+ /* Initialize the rings with as much information as we know. */
srcid = stp->dev_id;
destid = dtp->dev_id;
cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
- /* is it mem to mem transfer? */
- if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
- ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
- cmd0 |= DSCR_CMD0_MEM;
- }
+ /* Is it mem to mem transfer? */
+ if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+ ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
+ cmd0 |= DSCR_CMD0_MEM;
switch (stp->dev_devwidth) {
case 8:
break;
}
- /* If the device is marked as an in/out FIFO, ensure it is
+ /*
+ * If the device is marked as an in/out FIFO, ensure it is
* set non-coherent.
*/
if (stp->dev_flags & DEV_FLAGS_IN)
- cmd0 |= DSCR_CMD0_SN; /* Source in fifo */
+ cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
if (dtp->dev_flags & DEV_FLAGS_OUT)
- cmd0 |= DSCR_CMD0_DN; /* Destination out fifo */
+ cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
- /* Set up source1. For now, assume no stride and increment.
+ /*
+ * Set up source1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (stp->dev_tsize) {
break;
}
- /* If source input is fifo, set static address.
- */
+ /* If source input is FIFO, set static address. */
if (stp->dev_flags & DEV_FLAGS_IN) {
- if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
else
- src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
-
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
}
+
if (stp->dev_physaddr)
src0 = stp->dev_physaddr;
- /* Set up dest1. For now, assume no stride and increment.
+ /*
+ * Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (dtp->dev_tsize) {
break;
}
- /* If destination output is fifo, set static address.
- */
+ /* If destination output is FIFO, set static address. */
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
- else
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
+ if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+
if (dtp->dev_physaddr)
dest0 = dtp->dev_physaddr;
#if 0
- printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+ printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
+ "source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
+ src1, dest0, dest1);
#endif
- for (i=0; i<entries; i++) {
+ for (i = 0; i < entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
dp->dscr_source0 = src0;
dp++;
}
- /* Make last descrptor point to the first.
- */
+ /* Make last descrptor point to the first. */
dp--;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- return (u32)(ctp->chan_desc_base);
+ return (u32)ctp->chan_desc_base;
}
EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
-/* Put a source buffer into the DMA ring.
+/*
+ * Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
-u32
-_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
- ctp = *((chan_tab_t **)chanid);
+ ctp = *(chan_tab_t **)chanid;
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
- if (dp->dscr_cmd0 & DSCR_CMD0_V) {
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- }
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count. */
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- /* Check flags */
+ /* Check flags */
if (flags & DDMA_FLAGS_IE)
dp->dscr_cmd0 |= DSCR_CMD0_IE;
if (flags & DDMA_FLAGS_NOIE)
/*
* There is an errata on the Au1200/Au1550 parts that could result
- * in "stale" data being DMA'd. It has to do with the snoop logic on
- * the dache eviction buffer. NONCOHERENT_IO is on by default for
- * these parts. If it is fixedin the future, these dma_cache_inv will
+ * in "stale" data being DMA'ed. It has to do with the snoop logic on
+ * the cache eviction buffer. DMA_NONCOHERENT is on by default for
+ * these parts. If it is fixed in the future, these dma_cache_inv will
* just be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_wback_inv((unsigned long)buf, nbytes);
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
#if 0
- printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
- dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+ printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
#endif
/*
* There is an errata on the Au1200/Au1550 parts that could result in
- * "stale" data being DMA'd. It has to do with the snoop logic on the
- * dache eviction buffer. NONCOHERENT_IO is on by default for these
- * parts. If it is fixedin the future, these dma_cache_inv will just
+ * "stale" data being DMA'ed. It has to do with the snoop logic on the
+ * cache eviction buffer. DMA_NONCOHERENT is on by default for these
+ * parts. If it is fixed in the future, these dma_cache_inv will just
* be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
-/* Get a destination buffer into the DMA ring.
+/*
+ * Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
* to memory transfers. This does not set the valid bit, you will
* have to put another destination buffer to keep the DMA going.
*/
-u32
-au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
u32 rv;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->get_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Return buffer address and byte count.
- */
+ /* Return buffer address and byte count. */
*buf = (void *)(phys_to_virt(dp->dscr_dest0));
*nbytes = dp->dscr_cmd1;
rv = dp->dscr_stat;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
-void
-au1xxx_dbdma_stop(u32 chanid)
+void au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
udelay(1);
halt_timeout++;
if (halt_timeout > 100) {
- printk("warning: DMA channel won't halt\n");
+ printk(KERN_WARNING "warning: DMA channel won't halt\n");
break;
}
}
}
EXPORT_SYMBOL(au1xxx_dbdma_stop);
-/* Start using the current descriptor pointer. If the dbdma encounters
- * a not valid descriptor, it will stop. In this case, we can just
+/*
+ * Start using the current descriptor pointer. If the DBDMA encounters
+ * a non-valid descriptor, it will stop. In this case, we can just
* continue by adding a buffer to the list and starting again.
*/
-void
-au1xxx_dbdma_start(u32 chanid)
+void au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
}
EXPORT_SYMBOL(au1xxx_dbdma_start);
-void
-au1xxx_dbdma_reset(u32 chanid)
+void au1xxx_dbdma_reset(u32 chanid)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
ctp = *((chan_tab_t **)chanid);
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- /* Run through the descriptors and reset the valid indicator.
- */
+ /* Run through the descriptors and reset the valid indicator. */
dp = ctp->chan_desc_base;
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
- /* reset our SW status -- this is used to determine
- * if a descriptor is in use by upper level SW. Since
+ /*
+ * Reset our software status -- this is used to determine
+ * if a descriptor is in use by upper level software. Since
* posting can reset 'V' bit.
*/
dp->sw_status = 0;
}
EXPORT_SYMBOL(au1xxx_dbdma_reset);
-u32
-au1xxx_get_dma_residue(u32 chanid)
+u32 au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
ctp = *((chan_tab_t **)chanid);
cp = ctp->chan_ptr;
- /* This is only valid if the channel is stopped.
- */
+ /* This is only valid if the channel is stopped. */
rv = cp->ddma_bytecnt;
au_sync();
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
-void
-au1xxx_dbdma_chan_free(u32 chanid)
+void au1xxx_dbdma_chan_free(u32 chanid)
{
chan_tab_t *ctp;
dbdev_tab_t *stp, *dtp;
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
-static irqreturn_t
-dbdma_interrupt(int irq, void *dev_id)
+static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
{
u32 intstat;
u32 chan_index;
cp = ctp->chan_ptr;
dp = ctp->cur_ptr;
- /* Reset interrupt.
- */
+ /* Reset interrupt. */
cp->ddma_irq = 0;
au_sync();
if (ctp->chan_callback)
- (ctp->chan_callback)(irq, ctp->chan_callparam);
+ ctp->chan_callback(irq, ctp->chan_callparam);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
return IRQ_RETVAL(1);
if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr))
- printk("Can't get 1550 dbdma irq");
+ printk(KERN_ERR "Can't get 1550 dbdma irq");
}
-void
-au1xxx_dbdma_dump(u32 chanid)
+void au1xxx_dbdma_dump(u32 chanid)
{
- chan_tab_t *ctp;
- au1x_ddma_desc_t *dp;
- dbdev_tab_t *stp, *dtp;
- au1x_dma_chan_t *cp;
- u32 i = 0;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ dbdev_tab_t *stp, *dtp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
cp = ctp->chan_ptr;
- printk("Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
- (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab);
- printk("desc base %x, get %x, put %x, cur %x\n",
- (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
- (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
-
- printk("dbdma chan %x\n", (u32)cp);
- printk("cfg %08x, desptr %08x, statptr %08x\n",
- cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
- printk("dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
- cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, cp->ddma_bytecnt);
-
-
- /* Run through the descriptors
- */
+ printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
+ (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
+ dtp - dbdev_tab);
+ printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
+ (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
+ (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
+
+ printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
+ printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
+ cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
+ printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
+ cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
+ cp->ddma_bytecnt);
+
+ /* Run through the descriptors */
dp = ctp->chan_desc_base;
do {
- printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
- i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
- printk("stat %08x, nxtptr %08x\n",
- dp->dscr_stat, dp->dscr_nxtptr);
+ printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1,
+ dp->dscr_dest0, dp->dscr_dest1);
+ printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
/* Put a descriptor into the DMA ring.
* This updates the source/destination pointers and byte count.
*/
-u32
-au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- u32 nbytes=0;
+ u32 nbytes = 0;
- /* I guess we could check this to be within the
- * range of the table......
- */
+ /*
+ * I guess we could check this to be within the
+ * range of the table......
+ */
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
- * an interrupt doesn't affect this pointer nor the descriptor,
- * so no locking should be needed.
- */
+ /*
+ * We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
- * engine, so just return an error condition.
- */
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer addresses and byte count.
- */
+ /* Load up buffer addresses and byte count. */
dp->dscr_dest0 = dscr->dscr_dest0;
dp->dscr_source0 = dscr->dscr_source0;
dp->dscr_dest1 = dscr->dscr_dest1;
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
-
+#include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
* uart to be used for debugging.
*/
#define DEBUG_BASE UART_DEBUG_BASE
-/**/
-
-/* we need uint32 uint8 */
-/* #include "types.h" */
-typedef unsigned char uint8;
-typedef unsigned int uint32;
#define UART16550_BAUD_2400 2400
#define UART16550_BAUD_4800 4800
#define UART_MOD_CNTRL 0x100 /* Module Control */
/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
+#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
+#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
extern unsigned long calc_clock(void);
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
{
-
- if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
+ if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
UART16550_WRITE(UART_MOD_CNTRL, 3);
- }
calc_clock();
/* disable interrupts */
/* set up baud rate */
{
- uint32 divisor;
+ u32 divisor;
/* set divisor */
divisor = get_au1x00_uart_baud_base() / baud;
UART16550_WRITE(UART_LCR, (data | parity | stop));
}
-static int remoteDebugInitialized = 0;
+static int remoteDebugInitialized;
-uint8 getDebugChar(void)
+u8 getDebugChar(void)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
UART16550_STOP_1BIT);
}
- while((UART16550_READ(UART_LSR) & 0x1) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x1) == 0);
return UART16550_READ(UART_RX);
}
-int putDebugChar(uint8 byte)
+int putDebugChar(u8 byte)
{
-// int i;
-
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_115200,
UART16550_STOP_1BIT);
}
- while ((UART16550_READ(UART_LSR)&0x40) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x40) == 0);
UART16550_WRITE(UART_TX, byte);
- //for (i=0;i<0xfff;i++);
return 1;
}
/*
*
* BRIEF MODULE DESCRIPTION
- * A DMA channel allocator for Au1000. API is modeled loosely off of
+ * A DMA channel allocator for Au1x00. API is modeled loosely off of
* linux/kernel/dma.c.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
/*
* A note on resource allocation:
*
* returned from request_dma.
*/
-
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
};
EXPORT_SYMBOL(au1000_dma_table);
-// Device FIFO addresses and default DMA modes
+/* Device FIFO addresses and default DMA modes */
static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
{UART0_ADDR + UART_RX, 0},
{0, 0},
{0, 0},
- {AC97C_DATA, DMA_DW16 }, // coherent
- {AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent
+ {AC97C_DATA, DMA_DW16 }, /* coherent */
+ {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
struct dma_chan *chan;
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
- if ((chan = get_dma_chan(i)) != NULL) {
+ chan = get_dma_chan(i);
+ if (chan != NULL)
len += sprintf(buf + len, "%2d: %s\n",
i, chan->dev_str);
- }
}
if (fpos >= len) {
return 0;
}
*start = buf + fpos;
- if ((len -= fpos) > length)
+ len -= fpos;
+ if (len > length)
return length;
*eof = 1;
return len;
}
-// Device FIFO addresses and default DMA modes - 2nd bank
+/* Device FIFO addresses and default DMA modes - 2nd bank */
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
- {SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent
- {SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent
+ { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */
+ { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */
};
void dump_au1000_dma_channel(unsigned int dmanr)
au_readl(chan->io + DMA_BUFFER1_COUNT));
}
-
/*
* Finds a free channel, and binds the requested device to it.
* Returns the allocated channel number, or negative on error.
if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
return -EINVAL;
#else
- if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+ if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
return -EINVAL;
#endif
- for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
if (au1000_dma_table[i].dev_id < 0)
break;
- }
+
if (i == NUM_AU1000_DMA_CHANNELS)
return -ENODEV;
if (dev_id >= DMA_NUM_DEV) {
dev_id -= DMA_NUM_DEV;
dev = &dma_dev_table_bank2[dev_id];
- } else {
+ } else
dev = &dma_dev_table[dev_id];
- }
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
- if ((ret = request_irq(chan->irq, irqhandler, irqflags,
- dev_str, chan->irq_dev))) {
+ ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
+ chan->irq_dev);
+ if (ret) {
chan->irq = 0;
chan->irq_dev = NULL;
return ret;
chan->irq_dev = NULL;
}
- // fill it in
+ /* fill it in */
chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
void free_au1000_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan) {
- printk("Trying to free DMA%d\n", dmanr);
+ printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
return;
}
}
EXPORT_SYMBOL(free_au1000_dma);
-#endif // AU1000 AU1500 AU1100
+#endif /* AU1000 AU1500 AU1100 */
static int au1xxx_gpio1_read(unsigned gpio)
{
- return ((gpio1->pinstaterd >> gpio) & 0x01);
+ return (gpio1->pinstaterd >> gpio) & 0x01;
}
static void au1xxx_gpio1_write(unsigned gpio, int value)
else
return au1xxx_gpio1_read(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_get_value);
void au1xxx_gpio_set_value(unsigned gpio, int value)
else
au1xxx_gpio1_write(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_set_value);
int au1xxx_gpio_direction_input(unsigned gpio)
return au1xxx_gpio1_direction_input(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_input);
int au1xxx_gpio_direction_output(unsigned gpio, int value)
return au1xxx_gpio1_direction_output(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_output);
au_sync();
}
-
static inline void mask_and_ack_level_irq(unsigned int irq_nr)
{
-
local_disable_irq(irq_nr);
au_sync();
#if defined(CONFIG_MIPS_PB1000)
unsigned long flags, new_mask;
spin_lock_irqsave(&irq_lock, flags);
- for (i = 0; i < 32; i++) {
+ for (i = 0; i < 32; i++)
if (mask & (1 << i)) {
if (controller)
local_enable_irq(i + 32);
else
local_enable_irq(i);
}
- }
+
if (controller)
new_mask = au_readl(IC1_MASKSET);
else
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
u32 prid = read_c0_prid();
if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
- au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
- Au1500_PCI_CFG);
- printk("Non-coherent PCI accesses enabled\n");
+ au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
+ Au1500_PCI_CFG);
+ printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
}
}
#endif
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
{
- .start = SMBUS_PSC_BASE,
- .end = SMBUS_PSC_BASE + 0x24 - 1,
+ .start = CPHYSADDR(SMBUS_PSC_BASE),
+ .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
.flags = IORESOURCE_MEM,
},
};
#endif
};
-int __init au1xxx_platform_init(void)
+static int __init au1xxx_platform_init(void)
{
unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
int i;
/* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags ; i++)
+ for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
- return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
+ return platform_add_devices(au1xxx_platform_devices,
+ ARRAY_SIZE(au1xxx_platform_devices));
}
arch_initcall(au1xxx_platform_init);
/*
* BRIEF MODULE DESCRIPTION
- * Au1000 Power Management routines.
+ * Au1xx0 Power Management routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Some of the routines are right out of init/main.c, whose
* copyrights apply here.
#ifdef CONFIG_PM
#define DEBUG 1
-#ifdef DEBUG
-# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#ifdef DEBUG
+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
#else
-# define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...)
#endif
static void au1000_calibrate_delay(void);
static DEFINE_SPINLOCK(pm_lock);
-/* We need to save/restore a bunch of core registers that are
+/*
+ * We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
* If reading a register doesn't provide a proper result for a
* later restore, we have to provide a function for loading that
static unsigned int sleep_usbdev_enable;
static unsigned int sleep_static_memctlr[4][3];
-/* Define this to cause the value you write to /proc/sys/pm/sleep to
+/*
+ * Define this to cause the value you write to /proc/sys/pm/sleep to
* set the TOY timer for the amount of time you want to sleep.
* This is done mainly for testing, but may be useful in other cases.
* The value is number of 32KHz ticks to sleep.
*/
#define SLEEP_TEST_TIMEOUT 1
-#ifdef SLEEP_TEST_TIMEOUT
-static int sleep_ticks;
+#ifdef SLEEP_TEST_TIMEOUT
+static int sleep_ticks;
void wakeup_counter0_set(int ticks);
#endif
-static void
-save_core_regs(void)
+static void save_core_regs(void)
{
extern void save_au1xxx_intctl(void);
extern void pm_eth0_shutdown(void);
- /* Do the serial ports.....these really should be a pm_*
+ /*
+ * Do the serial ports.....these really should be a pm_*
* registered function by the driver......but of course the
* standard serial driver doesn't understand our Au1xxx
* unique registers.
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
- /* Shutdown USB host/device.
- */
+ /* Shutdown USB host/device. */
sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
- /* There appears to be some undocumented reset register....
- */
+ /* There appears to be some undocumented reset register.... */
au_writel(0, 0xb0100004); au_sync();
au_writel(0, USB_HOST_CONFIG); au_sync();
sleep_usbdev_enable = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE); au_sync();
- /* Save interrupt controller state.
- */
+ /* Save interrupt controller state. */
save_au1xxx_intctl();
- /* Clocks and PLLs.
- */
+ /* Clocks and PLLs. */
sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
- /* We don't really need to do this one, but unless we
+ /*
+ * We don't really need to do this one, but unless we
* write it again it won't have a valid value if we
* happen to read it.
*/
sleep_pin_function = au_readl(SYS_PINFUNC);
- /* Save the static memory controller configuration.
- */
+ /* Save the static memory controller configuration. */
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
}
-static void
-restore_core_regs(void)
+static void restore_core_regs(void)
{
extern void restore_au1xxx_intctl(void);
extern void wakeup_counter0_adjust(void);
au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
- /* Restore the static memory controller configuration.
- */
+ /* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
- /* Enable the UART if it was enabled before sleep.
+ /*
+ * Enable the UART if it was enabled before sleep.
* I guess I should define module control bits........
*/
if (sleep_uart0_enable & 0x02) {
int au_sleep(void)
{
unsigned long wakeup, flags;
- extern void save_and_sleep(void);
+ extern void save_and_sleep(void);
spin_lock_irqsave(&pm_lock, flags);
flush_cache_all();
- /** The code below is all system dependent and we should probably
+ /**
+ ** The code below is all system dependent and we should probably
** have a function call out of here to set this up. You need
** to configure the GPIO or timer interrupts that will bring
** you out of sleep.
** For testing, the TOY counter wakeup is useful.
**/
-
#if 0
au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
- /* gpio 6 can cause a wake up event */
+ /* GPIO 6 can cause a wake up event */
wakeup = au_readl(SYS_WAKEMSK);
wakeup &= ~(1 << 8); /* turn off match20 wakeup */
- wakeup |= 1 << 6; /* turn on gpio 6 wakeup */
+ wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */
#else
- /* For testing, allow match20 to wake us up.
- */
+ /* For testing, allow match20 to wake us up. */
#ifdef SLEEP_TEST_TIMEOUT
wakeup_counter0_set(sleep_ticks);
#endif
save_and_sleep();
- /* after a wakeup, the cpu vectors back to 0x1fc00000 so
+ /*
+ * After a wakeup, the cpu vectors back to 0x1fc00000, so
* it's up to the boot code to get us back here.
*/
restore_core_regs();
return 0;
}
-static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
#ifdef SLEEP_TEST_TIMEOUT
#define TMPBUFLEN2 16
char buf[TMPBUFLEN2], *p;
#endif
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
#ifdef SLEEP_TEST_TIMEOUT
- if (*len > TMPBUFLEN2 - 1) {
+ if (*len > TMPBUFLEN2 - 1)
return -EFAULT;
- }
- if (copy_from_user(buf, buffer, *len)) {
+ if (copy_from_user(buf, buffer, *len))
return -EFAULT;
- }
buf[*len] = 0;
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
return 0;
}
-static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
int retval = 0, i;
unsigned long val, pll;
#define MAX_CPU_FREQ 396
char buf[TMPBUFLEN], *p;
unsigned long flags, intc0_mask, intc1_mask;
- unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
- old_refresh;
+ unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
+ unsigned long baud_rate;
spin_lock_irqsave(&pm_lock, flags);
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
/* Parse the new frequency */
if (*len > TMPBUFLEN - 1) {
spin_unlock_irqrestore(&pm_lock, flags);
pll = val / 12;
if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */
- /* revisit this for higher speed cpus */
+ /* Revisit this for higher speed CPUs */
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000;
- new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
set_au1x00_speed(new_cpu_freq);
set_au1x00_uart_baud_base(new_baud_base);
old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
- new_refresh =
- ((old_refresh * new_cpu_freq) /
- old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
+ new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
+ (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
au_writel(pll, SYS_CPUPLL);
au_sync_delay(1);
au_writel(new_refresh, MEM_SDREFCFG);
au_sync_delay(1);
- for (i = 0; i < 4; i++) {
- if (au_readl
- (UART_BASE + UART_MOD_CNTRL +
- i * 0x00100000) == 3) {
- old_clk =
- au_readl(UART_BASE + UART_CLK +
- i * 0x00100000);
- // baud_rate = baud_base/clk
+ for (i = 0; i < 4; i++)
+ if (au_readl(UART_BASE + UART_MOD_CNTRL +
+ i * 0x00100000) == 3) {
+ old_clk = au_readl(UART_BASE + UART_CLK +
+ i * 0x00100000);
baud_rate = old_baud_base / old_clk;
- /* we won't get an exact baud rate and the error
+ /*
+ * We won't get an exact baud rate and the error
* could be significant enough that our new
* calculation will result in a clock that will
* give us a baud rate that's too far off from
else if (baud_rate > 17000)
baud_rate = 19200;
else
- (baud_rate = 9600);
- // new_clk = new_baud_base/baud_rate
+ baud_rate = 9600;
new_clk = new_baud_base / baud_rate;
- au_writel(new_clk,
- UART_BASE + UART_CLK +
- i * 0x00100000);
+ au_writel(new_clk, UART_BASE + UART_CLK +
+ i * 0x00100000);
au_sync_delay(10);
}
- }
}
-
/*
* We don't want _any_ interrupts other than match20. Otherwise our
* au1000_calibrate_delay() calculation will be off, potentially a lot.
__initcall(pm_init);
-
/*
* This is right out of init/main.c
*/
-/* This is the number of bits of precision for the loops_per_jiffy. Each
- bit takes on average 1.5/HZ seconds. This (like the original) is a little
- better than 1% */
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.
+ * Each bit takes on average 1.5/HZ seconds. This (like the original)
+ * is a little better than 1%.
+ */
#define LPS_PREC 8
static void au1000_calibrate_delay(void)
unsigned long ticks, loopbit;
int lps_precision = LPS_PREC;
- loops_per_jiffy = (1 << 12);
+ loops_per_jiffy = 1 << 12;
while (loops_per_jiffy <<= 1) {
- /* wait for "start of" clock tick */
+ /* Wait for "start of" clock tick */
ticks = jiffies;
while (ticks == jiffies)
/* nothing */ ;
- /* Go .. */
+ /* Go ... */
ticks = jiffies;
__delay(loops_per_jiffy);
ticks = jiffies - ticks;
break;
}
-/* Do a binary approximation to get loops_per_jiffy set to equal one clock
- (up to lps_precision bits) */
+ /*
+ * Do a binary approximation to get loops_per_jiffy set to be equal
+ * one clock (up to lps_precision bits)
+ */
loops_per_jiffy >>= 1;
loopbit = loops_per_jiffy;
while (lps_precision-- && (loopbit >>= 1)) {
loops_per_jiffy &= ~loopbit;
}
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM */
* BRIEF MODULE DESCRIPTION
* PROM library initialisation code, supports YAMON and U-Boot.
*
- * Copyright 2000, 2001, 2006 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This file was derived from Carsten Langgaard's
* arch/mips/mips-boards/xx files.
actr = 1; /* Always ignore argv[0] */
cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
+ while (actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
if (yamon) {
if (strcmp(envname, *env++) == 0)
return *env;
- } else {
- if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
- return *env + i + 1;
- }
+ } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+ return *env + i + 1;
env++;
}
{
int i;
- for(i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++) {
unsigned char num;
- if((*str == '.') || (*str == ':'))
+ if ((*str == '.') || (*str == ':'))
str++;
- num = str2hexnum(*str++) << 4;
- num |= (str2hexnum(*str++));
+ num = str2hexnum(*str++) << 4;
+ num |= str2hexnum(*str++);
ea[i] = num;
}
}
/*
*
* BRIEF MODULE DESCRIPTION
- * Low level uart routines to directly access a 16550 uart.
