]> git.karo-electronics.de Git - linux-beck.git/commitdiff
drm/i915: add proper CPU/PCH checks to crtc_mode_set functions
authorPaulo Zanoni <paulo.r.zanoni@intel.com>
Fri, 5 Oct 2012 15:05:56 +0000 (12:05 -0300)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Wed, 10 Oct 2012 13:56:47 +0000 (15:56 +0200)
On ironlake_crtc_mode_set, WARN if not using IBX or CPT.

On haswell_crtc_mode_set, only run IBX/CPT code on IBX/CPT. I am still
not sure whether IBX/CPT will be possible with a Haswell CPU, so leave
the code there for now and put a WARN in case we spot it.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_display.c

index ef89132464773f64655646bc572add3587d50445..213831f57ef16dc420f8aed694c2efad62bed509 100644 (file)
@@ -5002,6 +5002,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                num_connectors++;
        }
 
+       WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
+            "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
+
        ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
                                     &has_reduced_clock, &reduced_clock);
        if (!ok) {
@@ -5027,12 +5030,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
        drm_mode_debug_printmodeline(mode);
 
-       /* CPU eDP is the only output that doesn't need a PCH PLL of its own on
-        * pre-Haswell/LPT generation */
-       if (HAS_PCH_LPT(dev)) {
-               DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
-                               pipe);
-       } else if (!is_cpu_edp) {
+       /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
+       if (!is_cpu_edp) {
                struct intel_pch_pll *pll;
 
                pll = intel_get_pch_pll(intel_crtc, dpll, fp);
@@ -5155,7 +5154,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
        int plane = intel_crtc->plane;
        int num_connectors = 0;
        intel_clock_t clock, reduced_clock;
-       u32 dpll, fp = 0, fp2 = 0;
+       u32 dpll = 0, fp = 0, fp2 = 0;
        bool ok, has_reduced_clock = false;
        bool is_lvds = false, is_dp = false, is_cpu_edp = false;
        struct intel_encoder *