+ * Low level UART routines to directly access Alchemy UART.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
#ifdef SLOW_DOWN
static inline void slow_down(void)
{
- int k;
- for (k=0; k<10000; k++);
+ int k;
+
+ for (k = 0; k < 10000; k++);
}
#else
#define slow_down()
void
prom_putchar(const unsigned char c)
{
- unsigned char ch;
- int i = 0;
+ unsigned char ch;
+ int i = 0;
+
+ do {
+ ch = com1[SER_CMD];
+ slow_down();
+ i++;
+ if (i > TIMEOUT)
+ break;
+ } while (0 == (ch & TX_BUSY));
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = c;
+ com1[SER_DATA] = c;
}
/*
*
* BRIEF MODULE DESCRIPTION
- * Au1000 reset routines.
+ * Au1xx0 reset routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/cacheflush.h>
+
#include <asm/mach-au1x00/au1000.h>
extern int au_sleep(void);
-extern void (*flush_cache_all)(void);
void au1000_restart(char *command)
{
u32 prid = read_c0_prid();
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
- switch (prid & 0xFF000000)
- {
+
+ switch (prid & 0xFF000000) {
case 0x00000000: /* Au1000 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
-
- default:
- break;
}
set_c0_status(ST0_BEV | ST0_ERL);
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
- /* power off system */
- printk("\n** Powering off...\n");
- au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
+ /* Power off system */
+ printk(KERN_NOTICE "\n** Powering off...\n");
+ au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
au_sync();
- while(1); /* should not get here */
+ while (1); /* should not get here */
#else
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
#endif
#ifdef CONFIG_MIPS_DB1200
- au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+ au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
#endif
#ifdef CONFIG_PM
au_sleep();
- /* should not get here */
- printk(KERN_ERR "Unable to put cpu in sleep mode\n");
- while(1);
+ /* Should not get here */
+ printk(KERN_ERR "Unable to put CPU in sleep mode\n");
+ while (1);
#else
while (1)
__asm__(".set\tmips3\n\t"
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
*
* Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
*
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpufreq, bclk = 1;
+ unsigned long prid, cpufreq, bclk;
set_cpuspec();
sp = cur_cpu_spec[0];
cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
- bclk = sp->cpu_bclk;
- if (bclk)
- {
+ if (sp->cpu_bclk) {
/* Enable BCLK switching */
- bclk = au_readl(0xB190003C);
- au_writel(bclk | 0x60, 0xB190003C);
- printk("BCLK switching enabled!\n");
+ bclk = au_readl(SYS_POWERCTRL);
+ au_writel(bclk | 0x60, SYS_POWERCTRL);
+ printk(KERN_INFO "BCLK switching enabled!\n");
}
- if (sp->cpu_od) {
- /* Various early Au1000 Errata corrected by this */
- set_c0_config(1<<19); /* Set Config[OD] */
- }
- else {
+ if (sp->cpu_od)
+ /* Various early Au1xx0 errata corrected by this */
+ set_c0_config(1 << 19); /* Set Config[OD] */
+ else
/* Clear to obtain best system bus performance */
- clear_c0_config(1<<19); /* Clear Config[OD] */
- }
+ clear_c0_config(1 << 19); /* Clear Config[OD] */
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
- if ((argptr = strstr(argptr, "console=")) == NULL) {
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
#endif
-
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
- /* Don't fixup 36 bit addresses */
+ /* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
return phys_addr;
}
#endif
- /* All Au1x SOCs have a pcmcia controller */
- /* We setup our 32 bit pseudo addresses to be equal to the
- * 36 bit addr >> 4, to make it easier to check the address
+ /*
+ * All Au1xx0 SOCs have a PCMCIA controller.
+ * We setup our 32-bit pseudo addresses to be equal to the
+ * 36-bit addr >> 4, to make it easier to check the address
* and fix it.
- * The Au1x socket 0 phys attribute address is 0xF 4000 0000.
+ * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
* The pseudo address we use is 0xF400 0000. Any address over
- * 0xF400 0000 is a pcmcia pseudo address.
+ * 0xF400 0000 is a PCMCIA pseudo address.
*/
- if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) {
+ if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
return (phys_t)(phys_addr << 4);
- }
/* default nop */
return phys_addr;
*
* Setting up the clock on the MIPS boards.
*
- * Update. Always configure the kernel with CONFIG_NEW_TIME_C. This
- * will use the user interface gettimeofday() functions from the
- * arch/mips/kernel/time.c, and we provide the clock interrupt processing
- * and the timer offset compute functions. If CONFIG_PM is selected,
- * we also ensure the 32KHz timer is available. -- Dan
+ * We provide the clock interrupt processing and the timer offset compute
+ * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is
+ * available. -- Dan
*/
#include <linux/types.h>
#if HZ < 100 || HZ > 1000
#error "unsupported HZ value! Must be in [100,1000]"
#endif
-#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
-extern void startup_match20_interrupt(irq_handler_t handler);
+#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
static unsigned long last_pc0, last_match20;
#endif
{
unsigned long pc0;
int time_elapsed;
- static int jiffie_drift = 0;
+ static int jiffie_drift;
if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
/* should never happen! */
}
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
do_timer(1);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
- /* our counter ticks at 10.009765625 ms/tick, we we're running
- * almost 10uS too slow per tick.
+ /*
+ * Our counter ticks at 10.009765625 ms/tick, we we're running
+ * almost 10 uS too slow per tick.
*/
if (jiffie_drift >= 999) {
/* When we wakeup from sleep, we have to "catch up" on all of the
* timer ticks we have missed.
*/
-void
-wakeup_counter0_adjust(void)
+void wakeup_counter0_adjust(void)
{
unsigned long pc0;
int time_elapsed;
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
time_elapsed -= MATCH20_INC;
}
-/* This is just for debugging to set the timer for a sleep delay.
-*/
-void
-wakeup_counter0_set(int ticks)
+/* This is just for debugging to set the timer for a sleep delay. */
+void wakeup_counter0_set(int ticks)
{
unsigned long pc0;
}
#endif
-/* I haven't found anyone that doesn't use a 12 MHz source clock,
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
#define AU1000_SRC_CLK 12000000
/*
* We read the real processor speed from the PLL. This is important
- * because it is more accurate than computing it from the 32KHz
+ * because it is more accurate than computing it from the 32 KHz
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
* properly. This function is futher convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
- * write-only PLL register, that we need the 32KHz when power management
- * "wait" is enabled, and we need to detect if the 32KHz isn't present
+ * write-only PLL register, that we need the 32 KHz when power management
+ * "wait" is enabled, and we need to detect if the 32 KHz isn't present
* but requested......got it? :-) -- Dan
*/
unsigned long calc_clock(void)
spin_lock_irqsave(&time_lock, flags);
- /* Power management cares if we don't have a 32KHz counter.
- */
+ /* Power management cares if we don't have a 32 KHz counter. */
no_au1xxx_32khz = 0;
counter = au_readl(SYS_COUNTER_CNTRL);
if (counter & SYS_CNTRL_E0) {
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
/* RTC now ticks at 32.768/16 kHz */
- au_writel(trim_divide-1, SYS_RTCTRIM);
+ au_writel(trim_divide - 1, SYS_RTCTRIM);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
#endif
else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+ /* On Alchemy CPU:counter ratio is 1:1 */
mips_hpt_frequency = cpu_speed;
- // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
- set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+ set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
spin_unlock_irqrestore(&time_lock, flags);
return cpu_speed;
}
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
- set_au1x00_speed(est_freq);
- set_au1x00_lcd_clock(); // program the LCD clock
+ printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
+ est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
+ set_au1x00_speed(est_freq);
+ set_au1x00_lcd_clock(); /* program the LCD clock */
#ifdef CONFIG_PM
/*
* counter 0 interrupt as a special irq and it doesn't show
* up under /proc/interrupts.
*
- * Check to ensure we really have a 32KHz oscillator before
+ * Check to ensure we really have a 32 KHz oscillator before
* we do this.
*/
if (no_au1xxx_32khz)
- printk("WARNING: no 32KHz clock found.\n");
+ printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
else {
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
- au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK);
+ au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
au_writel(~0, SYS_WAKESRC);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- /* setup match20 to interrupt once every HZ */
+ /* Setup match20 to interrupt once every HZ */
last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
- /* We can use the real 'wait' instruction.
- */
+ /* We can use the real 'wait' instruction. */
allow_au1k_wait = 1;
}
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
-# Makefile for the Alchemy Semiconductor Db1x00 board.
lib-y := init.o board_setup.o irqmap.o
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+ /* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
}
void __init board_setup(void)
{
- u32 pin_func;
+ u32 pin_func = 0;
- pin_func = 0;
- /* not valid for 1550 */
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
+ /* Not valid for Au1550 */
+#if defined(CONFIG_IRDA) && \
+ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+ /* Set IRFIRSEL instead of GPIO15 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
- /* power off until the driver is in use */
+ /* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
+ bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
#ifdef CONFIG_MIPS_MIRAGE
- /* enable GPIO[31:0] inputs */
+ /* Enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
- /* GPIO[20] is output, tristate the other input primary GPIO's */
- au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
+ /* GPIO[20] is output, tristate the other input primary GPIOs */
+ au_writel(~(1 << 20), SYS_TRIOUTCLR);
- /* set GPIO[210:208] instead of SSI_0 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
+ /* Set GPIO[210:208] instead of SSI_0 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
- /* set GPIO[215:211] for LED's */
- pin_func |= (u32)((5<<2));
+ /* Set GPIO[215:211] for LEDs */
+ pin_func |= 5 << 2;
- /* set GPIO[214:213] for more LED's */
- pin_func |= (u32)((5<<12));
+ /* Set GPIO[214:213] for more LEDs */
+ pin_func |= 5 << 12;
- /* set GPIO[207:200] instead of PCMCIA/LCD */
- pin_func |= (u32)((3<<17));
+ /* Set GPIO[207:200] instead of PCMCIA/LCD */
+ pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
- /* Enable speaker amplifier. This should
+ /*
+ * Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
au_sync();
#ifdef CONFIG_MIPS_DB1000
- printk("AMD Alchemy Au1000/Db1000 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
- printk("AMD Alchemy Au1500/Db1500 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
- printk("AMD Alchemy Au1100/Db1100 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
- printk("AMD Alchemy Bosporus Board\n");
+ printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
- printk("AMD Alchemy Mirage Board\n");
+ printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
- printk("AMD Alchemy Au1550/Db1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
+ [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
# Bruno Randolf <bruno.randolf@4g-systems.biz>
#
# Makefile for 4G Systems MTX-1 board.
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup.
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
#include <asm/mach-au1x00/au1000.h>
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
void board_reset(void)
{
void __init board_setup(void)
{
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- // enable USB power switch
- au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
- au_writel( 0x100000, GPIO2_OUTPUT );
+ /* Enable USB power switch */
+ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+ au_writel(0x100000, GPIO2_OUTPUT);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
#endif
- // initialize sys_pinfunc:
- au_writel( SYS_PF_NI2, SYS_PINFUNC );
+ /* Initialize sys_pinfunc */
+ au_writel(SYS_PF_NI2, SYS_PINFUNC);
- // initialize GPIO
- au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
- au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
- au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
+ /* Initialize GPIO */
+ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+ au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
- // enable LED and set it to green
- au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
- au_writel( 0x18000800, GPIO2_OUTPUT );
+ /* Enable LED and set it to green */
+ au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+ au_writel(0x18000800, GPIO2_OUTPUT);
board_pci_idsel = mtx1_pci_idsel;
- printk("4G Systems MTX-1 Board\n");
+ printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
int
{
#define MTX_IDSEL_ONLY_0_AND_3 0
#if MTX_IDSEL_ONLY_0_AND_3
- if (devsel != 0 && devsel != 3) {
- printk("*** not 0 or 3\n");
- return 0;
- }
+ if (devsel != 0 && devsel != 3) {
+ printk(KERN_ERR "*** not 0 or 3\n");
+ return 0;
+ }
#endif
- if (assert && devsel != 0) {
- // suppress signal to cardbus
- au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
- }
- else {
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- }
- au_sync_udelay(1);
- return 1;
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+ else
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_sync_udelay(1);
+ return 1;
}
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+ [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/gpio.h>
-
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Semiconductor Pb1000 board.
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
lib-y := init.o board_setup.o irqmap.o
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD clocks */
+ /* Zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- switch (prid & 0x000000FF)
- {
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
- /* CPU core freq to 48MHz to slow it way down... */
- au_writel(4, SYS_CPUPLL);
+ /* CPU core freq to 48 MHz to slow it way down... */
+ au_writel(4, SYS_CPUPLL);
- /*
- * Setup 48MHz FREQ2 from CPUPLL for USB Host
- */
- /* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
- sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ /*
+ * Setup 48 MHz FREQ2 from CPUPLL for USB Host
+ * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
+ */
+ sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* CPU core freq to 384MHz */
- au_writel(0x20, SYS_CPUPLL);
+ /* CPU core freq to 384 MHz */
+ au_writel(0x20, SYS_CPUPLL);
- printk("Au1000: 48MHz OHCI workaround enabled\n");
+ printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
break;
- default: /* HC and newer */
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ default: /* HC and newer */
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
break;
}
/*
- * Route 48MHz FREQ2 into USB Host and/or Device
+ * Route 48 MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
- // make gpio 15 an input (for interrupt line)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
- // we don't need I2S, so make it available for GPIO[31:29]
- pin_func |= (1<<5);
+ /* Make GPIO 15 an input (for interrupt line) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
+ /* We don't need I2S, so make it available for GPIO[31:29] */
+ pin_func |= SYS_PF_I2S;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x8000, SYS_TRIOUTCLR);
- static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00);
+ static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
au_writel(static_cfg0, MEM_STCFG0);
- // configure RCE2* for LCD
+ /* configure RCE2* for LCD */
au_writel(0x00000004, MEM_STCFG2);
- // MEM_STTIME2
+ /* MEM_STTIME2 */
au_writel(0x09000000, MEM_STTIME2);
- // Set 32-bit base address decoding for RCE2*
+ /* Set 32-bit base address decoding for RCE2* */
au_writel(0x10003ff0, MEM_STADDR2);
- // PCI CPLD setup
- // expand CE0 to cover PCI
+ /*
+ * PCI CPLD setup
+ * Expand CE0 to cover PCI
+ */
au_writel(0x11803e40, MEM_STADDR1);
- // burst visibility on
+ /* Burst visibility on */
au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
- au_writel(0x83, MEM_STCFG1); // ewait enabled, flash timing
- au_writel(0x33030a10, MEM_STTIME1); // slower timing for FPGA
+ au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */
+ au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-#ifdef CONFIG_PCI
- au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
- au_writel(0, SDRAM_MBAR); // set mbar to 0
- au_writel(0x2, SDRAM_CMD); // enable memory accesses
- au_sync_delay(1);
-#endif
-
- /* Enable Au1000 BCLK switching - note: sed1356 must not use
- * its BCLK (Au1000 LCLK) for any timings */
- switch (prid & 0x000000FF)
- {
+ /*
+ * Enable Au1000 BCLK switching - note: sed1356 must not use
+ * its BCLK (Au1000 LCLK) for any timings
+ */
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
break;
default: /* HC and newer */
- /* Enable sys bus clock divider when IDLE state or no bus
- activity. */
+ /*
+ * Enable sys bus clock divider when IDLE state or no bus
+ * activity.
+ */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
break;
}
/*
* BRIEF MODULE DESCRIPTION
- * PB1000 board setup
+ * Pb1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1100 board.
+#
lib-y := init.o board_setup.o irqmap.o
/*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1100_RST_VDDI);
}
void __init board_setup(void)
{
- volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
+ volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PININPUTEN);
udelay(100);
{
u32 pin_func, sys_freqctrl, sys_clksrc;
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD/IrDA clock */
+ /* Zero and disable USBH/USBD/IrDA clock */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
- * Route 48MHz FREQ2 into USBH/USBD/IrDA
+ * Route 48 MHz FREQ2 into USBH/USBD/IrDA
*/
- sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
- // get USB Functionality pin state (device vs host drive pins)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /*
+ * Get USB Functionality pin state (device vs host drive pins).
+ */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host. */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
}
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
- // Enable the RTC if not already enabled
+ /* Enable the RTC if not already enabled. */
if (!(readb(base + 0x28) & 0x20)) {
writeb(readb(base + 0x28) | 0x20, base + 0x28);
au_sync();
}
- // Put the clock in BCD mode
+ /* Put the clock in BCD mode. */
if (readb(base + 0x2C) & 0x4) { /* reg B */
writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
au_sync();
* BRIEF MODULE DESCRIPTION
* Pb1100 board setup
*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg3;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg3;
prom_init_cmdline();
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
- { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
- { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
- { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
+ { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
+ { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
+ { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
+ { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
#
-# Makefile for the Alchemy Semiconductor PB1200 board.
+# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
lib-y := init.o board_setup.o irqmap.o
#include <linux/init.h>
#include <linux/sched.h>
-#include <au1000.h>
#include <prom.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#endif
+#include <au1xxx.h>
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
#if 0
{
- u32 pin_func;
-
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
- * but it is board specific code, so put it here.
- */
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
- au_writel(pin_func, SYS_PINFUNC);
-
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
- au_sync();
+ u32 pin_func;
+
+ /*
+ * Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+ au_sync();
}
#endif
#if defined(CONFIG_I2C_AU1550)
{
- u32 freq0, clksrc;
- u32 pin_func;
-
- /* Select SMBUS in CPLD */
- bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
-
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func &= ~(3<<17 | 1<<4);
- /* Set GPIOs correctly */
- pin_func |= 2<<17;
- au_writel(pin_func, SYS_PINFUNC);
- au_sync();
-
- /* The i2c driver depends on 50Mhz clock */
- freq0 = au_readl(SYS_FREQCTRL0);
- au_sync();
- freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
- freq0 |= (3<<SYS_FC_FRDIV1_BIT);
- /* 396Mhz / (3+1)*2 == 49.5Mhz */
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
- freq0 |= SYS_FC_FE1;
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
-
- clksrc = au_readl(SYS_CLKSRC);
- au_sync();
- clksrc &= ~0x01f00000;
- /* bit 22 is EXTCLK0 for PSC0 */
- clksrc |= (0x3 << 22);
- au_writel(clksrc, SYS_CLKSRC);
- au_sync();
+ u32 freq0, clksrc;
+ u32 pin_func;
+
+ /* Select SMBus in CPLD */
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+ /* Set GPIOs correctly */
+ pin_func |= 2 << 17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
+
+ /* The I2C driver depends on 50 MHz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+ /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+ /* Bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
}
#endif
#endif
#endif
- /* The Pb1200 development board uses external MUX for PSC0 to
- support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
- */
+ /*
+ * The Pb1200 development board uses external MUX for PSC0 to
+ * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
#ifdef CONFIG_I2C_AU1550
- bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
#endif
au_sync();
#ifdef CONFIG_MIPS_PB1200
- printk("AMD Alchemy Pb1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
- printk("AMD Alchemy Db1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
/* Setup Pb1200 External Interrupt Controller */
board_init_irq = _board_init_irq;
}
-int
-board_au1200fb_panel(void)
+int board_au1200fb_panel(void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
return p;
}
-int
-board_au1200fb_panel_init(void)
+int board_au1200fb_panel_init(void)
{
/* Apply power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_init()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+ /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
-int
-board_au1200fb_panel_shutdown(void)
+int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_shutdown()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL);
+ /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}
-
* BRIEF MODULE DESCRIPTION
* PB1200 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+ /* This is external interrupt cascade */
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
- * Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
*/
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
- /* Clear all the edge interrupts. This has no effect on level */
+ /* Clear all the edge interrupts. This has no effect on level. */
bcsr->int_status = bisr;
- for( ; bisr; bisr &= (bisr-1) )
- {
+ for ( ; bisr; bisr &= bisr - 1) {
extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
inline void pb1200_enable_irq(unsigned int irq_nr)
{
- bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
}
inline void pb1200_disable_irq(unsigned int irq_nr)
{
- bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
}
static unsigned int pb1200_setup_cascade(void)
{
- int err;
-
- err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", &pb1200_cascade_handler);
- if (err)
- return err;
-
- return 0;
+ return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
}
static unsigned int pb1200_startup_irq(unsigned int irq)
unsigned int irq;
#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
+ /* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+ printk(KERN_ERR "updated to latest revision. This software will\n");
+ printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
/*
* GPIO_7 can not be hooked here, so it is hooked upon first
- * request of any source attached to the cascade
+ * request of any source attached to the cascade.
*/
}
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1500 board.
+#
lib-y := init.o board_setup.o irqmap.o
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1500_RST_VDDI);
}
void __init board_setup(void)
u32 sys_freqctrl, sys_clksrc;
sys_clksrc = sys_freqctrl = pin_func = 0;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
- au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
+ au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux/2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
-
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-
#ifdef CONFIG_PCI
- // Setup PCI bus controller
+ /* Setup PCI bus controller */
au_writel(0, Au1500_PCI_CMEM);
au_writel(0x00003fff, Au1500_CFG_BASE);
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
/* Enable the RTC if not already enabled */
if (!(au_readl(0xac000028) & 0x20)) {
- printk("enabling clock ...\n");
+ printk(KERN_INFO "enabling clock ...\n");
au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
}
/* Put the clock in BCD mode */
- if (au_readl(0xac00002C) & 0x4) { /* reg B */
+ if (au_readl(0xac00002c) & 0x4) { /* reg B */
au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
au_sync();
}
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1500 board setup
+ * Pb1500 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1550 board.
#
lib-y := init.o board_setup.o irqmap.o
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1550 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
+ /* Hit BCSR.SYSTEM[RESET] */
+ au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
void __init board_setup(void)
{
u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ /*
+ * Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
au_sync();
- printk("AMD Alchemy Pb1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1550 board setup
+ * Pb1550 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for MyCable XXS1500 board.
#
/*
- * Copyright 2000-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
{
u32 pin_func;
- // set multiple use pins (UART3/GPIO) to UART (it's used as UART too)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3);
+ /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
au_writel(pin_func, SYS_PINFUNC);
- // enable UART
- au_writel(0x01, UART3_ADDR+UART_MOD_CNTRL); // clock enable (CE)
+ /* Enable UART */
+ au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
mdelay(10);
- au_writel(0x03, UART3_ADDR+UART_MOD_CNTRL); // CE and "enable"
+ au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
mdelay(10);
- // enable DTR = USB power up
- au_writel(0x01, UART3_ADDR+UART_MCR); //? UART_MCR_DTR is 0x01???
+ /* Enable DTR = USB power up */
+ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
#ifdef CONFIG_PCMCIA_XXS1500
- /* setup pcmcia signals */
+ /* Setup PCMCIA signals */
au_writel(0, SYS_PININPUTEN);
- /* gpio 0, 1, and 4 are inputs */
- au_writel(1 | (1<<1) | (1<<4), SYS_TRIOUTCLR);
+ /* GPIO 0, 1, and 4 are inputs */
+ au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR);
- /* enable GPIO2 if not already enabled */
+ /* Enable GPIO2 if not already enabled */
au_writel(1, GPIO2_ENABLE);
- /* gpio2 208/9/10/11 are inputs */
- au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR);
+ /* GPIO2 208/9/10/11 are inputs */
+ au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR);
- /* turn off power */
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT);
+ /* Turn off power */
+ au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30),
+ GPIO2_OUTPUT);
#endif
-
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
* BRIEF MODULE DESCRIPTION
* XXS1500 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
while (1) ;
}
-static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 };
+static unsigned long __initdata emma2rh_clock[4] = {
+ 166500000, 187312500, 199800000, 210600000
+};
static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
{
/* detect from boot strap */
reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
reg = (reg >> 4) & 0x3;
- return clock[reg];
+
+ return emma2rh_clock[reg];
}
void __init plat_time_init(void)
obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
obj-$(CONFIG_CPU_MIPSR2) += spram.o
-obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
".endr\n\t"
".set pop"
:
- : GCC_IMM_ASM(align), GCC_IMM_ASM(mod));
+ : GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
}
static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
* process and the system, here we map the page and fill the
* structure
*/
-static void irix_map_prda_page(void)
+static int irix_map_prda_page(void)
{
unsigned long v;
struct prda *pp;
v = do_brk(PRDA_ADDRESS, PAGE_SIZE);
up_write(¤t->mm->mmap_sem);
- if (v < 0)
- return;
+ if (v != PRDA_ADDRESS)
+ return v; /* v must be an error code */
pp = (struct prda *) v;
pp->prda_sys.t_pid = task_pid_vnr(current);
pp->prda_sys.t_rpid = task_pid_vnr(current);
/* We leave the rest set to zero */
+
+ return 0;
}
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
- irix_map_prda_page();
+ if (irix_map_prda_page())
+ goto out_free_dentry;
padzero(elf_bss);
vcwd = vpe_getcwd(tclimit);
- /* change to the cwd of the process that loaded the SP program */
+ /* change to cwd of the process that loaded the SP program */
old_fs = get_fs();
set_fs(KERNEL_DS);
sys_chdir(vcwd);
set >>= 1;
}
}
+
+ /* Put daemon cwd back to root to avoid umount problems */
+ sys_chdir("/");
}
static int channel_open = 0;
static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
{
int i;
+ unsigned int flags, vpeflags;
+
+ /* Ought not to be strictly necessary for SMTC builds */
+ local_irq_save(flags);
+ vpeflags = dvpe();
+ set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
+ irq_enable_hazard();
+ evpe(vpeflags);
+ local_irq_restore(flags);
for (i = 0; i < RTLX_CHANNELS; i++) {
wake_up(&channel_wqs[i].lx_queue);
static int rtlx_init(struct rtlx_info *rtlxi)
{
if (rtlxi->id != RTLX_ID) {
- printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
+ printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n",
+ rtlxi, rtlxi->id);
return -ENOEXEC;
}
if (rtlx == NULL) {
if( (p = vpe_get_shared(tclimit)) == NULL) {
- if (can_sleep) {
- __wait_event_interruptible(channel_wqs[index].lx_queue,
- (p = vpe_get_shared(tclimit)),
- ret);
- if (ret)
- goto out_fail;
- } else {
- printk(KERN_DEBUG "No SP program loaded, and device "
- "opened with O_NONBLOCK\n");
- ret = -ENOSYS;
+ if (can_sleep) {
+ __wait_event_interruptible(channel_wqs[index].lx_queue,
+ (p = vpe_get_shared(tclimit)), ret);
+ if (ret)
goto out_fail;
- }
+ } else {
+ printk(KERN_DEBUG "No SP program loaded, and device "
+ "opened with O_NONBLOCK\n");
+ ret = -ENOSYS;
+ goto out_fail;
+ }
}
smp_rmb();
DEFINE_WAIT(wait);
for (;;) {
- prepare_to_wait(&channel_wqs[index].lx_queue, &wait, TASK_INTERRUPTIBLE);
+ prepare_to_wait(
+ &channel_wqs[index].lx_queue,
+ &wait, TASK_INTERRUPTIBLE);
smp_rmb();
if (*p != NULL)
break;
}
finish_wait(&channel_wqs[index].lx_queue, &wait);
} else {
- printk(" *vpe_get_shared is NULL. "
+ pr_err(" *vpe_get_shared is NULL. "
"Has an SP program been loaded?\n");
ret = -ENOSYS;
goto out_fail;
}
if ((unsigned int)*p < KSEG0) {
- printk(KERN_WARNING "vpe_get_shared returned an invalid pointer "
- "maybe an error code %d\n", (int)*p);
+ printk(KERN_WARNING "vpe_get_shared returned an "
+ "invalid pointer maybe an error code %d\n",
+ (int)*p);
ret = -ENOSYS;
goto out_fail;
}
int rtlx_release(int index)
{
+ if (rtlx == NULL) {
+ pr_err("rtlx_release() with null rtlx\n");
+ return 0;
+ }
rtlx->channel[index].lx_state = RTLX_STATE_UNUSED;
return 0;
}
int ret = 0;
__wait_event_interruptible(channel_wqs[index].lx_queue,
- chan->lx_read != chan->lx_write || sp_stopping,
- ret);
+ (chan->lx_read != chan->lx_write) ||
+ sp_stopping, ret);
if (ret)
return ret;
unsigned int rtlx_write_poll(int index)
{
struct rtlx_channel *chan = &rtlx->channel[index];
- return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
+
+ return write_spacefree(chan->rt_read, chan->rt_write,
+ chan->buffer_size);
}
ssize_t rtlx_read(int index, void __user *buff, size_t count)
rt_read = rt->rt_read;
/* total number of bytes to copy */
- count = min(count,
- (size_t)write_spacefree(rt_read, rt->rt_write, rt->buffer_size));
+ count = min(count, (size_t)write_spacefree(rt_read, rt->rt_write,
+ rt->buffer_size));
/* first bit from write pointer to the end of the buffer, or count */
fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
if (cpu_has_vint)
set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+ else {
+ pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+ err = -ENODEV;
+ goto out_chrdev;
+ }
rtlx_irq.dev_id = rtlx;
setup_irq(rtlx_irq_num, &rtlx_irq);
/*
* Determine low and high memory ranges
*/
+ max_pfn = max_low_pfn;
if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
highstart_pfn = PFN_DOWN(HIGHMEM_START);
__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
{
- if (ops)
- printk(KERN_WARNING "Overriding previous set SMP ops\n");
+ if (mp_ops)
+ printk(KERN_WARNING "Overriding previously set SMP ops\n");
mp_ops = ops;
}
* This means you must tell Linux to use less memory than you
* physically have, for example by passing a mem= boot argument.
*/
- addr = pfn_to_kaddr(max_pfn);
+ addr = pfn_to_kaddr(max_low_pfn);
memset(addr, 0, len);
#else
/* simple grab some mem for now */
/* take system out of configuration state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ /*
+ * SMTC/SMVP kernels manage VPE enable independently,
+ * but uniprocessor kernels need to turn it on, even
+ * if that wasn't the pre-dvpe() state.
+ */
#ifdef CONFIG_SMP
- evpe(EVPE_ENABLE);
-#else
evpe(vpeflags);
+#else
+ evpe(EVPE_ENABLE);
#endif
emt(dmt_flag);
local_irq_restore(flags);
/* Sanity checks against insmoding binaries or wrong arch,
weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
|| (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
for (i = 0; i < hdr->e_phnum; i++) {
- if (phdr->p_type != PT_LOAD)
- continue;
-
- memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
- memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
- phdr++;
+ if (phdr->p_type == PT_LOAD) {
+ memcpy((void *)phdr->p_paddr,
+ (char *)hdr + phdr->p_offset,
+ phdr->p_filesz);
+ memset((void *)phdr->p_paddr + phdr->p_filesz,
+ 0, phdr->p_memsz - phdr->p_filesz);
+ }
+ phdr++;
}
for (i = 0; i < hdr->e_shnum; i++) {
return -ENODEV;
hdr = (Elf_Ehdr *) v->pbuffer;
- if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
if (vpe_elfload(v) >= 0) {
vpe_run(v);
} else {
EXPORT_SYMBOL(__kunmap);
EXPORT_SYMBOL(__kmap_atomic);
EXPORT_SYMBOL(__kunmap_atomic);
-EXPORT_SYMBOL(__kmap_atomic_to_page);
static void reset_counters(void *arg)
{
- int counters = (int)arg;
+ int counters = (int)(long)arg;
switch (counters) {
case 4:
w_c0_perfctrl3(0);
if (!cpu_has_mipsmt_pertccounters)
counters = counters_total_to_per_cpu(counters);
#endif
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
int counters = op_model_mipsxx_ops.num_counters;
counters = counters_per_cpu_to_total(counters);
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
perf_irq = save_perf_irq;
}
/*
* BRIEF MODULE DESCRIPTION
- * Board specific pci fixups.
+ * Board specific PCI fixups.
*
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/*
* BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 PCI support.
+ * Alchemy/AMD Au1xx0 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Support for all devices (greater than 16) added by David Gathright.
*
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <asm/mach-au1x00/au1000.h>
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...)
#endif
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
-
int (*board_pci_idsel)(unsigned int devsel, int assert);
void mod_wired_entry(int entry, unsigned long entrylo0,
}
static int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int dev_fn, unsigned char where,
- u32 * data)
+ unsigned int dev_fn, unsigned char where, u32 *data)
{
-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
unsigned int device = PCI_SLOT(dev_fn);
unsigned int function = PCI_FUNC(dev_fn);
unsigned long offset, status;
Au1500_PCI_STATCMD);
au_sync_udelay(1);
- /* Allow board vendors to implement their own off-chip idsel.
+ /*
+ * Allow board vendors to implement their own off-chip IDSEL.
* If it doesn't succeed, may as well bail out at this point.
*/
- if (board_pci_idsel) {
- if (board_pci_idsel(device, 1) == 0) {
- *data = 0xffffffff;
- local_irq_restore(flags);
- return -1;
- }
+ if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
+ *data = 0xffffffff;
+ local_irq_restore(flags);
+ return -1;
}
- /* setup the config window */
- if (bus->number == 0) {
- cfg_base = ((1<<device)<<11);
- } else {
- cfg_base = 0x80000000 | (bus->number<<16) | (device<<11);
- }
+ /* Setup the config window */
+ if (bus->number == 0)
+ cfg_base = (1 << device) << 11;
+ else
+ cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
- /* setup the lower bits of the 36 bit address */
- offset = (function << 8) | (where & ~0x3);
- /* pick up any address that falls below the page mask */
+ /* Setup the lower bits of the 36-bit address */
+ offset = (function << 8) | (where & ~0x3);
+ /* Pick up any address that falls below the page mask */
offset |= cfg_base & ~PAGE_MASK;
- /* page boundary */
+ /* Page boundary */
cfg_base = cfg_base & PAGE_MASK;
/*
* To improve performance, if the current device is the same as
* the last device accessed, we don't touch the TLB.
*/
- entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
- entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+ entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+ entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
(unsigned long)pci_cfg_vm->addr, PM_4K);
last_entryLo1 = entryLo1;
}
- if (access_type == PCI_ACCESS_WRITE) {
+ if (access_type == PCI_ACCESS_WRITE)
au_writel(*data, (int)(pci_cfg_vm->addr + offset));
- } else {
+ else
*data = au_readl((int)(pci_cfg_vm->addr + offset));
- }
+
au_sync_udelay(2);
- DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
- access_type, bus->number, device, where, *data, offset);
+ DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
+ access_type, bus->number, device, where, *data, offset);
- /* check master abort */
+ /* Check master abort */
status = au_readl(Au1500_PCI_STATCMD);
- if (status & (1<<29)) {
+ if (status & (1 << 29)) {
*data = 0xffffffff;
error = -1;
DBG("Au1x Master Abort\n");
} else if ((status >> 28) & 0xf) {
- DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
+ DBG("PCI ERR detected: device %u, status %lx\n",
+ device, (status >> 28) & 0xf);
- /* clear errors */
+ /* Clear errors */
au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
*data = 0xffffffff;
error = -1;
}
- /* Take away the idsel.
- */
- if (board_pci_idsel) {
+ /* Take away the IDSEL. */
+ if (board_pci_idsel)
(void)board_pci_idsel(device, 0);
- }
local_irq_restore(flags);
return error;
}
static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 * val)
+ int where, u8 *val)
{
u32 data;
int ret;
return ret;
}
-
static int read_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 * val)
+ int where, u16 *val)
{
u32 data;
int ret;
}
static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 * val)
+ int where, u32 *val)
{
int ret;
return ret;
}
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
- u8 val)
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 val)
{
u32 data = 0;
return -1;
data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
- u16 val)
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 val)
{
u32 data = 0;
return -1;
data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
-
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
- u32 val)
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 val)
{
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
return -1;
}
static int config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
+ int where, int size, u32 *val)
{
switch (size) {
case 1: {
u8 _val;
int rc = read_config_byte(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
- case 2: {
+ case 2: {
u16 _val;
int rc = read_config_word(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
}
}
-
struct pci_ops au1x_pci_ops = {
config_read,
config_write
struct hwbutton_interrupt *hirq = data;
unsigned long cic_ext = *CIC_EXT_CFG_REG;
- if (irq != hirq->irq)
- return IRQ_NONE;
-
if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
/* Interrupt: pin is now HI */
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
*CIC_EXT_CFG_REG = cic_ext;
return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED,
- hirq->name, (void *)hirq);
+ hirq->name, hirq);
}
static int __init msp_hwbutton_setup(void)
}
}
-unsigned int rt_timer_irq;
+int rt_timer_irq;
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
static void __init hub_rt_clock_event_global_init(void)
{
- unsigned int irq;
+ int irq;
do {
smp_wmb();
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
+endif
+
+
clean-files := vmlinux.lds
.dcache_bsize = 32,
.machine_check = machine_check_e200,
.platform = "ppc5554",
+ }
#endif /* CONFIG_E200 */
#ifdef CONFIG_E500
{ /* e500 */
.dcache_bsize = 32,
.machine_check = machine_check_e500,
.platform = "powerpc",
+ }
#endif /* CONFIG_E500 */
#endif /* CONFIG_PPC32 */
};
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += div64.o copy_32.o
+obj-$(CONFIG_HAS_IOMEM) += devres.o
endif
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
endif
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
-obj-$(CONFIG_HAS_IOMEM) += devres.o
KBUILD_CFLAGS += $(cpu-as-y)
# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
+KBUILD_DEFCONFIG := ebony_defconfig
head-y := arch/ppc/kernel/head.o
head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/ocp.h>
+#include <asm/irq.h>
#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
defined(CONFIG_PPC_MPC52xx))
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <linux/proc_fs.h>
#include <asm/sections.h>
#include <asm/mmu.h>
LOAD_PT_PRIV(sp, t_psr, t_pc, t_npc)
or %t_pc, %t_npc, %g2
andcc %g2, 0x3, %g0
- sethi %hi(PSR_SYCALL), %g2
+ sethi %hi(PSR_SYSCALL), %g2
be 1f
andn %t_psr, %g2, %t_psr
static void __init inherit_prom_mappings(void)
{
- read_obp_translations();
-
/* Now fixup OBP's idea about where we really are mapped. */
printk("Remapping the kernel... ");
remap_kernel();
lmb_init();
- /* Find available physical memory... */
+ /* Find available physical memory...
+ *
+ * Read it twice in order to work around a bug in openfirmware.
+ * The call to grab this table itself can cause openfirmware to
+ * allocate memory, which in turn can take away some space from
+ * the list of available memory. Reading it twice makes sure
+ * we really do get the final value.
+ */
+ read_obp_translations();
+ read_obp_memory("reg", &pall[0], &pall_ents);
+ read_obp_memory("available", &pavail[0], &pavail_ents);
read_obp_memory("available", &pavail[0], &pavail_ents);
phys_base = 0xffffffffffffffffUL;
inherit_prom_mappings();
- read_obp_memory("reg", &pall[0], &pall_ents);
-
init_kpte_bitmap();
/* Ok, we can use our TLB miss and window trap handlers safely. */
goto out_mem;
}
- priv->psc_base = r->start;
+ priv->psc_base = CKSEG1ADDR(r->start);
priv->xfer_timeout = 200;
priv->ack_timeout = 200;
* We need a write method.
*/
- if (tty->ops->write == NULL)
+ if (tty->ops->write == NULL || tty->ops->set_termios == NULL)
return -EOPNOTSUPP;
/*
shutdown(info);
rs_flush_buffer(tty);
- tty_ldisc_flush_buffer(tty);
+ tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
#include <asm/byteorder.h>
#include <linux/io.h>
+#include <linux/jiffies.h>
#include <linux/usb/c67x00.h>
#include "c67x00.h"
__clear_bit(nr, addr);
}
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+
/*
* Return the bit position (0..63) of the most significant 1 bit in a word
* Returns -1 if no 1 bit exists
*/
-static inline int __ilog2(unsigned long x)
+static inline unsigned long __fls(unsigned long x)
{
int lz;
return 63 - lz;
}
-static inline unsigned long __fls(unsigned long x)
-{
- return __ilog2(x);
-}
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-
/*
* __ffs - find first bit in word.
* @word: The word to search
*/
static inline unsigned long __ffs(unsigned long word)
{
- return __ilog2(word & -word);
+ return __fls(word & -word);
}
/*
#else
#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/fls64.h>
#define _ASM_COMPILER_H
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
-#define GCC_IMM_ASM "n"
+#define GCC_IMM_ASM() "n"
#define GCC_REG_ACCUM "$0"
#else
-#define GCC_IMM_ASM "rn"
+#define GCC_IMM_ASM() "rn"
#define GCC_REG_ACCUM "accum"
#endif
#include <linux/delay.h>
#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
/* cpu pipeline flush */
void static inline au_sync(void)
void static inline au_writeb(u8 val, unsigned long reg)
{
- *(volatile u8 *)(reg) = val;
+ *(volatile u8 *)reg = val;
}
void static inline au_writew(u16 val, unsigned long reg)
{
- *(volatile u16 *)(reg) = val;
+ *(volatile u16 *)reg = val;
}
void static inline au_writel(u32 val, unsigned long reg)
{
- *(volatile u32 *)(reg) = val;
+ *(volatile u32 *)reg = val;
}
static inline u8 au_readb(unsigned long reg)
{
- return (*(volatile u8 *)reg);
+ return *(volatile u8 *)reg;
}
static inline u16 au_readw(unsigned long reg)
{
- return (*(volatile u16 *)reg);
+ return *(volatile u16 *)reg;
}
static inline u32 au_readl(unsigned long reg)
{
- return (*(volatile u32 *)reg);
+ return *(volatile u32 *)reg;
}
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*
- * SDRAM Register Offsets
+ * SDRAM register offsets
*/
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 (0x0000)
-#define MEM_SDMODE1 (0x0004)
-#define MEM_SDMODE2 (0x0008)
-#define MEM_SDADDR0 (0x000C)
-#define MEM_SDADDR1 (0x0010)
-#define MEM_SDADDR2 (0x0014)
-#define MEM_SDREFCFG (0x0018)
-#define MEM_SDPRECMD (0x001C)
-#define MEM_SDAUTOREF (0x0020)
-#define MEM_SDWRMD0 (0x0024)
-#define MEM_SDWRMD1 (0x0028)
-#define MEM_SDWRMD2 (0x002C)
-#define MEM_SDSLEEP (0x0030)
-#define MEM_SDSMCKE (0x0034)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
+#define MEM_SDMODE0 0x0000
+#define MEM_SDMODE1 0x0004
+#define MEM_SDMODE2 0x0008
+#define MEM_SDADDR0 0x000C
+#define MEM_SDADDR1 0x0010
+#define MEM_SDADDR2 0x0014
+#define MEM_SDREFCFG 0x0018
+#define MEM_SDPRECMD 0x001C
+#define MEM_SDAUTOREF 0x0020
+#define MEM_SDWRMD0 0x0024
+#define MEM_SDWRMD1 0x0028
+#define MEM_SDWRMD2 0x002C
+#define MEM_SDSLEEP 0x0030
+#define MEM_SDSMCKE 0x0034
/*
* MEM_SDMODE register content definitions
*/
-#define MEM_SDMODE_F (1<<22)
-#define MEM_SDMODE_SR (1<<21)
-#define MEM_SDMODE_BS (1<<20)
-#define MEM_SDMODE_RS (3<<18)
-#define MEM_SDMODE_CS (7<<15)
-#define MEM_SDMODE_TRAS (15<<11)
-#define MEM_SDMODE_TMRD (3<<9)
-#define MEM_SDMODE_TWR (3<<7)
-#define MEM_SDMODE_TRP (3<<5)
-#define MEM_SDMODE_TRCD (3<<3)
-#define MEM_SDMODE_TCL (7<<0)
-
-#define MEM_SDMODE_BS_2Bank (0<<20)
-#define MEM_SDMODE_BS_4Bank (1<<20)
-#define MEM_SDMODE_RS_11Row (0<<18)
-#define MEM_SDMODE_RS_12Row (1<<18)
-#define MEM_SDMODE_RS_13Row (2<<18)
-#define MEM_SDMODE_RS_N(N) ((N)<<18)
-#define MEM_SDMODE_CS_7Col (0<<15)
-#define MEM_SDMODE_CS_8Col (1<<15)
-#define MEM_SDMODE_CS_9Col (2<<15)
-#define MEM_SDMODE_CS_10Col (3<<15)
-#define MEM_SDMODE_CS_11Col (4<<15)
-#define MEM_SDMODE_CS_N(N) ((N)<<15)
-#define MEM_SDMODE_TRAS_N(N) ((N)<<11)
-#define MEM_SDMODE_TMRD_N(N) ((N)<<9)
-#define MEM_SDMODE_TWR_N(N) ((N)<<7)
-#define MEM_SDMODE_TRP_N(N) ((N)<<5)
-#define MEM_SDMODE_TRCD_N(N) ((N)<<3)
-#define MEM_SDMODE_TCL_N(N) ((N)<<0)
+#define MEM_SDMODE_F (1 << 22)
+#define MEM_SDMODE_SR (1 << 21)
+#define MEM_SDMODE_BS (1 << 20)
+#define MEM_SDMODE_RS (3 << 18)
+#define MEM_SDMODE_CS (7 << 15)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TWR (3 << 7)
+#define MEM_SDMODE_TRP (3 << 5)
+#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TCL (7 << 0)
+
+#define MEM_SDMODE_BS_2Bank (0 << 20)
+#define MEM_SDMODE_BS_4Bank (1 << 20)
+#define MEM_SDMODE_RS_11Row (0 << 18)
+#define MEM_SDMODE_RS_12Row (1 << 18)
+#define MEM_SDMODE_RS_13Row (2 << 18)
+#define MEM_SDMODE_RS_N(N) ((N) << 18)
+#define MEM_SDMODE_CS_7Col (0 << 15)
+#define MEM_SDMODE_CS_8Col (1 << 15)
+#define MEM_SDMODE_CS_9Col (2 << 15)
+#define MEM_SDMODE_CS_10Col (3 << 15)
+#define MEM_SDMODE_CS_11Col (4 << 15)
+#define MEM_SDMODE_CS_N(N) ((N) << 15)
+#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
+#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
+#define MEM_SDMODE_TWR_N(N) ((N) << 7)
+#define MEM_SDMODE_TRP_N(N) ((N) << 5)
+#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
+#define MEM_SDMODE_TCL_N(N) ((N) << 0)
/*
* MEM_SDADDR register contents definitions
*/
-#define MEM_SDADDR_E (1<<20)
-#define MEM_SDADDR_CSBA (0x03FF<<10)
-#define MEM_SDADDR_CSMASK (0x03FF<<0)
-#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12)
-#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22)
+#define MEM_SDADDR_E (1 << 20)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSMASK (0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
/*
* MEM_SDREFCFG register content definitions
*/
-#define MEM_SDREFCFG_TRC (15<<28)
-#define MEM_SDREFCFG_TRPM (3<<26)
-#define MEM_SDREFCFG_E (1<<25)
-#define MEM_SDREFCFG_RE (0x1ffffff<<0)
-#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC)
-#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_TRC (15 << 28)
+#define MEM_SDREFCFG_TRPM (3 << 26)
+#define MEM_SDREFCFG_E (1 << 25)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
#define MEM_SDREFCFG_REF_N(N) (N)
#endif
/***********************************************************************/
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_SDMODE0 (0x0800)
-#define MEM_SDMODE1 (0x0808)
-#define MEM_SDMODE2 (0x0810)
-#define MEM_SDADDR0 (0x0820)
-#define MEM_SDADDR1 (0x0828)
-#define MEM_SDADDR2 (0x0830)
-#define MEM_SDCONFIGA (0x0840)
-#define MEM_SDCONFIGB (0x0848)
-#define MEM_SDSTAT (0x0850)
-#define MEM_SDERRADDR (0x0858)
-#define MEM_SDSTRIDE0 (0x0860)
-#define MEM_SDSTRIDE1 (0x0868)
-#define MEM_SDSTRIDE2 (0x0870)
-#define MEM_SDWRMD0 (0x0880)
-#define MEM_SDWRMD1 (0x0888)
-#define MEM_SDWRMD2 (0x0890)
-#define MEM_SDPRECMD (0x08C0)
-#define MEM_SDAUTOREF (0x08C8)
-#define MEM_SDSREF (0x08D0)
+#define MEM_SDMODE0 0x0800
+#define MEM_SDMODE1 0x0808
+#define MEM_SDMODE2 0x0810
+#define MEM_SDADDR0 0x0820
+#define MEM_SDADDR1 0x0828
+#define MEM_SDADDR2 0x0830
+#define MEM_SDCONFIGA 0x0840
+#define MEM_SDCONFIGB 0x0848
+#define MEM_SDSTAT 0x0850
+#define MEM_SDERRADDR 0x0858
+#define MEM_SDSTRIDE0 0x0860
+#define MEM_SDSTRIDE1 0x0868
+#define MEM_SDSTRIDE2 0x0870
+#define MEM_SDWRMD0 0x0880
+#define MEM_SDWRMD1 0x0888
+#define MEM_SDWRMD2 0x0890
+#define MEM_SDPRECMD 0x08C0
+#define MEM_SDAUTOREF 0x08C8
+#define MEM_SDSREF 0x08D0
#define MEM_SDSLEEP MEM_SDSREF
#endif
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define SYS_PHYS_ADDR 0x11900000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
#define SYS_PHYS_ADDR 0x11900000
#define DDMA_PHYS_ADDR 0x14002000
#define PE_PHYS_ADDR 0x14008000
-#define PSC0_PHYS_ADDR 0x11A00000
-#define PSC1_PHYS_ADDR 0x11B00000
-#define PSC2_PHYS_ADDR 0x10A00000
-#define PSC3_PHYS_ADDR 0x10B00000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PSC2_PHYS_ADDR 0x10A00000
+#define PSC3_PHYS_ADDR 0x10B00000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
#define MAEBE_PHYS_ADDR 0x14010000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
-
/* Static Bus Controller */
-#define MEM_STCFG0 0xB4001000
-#define MEM_STTIME0 0xB4001004
-#define MEM_STADDR0 0xB4001008
+#define MEM_STCFG0 0xB4001000
+#define MEM_STTIME0 0xB4001004
+#define MEM_STADDR0 0xB4001008
-#define MEM_STCFG1 0xB4001010
-#define MEM_STTIME1 0xB4001014
-#define MEM_STADDR1 0xB4001018
+#define MEM_STCFG1 0xB4001010
+#define MEM_STTIME1 0xB4001014
+#define MEM_STADDR1 0xB4001018
-#define MEM_STCFG2 0xB4001020
-#define MEM_STTIME2 0xB4001024
-#define MEM_STADDR2 0xB4001028
+#define MEM_STCFG2 0xB4001020
+#define MEM_STTIME2 0xB4001024
+#define MEM_STADDR2 0xB4001028
-#define MEM_STCFG3 0xB4001030
-#define MEM_STTIME3 0xB4001034
-#define MEM_STADDR3 0xB4001038
+#define MEM_STCFG3 0xB4001030
+#define MEM_STTIME3 0xB4001034
+#define MEM_STADDR3 0xB4001038
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_STNDCTL 0xB4001100
-#define MEM_STSTAT 0xB4001104
+#define MEM_STNDCTL 0xB4001100
+#define MEM_STSTAT 0xB4001104
-#define MEM_STNAND_CMD (0x0)
-#define MEM_STNAND_ADDR (0x4)
-#define MEM_STNAND_DATA (0x20)
+#define MEM_STNAND_CMD 0x0
+#define MEM_STNAND_ADDR 0x4
+#define MEM_STNAND_DATA 0x20
#endif
/* Interrupt Controller 0 */
-#define IC0_CFG0RD 0xB0400040
-#define IC0_CFG0SET 0xB0400040
-#define IC0_CFG0CLR 0xB0400044
+#define IC0_CFG0RD 0xB0400040
+#define IC0_CFG0SET 0xB0400040
+#define IC0_CFG0CLR 0xB0400044
-#define IC0_CFG1RD 0xB0400048
-#define IC0_CFG1SET 0xB0400048
-#define IC0_CFG1CLR 0xB040004C
+#define IC0_CFG1RD 0xB0400048
+#define IC0_CFG1SET 0xB0400048
+#define IC0_CFG1CLR 0xB040004C
-#define IC0_CFG2RD 0xB0400050
-#define IC0_CFG2SET 0xB0400050
-#define IC0_CFG2CLR 0xB0400054
+#define IC0_CFG2RD 0xB0400050
+#define IC0_CFG2SET 0xB0400050
+#define IC0_CFG2CLR 0xB0400054
-#define IC0_REQ0INT 0xB0400054
-#define IC0_SRCRD 0xB0400058
-#define IC0_SRCSET 0xB0400058
-#define IC0_SRCCLR 0xB040005C
-#define IC0_REQ1INT 0xB040005C
+#define IC0_REQ0INT 0xB0400054
+#define IC0_SRCRD 0xB0400058
+#define IC0_SRCSET 0xB0400058
+#define IC0_SRCCLR 0xB040005C
+#define IC0_REQ1INT 0xB040005C
-#define IC0_ASSIGNRD 0xB0400060
-#define IC0_ASSIGNSET 0xB0400060
-#define IC0_ASSIGNCLR 0xB0400064
+#define IC0_ASSIGNRD 0xB0400060
+#define IC0_ASSIGNSET 0xB0400060
+#define IC0_ASSIGNCLR 0xB0400064
-#define IC0_WAKERD 0xB0400068
-#define IC0_WAKESET 0xB0400068
-#define IC0_WAKECLR 0xB040006C
+#define IC0_WAKERD 0xB0400068
+#define IC0_WAKESET 0xB0400068
+#define IC0_WAKECLR 0xB040006C
-#define IC0_MASKRD 0xB0400070
-#define IC0_MASKSET 0xB0400070
-#define IC0_MASKCLR 0xB0400074
+#define IC0_MASKRD 0xB0400070
+#define IC0_MASKSET 0xB0400070
+#define IC0_MASKCLR 0xB0400074
-#define IC0_RISINGRD 0xB0400078
-#define IC0_RISINGCLR 0xB0400078
-#define IC0_FALLINGRD 0xB040007C
-#define IC0_FALLINGCLR 0xB040007C
+#define IC0_RISINGRD 0xB0400078
+#define IC0_RISINGCLR 0xB0400078
+#define IC0_FALLINGRD 0xB040007C
+#define IC0_FALLINGCLR 0xB040007C
-#define IC0_TESTBIT 0xB0400080
+#define IC0_TESTBIT 0xB0400080
/* Interrupt Controller 1 */
-#define IC1_CFG0RD 0xB1800040
-#define IC1_CFG0SET 0xB1800040
-#define IC1_CFG0CLR 0xB1800044
+#define IC1_CFG0RD 0xB1800040
+#define IC1_CFG0SET 0xB1800040
+#define IC1_CFG0CLR 0xB1800044
-#define IC1_CFG1RD 0xB1800048
-#define IC1_CFG1SET 0xB1800048
-#define IC1_CFG1CLR 0xB180004C
+#define IC1_CFG1RD 0xB1800048
+#define IC1_CFG1SET 0xB1800048
+#define IC1_CFG1CLR 0xB180004C
-#define IC1_CFG2RD 0xB1800050
-#define IC1_CFG2SET 0xB1800050
-#define IC1_CFG2CLR 0xB1800054
+#define IC1_CFG2RD 0xB1800050
+#define IC1_CFG2SET 0xB1800050
+#define IC1_CFG2CLR 0xB1800054
-#define IC1_REQ0INT 0xB1800054
-#define IC1_SRCRD 0xB1800058
-#define IC1_SRCSET 0xB1800058
-#define IC1_SRCCLR 0xB180005C
-#define IC1_REQ1INT 0xB180005C
+#define IC1_REQ0INT 0xB1800054
+#define IC1_SRCRD 0xB1800058
+#define IC1_SRCSET 0xB1800058
+#define IC1_SRCCLR 0xB180005C
+#define IC1_REQ1INT 0xB180005C
-#define IC1_ASSIGNRD 0xB1800060
-#define IC1_ASSIGNSET 0xB1800060
-#define IC1_ASSIGNCLR 0xB1800064
+#define IC1_ASSIGNRD 0xB1800060
+#define IC1_ASSIGNSET 0xB1800060
+#define IC1_ASSIGNCLR 0xB1800064
-#define IC1_WAKERD 0xB1800068
-#define IC1_WAKESET 0xB1800068
-#define IC1_WAKECLR 0xB180006C
+#define IC1_WAKERD 0xB1800068
+#define IC1_WAKESET 0xB1800068
+#define IC1_WAKECLR 0xB180006C
-#define IC1_MASKRD 0xB1800070
-#define IC1_MASKSET 0xB1800070
-#define IC1_MASKCLR 0xB1800074
+#define IC1_MASKRD 0xB1800070
+#define IC1_MASKSET 0xB1800070
+#define IC1_MASKCLR 0xB1800074
-#define IC1_RISINGRD 0xB1800078
-#define IC1_RISINGCLR 0xB1800078
-#define IC1_FALLINGRD 0xB180007C
-#define IC1_FALLINGCLR 0xB180007C
+#define IC1_RISINGRD 0xB1800078
+#define IC1_RISINGCLR 0xB1800078
+#define IC1_FALLINGRD 0xB180007C
+#define IC1_FALLINGCLR 0xB180007C
-#define IC1_TESTBIT 0xB1800080
+#define IC1_TESTBIT 0xB1800080
/* Interrupt Configuration Modes */
-#define INTC_INT_DISABLED 0
-#define INTC_INT_RISE_EDGE 0x1
-#define INTC_INT_FALL_EDGE 0x2
-#define INTC_INT_RISE_AND_FALL_EDGE 0x3
-#define INTC_INT_HIGH_LEVEL 0x5
-#define INTC_INT_LOW_LEVEL 0x6
-#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
+#define INTC_INT_DISABLED 0x0
+#define INTC_INT_RISE_EDGE 0x1
+#define INTC_INT_FALL_EDGE 0x2
+#define INTC_INT_RISE_AND_FALL_EDGE 0x3
+#define INTC_INT_HIGH_LEVEL 0x5
+#define INTC_INT_LOW_LEVEL 0x6
+#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
/* Interrupt Numbers */
/* Au1000 */
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART2_ADDR 0xB1300000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART2_ADDR 0xB1300000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
-#define AU1000_ETH0_BASE 0xB0500000
-#define AU1000_ETH1_BASE 0xB0510000
-#define AU1000_MAC0_ENABLE 0xB0520000
-#define AU1000_MAC1_ENABLE 0xB0520004
+#define AU1000_ETH0_BASE 0xB0500000
+#define AU1000_ETH1_BASE 0xB0510000
+#define AU1000_MAC0_ENABLE 0xB0520000
+#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1000 */
#define INTC AU1000_PCI_INTC
#define INTD AU1000_PCI_INTD
-#define UART0_ADDR 0xB1100000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017fffc
-#define AU1500_ETH0_BASE 0xB1500000
-#define AU1500_ETH1_BASE 0xB1510000
-#define AU1500_MAC0_ENABLE 0xB1520000
-#define AU1500_MAC1_ENABLE 0xB1520004
+#define AU1500_ETH0_BASE 0xB1500000
+#define AU1500_ETH1_BASE 0xB1510000
+#define AU1500_MAC0_ENABLE 0xB1520000
+#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1500 */
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
-#define AU1100_ETH0_BASE 0xB0500000
-#define AU1100_MAC0_ENABLE 0xB0520000
+#define AU1100_ETH0_BASE 0xB0500000
+#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
#endif /* CONFIG_SOC_AU1100 */
#define INTC AU1550_PCI_INTC
#define INTD AU1550_PCI_INTD
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap
-#define USB_OHCI_LEN 0x00060000
-#define USB_HOST_CONFIG 0xB4027ffc
+#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
+#define USB_OHCI_LEN 0x00060000
+#define USB_HOST_CONFIG 0xB4027ffc
-#define AU1550_ETH0_BASE 0xB0500000
-#define AU1550_ETH1_BASE 0xB0510000
-#define AU1550_MAC0_ENABLE 0xB0520000
-#define AU1550_MAC1_ENABLE 0xB0520004
+#define AU1550_ETH0_BASE 0xB0500000
+#define AU1550_ETH1_BASE 0xB0510000
+#define AU1550_MAC0_ENABLE 0xB0520000
+#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-
-#define USB_UOC_BASE 0x14020020
-#define USB_UOC_LEN 0x20
-#define USB_OHCI_BASE 0x14020100
-#define USB_OHCI_LEN 0x100
-#define USB_EHCI_BASE 0x14020200
-#define USB_EHCI_LEN 0x100
-#define USB_UDC_BASE 0x14022000
-#define USB_UDC_LEN 0x2000
-#define USB_MSR_BASE 0xB4020000
-#define USB_MSR_MCFG 4
-#define USBMSRMCFG_OMEMEN 0
-#define USBMSRMCFG_OBMEN 1
-#define USBMSRMCFG_EMEMEN 2
-#define USBMSRMCFG_EBMEN 3
-#define USBMSRMCFG_DMEMEN 4
-#define USBMSRMCFG_DBMEN 5
-#define USBMSRMCFG_GMEMEN 6
-#define USBMSRMCFG_OHCCLKEN 16
-#define USBMSRMCFG_EHCCLKEN 17
-#define USBMSRMCFG_UDCCLKEN 18
-#define USBMSRMCFG_PHYPLLEN 19
-#define USBMSRMCFG_RDCOMB 30
-#define USBMSRMCFG_PFEN 31
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+
+#define USB_UOC_BASE 0x14020020
+#define USB_UOC_LEN 0x20
+#define USB_OHCI_BASE 0x14020100
+#define USB_OHCI_LEN 0x100
+#define USB_EHCI_BASE 0x14020200
+#define USB_EHCI_LEN 0x100
+#define USB_UDC_BASE 0x14022000
+#define USB_UDC_LEN 0x2000
+#define USB_MSR_BASE 0xB4020000
+#define USB_MSR_MCFG 4
+#define USBMSRMCFG_OMEMEN 0
+#define USBMSRMCFG_OBMEN 1
+#define USBMSRMCFG_EMEMEN 2
+#define USBMSRMCFG_EBMEN 3
+#define USBMSRMCFG_DMEMEN 4
+#define USBMSRMCFG_DBMEN 5
+#define USBMSRMCFG_GMEMEN 6
+#define USBMSRMCFG_OHCCLKEN 16
+#define USBMSRMCFG_EHCCLKEN 17
+#define USBMSRMCFG_UDCCLKEN 18
+#define USBMSRMCFG_PHYPLLEN 19
+#define USBMSRMCFG_RDCOMB 30
+#define USBMSRMCFG_PFEN 31
#endif /* CONFIG_SOC_AU1200 */
#define INTX 0xFF /* not valid */
/* Programmable Counters 0 and 1 */
-#define SYS_BASE 0xB1900000
-#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
-# define SYS_CNTRL_E1S (1<<23)
-# define SYS_CNTRL_T1S (1<<20)
-# define SYS_CNTRL_M21 (1<<19)
-# define SYS_CNTRL_M11 (1<<18)
-# define SYS_CNTRL_M01 (1<<17)
-# define SYS_CNTRL_C1S (1<<16)
-# define SYS_CNTRL_BP (1<<14)
-# define SYS_CNTRL_EN1 (1<<13)
-# define SYS_CNTRL_BT1 (1<<12)
-# define SYS_CNTRL_EN0 (1<<11)
-# define SYS_CNTRL_BT0 (1<<10)
-# define SYS_CNTRL_E0 (1<<8)
-# define SYS_CNTRL_E0S (1<<7)
-# define SYS_CNTRL_32S (1<<5)
-# define SYS_CNTRL_T0S (1<<4)
-# define SYS_CNTRL_M20 (1<<3)
-# define SYS_CNTRL_M10 (1<<2)
-# define SYS_CNTRL_M00 (1<<1)
-# define SYS_CNTRL_C0S (1<<0)
+#define SYS_BASE 0xB1900000
+#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
+# define SYS_CNTRL_E1S (1 << 23)
+# define SYS_CNTRL_T1S (1 << 20)
+# define SYS_CNTRL_M21 (1 << 19)
+# define SYS_CNTRL_M11 (1 << 18)
+# define SYS_CNTRL_M01 (1 << 17)
+# define SYS_CNTRL_C1S (1 << 16)
+# define SYS_CNTRL_BP (1 << 14)
+# define SYS_CNTRL_EN1 (1 << 13)
+# define SYS_CNTRL_BT1 (1 << 12)
+# define SYS_CNTRL_EN0 (1 << 11)
+# define SYS_CNTRL_BT0 (1 << 10)
+# define SYS_CNTRL_E0 (1 << 8)
+# define SYS_CNTRL_E0S (1 << 7)
+# define SYS_CNTRL_32S (1 << 5)
+# define SYS_CNTRL_T0S (1 << 4)
+# define SYS_CNTRL_M20 (1 << 3)
+# define SYS_CNTRL_M10 (1 << 2)
+# define SYS_CNTRL_M00 (1 << 1)
+# define SYS_CNTRL_C0S (1 << 0)
/* Programmable Counter 0 Registers */
-#define SYS_TOYTRIM (SYS_BASE + 0)
-#define SYS_TOYWRITE (SYS_BASE + 4)
-#define SYS_TOYMATCH0 (SYS_BASE + 8)
-#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
-#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
-#define SYS_TOYREAD (SYS_BASE + 0x40)
+#define SYS_TOYTRIM (SYS_BASE + 0)
+#define SYS_TOYWRITE (SYS_BASE + 4)
+#define SYS_TOYMATCH0 (SYS_BASE + 8)
+#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
+#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
+#define SYS_TOYREAD (SYS_BASE + 0x40)
/* Programmable Counter 1 Registers */
-#define SYS_RTCTRIM (SYS_BASE + 0x44)
-#define SYS_RTCWRITE (SYS_BASE + 0x48)
-#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
-#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
-#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
-#define SYS_RTCREAD (SYS_BASE + 0x58)
+#define SYS_RTCTRIM (SYS_BASE + 0x44)
+#define SYS_RTCWRITE (SYS_BASE + 0x48)
+#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
+#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
+#define SYS_RTCREAD (SYS_BASE + 0x58)
/* I2S Controller */
-#define I2S_DATA 0xB1000000
-# define I2S_DATA_MASK (0xffffff)
-#define I2S_CONFIG 0xB1000004
-# define I2S_CONFIG_XU (1<<25)
-# define I2S_CONFIG_XO (1<<24)
-# define I2S_CONFIG_RU (1<<23)
-# define I2S_CONFIG_RO (1<<22)
-# define I2S_CONFIG_TR (1<<21)
-# define I2S_CONFIG_TE (1<<20)
-# define I2S_CONFIG_TF (1<<19)
-# define I2S_CONFIG_RR (1<<18)
-# define I2S_CONFIG_RE (1<<17)
-# define I2S_CONFIG_RF (1<<16)
-# define I2S_CONFIG_PD (1<<11)
-# define I2S_CONFIG_LB (1<<10)
-# define I2S_CONFIG_IC (1<<9)
-# define I2S_CONFIG_FM_BIT 7
-# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_TN (1<<6)
-# define I2S_CONFIG_RN (1<<5)
-# define I2S_CONFIG_SZ_BIT 0
-# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
-
-#define I2S_CONTROL 0xB1000008
-# define I2S_CONTROL_D (1<<1)
-# define I2S_CONTROL_CE (1<<0)
+#define I2S_DATA 0xB1000000
+# define I2S_DATA_MASK 0xffffff
+#define I2S_CONFIG 0xB1000004
+# define I2S_CONFIG_XU (1 << 25)
+# define I2S_CONFIG_XO (1 << 24)
+# define I2S_CONFIG_RU (1 << 23)
+# define I2S_CONFIG_RO (1 << 22)
+# define I2S_CONFIG_TR (1 << 21)
+# define I2S_CONFIG_TE (1 << 20)
+# define I2S_CONFIG_TF (1 << 19)
+# define I2S_CONFIG_RR (1 << 18)
+# define I2S_CONFIG_RE (1 << 17)
+# define I2S_CONFIG_RF (1 << 16)
+# define I2S_CONFIG_PD (1 << 11)
+# define I2S_CONFIG_LB (1 << 10)
+# define I2S_CONFIG_IC (1 << 9)
+# define I2S_CONFIG_FM_BIT 7
+# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_TN (1 << 6)
+# define I2S_CONFIG_RN (1 << 5)
+# define I2S_CONFIG_SZ_BIT 0
+# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
+
+#define I2S_CONTROL 0xB1000008
+# define I2S_CONTROL_D (1 << 1)
+# define I2S_CONTROL_CE (1 << 0)
/* USB Host Controller */
#ifndef USB_OHCI_LEN
-#define USB_OHCI_LEN 0x00100000
+#define USB_OHCI_LEN 0x00100000
#endif
#ifndef CONFIG_SOC_AU1200
/* USB Device Controller */
-#define USBD_EP0RD 0xB0200000
-#define USBD_EP0WR 0xB0200004
-#define USBD_EP2WR 0xB0200008
-#define USBD_EP3WR 0xB020000C
-#define USBD_EP4RD 0xB0200010
-#define USBD_EP5RD 0xB0200014
-#define USBD_INTEN 0xB0200018
-#define USBD_INTSTAT 0xB020001C
-# define USBDEV_INT_SOF (1<<12)
-# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
-# define USBDEV_INT_CMPLT_BIT 0
+#define USBD_EP0RD 0xB0200000
+#define USBD_EP0WR 0xB0200004
+#define USBD_EP2WR 0xB0200008
+#define USBD_EP3WR 0xB020000C
+#define USBD_EP4RD 0xB0200010
+#define USBD_EP5RD 0xB0200014
+#define USBD_INTEN 0xB0200018
+#define USBD_INTSTAT 0xB020001C
+# define USBDEV_INT_SOF (1 << 12)
+# define USBDEV_INT_HF_BIT 6
+# define USBDEV_INT_HF_MASK 0x3f << USBDEV_INT_HF_BIT)
+# define USBDEV_INT_CMPLT_BIT 0
# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG 0xB0200020
-#define USBD_EP0CS 0xB0200024
-#define USBD_EP2CS 0xB0200028
-#define USBD_EP3CS 0xB020002C
-#define USBD_EP4CS 0xB0200030
-#define USBD_EP5CS 0xB0200034
-# define USBDEV_CS_SU (1<<14)
-# define USBDEV_CS_NAK (1<<13)
-# define USBDEV_CS_ACK (1<<12)
-# define USBDEV_CS_BUSY (1<<11)
-# define USBDEV_CS_TSIZE_BIT 1
-# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
-# define USBDEV_CS_STALL (1<<0)
-#define USBD_EP0RDSTAT 0xB0200040
-#define USBD_EP0WRSTAT 0xB0200044
-#define USBD_EP2WRSTAT 0xB0200048
-#define USBD_EP3WRSTAT 0xB020004C
-#define USBD_EP4RDSTAT 0xB0200050
-#define USBD_EP5RDSTAT 0xB0200054
-# define USBDEV_FSTAT_FLUSH (1<<6)
-# define USBDEV_FSTAT_UF (1<<5)
-# define USBDEV_FSTAT_OF (1<<4)
-# define USBDEV_FSTAT_FCNT_BIT 0
+#define USBD_CONFIG 0xB0200020
+#define USBD_EP0CS 0xB0200024
+#define USBD_EP2CS 0xB0200028
+#define USBD_EP3CS 0xB020002C
+#define USBD_EP4CS 0xB0200030
+#define USBD_EP5CS 0xB0200034
+# define USBDEV_CS_SU (1 << 14)
+# define USBDEV_CS_NAK (1 << 13)
+# define USBDEV_CS_ACK (1 << 12)
+# define USBDEV_CS_BUSY (1 << 11)
+# define USBDEV_CS_TSIZE_BIT 1
+# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
+# define USBDEV_CS_STALL (1 << 0)
+#define USBD_EP0RDSTAT 0xB0200040
+#define USBD_EP0WRSTAT 0xB0200044
+#define USBD_EP2WRSTAT 0xB0200048
+#define USBD_EP3WRSTAT 0xB020004C
+#define USBD_EP4RDSTAT 0xB0200050
+#define USBD_EP5RDSTAT 0xB0200054
+# define USBDEV_FSTAT_FLUSH (1 << 6)
+# define USBDEV_FSTAT_UF (1 << 5)
+# define USBDEV_FSTAT_OF (1 << 4)
+# define USBDEV_FSTAT_FCNT_BIT 0
# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE 0xB0200058
-# define USBDEV_ENABLE (1<<1)
-# define USBDEV_CE (1<<0)
+#define USBD_ENABLE 0xB0200058
+# define USBDEV_ENABLE (1 << 1)
+# define USBDEV_CE (1 << 0)
#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
-#define MAC_CONTROL 0x0
-# define MAC_RX_ENABLE (1<<2)
-# define MAC_TX_ENABLE (1<<3)
-# define MAC_DEF_CHECK (1<<5)
-# define MAC_SET_BL(X) (((X)&0x3)<<6)
-# define MAC_AUTO_PAD (1<<8)
-# define MAC_DISABLE_RETRY (1<<10)
-# define MAC_DISABLE_BCAST (1<<11)
-# define MAC_LATE_COL (1<<12)
-# define MAC_HASH_MODE (1<<13)
-# define MAC_HASH_ONLY (1<<15)
-# define MAC_PASS_ALL (1<<16)
-# define MAC_INVERSE_FILTER (1<<17)
-# define MAC_PROMISCUOUS (1<<18)
-# define MAC_PASS_ALL_MULTI (1<<19)
-# define MAC_FULL_DUPLEX (1<<20)
-# define MAC_NORMAL_MODE 0
-# define MAC_INT_LOOPBACK (1<<21)
-# define MAC_EXT_LOOPBACK (1<<22)
-# define MAC_DISABLE_RX_OWN (1<<23)
-# define MAC_BIG_ENDIAN (1<<30)
-# define MAC_RX_ALL (1<<31)
-#define MAC_ADDRESS_HIGH 0x4
-#define MAC_ADDRESS_LOW 0x8
-#define MAC_MCAST_HIGH 0xC
-#define MAC_MCAST_LOW 0x10
-#define MAC_MII_CNTRL 0x14
-# define MAC_MII_BUSY (1<<0)
-# define MAC_MII_READ 0
-# define MAC_MII_WRITE (1<<1)
-# define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6)
-# define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11)
-#define MAC_MII_DATA 0x18
-#define MAC_FLOW_CNTRL 0x1C
-# define MAC_FLOW_CNTRL_BUSY (1<<0)
-# define MAC_FLOW_CNTRL_ENABLE (1<<1)
-# define MAC_PASS_CONTROL (1<<2)
-# define MAC_SET_PAUSE(X) (((X)&0xffff)<<16)
-#define MAC_VLAN1_TAG 0x20
-#define MAC_VLAN2_TAG 0x24
+#define MAC_CONTROL 0x0
+# define MAC_RX_ENABLE (1 << 2)
+# define MAC_TX_ENABLE (1 << 3)
+# define MAC_DEF_CHECK (1 << 5)
+# define MAC_SET_BL(X) (((X) & 0x3) << 6)
+# define MAC_AUTO_PAD (1 << 8)
+# define MAC_DISABLE_RETRY (1 << 10)
+# define MAC_DISABLE_BCAST (1 << 11)
+# define MAC_LATE_COL (1 << 12)
+# define MAC_HASH_MODE (1 << 13)
+# define MAC_HASH_ONLY (1 << 15)
+# define MAC_PASS_ALL (1 << 16)
+# define MAC_INVERSE_FILTER (1 << 17)
+# define MAC_PROMISCUOUS (1 << 18)
+# define MAC_PASS_ALL_MULTI (1 << 19)
+# define MAC_FULL_DUPLEX (1 << 20)
+# define MAC_NORMAL_MODE 0
+# define MAC_INT_LOOPBACK (1 << 21)
+# define MAC_EXT_LOOPBACK (1 << 22)
+# define MAC_DISABLE_RX_OWN (1 << 23)
+# define MAC_BIG_ENDIAN (1 << 30)
+# define MAC_RX_ALL (1 << 31)
+#define MAC_ADDRESS_HIGH 0x4
+#define MAC_ADDRESS_LOW 0x8
+#define MAC_MCAST_HIGH 0xC
+#define MAC_MCAST_LOW 0x10
+#define MAC_MII_CNTRL 0x14
+# define MAC_MII_BUSY (1 << 0)
+# define MAC_MII_READ 0
+# define MAC_MII_WRITE (1 << 1)
+# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA 0x18
+#define MAC_FLOW_CNTRL 0x1C
+# define MAC_FLOW_CNTRL_BUSY (1 << 0)
+# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+# define MAC_PASS_CONTROL (1 << 2)
+# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG 0x20
+#define MAC_VLAN2_TAG 0x24
/* Ethernet Controller Enable */
-# define MAC_EN_CLOCK_ENABLE (1<<0)
-# define MAC_EN_RESET0 (1<<1)
-# define MAC_EN_TOSS (0<<2)
-# define MAC_EN_CACHEABLE (1<<3)
-# define MAC_EN_RESET1 (1<<4)
-# define MAC_EN_RESET2 (1<<5)
-# define MAC_DMA_RESET (1<<6)
+# define MAC_EN_CLOCK_ENABLE (1 << 0)
+# define MAC_EN_RESET0 (1 << 1)
+# define MAC_EN_TOSS (0 << 2)
+# define MAC_EN_CACHEABLE (1 << 3)
+# define MAC_EN_RESET1 (1 << 4)
+# define MAC_EN_RESET2 (1 << 5)
+# define MAC_DMA_RESET (1 << 6)
/* Ethernet Controller DMA Channels */
-#define MAC0_TX_DMA_ADDR 0xB4004000
-#define MAC1_TX_DMA_ADDR 0xB4004200
+#define MAC0_TX_DMA_ADDR 0xB4004000
+#define MAC1_TX_DMA_ADDR 0xB4004200
/* offsets from MAC_TX_RING_ADDR address */
-#define MAC_TX_BUFF0_STATUS 0x0
-# define TX_FRAME_ABORTED (1<<0)
-# define TX_JAB_TIMEOUT (1<<1)
-# define TX_NO_CARRIER (1<<2)
-# define TX_LOSS_CARRIER (1<<3)
-# define TX_EXC_DEF (1<<4)
-# define TX_LATE_COLL_ABORT (1<<5)
-# define TX_EXC_COLL (1<<6)
-# define TX_UNDERRUN (1<<7)
-# define TX_DEFERRED (1<<8)
-# define TX_LATE_COLL (1<<9)
-# define TX_COLL_CNT_MASK (0xF<<10)
-# define TX_PKT_RETRY (1<<31)
-#define MAC_TX_BUFF0_ADDR 0x4
-# define TX_DMA_ENABLE (1<<0)
-# define TX_T_DONE (1<<1)
-# define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3)
-#define MAC_TX_BUFF0_LEN 0x8
-#define MAC_TX_BUFF1_STATUS 0x10
-#define MAC_TX_BUFF1_ADDR 0x14
-#define MAC_TX_BUFF1_LEN 0x18
-#define MAC_TX_BUFF2_STATUS 0x20
-#define MAC_TX_BUFF2_ADDR 0x24
-#define MAC_TX_BUFF2_LEN 0x28
-#define MAC_TX_BUFF3_STATUS 0x30
-#define MAC_TX_BUFF3_ADDR 0x34
-#define MAC_TX_BUFF3_LEN 0x38
-
-#define MAC0_RX_DMA_ADDR 0xB4004100
-#define MAC1_RX_DMA_ADDR 0xB4004300
+#define MAC_TX_BUFF0_STATUS 0x0
+# define TX_FRAME_ABORTED (1 << 0)
+# define TX_JAB_TIMEOUT (1 << 1)
+# define TX_NO_CARRIER (1 << 2)
+# define TX_LOSS_CARRIER (1 << 3)
+# define TX_EXC_DEF (1 << 4)
+# define TX_LATE_COLL_ABORT (1 << 5)
+# define TX_EXC_COLL (1 << 6)
+# define TX_UNDERRUN (1 << 7)
+# define TX_DEFERRED (1 << 8)
+# define TX_LATE_COLL (1 << 9)
+# define TX_COLL_CNT_MASK (0xF << 10)
+# define TX_PKT_RETRY (1 << 31)
+#define MAC_TX_BUFF0_ADDR 0x4
+# define TX_DMA_ENABLE (1 << 0)
+# define TX_T_DONE (1 << 1)
+# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN 0x8
+#define MAC_TX_BUFF1_STATUS 0x10
+#define MAC_TX_BUFF1_ADDR 0x14
+#define MAC_TX_BUFF1_LEN 0x18
+#define MAC_TX_BUFF2_STATUS 0x20
+#define MAC_TX_BUFF2_ADDR 0x24
+#define MAC_TX_BUFF2_LEN 0x28
+#define MAC_TX_BUFF3_STATUS 0x30
+#define MAC_TX_BUFF3_ADDR 0x34
+#define MAC_TX_BUFF3_LEN 0x38
+
+#define MAC0_RX_DMA_ADDR 0xB4004100
+#define MAC1_RX_DMA_ADDR 0xB4004300
/* offsets from MAC_RX_RING_ADDR */
-#define MAC_RX_BUFF0_STATUS 0x0
-# define RX_FRAME_LEN_MASK 0x3fff
-# define RX_WDOG_TIMER (1<<14)
-# define RX_RUNT (1<<15)
-# define RX_OVERLEN (1<<16)
-# define RX_COLL (1<<17)
-# define RX_ETHER (1<<18)
-# define RX_MII_ERROR (1<<19)
-# define RX_DRIBBLING (1<<20)
-# define RX_CRC_ERROR (1<<21)
-# define RX_VLAN1 (1<<22)
-# define RX_VLAN2 (1<<23)
-# define RX_LEN_ERROR (1<<24)
-# define RX_CNTRL_FRAME (1<<25)
-# define RX_U_CNTRL_FRAME (1<<26)
-# define RX_MCAST_FRAME (1<<27)
-# define RX_BCAST_FRAME (1<<28)
-# define RX_FILTER_FAIL (1<<29)
-# define RX_PACKET_FILTER (1<<30)
-# define RX_MISSED_FRAME (1<<31)
+#define MAC_RX_BUFF0_STATUS 0x0
+# define RX_FRAME_LEN_MASK 0x3fff
+# define RX_WDOG_TIMER (1 << 14)
+# define RX_RUNT (1 << 15)
+# define RX_OVERLEN (1 << 16)
+# define RX_COLL (1 << 17)
+# define RX_ETHER (1 << 18)
+# define RX_MII_ERROR (1 << 19)
+# define RX_DRIBBLING (1 << 20)
+# define RX_CRC_ERROR (1 << 21)
+# define RX_VLAN1 (1 << 22)
+# define RX_VLAN2 (1 << 23)
+# define RX_LEN_ERROR (1 << 24)
+# define RX_CNTRL_FRAME (1 << 25)
+# define RX_U_CNTRL_FRAME (1 << 26)
+# define RX_MCAST_FRAME (1 << 27)
+# define RX_BCAST_FRAME (1 << 28)
+# define RX_FILTER_FAIL (1 << 29)
+# define RX_PACKET_FILTER (1 << 30)
+# define RX_MISSED_FRAME (1 << 31)
# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
- RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
- RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
-#define MAC_RX_BUFF0_ADDR 0x4
-# define RX_DMA_ENABLE (1<<0)
-# define RX_T_DONE (1<<1)
-# define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3)
-# define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0)
-#define MAC_RX_BUFF1_STATUS 0x10
-#define MAC_RX_BUFF1_ADDR 0x14
-#define MAC_RX_BUFF2_STATUS 0x20
-#define MAC_RX_BUFF2_ADDR 0x24
-#define MAC_RX_BUFF3_STATUS 0x30
-#define MAC_RX_BUFF3_ADDR 0x34
-
+ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR 0x4
+# define RX_DMA_ENABLE (1 << 0)
+# define RX_T_DONE (1 << 1)
+# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS 0x10
+#define MAC_RX_BUFF1_ADDR 0x14
+#define MAC_RX_BUFF2_STATUS 0x20
+#define MAC_RX_BUFF2_ADDR 0x24
+#define MAC_RX_BUFF3_STATUS 0x30
+#define MAC_RX_BUFF3_ADDR 0x34
/* UARTS 0-3 */
-#define UART_BASE UART0_ADDR
+#define UART_BASE UART0_ADDR
#ifdef CONFIG_SOC_AU1200
-#define UART_DEBUG_BASE UART1_ADDR
+#define UART_DEBUG_BASE UART1_ADDR
#else
-#define UART_DEBUG_BASE UART3_ADDR
+#define UART_DEBUG_BASE UART3_ADDR
#endif
#define UART_RX 0 /* Receive buffer */
#define UART_MSR_DCTS 0x01 /* Delta CTS */
#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
-
/* SSIO */
-#define SSI0_STATUS 0xB1600000
-# define SSI_STATUS_BF (1<<4)
-# define SSI_STATUS_OF (1<<3)
-# define SSI_STATUS_UF (1<<2)
-# define SSI_STATUS_D (1<<1)
-# define SSI_STATUS_B (1<<0)
-#define SSI0_INT 0xB1600004
-# define SSI_INT_OI (1<<3)
-# define SSI_INT_UI (1<<2)
-# define SSI_INT_DI (1<<1)
-#define SSI0_INT_ENABLE 0xB1600008
-# define SSI_INTE_OIE (1<<3)
-# define SSI_INTE_UIE (1<<2)
-# define SSI_INTE_DIE (1<<1)
-#define SSI0_CONFIG 0xB1600020
-# define SSI_CONFIG_AO (1<<24)
-# define SSI_CONFIG_DO (1<<23)
-# define SSI_CONFIG_ALEN_BIT 20
-# define SSI_CONFIG_ALEN_MASK (0x7<<20)
-# define SSI_CONFIG_DLEN_BIT 16
-# define SSI_CONFIG_DLEN_MASK (0x7<<16)
-# define SSI_CONFIG_DD (1<<11)
-# define SSI_CONFIG_AD (1<<10)
-# define SSI_CONFIG_BM_BIT 8
-# define SSI_CONFIG_BM_MASK (0x3<<8)
-# define SSI_CONFIG_CE (1<<7)
-# define SSI_CONFIG_DP (1<<6)
-# define SSI_CONFIG_DL (1<<5)
-# define SSI_CONFIG_EP (1<<4)
-#define SSI0_ADATA 0xB1600024
-# define SSI_AD_D (1<<24)
-# define SSI_AD_ADDR_BIT 16
-# define SSI_AD_ADDR_MASK (0xff<<16)
-# define SSI_AD_DATA_BIT 0
-# define SSI_AD_DATA_MASK (0xfff<<0)
-#define SSI0_CLKDIV 0xB1600028
-#define SSI0_CONTROL 0xB1600100
-# define SSI_CONTROL_CD (1<<1)
-# define SSI_CONTROL_E (1<<0)
+#define SSI0_STATUS 0xB1600000
+# define SSI_STATUS_BF (1 << 4)
+# define SSI_STATUS_OF (1 << 3)
+# define SSI_STATUS_UF (1 << 2)
+# define SSI_STATUS_D (1 << 1)
+# define SSI_STATUS_B (1 << 0)
+#define SSI0_INT 0xB1600004
+# define SSI_INT_OI (1 << 3)
+# define SSI_INT_UI (1 << 2)
+# define SSI_INT_DI (1 << 1)
+#define SSI0_INT_ENABLE 0xB1600008
+# define SSI_INTE_OIE (1 << 3)
+# define SSI_INTE_UIE (1 << 2)
+# define SSI_INTE_DIE (1 << 1)
+#define SSI0_CONFIG 0xB1600020
+# define SSI_CONFIG_AO (1 << 24)
+# define SSI_CONFIG_DO (1 << 23)
+# define SSI_CONFIG_ALEN_BIT 20
+# define SSI_CONFIG_ALEN_MASK (0x7 << 20)
+# define SSI_CONFIG_DLEN_BIT 16
+# define SSI_CONFIG_DLEN_MASK (0x7 << 16)
+# define SSI_CONFIG_DD (1 << 11)
+# define SSI_CONFIG_AD (1 << 10)
+# define SSI_CONFIG_BM_BIT 8
+# define SSI_CONFIG_BM_MASK (0x3 << 8)
+# define SSI_CONFIG_CE (1 << 7)
+# define SSI_CONFIG_DP (1 << 6)
+# define SSI_CONFIG_DL (1 << 5)
+# define SSI_CONFIG_EP (1 << 4)
+#define SSI0_ADATA 0xB1600024
+# define SSI_AD_D (1 << 24)
+# define SSI_AD_ADDR_BIT 16
+# define SSI_AD_ADDR_MASK (0xff << 16)
+# define SSI_AD_DATA_BIT 0
+# define SSI_AD_DATA_MASK (0xfff << 0)
+#define SSI0_CLKDIV 0xB1600028
+#define SSI0_CONTROL 0xB1600100
+# define SSI_CONTROL_CD (1 << 1)
+# define SSI_CONTROL_E (1 << 0)
/* SSI1 */
-#define SSI1_STATUS 0xB1680000
-#define SSI1_INT 0xB1680004
-#define SSI1_INT_ENABLE 0xB1680008
-#define SSI1_CONFIG 0xB1680020
-#define SSI1_ADATA 0xB1680024
-#define SSI1_CLKDIV 0xB1680028
-#define SSI1_ENABLE 0xB1680100
+#define SSI1_STATUS 0xB1680000
+#define SSI1_INT 0xB1680004
+#define SSI1_INT_ENABLE 0xB1680008
+#define SSI1_CONFIG 0xB1680020
+#define SSI1_ADATA 0xB1680024
+#define SSI1_CLKDIV 0xB1680028
+#define SSI1_ENABLE 0xB1680100
/*
* Register content definitions
*/
-#define SSI_STATUS_BF (1<<4)
-#define SSI_STATUS_OF (1<<3)
-#define SSI_STATUS_UF (1<<2)
-#define SSI_STATUS_D (1<<1)
-#define SSI_STATUS_B (1<<0)
+#define SSI_STATUS_BF (1 << 4)
+#define SSI_STATUS_OF (1 << 3)
+#define SSI_STATUS_UF (1 << 2)
+#define SSI_STATUS_D (1 << 1)
+#define SSI_STATUS_B (1 << 0)
/* SSI_INT */
-#define SSI_INT_OI (1<<3)
-#define SSI_INT_UI (1<<2)
-#define SSI_INT_DI (1<<1)
+#define SSI_INT_OI (1 << 3)
+#define SSI_INT_UI (1 << 2)
+#define SSI_INT_DI (1 << 1)
/* SSI_INTEN */
-#define SSI_INTEN_OIE (1<<3)
-#define SSI_INTEN_UIE (1<<2)
-#define SSI_INTEN_DIE (1<<1)
-
-#define SSI_CONFIG_AO (1<<24)
-#define SSI_CONFIG_DO (1<<23)
-#define SSI_CONFIG_ALEN (7<<20)
-#define SSI_CONFIG_DLEN (15<<16)
-#define SSI_CONFIG_DD (1<<11)
-#define SSI_CONFIG_AD (1<<10)
-#define SSI_CONFIG_BM (3<<8)
-#define SSI_CONFIG_CE (1<<7)
-#define SSI_CONFIG_DP (1<<6)
-#define SSI_CONFIG_DL (1<<5)
-#define SSI_CONFIG_EP (1<<4)
-#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20)
-#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16)
-#define SSI_CONFIG_BM_HI (0<<8)
-#define SSI_CONFIG_BM_LO (1<<8)
-#define SSI_CONFIG_BM_CY (2<<8)
-
-#define SSI_ADATA_D (1<<24)
-#define SSI_ADATA_ADDR (0xFF<<16)
-#define SSI_ADATA_DATA (0x0FFF)
-#define SSI_ADATA_ADDR_N(N) (N<<16)
-
-#define SSI_ENABLE_CD (1<<1)
-#define SSI_ENABLE_E (1<<0)
-
+#define SSI_INTEN_OIE (1 << 3)
+#define SSI_INTEN_UIE (1 << 2)
+#define SSI_INTEN_DIE (1 << 1)
+
+#define SSI_CONFIG_AO (1 << 24)
+#define SSI_CONFIG_DO (1 << 23)
+#define SSI_CONFIG_ALEN (7 << 20)
+#define SSI_CONFIG_DLEN (15 << 16)
+#define SSI_CONFIG_DD (1 << 11)
+#define SSI_CONFIG_AD (1 << 10)
+#define SSI_CONFIG_BM (3 << 8)
+#define SSI_CONFIG_CE (1 << 7)
+#define SSI_CONFIG_DP (1 << 6)
+#define SSI_CONFIG_DL (1 << 5)
+#define SSI_CONFIG_EP (1 << 4)
+#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20)
+#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16)
+#define SSI_CONFIG_BM_HI (0 << 8)
+#define SSI_CONFIG_BM_LO (1 << 8)
+#define SSI_CONFIG_BM_CY (2 << 8)
+
+#define SSI_ADATA_D (1 << 24)
+#define SSI_ADATA_ADDR (0xFF << 16)
+#define SSI_ADATA_DATA 0x0FFF
+#define SSI_ADATA_ADDR_N(N) (N << 16)
+
+#define SSI_ENABLE_CD (1 << 1)
+#define SSI_ENABLE_E (1 << 0)
/* IrDA Controller */
-#define IRDA_BASE 0xB0300000
-#define IR_RING_PTR_STATUS (IRDA_BASE+0x00)
-#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04)
-#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08)
-#define IR_RING_SIZE (IRDA_BASE+0x0C)
-#define IR_RING_PROMPT (IRDA_BASE+0x10)
-#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14)
-#define IR_INT_CLEAR (IRDA_BASE+0x18)
-#define IR_CONFIG_1 (IRDA_BASE+0x20)
-# define IR_RX_INVERT_LED (1<<0)
-# define IR_TX_INVERT_LED (1<<1)
-# define IR_ST (1<<2)
-# define IR_SF (1<<3)
-# define IR_SIR (1<<4)
-# define IR_MIR (1<<5)
-# define IR_FIR (1<<6)
-# define IR_16CRC (1<<7)
-# define IR_TD (1<<8)
-# define IR_RX_ALL (1<<9)
-# define IR_DMA_ENABLE (1<<10)
-# define IR_RX_ENABLE (1<<11)
-# define IR_TX_ENABLE (1<<12)
-# define IR_LOOPBACK (1<<14)
-# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
- IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
-#define IR_SIR_FLAGS (IRDA_BASE+0x24)
-#define IR_ENABLE (IRDA_BASE+0x28)
-# define IR_RX_STATUS (1<<9)
-# define IR_TX_STATUS (1<<10)
-#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C)
-#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30)
-#define IR_MAX_PKT_LEN (IRDA_BASE+0x34)
-#define IR_RX_BYTE_CNT (IRDA_BASE+0x38)
-#define IR_CONFIG_2 (IRDA_BASE+0x3C)
-# define IR_MODE_INV (1<<0)
-# define IR_ONE_PIN (1<<1)
-#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40)
+#define IRDA_BASE 0xB0300000
+#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00)
+#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04)
+#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08)
+#define IR_RING_SIZE (IRDA_BASE + 0x0C)
+#define IR_RING_PROMPT (IRDA_BASE + 0x10)
+#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14)
+#define IR_INT_CLEAR (IRDA_BASE + 0x18)
+#define IR_CONFIG_1 (IRDA_BASE + 0x20)
+# define IR_RX_INVERT_LED (1 << 0)
+# define IR_TX_INVERT_LED (1 << 1)
+# define IR_ST (1 << 2)
+# define IR_SF (1 << 3)
+# define IR_SIR (1 << 4)
+# define IR_MIR (1 << 5)
+# define IR_FIR (1 << 6)
+# define IR_16CRC (1 << 7)
+# define IR_TD (1 << 8)
+# define IR_RX_ALL (1 << 9)
+# define IR_DMA_ENABLE (1 << 10)
+# define IR_RX_ENABLE (1 << 11)
+# define IR_TX_ENABLE (1 << 12)
+# define IR_LOOPBACK (1 << 14)
+# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
+ IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
+#define IR_SIR_FLAGS (IRDA_BASE + 0x24)
+#define IR_ENABLE (IRDA_BASE + 0x28)
+# define IR_RX_STATUS (1 << 9)
+# define IR_TX_STATUS (1 << 10)
+#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C)
+#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30)
+#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34)
+#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38)
+#define IR_CONFIG_2 (IRDA_BASE + 0x3C)
+# define IR_MODE_INV (1 << 0)
+# define IR_ONE_PIN (1 << 1)
+#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40)
/* GPIO */
-#define SYS_PINFUNC 0xB190002C
-# define SYS_PF_USB (1<<15) /* 2nd USB device/host */
-# define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */
-# define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */
-# define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */
-# define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */
-# define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */
-# define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */
-# define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */
-# define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */
-# define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */
-# define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */
-# define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */
-# define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */
-# define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */
-# define SYS_PF_A97 (1<<1) /* AC97/SSL1 */
-# define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */
-
-/* Au1100 Only */
-# define SYS_PF_PC (1<<18) /* PCMCIA/GPIO[207:204] */
-# define SYS_PF_LCD (1<<17) /* extern lcd/GPIO[203:200] */
-# define SYS_PF_CS (1<<16) /* EXTCLK0/32khz to gpio2 */
-# define SYS_PF_EX0 (1<<9) /* gpio2/clock */
-
-/* Au1550 Only. Redefines lots of pins */
-# define SYS_PF_PSC2_MASK (7 << 17)
-# define SYS_PF_PSC2_AC97 (0)
-# define SYS_PF_PSC2_SPI (0)
-# define SYS_PF_PSC2_I2S (1 << 17)
-# define SYS_PF_PSC2_SMBUS (3 << 17)
-# define SYS_PF_PSC2_GPIO (7 << 17)
-# define SYS_PF_PSC3_MASK (7 << 20)
-# define SYS_PF_PSC3_AC97 (0)
-# define SYS_PF_PSC3_SPI (0)
-# define SYS_PF_PSC3_I2S (1 << 20)
-# define SYS_PF_PSC3_SMBUS (3 << 20)
-# define SYS_PF_PSC3_GPIO (7 << 20)
-# define SYS_PF_PSC1_S1 (1 << 1)
-# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
-
-/* Au1200 Only */
+#define SYS_PINFUNC 0xB190002C
+# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
+# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
+# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
+# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
+# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
+# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
+# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
+# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
+# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
+# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
+# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
+# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
+# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
+# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
+# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
+# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
+# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
+# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
+# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
+
+/* Au1550 only. Redefines lots of pins */
+# define SYS_PF_PSC2_MASK (7 << 17)
+# define SYS_PF_PSC2_AC97 0
+# define SYS_PF_PSC2_SPI 0
+# define SYS_PF_PSC2_I2S (1 << 17)
+# define SYS_PF_PSC2_SMBUS (3 << 17)
+# define SYS_PF_PSC2_GPIO (7 << 17)
+# define SYS_PF_PSC3_MASK (7 << 20)
+# define SYS_PF_PSC3_AC97 0
+# define SYS_PF_PSC3_SPI 0
+# define SYS_PF_PSC3_I2S (1 << 20)
+# define SYS_PF_PSC3_SMBUS (3 << 20)
+# define SYS_PF_PSC3_GPIO (7 << 20)
+# define SYS_PF_PSC1_S1 (1 << 1)
+# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+
+/* Au1200 only */
#ifdef CONFIG_SOC_AU1200
-#define SYS_PINFUNC_DMA (1<<31)
-#define SYS_PINFUNC_S0A (1<<30)
-#define SYS_PINFUNC_S1A (1<<29)
-#define SYS_PINFUNC_LP0 (1<<28)
-#define SYS_PINFUNC_LP1 (1<<27)
-#define SYS_PINFUNC_LD16 (1<<26)
-#define SYS_PINFUNC_LD8 (1<<25)
-#define SYS_PINFUNC_LD1 (1<<24)
-#define SYS_PINFUNC_LD0 (1<<23)
-#define SYS_PINFUNC_P1A (3<<21)
-#define SYS_PINFUNC_P1B (1<<20)
-#define SYS_PINFUNC_FS3 (1<<19)
-#define SYS_PINFUNC_P0A (3<<17)
-#define SYS_PINFUNC_CS (1<<16)
-#define SYS_PINFUNC_CIM (1<<15)
-#define SYS_PINFUNC_P1C (1<<14)
-#define SYS_PINFUNC_U1T (1<<12)
-#define SYS_PINFUNC_U1R (1<<11)
-#define SYS_PINFUNC_EX1 (1<<10)
-#define SYS_PINFUNC_EX0 (1<<9)
-#define SYS_PINFUNC_U0R (1<<8)
-#define SYS_PINFUNC_MC (1<<7)
-#define SYS_PINFUNC_S0B (1<<6)
-#define SYS_PINFUNC_S0C (1<<5)
-#define SYS_PINFUNC_P0B (1<<4)
-#define SYS_PINFUNC_U0T (1<<3)
-#define SYS_PINFUNC_S1B (1<<2)
+#define SYS_PINFUNC_DMA (1 << 31)
+#define SYS_PINFUNC_S0A (1 << 30)
+#define SYS_PINFUNC_S1A (1 << 29)
+#define SYS_PINFUNC_LP0 (1 << 28)
+#define SYS_PINFUNC_LP1 (1 << 27)
+#define SYS_PINFUNC_LD16 (1 << 26)
+#define SYS_PINFUNC_LD8 (1 << 25)
+#define SYS_PINFUNC_LD1 (1 << 24)
+#define SYS_PINFUNC_LD0 (1 << 23)
+#define SYS_PINFUNC_P1A (3 << 21)
+#define SYS_PINFUNC_P1B (1 << 20)
+#define SYS_PINFUNC_FS3 (1 << 19)
+#define SYS_PINFUNC_P0A (3 << 17)
+#define SYS_PINFUNC_CS (1 << 16)
+#define SYS_PINFUNC_CIM (1 << 15)
+#define SYS_PINFUNC_P1C (1 << 14)
+#define SYS_PINFUNC_U1T (1 << 12)
+#define SYS_PINFUNC_U1R (1 << 11)
+#define SYS_PINFUNC_EX1 (1 << 10)
+#define SYS_PINFUNC_EX0 (1 << 9)
+#define SYS_PINFUNC_U0R (1 << 8)
+#define SYS_PINFUNC_MC (1 << 7)
+#define SYS_PINFUNC_S0B (1 << 6)
+#define SYS_PINFUNC_S0C (1 << 5)
+#define SYS_PINFUNC_P0B (1 << 4)
+#define SYS_PINFUNC_U0T (1 << 3)
+#define SYS_PINFUNC_S1B (1 << 2)
#endif
-#define SYS_TRIOUTRD 0xB1900100
-#define SYS_TRIOUTCLR 0xB1900100
-#define SYS_OUTPUTRD 0xB1900108
-#define SYS_OUTPUTSET 0xB1900108
-#define SYS_OUTPUTCLR 0xB190010C
-#define SYS_PINSTATERD 0xB1900110
-#define SYS_PININPUTEN 0xB1900110
+#define SYS_TRIOUTRD 0xB1900100
+#define SYS_TRIOUTCLR 0xB1900100
+#define SYS_OUTPUTRD 0xB1900108
+#define SYS_OUTPUTSET 0xB1900108
+#define SYS_OUTPUTCLR 0xB190010C
+#define SYS_PINSTATERD 0xB1900110
+#define SYS_PININPUTEN 0xB1900110
/* GPIO2, Au1500, Au1550 only */
-#define GPIO2_BASE 0xB1700000
-#define GPIO2_DIR (GPIO2_BASE + 0)
-#define GPIO2_OUTPUT (GPIO2_BASE + 8)
-#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
-#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
-#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
+#define GPIO2_BASE 0xB1700000
+#define GPIO2_DIR (GPIO2_BASE + 0)
+#define GPIO2_OUTPUT (GPIO2_BASE + 8)
+#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
+#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
+#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
/* Power Management */
-#define SYS_SCRATCH0 0xB1900018
-#define SYS_SCRATCH1 0xB190001C
-#define SYS_WAKEMSK 0xB1900034
-#define SYS_ENDIAN 0xB1900038
-#define SYS_POWERCTRL 0xB190003C
-#define SYS_WAKESRC 0xB190005C
-#define SYS_SLPPWR 0xB1900078
-#define SYS_SLEEP 0xB190007C
+#define SYS_SCRATCH0 0xB1900018
+#define SYS_SCRATCH1 0xB190001C
+#define SYS_WAKEMSK 0xB1900034
+#define SYS_ENDIAN 0xB1900038
+#define SYS_POWERCTRL 0xB190003C
+#define SYS_WAKESRC 0xB190005C
+#define SYS_SLPPWR 0xB1900078
+#define SYS_SLEEP 0xB190007C
/* Clock Controller */
-#define SYS_FREQCTRL0 0xB1900020
-# define SYS_FC_FRDIV2_BIT 22
-# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
-# define SYS_FC_FE2 (1<<21)
-# define SYS_FC_FS2 (1<<20)
-# define SYS_FC_FRDIV1_BIT 12
-# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
-# define SYS_FC_FE1 (1<<11)
-# define SYS_FC_FS1 (1<<10)
-# define SYS_FC_FRDIV0_BIT 2
-# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
-# define SYS_FC_FE0 (1<<1)
-# define SYS_FC_FS0 (1<<0)
-#define SYS_FREQCTRL1 0xB1900024
-# define SYS_FC_FRDIV5_BIT 22
-# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
-# define SYS_FC_FE5 (1<<21)
-# define SYS_FC_FS5 (1<<20)
-# define SYS_FC_FRDIV4_BIT 12
-# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
-# define SYS_FC_FE4 (1<<11)
-# define SYS_FC_FS4 (1<<10)
-# define SYS_FC_FRDIV3_BIT 2
-# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
-# define SYS_FC_FE3 (1<<1)
-# define SYS_FC_FS3 (1<<0)
-#define SYS_CLKSRC 0xB1900028
-# define SYS_CS_ME1_BIT 27
-# define SYS_CS_ME1_MASK (0x7<<SYS_CS_ME1_BIT)
-# define SYS_CS_DE1 (1<<26)
-# define SYS_CS_CE1 (1<<25)
-# define SYS_CS_ME0_BIT 22
-# define SYS_CS_ME0_MASK (0x7<<SYS_CS_ME0_BIT)
-# define SYS_CS_DE0 (1<<21)
-# define SYS_CS_CE0 (1<<20)
-# define SYS_CS_MI2_BIT 17
-# define SYS_CS_MI2_MASK (0x7<<SYS_CS_MI2_BIT)
-# define SYS_CS_DI2 (1<<16)
-# define SYS_CS_CI2 (1<<15)
+#define SYS_FREQCTRL0 0xB1900020
+# define SYS_FC_FRDIV2_BIT 22
+# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
+# define SYS_FC_FE2 (1 << 21)
+# define SYS_FC_FS2 (1 << 20)
+# define SYS_FC_FRDIV1_BIT 12
+# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
+# define SYS_FC_FE1 (1 << 11)
+# define SYS_FC_FS1 (1 << 10)
+# define SYS_FC_FRDIV0_BIT 2
+# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
+# define SYS_FC_FE0 (1 << 1)
+# define SYS_FC_FS0 (1 << 0)
+#define SYS_FREQCTRL1 0xB1900024
+# define SYS_FC_FRDIV5_BIT 22
+# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
+# define SYS_FC_FE5 (1 << 21)
+# define SYS_FC_FS5 (1 << 20)
+# define SYS_FC_FRDIV4_BIT 12
+# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
+# define SYS_FC_FE4 (1 << 11)
+# define SYS_FC_FS4 (1 << 10)
+# define SYS_FC_FRDIV3_BIT 2
+# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
+# define SYS_FC_FE3 (1 << 1)
+# define SYS_FC_FS3 (1 << 0)
+#define SYS_CLKSRC 0xB1900028
+# define SYS_CS_ME1_BIT 27
+# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT)
+# define SYS_CS_DE1 (1 << 26)
+# define SYS_CS_CE1 (1 << 25)
+# define SYS_CS_ME0_BIT 22
+# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT)
+# define SYS_CS_DE0 (1 << 21)
+# define SYS_CS_CE0 (1 << 20)
+# define SYS_CS_MI2_BIT 17
+# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
+# define SYS_CS_DI2 (1 << 16)
+# define SYS_CS_CI2 (1 << 15)
#ifdef CONFIG_SOC_AU1100
-# define SYS_CS_ML_BIT 7
-# define SYS_CS_ML_MASK (0x7<<SYS_CS_ML_BIT)
-# define SYS_CS_DL (1<<6)
-# define SYS_CS_CL (1<<5)
+# define SYS_CS_ML_BIT 7
+# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
+# define SYS_CS_DL (1 << 6)
+# define SYS_CS_CL (1 << 5)
#else
-# define SYS_CS_MUH_BIT 12
-# define SYS_CS_MUH_MASK (0x7<<SYS_CS_MUH_BIT)
-# define SYS_CS_DUH (1<<11)
-# define SYS_CS_CUH (1<<10)
-# define SYS_CS_MUD_BIT 7
-# define SYS_CS_MUD_MASK (0x7<<SYS_CS_MUD_BIT)
-# define SYS_CS_DUD (1<<6)
-# define SYS_CS_CUD (1<<5)
+# define SYS_CS_MUH_BIT 12
+# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
+# define SYS_CS_DUH (1 << 11)
+# define SYS_CS_CUH (1 << 10)
+# define SYS_CS_MUD_BIT 7
+# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
+# define SYS_CS_DUD (1 << 6)
+# define SYS_CS_CUD (1 << 5)
#endif
-# define SYS_CS_MIR_BIT 2
-# define SYS_CS_MIR_MASK (0x7<<SYS_CS_MIR_BIT)
-# define SYS_CS_DIR (1<<1)
-# define SYS_CS_CIR (1<<0)
-
-# define SYS_CS_MUX_AUX 0x1
-# define SYS_CS_MUX_FQ0 0x2
-# define SYS_CS_MUX_FQ1 0x3
-# define SYS_CS_MUX_FQ2 0x4
-# define SYS_CS_MUX_FQ3 0x5
-# define SYS_CS_MUX_FQ4 0x6
-# define SYS_CS_MUX_FQ5 0x7
-#define SYS_CPUPLL 0xB1900060
-#define SYS_AUXPLL 0xB1900064
+# define SYS_CS_MIR_BIT 2
+# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
+# define SYS_CS_DIR (1 << 1)
+# define SYS_CS_CIR (1 << 0)
+
+# define SYS_CS_MUX_AUX 0x1
+# define SYS_CS_MUX_FQ0 0x2
+# define SYS_CS_MUX_FQ1 0x3
+# define SYS_CS_MUX_FQ2 0x4
+# define SYS_CS_MUX_FQ3 0x5
+# define SYS_CS_MUX_FQ4 0x6
+# define SYS_CS_MUX_FQ5 0x7
+#define SYS_CPUPLL 0xB1900060
+#define SYS_AUXPLL 0xB1900064
/* AC97 Controller */
-#define AC97C_CONFIG 0xB0000000
-# define AC97C_RECV_SLOTS_BIT 13
+#define AC97C_CONFIG 0xB0000000
+# define AC97C_RECV_SLOTS_BIT 13
# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
-# define AC97C_XMIT_SLOTS_BIT 3
+# define AC97C_XMIT_SLOTS_BIT 3
# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
-# define AC97C_SG (1<<2)
-# define AC97C_SYNC (1<<1)
-# define AC97C_RESET (1<<0)
-#define AC97C_STATUS 0xB0000004
-# define AC97C_XU (1<<11)
-# define AC97C_XO (1<<10)
-# define AC97C_RU (1<<9)
-# define AC97C_RO (1<<8)
-# define AC97C_READY (1<<7)
-# define AC97C_CP (1<<6)
-# define AC97C_TR (1<<5)
-# define AC97C_TE (1<<4)
-# define AC97C_TF (1<<3)
-# define AC97C_RR (1<<2)
-# define AC97C_RE (1<<1)
-# define AC97C_RF (1<<0)
-#define AC97C_DATA 0xB0000008
-#define AC97C_CMD 0xB000000C
-# define AC97C_WD_BIT 16
-# define AC97C_READ (1<<7)
-# define AC97C_INDEX_MASK 0x7f
-#define AC97C_CNTRL 0xB0000010
-# define AC97C_RS (1<<1)
-# define AC97C_CE (1<<0)
-
+# define AC97C_SG (1 << 2)
+# define AC97C_SYNC (1 << 1)
+# define AC97C_RESET (1 << 0)
+#define AC97C_STATUS 0xB0000004
+# define AC97C_XU (1 << 11)
+# define AC97C_XO (1 << 10)
+# define AC97C_RU (1 << 9)
+# define AC97C_RO (1 << 8)
+# define AC97C_READY (1 << 7)
+# define AC97C_CP (1 << 6)
+# define AC97C_TR (1 << 5)
+# define AC97C_TE (1 << 4)
+# define AC97C_TF (1 << 3)
+# define AC97C_RR (1 << 2)
+# define AC97C_RE (1 << 1)
+# define AC97C_RF (1 << 0)
+#define AC97C_DATA 0xB0000008
+#define AC97C_CMD 0xB000000C
+# define AC97C_WD_BIT 16
+# define AC97C_READ (1 << 7)
+# define AC97C_INDEX_MASK 0x7f
+#define AC97C_CNTRL 0xB0000010
+# define AC97C_RS (1 << 1)
+# define AC97C_CE (1 << 0)
/* Secure Digital (SD) Controller */
#define SD0_XMIT_FIFO 0xB0600000
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
-#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr
-#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
-#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
-# define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27))
-#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
-#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
-#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
-#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
+#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
+#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
+#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
+# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \
+ (1 << 25) | (1 << 26) | (1 << 27))
+#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
+#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
+#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
+#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
-#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
-#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
-#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
-#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
-#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
-#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
-#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
+#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
+#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
+#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
+#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
+#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
+#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
+#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
-#define Au1500_PCI_HDR 0xB4005100 // virtual, kseg0 addr
+#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */
-/* All of our structures, like pci resource, have 32 bit members.
+/*
+ * All of our structures, like PCI resource, have 32-bit members.
* Drivers are expected to do an ioremap on the PCI MEM resource, but it's
- * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch
+ * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch
* to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
- * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM
- * addresses. For PCI IO, it's simpler because we get to do the ioremap
+ * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
+ * addresses. For PCI I/O, it's simpler because we get to do the ioremap
* ourselves and then adjust the device's resources.
*/
-#define Au1500_EXT_CFG 0x600000000ULL
-#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
-#define Au1500_PCI_IO_START 0x500000000ULL
-#define Au1500_PCI_IO_END 0x5000FFFFFULL
-#define Au1500_PCI_MEM_START 0x440000000ULL
-#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
+#define Au1500_EXT_CFG 0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
+#define Au1500_PCI_IO_START 0x500000000ULL
+#define Au1500_PCI_IO_END 0x5000FFFFFULL
+#define Au1500_PCI_MEM_START 0x440000000ULL
+#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
#define PCI_IO_START 0x00001000
#define PCI_IO_END 0x000FFFFF
#define PCI_MEM_START 0x40000000
#define PCI_MEM_END 0x4FFFFFFF
-#define PCI_FIRST_DEVFN (0<<3)
-#define PCI_LAST_DEVFN (19<<3)
+#define PCI_FIRST_DEVFN (0 << 3)
+#define PCI_LAST_DEVFN (19 << 3)
-#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
#else /* Au1000 and Au1100 and Au1200 */
-/* don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
-#define PCI_IO_START 0
-#define PCI_IO_END 0
-#define PCI_MEM_START 0
-#define PCI_MEM_END 0
+#define PCI_IO_START 0
+#define PCI_IO_END 0
+#define PCI_MEM_START 0
+#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 0
+#define PCI_LAST_DEVFN 0
#endif
#ifndef _LANGUAGE_ASSEMBLY
-typedef volatile struct
-{
+typedef volatile struct {
/* 0x0000 */ u32 toytrim;
/* 0x0004 */ u32 toywrite;
/* 0x0008 */ u32 toymatch0;
/* 0x010C */ u32 outputclr;
/* 0x0110 */ u32 pinstaterd;
#define pininputen pinstaterd
-
} AU1X00_SYS;
-static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE;
+static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
#endif
-/* Processor information base on prid.
+
+/*
+ * Processor information based on PRID.
* Copied from PowerPC.
*/
#ifndef _LANGUAGE_ASSEMBLY
unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
};
-extern struct cpu_spec cpu_specs[];
-extern struct cpu_spec *cur_cpu_spec[];
+extern struct cpu_spec cpu_specs[];
+extern struct cpu_spec *cur_cpu_spec[];
#endif
#endif
-
/*
* BRIEF MODULE DESCRIPTION
- * Defines for using and allocating dma channels on the Alchemy
- * Au1000 mips processor.
+ * Defines for using and allocating DMA channels on the Alchemy
+ * Au1x00 MIPS processors.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#ifndef __ASM_AU1000_DMA_H
#define __ASM_AU1000_DMA_H
-#include <asm/io.h> /* need byte IO */
+#include <linux/io.h> /* need byte IO */
#include <linux/spinlock.h> /* And spinlocks */
#include <linux/delay.h>
#include <asm/system.h>
#define DMA_DAH_MASK (0x0f << 20)
#define DMA_DID_BIT 16
#define DMA_DID_MASK (0x0f << DMA_DID_BIT)
-#define DMA_DS (1<<15)
-#define DMA_BE (1<<13)
-#define DMA_DR (1<<12)
-#define DMA_TS8 (1<<11)
+#define DMA_DS (1 << 15)
+#define DMA_BE (1 << 13)
+#define DMA_DR (1 << 12)
+#define DMA_TS8 (1 << 11)
#define DMA_DW_BIT 9
#define DMA_DW_MASK (0x03 << DMA_DW_BIT)
#define DMA_DW8 (0 << DMA_DW_BIT)
#define DMA_DW16 (1 << DMA_DW_BIT)
#define DMA_DW32 (2 << DMA_DW_BIT)
-#define DMA_NC (1<<8)
-#define DMA_IE (1<<7)
-#define DMA_HALT (1<<6)
-#define DMA_GO (1<<5)
-#define DMA_AB (1<<4)
-#define DMA_D1 (1<<3)
-#define DMA_BE1 (1<<2)
-#define DMA_D0 (1<<1)
-#define DMA_BE0 (1<<0)
-
-#define DMA_PERIPHERAL_ADDR 0x00000008
-#define DMA_BUFFER0_START 0x0000000C
-#define DMA_BUFFER1_START 0x00000014
-#define DMA_BUFFER0_COUNT 0x00000010
-#define DMA_BUFFER1_COUNT 0x00000018
-#define DMA_BAH_BIT 16
-#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
-#define DMA_COUNT_BIT 0
-#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
-
-/* DMA Device ID's follow */
+#define DMA_NC (1 << 8)
+#define DMA_IE (1 << 7)
+#define DMA_HALT (1 << 6)
+#define DMA_GO (1 << 5)
+#define DMA_AB (1 << 4)
+#define DMA_D1 (1 << 3)
+#define DMA_BE1 (1 << 2)
+#define DMA_D0 (1 << 1)
+#define DMA_BE0 (1 << 0)
+
+#define DMA_PERIPHERAL_ADDR 0x00000008
+#define DMA_BUFFER0_START 0x0000000C
+#define DMA_BUFFER1_START 0x00000014
+#define DMA_BUFFER0_COUNT 0x00000010
+#define DMA_BUFFER1_COUNT 0x00000018
+#define DMA_BAH_BIT 16
+#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT 0
+#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
+
+/* DMA Device IDs follow */
enum {
DMA_ID_UART0_TX = 0,
DMA_ID_UART0_RX,
};
struct dma_chan {
- int dev_id; // this channel is allocated if >=0, free otherwise
+ int dev_id; /* this channel is allocated if >= 0, */
+ /* free otherwise */
unsigned int io;
const char *dev_str;
int irq;
extern void dump_au1000_dma_channel(unsigned int dmanr);
extern spinlock_t au1000_dma_spin_lock;
-
-static __inline__ struct dma_chan *get_dma_chan(unsigned int dmanr)
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
{
- if (dmanr >= NUM_AU1000_DMA_CHANNELS
- || au1000_dma_table[dmanr].dev_id < 0)
+ if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+ au1000_dma_table[dmanr].dev_id < 0)
return NULL;
return &au1000_dma_table[dmanr];
}
-static __inline__ unsigned long claim_dma_lock(void)
+static inline unsigned long claim_dma_lock(void)
{
unsigned long flags;
+
spin_lock_irqsave(&au1000_dma_spin_lock, flags);
return flags;
}
-static __inline__ void release_dma_lock(unsigned long flags)
+static inline void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
}
/*
* Set the DMA buffer enable bits in the mode register.
*/
-static __inline__ void enable_dma_buffer0(unsigned int dmanr)
+static inline void enable_dma_buffer0(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
}
-static __inline__ void enable_dma_buffer1(unsigned int dmanr)
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
}
-static __inline__ void enable_dma_buffers(unsigned int dmanr)
+static inline void enable_dma_buffers(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
}
-static __inline__ void start_dma(unsigned int dmanr)
+static inline void start_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
-
au_writel(DMA_GO, chan->io + DMA_MODE_SET);
}
#define DMA_HALT_POLL 0x5000
-static __inline__ void halt_dma(unsigned int dmanr)
+static inline void halt_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
int i;
+
if (!chan)
return;
-
au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
- // poll the halt bit
+
+ /* Poll the halt bit */
for (i = 0; i < DMA_HALT_POLL; i++)
if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
break;
printk(KERN_INFO "halt_dma: HALT poll expired!\n");
}
-
-static __inline__ void disable_dma(unsigned int dmanr)
+static inline void disable_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
halt_dma(dmanr);
- // now we can disable the buffers
+ /* Now we can disable the buffers */
au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
}
-static __inline__ int dma_halted(unsigned int dmanr)
+static inline int dma_halted(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 1;
return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
}
-/* initialize a DMA channel */
-static __inline__ void init_dma(unsigned int dmanr)
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
u32 mode;
+
if (!chan)
return;
disable_dma(dmanr);
- // set device FIFO address
- au_writel(CPHYSADDR(chan->fifo_addr),
- chan->io + DMA_PERIPHERAL_ADDR);
+ /* Set device FIFO address */
+ au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
if (chan->irq)
mode |= DMA_IE;
au_writel(~mode, chan->io + DMA_MODE_CLEAR);
- au_writel(mode, chan->io + DMA_MODE_SET);
+ au_writel(mode, chan->io + DMA_MODE_SET);
}
/*
- * set mode for a specific DMA channel
+ * Set mode for a specific DMA channel
*/
-static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode)
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
/*
chan->mode |= mode;
}
-static __inline__ unsigned int get_dma_mode(unsigned int dmanr)
+static inline unsigned int get_dma_mode(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
return chan->mode;
}
-static __inline__ int get_dma_active_buffer(unsigned int dmanr)
+static inline int get_dma_active_buffer(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return -1;
return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
}
-
/*
- * set the device FIFO address for a specific DMA channel - only
+ * Set the device FIFO address for a specific DMA channel - only
* applicable to GPO4 and GPO5. All the other devices have fixed
* FIFO addresses.
*/
-static __inline__ void set_dma_fifo_addr(unsigned int dmanr,
- unsigned int a)
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
- if (chan->mode & DMA_DS) /* second bank of device ids */
+ if (chan->mode & DMA_DS) /* second bank of device IDs */
return;
if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
/*
* Clear the DMA buffer done bits in the mode register.
*/
-static __inline__ void clear_dma_done0(unsigned int dmanr)
+static inline void clear_dma_done0(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
}
-static __inline__ void clear_dma_done1(unsigned int dmanr)
+
+static inline void clear_dma_done1(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
/*
* This does nothing - not applicable to Au1000 DMA.
*/
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
{
}
/*
* Set Buffer 0 transfer address for specific DMA channel.
*/
-static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a)
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(a, chan->io + DMA_BUFFER0_START);
/*
* Set Buffer 1 transfer address for specific DMA channel.
*/
-static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a)
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(a, chan->io + DMA_BUFFER1_START);
/*
* Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count0(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
/*
* Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count1(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
/*
* Set both buffer transfer sizes (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
* Returns which buffer has its done bit set in the mode register.
* Returns -1 if neither or both done bits set.
*/
-static __inline__ unsigned int get_dma_buffer_done(unsigned int dmanr)
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
-
- return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+ return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
}
/*
* Returns the DMA channel's Buffer Done IRQ number.
*/
-static __inline__ int get_dma_done_irq(unsigned int dmanr)
+static inline int get_dma_done_irq(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return -1;
-
return chan->irq;
}
/*
* Get DMA residue count. Returns the number of _bytes_ left to transfer.
*/
-static __inline__ int get_dma_residue(unsigned int dmanr)
+static inline int get_dma_residue(unsigned int dmanr)
{
int curBufCntReg, count;
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
}
#endif /* __ASM_AU1000_DMA_H */
-
* FILE NAME au1000_gpio.h
*
* BRIEF MODULE DESCRIPTION
- * API to Alchemy Au1000 GPIO device.
+ * API to Alchemy Au1xx0 GPIO device.
*
* Author: MontaVista Software, Inc. <source@mvista.com>
- * Steve Longerbeam <stevel@mvista.com>
+ * Steve Longerbeam
*
- * Copyright 2001 MontaVista Software Inc.
+ * Copyright 2001, 2008 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#define AU1000GPIO_IOC_MAGIC 'A'
-#define AU1000GPIO_IN _IOR (AU1000GPIO_IOC_MAGIC, 0, int)
-#define AU1000GPIO_SET _IOW (AU1000GPIO_IOC_MAGIC, 1, int)
-#define AU1000GPIO_CLEAR _IOW (AU1000GPIO_IOC_MAGIC, 2, int)
-#define AU1000GPIO_OUT _IOW (AU1000GPIO_IOC_MAGIC, 3, int)
-#define AU1000GPIO_TRISTATE _IOW (AU1000GPIO_IOC_MAGIC, 4, int)
-#define AU1000GPIO_AVAIL_MASK _IOR (AU1000GPIO_IOC_MAGIC, 5, int)
+#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int)
+#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int)
+#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int)
+#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int)
+#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int)
+#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int)
#ifdef __KERNEL__
extern u32 get_au1000_avail_gpio_mask(void);
/*
- * au1550_spi.h - au1550 psc spi controller driver - platform data struct
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
*/
#ifndef _AU1550_SPI_H_
#ifndef _AU1XXX_H_
#define _AU1XXX_H_
-
#include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+ defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
#include <asm/mach-db1x00/db1x00.h>
#elif defined(CONFIG_MIPS_PB1550)
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* Specifics for the Au1xxx Descriptor-Based DMA Controllers, first
- * seen in the AU1550 part.
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
*/
#ifndef _AU1000_DBDMA_H_
#define _AU1000_DBDMA_H_
-
#ifndef _LANGUAGE_ASSEMBLY
-/* The DMA base addresses.
- * The Channels are every 256 bytes (0x0100) from the channel 0 base.
+/*
+ * The DMA base addresses.
+ * The channels are every 256 bytes (0x0100) from the channel 0 base.
* Interrupt status/enable is bits 15:0 for channels 15 to zero.
*/
#define DDMA_GLOBAL_BASE 0xb4003000
u32 ddma_inten;
} dbdma_global_t;
-/* General Configuration.
-*/
+/* General Configuration. */
#define DDMA_CONFIG_AF (1 << 2)
#define DDMA_CONFIG_AH (1 << 1)
#define DDMA_CONFIG_AL (1 << 0)
#define DDMA_THROTTLE_EN (1 << 31)
-/* The structure of a DMA Channel.
-*/
+/* The structure of a DMA Channel. */
typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
u32 ddma_irq; /* If bit 0 set, interrupt pending */
u32 ddma_stat; /* See below */
u32 ddma_bytecnt; /* Byte count, valid only when chan idle */
- /* Remainder, up to the 256 byte boundary, is reserved.
- */
+ /* Remainder, up to the 256 byte boundary, is reserved. */
} au1x_dma_chan_t;
#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */
#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */
#define DDMA_CFG_EN (1 << 0) /* Channel enable */
-/* Always set when descriptor processing done, regardless of
+/*
+ * Always set when descriptor processing done, regardless of
* interrupt enable state. Reflected in global intstat, don't
* clear this until global intstat is read/used.
*/
#define DDMA_STAT_V (1 << 1) /* Descriptor valid */
#define DDMA_STAT_H (1 << 0) /* Channel Halted */
-/* "Standard" DDMA Descriptor.
+/*
+ * "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
typedef volatile struct au1xxx_ddma_desc {
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
- /* First 32bytes are HW specific!!!
- Lets have some SW data following.. make sure its 32bytes
+ /*
+ * First 32 bytes are HW specific!!!
+ * Lets have some SW data following -- make sure it's 32 bytes.
*/
u32 sw_status;
u32 sw_context;
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
-#define SW_STATUS_INUSE (1<<0)
+#define SW_STATUS_INUSE (1 << 0)
-/* Command 0 device IDs.
-*/
+/* Command 0 device IDs. */
#ifdef CONFIG_SOC_AU1550
#define DSCR_CMD0_UART0_TX 0
#define DSCR_CMD0_UART0_RX 1
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
-/* THis macro is used to find/create custom device types */
-#define DSCR_DEV2CUSTOM_ID(x, d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
-#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF)
-
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+ ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF)
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
-/* Source/Destination transfer width.
-*/
+/* Source/Destination transfer width. */
#define DSCR_CMD0_BYTE 0
#define DSCR_CMD0_HALFWORD 1
#define DSCR_CMD0_WORD 2
#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18)
#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16)
-/* DDMA Descriptor Type.
-*/
+/* DDMA Descriptor Type. */
#define DSCR_CMD0_STANDARD 0
#define DSCR_CMD0_LITERAL 1
#define DSCR_CMD0_CMP_BRANCH 2
#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13)
-/* Status Instruction.
-*/
+/* Status Instruction. */
#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */
#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */
#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */
#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0)
-/* Descriptor Command 1
-*/
+/* Descriptor Command 1. */
#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */
#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */
#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */
#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */
-/* Flag description.
-*/
+/* Flag description. */
#define DSCR_CMD1_FL_MEM_STRIDE0 0
#define DSCR_CMD1_FL_MEM_STRIDE1 1
#define DSCR_CMD1_FL_MEM_STRIDE2 2
#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22)
-/* Source1, 1-dimensional stride.
-*/
+/* Source1, 1-dimensional stride. */
#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */
#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */
#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */
#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */
#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0)
-/* Dest1, 1-dimensional stride.
-*/
+/* Dest1, 1-dimensional stride. */
#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */
#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */
#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */
#define DSCR_SRC1_SAM(x) (((x) & 3) << 28)
#define DSCR_DEST1_DAM(x) (((x) & 3) << 28)
-/* The next descriptor pointer.
-*/
+/* The next descriptor pointer. */
#define DSCR_NXTPTR_MASK (0x07ffffff)
#define DSCR_NXTPTR(x) ((x) >> 5)
#define DSCR_GET_NXTPTR(x) ((x) << 5)
#define DSCR_NXTPTR_MS (1 << 27)
-/* The number of DBDMA channels.
-*/
+/* The number of DBDMA channels. */
#define NUM_DBDMA_CHANS 16
/*
- * Ddma API definitions
+ * DDMA API definitions
* FIXME: may not fit to this header file
*/
typedef struct dbdma_device_table {
- u32 dev_id;
- u32 dev_flags;
- u32 dev_tsize;
- u32 dev_devwidth;
- u32 dev_physaddr; /* If FIFO */
- u32 dev_intlevel;
- u32 dev_intpolarity;
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
} dbdev_tab_t;
au1x_ddma_desc_t *chan_desc_base;
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
void *chan_callparam;
- void (*chan_callback)(int, void *);
+ void (*chan_callback)(int, void *);
} chan_tab_t;
#define DEV_FLAGS_INUSE (1 << 0)
#define DEV_FLAGS_ANYUSE (1 << 1)
#define DEV_FLAGS_OUT (1 << 2)
#define DEV_FLAGS_IN (1 << 3)
-#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
#define DEV_FLAGS_SYNC (1 << 5)
-/* end Ddma API definitions */
+/* end DDMA API definitions */
-/* External functions for drivers to use.
-*/
-/* Use this to allocate a dbdma channel. The device ids are one of the
- * DSCR_CMD0 devices IDs, which is usually redefined to a more
- * meaningful name. The 'callback' is called during dma completion
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel. The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name. The 'callback' is called during DMA completion
* interrupt.
*/
extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
- void (*callback)(int, void *), void *callparam);
+ void (*callback)(int, void *),
+ void *callparam);
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
-/* Set the device width of a in/out fifo.
-*/
+/* Set the device width of an in/out FIFO. */
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
-/* Allocate a ring of descriptors for dbdma.
-*/
+/* Allocate a ring of descriptors for DBDMA. */
u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
-/* Put buffers on source/destination descriptors.
-*/
+/* Put buffers on source/destination descriptors. */
u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
-/* Get a buffer from the destination descriptor.
-*/
+/* Get a buffer from the destination descriptor. */
u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
void au1xxx_dbdma_stop(u32 chanid);
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
-u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
-u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
- Some compatibilty macros --
- Needed to make changes to API without breaking existing drivers
-*/
-#define au1xxx_dbdma_put_source(chanid, buf, nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
-#define put_source_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
-
-
-#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
-#define put_dest_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
+ * Some compatibilty macros -- needed to make changes to API
+ * without breaking existing drivers.
+ */
+#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
+
+#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
/*
* Flags for the put_source/put_dest functions.
*/
-#define DDMA_FLAGS_IE (1<<0)
-#define DDMA_FLAGS_NOIE (1<<1)
+#define DDMA_FLAGS_IE (1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */
*/
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- #define DMA_WAIT_TIMEOUT 100
- #define NUM_DESCRIPTORS PRD_ENTRIES
+#define DMA_WAIT_TIMEOUT 100
+#define NUM_DESCRIPTORS PRD_ENTRIES
#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
- #define NUM_DESCRIPTORS 2
+#define NUM_DESCRIPTORS 2
#endif
#ifndef AU1XXX_ATA_RQSIZE
- #define AU1XXX_ATA_RQSIZE 128
+#define AU1XXX_ATA_RQSIZE 128
#endif
/* Disable Burstable-Support for DBDMA */
#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
- #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
#ifdef CONFIG_PM
/*
-* This will enable the device to be powered up when write() or read()
-* is called. If this is not defined, the driver will return -EBUSY.
-*/
+ * This will enable the device to be powered up when write() or read()
+ * is called. If this is not defined, the driver will return -EBUSY.
+ */
#define WAKE_ON_ACCESS 1
-typedef struct
-{
- spinlock_t lock; /* Used to block on state transitions */
- au1xxx_power_dev_t *dev; /* Power Managers device structure */
- unsigned stopped; /* USed to signaling device is stopped */
+typedef struct {
+ spinlock_t lock; /* Used to block on state transitions */
+ au1xxx_power_dev_t *dev; /* Power Managers device structure */
+ unsigned stopped; /* Used to signal device is stopped */
} pm_state;
#endif
-
-typedef struct
-{
- u32 tx_dev_id, rx_dev_id, target_dev_id;
- u32 tx_chan, rx_chan;
- void *tx_desc_head, *rx_desc_head;
- ide_hwif_t *hwif;
+typedef struct {
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- ide_drive_t *drive;
- struct dbdma_cmd *dma_table_cpu;
- dma_addr_t dma_table_dma;
+ ide_drive_t *drive;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
#endif
int irq;
u32 regbase;
#ifdef CONFIG_PM
- pm_state pm;
+ pm_state pm;
#endif
} _auide_hwif;
-/*******************************************************************************
-* PIO Mode timing calculation : *
-* *
-* Static Bus Spec ATA Spec *
-* Tcsoe = t1 *
-* Toecs = t9 *
-* Twcs = t9 *
-* Tcsh = t2i | t2 *
-* Tcsoff = t2i | t2 *
-* Twp = t2 *
-* Tcsw = t1 *
-* Tpm = 0 *
-* Ta = t1+t2 *
-*******************************************************************************/
+/******************************************************************************/
+/* PIO Mode timing calculation : */
+/* */
+/* Static Bus Spec ATA Spec */
+/* Tcsoe = t1 */
+/* Toecs = t9 */
+/* Twcs = t9 */
+/* Tcsh = t2i | t2 */
+/* Tcsoff = t2i | t2 */
+/* Twp = t2 */
+/* Tcsw = t1 */
+/* Tpm = 0 */
+/* Ta = t1+t2 */
+/******************************************************************************/
-#define TCSOE_MASK (0x07<<29)
-#define TOECS_MASK (0x07<<26)
-#define TWCS_MASK (0x07<<28)
-#define TCSH_MASK (0x0F<<24)
-#define TCSOFF_MASK (0x07<<20)
-#define TWP_MASK (0x3F<<14)
-#define TCSW_MASK (0x0F<<10)
-#define TPM_MASK (0x0F<<6)
-#define TA_MASK (0x3F<<0)
-#define TS_MASK (1<<8)
+#define TCSOE_MASK (0x07 << 29)
+#define TOECS_MASK (0x07 << 26)
+#define TWCS_MASK (0x07 << 28)
+#define TCSH_MASK (0x0F << 24)
+#define TCSOFF_MASK (0x07 << 20)
+#define TWP_MASK (0x3F << 14)
+#define TCSW_MASK (0x0F << 10)
+#define TPM_MASK (0x0F << 6)
+#define TA_MASK (0x3F << 0)
+#define TS_MASK (1 << 8)
/* Timing parameters PIO mode 0 */
-#define SBC_IDE_PIO0_TCSOE (0x04<<29)
-#define SBC_IDE_PIO0_TOECS (0x01<<26)
-#define SBC_IDE_PIO0_TWCS (0x02<<28)
-#define SBC_IDE_PIO0_TCSH (0x08<<24)
-#define SBC_IDE_PIO0_TCSOFF (0x07<<20)
-#define SBC_IDE_PIO0_TWP (0x10<<14)
-#define SBC_IDE_PIO0_TCSW (0x04<<10)
-#define SBC_IDE_PIO0_TPM (0x0<<6)
-#define SBC_IDE_PIO0_TA (0x15<<0)
+#define SBC_IDE_PIO0_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO0_TOECS (0x01 << 26)
+#define SBC_IDE_PIO0_TWCS (0x02 << 28)
+#define SBC_IDE_PIO0_TCSH (0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO0_TWP (0x10 << 14)
+#define SBC_IDE_PIO0_TCSW (0x04 << 10)
+#define SBC_IDE_PIO0_TPM (0x00 << 6)
+#define SBC_IDE_PIO0_TA (0x15 << 0)
/* Timing parameters PIO mode 1 */
-#define SBC_IDE_PIO1_TCSOE (0x03<<29)
-#define SBC_IDE_PIO1_TOECS (0x01<<26)
-#define SBC_IDE_PIO1_TWCS (0x01<<28)
-#define SBC_IDE_PIO1_TCSH (0x06<<24)
-#define SBC_IDE_PIO1_TCSOFF (0x06<<20)
-#define SBC_IDE_PIO1_TWP (0x08<<14)
-#define SBC_IDE_PIO1_TCSW (0x03<<10)
-#define SBC_IDE_PIO1_TPM (0x00<<6)
-#define SBC_IDE_PIO1_TA (0x0B<<0)
+#define SBC_IDE_PIO1_TCSOE (0x03 << 29)
+#define SBC_IDE_PIO1_TOECS (0x01 << 26)
+#define SBC_IDE_PIO1_TWCS (0x01 << 28)
+#define SBC_IDE_PIO1_TCSH (0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF (0x06 << 20)
+#define SBC_IDE_PIO1_TWP (0x08 << 14)
+#define SBC_IDE_PIO1_TCSW (0x03 << 10)
+#define SBC_IDE_PIO1_TPM (0x00 << 6)
+#define SBC_IDE_PIO1_TA (0x0B << 0)
/* Timing parameters PIO mode 2 */
-#define SBC_IDE_PIO2_TCSOE (0x05<<29)
-#define SBC_IDE_PIO2_TOECS (0x01<<26)
-#define SBC_IDE_PIO2_TWCS (0x01<<28)
-#define SBC_IDE_PIO2_TCSH (0x07<<24)
-#define SBC_IDE_PIO2_TCSOFF (0x07<<20)
-#define SBC_IDE_PIO2_TWP (0x1F<<14)
-#define SBC_IDE_PIO2_TCSW (0x05<<10)
-#define SBC_IDE_PIO2_TPM (0x00<<6)
-#define SBC_IDE_PIO2_TA (0x22<<0)
+#define SBC_IDE_PIO2_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO2_TOECS (0x01 << 26)
+#define SBC_IDE_PIO2_TWCS (0x01 << 28)
+#define SBC_IDE_PIO2_TCSH (0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO2_TWP (0x1F << 14)
+#define SBC_IDE_PIO2_TCSW (0x05 << 10)
+#define SBC_IDE_PIO2_TPM (0x00 << 6)
+#define SBC_IDE_PIO2_TA (0x22 << 0)
/* Timing parameters PIO mode 3 */
-#define SBC_IDE_PIO3_TCSOE (0x05<<29)
-#define SBC_IDE_PIO3_TOECS (0x01<<26)
-#define SBC_IDE_PIO3_TWCS (0x01<<28)
-#define SBC_IDE_PIO3_TCSH (0x0D<<24)
-#define SBC_IDE_PIO3_TCSOFF (0x0D<<20)
-#define SBC_IDE_PIO3_TWP (0x15<<14)
-#define SBC_IDE_PIO3_TCSW (0x05<<10)
-#define SBC_IDE_PIO3_TPM (0x00<<6)
-#define SBC_IDE_PIO3_TA (0x1A<<0)
+#define SBC_IDE_PIO3_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO3_TOECS (0x01 << 26)
+#define SBC_IDE_PIO3_TWCS (0x01 << 28)
+#define SBC_IDE_PIO3_TCSH (0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D << 20)
+#define SBC_IDE_PIO3_TWP (0x15 << 14)
+#define SBC_IDE_PIO3_TCSW (0x05 << 10)
+#define SBC_IDE_PIO3_TPM (0x00 << 6)
+#define SBC_IDE_PIO3_TA (0x1A << 0)
/* Timing parameters PIO mode 4 */
-#define SBC_IDE_PIO4_TCSOE (0x04<<29)
-#define SBC_IDE_PIO4_TOECS (0x01<<26)
-#define SBC_IDE_PIO4_TWCS (0x01<<28)
-#define SBC_IDE_PIO4_TCSH (0x04<<24)
-#define SBC_IDE_PIO4_TCSOFF (0x04<<20)
-#define SBC_IDE_PIO4_TWP (0x0D<<14)
-#define SBC_IDE_PIO4_TCSW (0x03<<10)
-#define SBC_IDE_PIO4_TPM (0x00<<6)
-#define SBC_IDE_PIO4_TA (0x12<<0)
+#define SBC_IDE_PIO4_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO4_TOECS (0x01 << 26)
+#define SBC_IDE_PIO4_TWCS (0x01 << 28)
+#define SBC_IDE_PIO4_TCSH (0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF (0x04 << 20)
+#define SBC_IDE_PIO4_TWP (0x0D << 14)
+#define SBC_IDE_PIO4_TCSW (0x03 << 10)
+#define SBC_IDE_PIO4_TPM (0x00 << 6)
+#define SBC_IDE_PIO4_TA (0x12 << 0)
/* Timing parameters MDMA mode 0 */
-#define SBC_IDE_MDMA0_TCSOE (0x03<<29)
-#define SBC_IDE_MDMA0_TOECS (0x01<<26)
-#define SBC_IDE_MDMA0_TWCS (0x01<<28)
-#define SBC_IDE_MDMA0_TCSH (0x07<<24)
-#define SBC_IDE_MDMA0_TCSOFF (0x07<<20)
-#define SBC_IDE_MDMA0_TWP (0x0C<<14)
-#define SBC_IDE_MDMA0_TCSW (0x03<<10)
-#define SBC_IDE_MDMA0_TPM (0x00<<6)
-#define SBC_IDE_MDMA0_TA (0x0F<<0)
+#define SBC_IDE_MDMA0_TCSOE (0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH (0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20)
+#define SBC_IDE_MDMA0_TWP (0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW (0x03 << 10)
+#define SBC_IDE_MDMA0_TPM (0x00 << 6)
+#define SBC_IDE_MDMA0_TA (0x0F << 0)
/* Timing parameters MDMA mode 1 */
-#define SBC_IDE_MDMA1_TCSOE (0x05<<29)
-#define SBC_IDE_MDMA1_TOECS (0x01<<26)
-#define SBC_IDE_MDMA1_TWCS (0x01<<28)
-#define SBC_IDE_MDMA1_TCSH (0x05<<24)
-#define SBC_IDE_MDMA1_TCSOFF (0x05<<20)
-#define SBC_IDE_MDMA1_TWP (0x0F<<14)
-#define SBC_IDE_MDMA1_TCSW (0x05<<10)
-#define SBC_IDE_MDMA1_TPM (0x00<<6)
-#define SBC_IDE_MDMA1_TA (0x15<<0)
+#define SBC_IDE_MDMA1_TCSOE (0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH (0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20)
+#define SBC_IDE_MDMA1_TWP (0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW (0x05 << 10)
+#define SBC_IDE_MDMA1_TPM (0x00 << 6)
+#define SBC_IDE_MDMA1_TA (0x15 << 0)
/* Timing parameters MDMA mode 2 */
-#define SBC_IDE_MDMA2_TCSOE (0x04<<29)
-#define SBC_IDE_MDMA2_TOECS (0x01<<26)
-#define SBC_IDE_MDMA2_TWCS (0x01<<28)
-#define SBC_IDE_MDMA2_TCSH (0x04<<24)
-#define SBC_IDE_MDMA2_TCSOFF (0x04<<20)
-#define SBC_IDE_MDMA2_TWP (0x0D<<14)
-#define SBC_IDE_MDMA2_TCSW (0x04<<10)
-#define SBC_IDE_MDMA2_TPM (0x00<<6)
-#define SBC_IDE_MDMA2_TA (0x12<<0)
+#define SBC_IDE_MDMA2_TCSOE (0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH (0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20)
+#define SBC_IDE_MDMA2_TWP (0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW (0x04 << 10)
+#define SBC_IDE_MDMA2_TPM (0x00 << 6)
+#define SBC_IDE_MDMA2_TA (0x12 << 0)
#define SBC_IDE_TIMING(mode) \
- SBC_IDE_##mode##_TWCS | \
- SBC_IDE_##mode##_TCSH | \
- SBC_IDE_##mode##_TCSOFF | \
- SBC_IDE_##mode##_TWP | \
- SBC_IDE_##mode##_TCSW | \
- SBC_IDE_##mode##_TPM | \
- SBC_IDE_##mode##_TA
+ (SBC_IDE_##mode##_TWCS | \
+ SBC_IDE_##mode##_TCSH | \
+ SBC_IDE_##mode##_TCSOFF | \
+ SBC_IDE_##mode##_TWP | \
+ SBC_IDE_##mode##_TCSW | \
+ SBC_IDE_##mode##_TPM | \
+ SBC_IDE_##mode##_TA)
#ifndef _AU1000_PSC_H_
#define _AU1000_PSC_H_
-
/* The PSC base addresses. */
#ifdef CONFIG_SOC_AU1550
#define PSC0_BASE_ADDR 0xb1a00000
#define PSC1_BASE_ADDR 0xb1b00000
#endif
-/* The PSC select and control registers are common to
- * all protocols.
+/*
+ * The PSC select and control registers are common to all protocols.
*/
#define PSC_SEL_OFFSET 0x00000000
#define PSC_CTRL_OFFSET 0x00000004
#define PSC_SEL_CLK_SERCLK (2 << 4)
#define PSC_SEL_PS_MASK 0x00000007
-#define PSC_SEL_PS_DISABLED (0)
-#define PSC_SEL_PS_SPIMODE (2)
-#define PSC_SEL_PS_I2SMODE (3)
-#define PSC_SEL_PS_AC97MODE (4)
-#define PSC_SEL_PS_SMBUSMODE (5)
-
-#define PSC_CTRL_DISABLE (0)
-#define PSC_CTRL_SUSPEND (2)
-#define PSC_CTRL_ENABLE (3)
-
-/* AC97 Registers.
-*/
+#define PSC_SEL_PS_DISABLED 0
+#define PSC_SEL_PS_SPIMODE 2
+#define PSC_SEL_PS_I2SMODE 3
+#define PSC_SEL_PS_AC97MODE 4
+#define PSC_SEL_PS_SMBUSMODE 5
+
+#define PSC_CTRL_DISABLE 0
+#define PSC_CTRL_SUSPEND 2
+#define PSC_CTRL_ENABLE 3
+
+/* AC97 Registers. */
#define PSC_AC97CFG_OFFSET 0x00000008
#define PSC_AC97MSK_OFFSET 0x0000000c
#define PSC_AC97PCR_OFFSET 0x00000010
#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
-/* AC97 Config Register.
-*/
+/* AC97 Config Register. */
#define PSC_AC97CFG_RT_MASK (3 << 30)
#define PSC_AC97CFG_RT_FIFO1 (0 << 30)
#define PSC_AC97CFG_RT_FIFO2 (1 << 30)
#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1)
#define PSC_AC97CFG_GE_ENABLE (1)
-/* Enable slots 3-12.
-*/
+/* Enable slots 3-12. */
#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11))
#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1))
-/* The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
* The only sensible numbers are 7, 9, or possibly 11. Nah, just do the
* arithmetic in the macro.
*/
-#define PSC_AC97CFG_SET_LEN(x) (((((x)-2)/2) & 0xf) << 21)
+#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21)
#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2)
-/* AC97 Mask Register.
-*/
+/* AC97 Mask Register. */
#define PSC_AC97MSK_GR (1 << 25)
#define PSC_AC97MSK_CD (1 << 24)
#define PSC_AC97MSK_RR (1 << 13)
PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
PSC_AC97MSK_RD | PSC_AC97MSK_TD)
-/* AC97 Protocol Control Register.
-*/
+/* AC97 Protocol Control Register. */
#define PSC_AC97PCR_RC (1 << 6)
#define PSC_AC97PCR_RP (1 << 5)
#define PSC_AC97PCR_RS (1 << 4)
#define PSC_AC97PCR_TP (1 << 1)
#define PSC_AC97PCR_TS (1 << 0)
-/* AC97 Status register (read only).
-*/
+/* AC97 Status register (read only). */
#define PSC_AC97STAT_CB (1 << 26)
#define PSC_AC97STAT_CP (1 << 25)
#define PSC_AC97STAT_CR (1 << 24)
#define PSC_AC97STAT_DR (1 << 1)
#define PSC_AC97STAT_SR (1 << 0)
-/* AC97 Event Register.
-*/
+/* AC97 Event Register. */
#define PSC_AC97EVNT_GR (1 << 25)
#define PSC_AC97EVNT_CD (1 << 24)
#define PSC_AC97EVNT_RR (1 << 13)
#define PSC_AC97EVNT_RD (1 << 5)
#define PSC_AC97EVNT_TD (1 << 4)
-/* CODEC Command Register.
-*/
+/* CODEC Command Register. */
#define PSC_AC97CDC_RD (1 << 25)
#define PSC_AC97CDC_ID_MASK (3 << 23)
#define PSC_AC97CDC_INDX_MASK (0x7f << 16)
-#define PSC_AC97CDC_ID(x) (((x) & 0x3) << 23)
+#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23)
#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16)
-/* AC97 Reset Control Register.
-*/
+/* AC97 Reset Control Register. */
#define PSC_AC97RST_RST (1 << 1)
#define PSC_AC97RST_SNC (1 << 0)
-
-/* PSC in I2S Mode.
-*/
+/* PSC in I2S Mode. */
typedef struct psc_i2s {
u32 psc_sel;
u32 psc_ctrl;
u32 psc_i2sudf;
} psc_i2s_t;
-/* I2S Config Register.
-*/
+/* I2S Config Register. */
#define PSC_I2SCFG_RT_MASK (3 << 30)
#define PSC_I2SCFG_RT_FIFO1 (0 << 30)
#define PSC_I2SCFG_RT_FIFO2 (1 << 30)
#define PSC_I2SCFG_MLJ (1 << 10)
#define PSC_I2SCFG_XM (1 << 9)
-/* The word length equation is simply LEN+1.
- */
+/* The word length equation is simply LEN+1. */
#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4)
#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1)
#define PSC_I2SCFG_MLF (1 << 1)
#define PSC_I2SCFG_MS (1 << 0)
-/* I2S Mask Register.
-*/
+/* I2S Mask Register. */
#define PSC_I2SMSK_RR (1 << 13)
#define PSC_I2SMSK_RO (1 << 12)
#define PSC_I2SMSK_RU (1 << 11)
PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
PSC_I2SMSK_RD | PSC_I2SMSK_TD)
-/* I2S Protocol Control Register.
-*/
+/* I2S Protocol Control Register. */
#define PSC_I2SPCR_RC (1 << 6)
#define PSC_I2SPCR_RP (1 << 5)
#define PSC_I2SPCR_RS (1 << 4)
#define PSC_I2SPCR_TP (1 << 1)
#define PSC_I2SPCR_TS (1 << 0)
-/* I2S Status register (read only).
-*/
+/* I2S Status register (read only). */
#define PSC_I2SSTAT_RF (1 << 13)
#define PSC_I2SSTAT_RE (1 << 12)
#define PSC_I2SSTAT_RR (1 << 11)
#define PSC_I2SSTAT_DR (1 << 1)
#define PSC_I2SSTAT_SR (1 << 0)
-/* I2S Event Register.
-*/
+/* I2S Event Register. */
#define PSC_I2SEVNT_RR (1 << 13)
#define PSC_I2SEVNT_RO (1 << 12)
#define PSC_I2SEVNT_RU (1 << 11)
#define PSC_I2SEVNT_RD (1 << 5)
#define PSC_I2SEVNT_TD (1 << 4)
-/* PSC in SPI Mode.
-*/
+/* PSC in SPI Mode. */
typedef struct psc_spi {
u32 psc_sel;
u32 psc_ctrl;
u32 psc_spitxrx;
} psc_spi_t;
-/* SPI Config Register.
-*/
+/* SPI Config Register. */
#define PSC_SPICFG_RT_MASK (3 << 30)
#define PSC_SPICFG_RT_FIFO1 (0 << 30)
#define PSC_SPICFG_RT_FIFO2 (1 << 30)
#define PSC_SPICFG_MLF (1 << 1)
#define PSC_SPICFG_MO (1 << 0)
-/* SPI Mask Register.
-*/
+/* SPI Mask Register. */
#define PSC_SPIMSK_MM (1 << 16)
#define PSC_SPIMSK_RR (1 << 13)
#define PSC_SPIMSK_RO (1 << 12)
PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
PSC_SPIMSK_MD)
-/* SPI Protocol Control Register.
-*/
+/* SPI Protocol Control Register. */
#define PSC_SPIPCR_RC (1 << 6)
#define PSC_SPIPCR_SP (1 << 5)
#define PSC_SPIPCR_SS (1 << 4)
#define PSC_SPIPCR_TC (1 << 2)
#define PSC_SPIPCR_MS (1 << 0)
-/* SPI Status register (read only).
-*/
+/* SPI Status register (read only). */
#define PSC_SPISTAT_RF (1 << 13)
#define PSC_SPISTAT_RE (1 << 12)
#define PSC_SPISTAT_RR (1 << 11)
#define PSC_SPISTAT_DR (1 << 1)
#define PSC_SPISTAT_SR (1 << 0)
-/* SPI Event Register.
-*/
+/* SPI Event Register. */
#define PSC_SPIEVNT_MM (1 << 16)
#define PSC_SPIEVNT_RR (1 << 13)
#define PSC_SPIEVNT_RO (1 << 12)
#define PSC_SPIEVNT_SD (1 << 5)
#define PSC_SPIEVNT_MD (1 << 4)
-/* Transmit register control.
-*/
+/* Transmit register control. */
#define PSC_SPITXRX_LC (1 << 29)
#define PSC_SPITXRX_SR (1 << 28)
-/* PSC in SMBus (I2C) Mode.
-*/
+/* PSC in SMBus (I2C) Mode. */
typedef struct psc_smb {
u32 psc_sel;
u32 psc_ctrl;
u32 psc_smbtmr;
} psc_smb_t;
-/* SMBus Config Register.
-*/
+/* SMBus Config Register. */
#define PSC_SMBCFG_RT_MASK (3 << 30)
#define PSC_SMBCFG_RT_FIFO1 (0 << 30)
#define PSC_SMBCFG_RT_FIFO2 (1 << 30)
#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1)
-/* SMBus Mask Register.
-*/
+/* SMBus Mask Register. */
#define PSC_SMBMSK_DN (1 << 30)
#define PSC_SMBMSK_AN (1 << 29)
#define PSC_SMBMSK_AL (1 << 28)
PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
PSC_SMBMSK_MD)
-/* SMBus Protocol Control Register.
-*/
+/* SMBus Protocol Control Register. */
#define PSC_SMBPCR_DC (1 << 2)
#define PSC_SMBPCR_MS (1 << 0)
-/* SMBus Status register (read only).
-*/
+/* SMBus Status register (read only). */
#define PSC_SMBSTAT_BB (1 << 28)
#define PSC_SMBSTAT_RF (1 << 13)
#define PSC_SMBSTAT_RE (1 << 12)
#define PSC_SMBSTAT_DR (1 << 1)
#define PSC_SMBSTAT_SR (1 << 0)
-/* SMBus Event Register.
-*/
+/* SMBus Event Register. */
#define PSC_SMBEVNT_DN (1 << 30)
#define PSC_SMBEVNT_AN (1 << 29)
#define PSC_SMBEVNT_AL (1 << 28)
PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
PSC_SMBEVNT_MD)
-/* Transmit register control.
-*/
+/* Transmit register control. */
#define PSC_SMBTXRX_RSR (1 << 28)
#define PSC_SMBTXRX_STP (1 << 29)
-#define PSC_SMBTXRX_DATAMASK (0xff)
+#define PSC_SMBTXRX_DATAMASK 0xff
-/* SMBus protocol timers register.
-*/
-#define PSC_SMBTMR_SET_TH(x) (((x) & 0x3) << 30)
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30)
#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25)
#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20)
#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15)
#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5)
#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0)
-
#endif /* _AU1000_PSC_H_ */
/*
- * AMD Alchemy DB1200 Referrence Board
- * Board Registers defines.
+ * AMD Alchemy DBAu1200 Reference Board
+ * Board register defines.
*
* ########################################################################
*
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the DBAu1200 board.
+ * Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC'97 and I2S are muxed on the DBAu1200 board.
+ * Refer to board documentation.
*/
-#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xB9800000
+#define BCSR_KSEG1_ADDR 0xB9800000
typedef volatile struct
{
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
#define BCSR_RESETS_TV 0x0010
-/* not resets but in the same register */
-#define BCSR_RESETS_PWMR1mUX 0x0800
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x20000000
+#define NAND_PHYS_ADDR 0x20000000
/*
- * External Interrupts for Pb1200 as of 8/6/2004.
+ * External Interrupts for DBAu1200 as of 8/6/2004.
* Bit positions in the CPLD registers can be calculated by taking
* the interrupt define and subtracting the DB1200_INT_BEGIN value.
*
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-
-/* PCMCIA Db1x00 specific defines */
-
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/*
+ * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-#define BOARD_PC0_INT DB1200_PC0_INT
-#define BOARD_PC1_INT DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-/* Nand chip select */
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_DB1200_H */
-
/*
- * AMD Alchemy DB1x00 Reference Boards
+ * AMD Alchemy DBAu1x00 Reference Boards
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* ########################################################################
#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xAF000000
-#define NAND_PHYS_ADDR 0x20000000
+#define BCSR_KSEG1_ADDR 0xAF000000
+#define NAND_PHYS_ADDR 0x20000000
#else
#define BCSR_KSEG1_ADDR 0xAE000000
#endif
/*
- * Overlay data structure of the Db1x00 board registers.
- * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
+ * Overlay data structure of the DBAu1x00 board registers.
+ * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
*/
typedef volatile struct
{
#define BCSR_SWRESET_RESET 0x0080
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA DBAu1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-/* SD controller macros */
/*
- * Detect card.
+ * SD controller macros
*/
+
+/* Detect card. */
#define mmc_card_inserted(_n_, _res_) \
do { \
BCSR * const bcsr = (BCSR *)0xAE000000; \
unsigned long mmc_pwr, mmc_wp, board_specific; \
if ((_n_)) { \
mmc_pwr = BCSR_BOARD_SD1_PWR; \
- mmc_wp = BCSR_BOARD_SD1_WP; \
+ mmc_wp = BCSR_BOARD_SD1_WP; \
} else { \
mmc_pwr = BCSR_BOARD_SD0_PWR; \
- mmc_wp = BCSR_BOARD_SD0_WP; \
+ mmc_wp = BCSR_BOARD_SD0_WP; \
} \
board_specific = au_readl((unsigned long)(&bcsr->specific)); \
if (!(board_specific & mmc_wp)) {/* low means card present */ \
} while (0)
-/* NAND defines */
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * NAND defines
+ *
+ * Timing values as described in databook, * ns value stripped of the
* lower 2 bits.
- * These defines are here rather than an SOC1550 generic file because
+ * These defines are here rather than an Au1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
-#define NAND_CS 1
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
+#define NAND_CS 1
-/* should be done by yamon */
-#define NAND_STCFG 0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_DB1X00_H */
-
/*
- * Alchemy Semi PB1000 Referrence Board
+ * Alchemy Semi Pb1000 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
#define __ASM_PB1000_H
/* PCMCIA PB1000 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-#define PB1000_PCR 0xBE000000
-# define PCR_SLOT_0_VPP0 (1<<0)
-# define PCR_SLOT_0_VPP1 (1<<1)
-# define PCR_SLOT_0_VCC0 (1<<2)
-# define PCR_SLOT_0_VCC1 (1<<3)
-# define PCR_SLOT_0_RST (1<<4)
-
-# define PCR_SLOT_1_VPP0 (1<<8)
-# define PCR_SLOT_1_VPP1 (1<<9)
-# define PCR_SLOT_1_VCC0 (1<<10)
-# define PCR_SLOT_1_VCC1 (1<<11)
-# define PCR_SLOT_1_RST (1<<12)
-
-#define PB1000_MDR 0xBE000004
-# define MDR_PI (1<<5) /* pcmcia int latch */
-# define MDR_EPI (1<<14) /* enable pcmcia int */
-# define MDR_CPI (1<<15) /* clear pcmcia int */
-
-#define PB1000_ACR1 0xBE000008
-# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */
-# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */
-# define ACR1_SLOT_0_READY (1<<2) /* ready */
-# define ACR1_SLOT_0_STATUS (1<<3) /* status change */
-# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */
-# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */
-# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */
-# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */
-# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */
-# define ACR1_SLOT_1_READY (1<<10) /* ready */
-# define ACR1_SLOT_1_STATUS (1<<11) /* status change */
-# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */
-# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */
-# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
-
-#define CPLD_AUX0 0xBE00000C
-#define CPLD_AUX1 0xBE000010
-#define CPLD_AUX2 0xBE000014
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+#define PB1000_PCR 0xBE000000
+# define PCR_SLOT_0_VPP0 (1 << 0)
+# define PCR_SLOT_0_VPP1 (1 << 1)
+# define PCR_SLOT_0_VCC0 (1 << 2)
+# define PCR_SLOT_0_VCC1 (1 << 3)
+# define PCR_SLOT_0_RST (1 << 4)
+# define PCR_SLOT_1_VPP0 (1 << 8)
+# define PCR_SLOT_1_VPP1 (1 << 9)
+# define PCR_SLOT_1_VCC0 (1 << 10)
+# define PCR_SLOT_1_VCC1 (1 << 11)
+# define PCR_SLOT_1_RST (1 << 12)
+
+#define PB1000_MDR 0xBE000004
+# define MDR_PI (1 << 5) /* PCMCIA int latch */
+# define MDR_EPI (1 << 14) /* enable PCMCIA int */
+# define MDR_CPI (1 << 15) /* clear PCMCIA int */
+
+#define PB1000_ACR1 0xBE000008
+# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */
+# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */
+# define ACR1_SLOT_0_READY (1 << 2) /* ready */
+# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */
+# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */
+# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */
+# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */
+# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */
+# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */
+# define ACR1_SLOT_1_READY (1 << 10) /* ready */
+# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */
+# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */
+# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */
+# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */
+
+#define CPLD_AUX0 0xBE00000C
+#define CPLD_AUX1 0xBE000010
+#define CPLD_AUX2 0xBE000014
/* Voltage levels */
/* VPPEN1 - VPPEN0 */
-#define VPP_GND ((0<<1) | (0<<0))
-#define VPP_5V ((1<<1) | (0<<0))
-#define VPP_3V ((0<<1) | (1<<0))
-#define VPP_12V ((0<<1) | (1<<0))
-#define VPP_HIZ ((1<<1) | (1<<0))
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V ((1 << 1) | (0 << 0))
+#define VPP_3V ((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
/* VCCEN1 - VCCEN0 */
-#define VCC_3V ((0<<1) | (1<<0))
-#define VCC_5V ((1<<1) | (0<<0))
-#define VCC_HIZ ((0<<1) | (0<<0))
+#define VCC_3V ((0 << 1) | (1 << 0))
+#define VCC_5V ((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
-
-/* PCI PB1000 specific defines */
-/* The reason these defines are here instead of au1000.h is because
- * the Au1000 does not have a PCI bus controller so the PCI implementation
- * on the some of the older Pb1000 boards was very board specific.
- */
-#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */
-
-#define SDRAM_DEVID 0xBA010000
-#define SDRAM_CMD 0xBA010004
-#define SDRAM_CLASS 0xBA010008
-#define SDRAM_MISC 0xBA01000C
-#define SDRAM_MBAR 0xBA010010
-
-#define PCI_IO_DATA_PORT 0xBA800000
-
-#define PCI_IO_ADDR 0xBE00001C
-#define PCI_INT_ACK 0xBBC00000
-#define PCI_IO_READ 0xBBC00020
-#define PCI_IO_WRITE 0xBBC00030
-
-#define PCI_BRIDGE_CONFIG 0xBE000018
-
-#define PCI_IO_START 0x10000000
-#define PCI_IO_END 0x1000ffff
-#define PCI_MEM_START 0x18000000
-#define PCI_MEM_END 0x18ffffff
-
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 1
-
-static inline u8 au_pci_io_readb(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xff);
-}
-
-static inline u16 au_pci_io_readw(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xffff);
-}
-
-static inline u32 au_pci_io_readl(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
- return readl(PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writeb(u8 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writew(u16 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writel(u32 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void set_sdram_extbyte(void)
-{
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
-}
-
-static inline void set_slot_extbyte(void)
-{
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
-}
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#endif /* __ASM_PB1000_H */
/*
- * Alchemy Semi PB1100 Referrence Board
+ * Alchemy Semi Pb1100 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
#ifndef __ASM_PB1100_H
#define __ASM_PB1100_H
-#define PB1100_IDENT 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-# define PB1100_ROM_SEL (1<<15)
-# define PB1100_ROM_SIZ (1<<14)
-# define PB1100_SWAP_BOOT (1<<13)
-# define PB1100_FLASH_WP (1<<12)
-# define PB1100_ROM_H_STS (1<<11)
-# define PB1100_ROM_L_STS (1<<10)
-# define PB1100_FLASH_H_STS (1<<9)
-# define PB1100_FLASH_L_STS (1<<8)
-# define PB1100_SRAM_SIZ (1<<7)
-# define PB1100_TSC_BUSY (1<<6)
-# define PB1100_PCMCIA_VS_MASK (3<<4)
-# define PB1100_RS232_CD (1<<3)
-# define PB1100_RS232_CTS (1<<2)
-# define PB1100_RS232_DSR (1<<1)
-# define PB1100_RS232_RI (1<<0)
+#define PB1100_IDENT 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+# define PB1100_ROM_SEL (1 << 15)
+# define PB1100_ROM_SIZ (1 << 14)
+# define PB1100_SWAP_BOOT (1 << 13)
+# define PB1100_FLASH_WP (1 << 12)
+# define PB1100_ROM_H_STS (1 << 11)
+# define PB1100_ROM_L_STS (1 << 10)
+# define PB1100_FLASH_H_STS (1 << 9)
+# define PB1100_FLASH_L_STS (1 << 8)
+# define PB1100_SRAM_SIZ (1 << 7)
+# define PB1100_TSC_BUSY (1 << 6)
+# define PB1100_PCMCIA_VS_MASK (3 << 4)
+# define PB1100_RS232_CD (1 << 3)
+# define PB1100_RS232_CTS (1 << 2)
+# define PB1100_RS232_DSR (1 << 1)
+# define PB1100_RS232_RI (1 << 0)
-#define PB1100_IRDA_RS232 0xAE00000C
-# define PB1100_IRDA_FULL (0<<14) /* full power */
-# define PB1100_IRDA_SHUTDOWN (1<<14)
-# define PB1100_IRDA_TT (2<<14) /* 2/3 power */
-# define PB1100_IRDA_OT (3<<14) /* 1/3 power */
-# define PB1100_IRDA_FIR (1<<13)
+#define PB1100_IRDA_RS232 0xAE00000C
+# define PB1100_IRDA_FULL (0 << 14) /* full power */
+# define PB1100_IRDA_SHUTDOWN (1 << 14)
+# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */
+# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */
+# define PB1100_IRDA_FIR (1 << 13)
-#define PCMCIA_BOARD_REG 0xAE000010
-# define PB1100_SD_WP1_RO (1<<15) /* read only */
-# define PB1100_SD_WP0_RO (1<<14) /* read only */
-# define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */
-# define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */
-# define PB1100_SEL_SD_CONN1 (1<<9)
-# define PB1100_SEL_SD_CONN0 (1<<8)
-# define PC_DEASSERT_RST (1<<7)
-# define PC_DRV_EN (1<<4)
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PB1100_SD_WP1_RO (1 << 15) /* read only */
+# define PB1100_SD_WP0_RO (1 << 14) /* read only */
+# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */
+# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */
+# define PB1100_SEL_SD_CONN1 (1 << 9)
+# define PB1100_SEL_SD_CONN0 (1 << 8)
+# define PC_DEASSERT_RST (1 << 7)
+# define PC_DRV_EN (1 << 4)
-#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
+#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
-#define PB1100_RST_VDDI 0xAE00001C
-# define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */
-# define PB1100_VDDI_MASK (0x1F)
+#define PB1100_RST_VDDI 0xAE00001C
+# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */
+# define PB1100_VDDI_MASK 0x1F
-#define PB1100_LEDS 0xAE000018
+#define PB1100_LEDS 0xAE000018
-/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0 is the LED Display's decimal points.
+/*
+ * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0 is the LED Display's decimal points.
*/
-#define PB1100_HEX_LED 0xAE000018
+#define PB1100_HEX_LED 0xAE000018
-/* PCMCIA PB1100 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA Pb1100 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1100_H */
/*
- * AMD Alchemy PB1200 Referrence Board
+ * AMD Alchemy Pb1200 Referrence Board
* Board Registers defines.
*
* ########################################################################
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_SD1WP 0x0800
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
/* not resets but in the same register */
-#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_WSCFSM 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
-#define BCSR_RESETS_SD1MUX 0x8000
+#define BCSR_RESETS_SD1MUX 0x8000
#define BCSR_PCMCIA_PC0VPP 0x0003
#define BCSR_PCMCIA_PC0VCC 0x000C
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
#define BCSR_INT_SD1INSERT 0x4000
#define BCSR_INT_SD1EJECT 0x8000
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
#define SMC91C111_PHYS_ADDR 0x0D000300
#define SMC91C111_INT PB1200_ETH_INT
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x1C000000
+#define NAND_PHYS_ADDR 0x1C000000
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
- * These defines are here rather than an SOC1200 generic file because
+ * These defines are here rather than an Au1200 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
-
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
/*
* External Interrupts for Pb1200 as of 8/6/2004.
PB1200_INT_END = PB1200_INT_BEGIN + 15
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-#define BOARD_PC0_INT PB1200_PC0_INT
-#define BOARD_PC1_INT PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-/* Nand chip select */
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_PB1200_H */
-
/*
- * Alchemy Semi PB1500 Referrence Board
+ * Alchemy Semi Pb1500 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
#ifndef __ASM_PB1500_H
#define __ASM_PB1500_H
+#define IDENT_BOARD_REG 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+#define PCI_BOARD_REG 0xAE000010
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PC_DEASSERT_RST 0x80
+# define PC_DRV_EN 0x10
+#define PB1500_G_CONTROL 0xAE000014
+#define PB1500_RST_VDDI 0xAE00001C
+#define PB1500_LEDS 0xAE000018
-#define IDENT_BOARD_REG 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-#define PCI_BOARD_REG 0xAE000010
-#define PCMCIA_BOARD_REG 0xAE000010
- #define PC_DEASSERT_RST 0x80
- #define PC_DRV_EN 0x10
-#define PB1500_G_CONTROL 0xAE000014
-#define PB1500_RST_VDDI 0xAE00001C
-#define PB1500_LEDS 0xAE000018
+#define PB1500_HEX_LED 0xAF000004
+#define PB1500_HEX_LED_BLANK 0xAF000008
-#define PB1500_HEX_LED 0xAF000004
-#define PB1500_HEX_LED_BLANK 0xAF000008
-
-/* PCMCIA PB1500 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA Pb1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1500_H */
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
#define BCSR_PHYS_ADDR 0xAF000000
#define BCSR_SYSTEM_POWEROFF 0x4000
#define BCSR_SYSTEM_RESET 0x8000
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
#define PB1550_BOTH_BANKS
#define PB1550_USER_ONLY
#endif
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
* These defines are here rather than an SOC1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
#define NAND_CS 1
-/* should be done by yamon */
-#define NAND_STCFG 0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_PB1550_H */
extern unsigned int rtlx_write_poll(int index);
enum rtlx_state {
- RTLX_STATE_UNUSED,
+ RTLX_STATE_UNUSED = 0,
RTLX_STATE_INITIALISED,
RTLX_STATE_REMOTE_READY,
RTLX_STATE_OPENED
};
-#define RTLX_BUFFER_SIZE 1024
+#define RTLX_BUFFER_SIZE 2048
/* each channel supports read and write.
linux (vpe0) reads lx_buffer and writes rt_buffer
}
-extern inline void * xchg_ptr(void * m, void * val)
+static inline void * xchg_ptr(void * m, void * val)
{
return (void *) xchg_u32(m, (unsigned long) val);
}
#define _S390_TYPES_H
#ifndef __s390x__
-# include <asm-generic/int-l64.h>
-#else
# include <asm-generic/int-ll64.h>
+#else
+# include <asm-generic/int-l64.h>
#endif
#ifndef __ASSEMBLY__
#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
struct pt_regs {
unsigned long psr;
unsigned long pc;
static inline int need_resched(void)
{
- return unlikely(test_tsk_need_resched(current));
+ return unlikely(test_thread_flag(TIF_NEED_RESCHED));
}
/*
projects / linux-beck.git / commitdiff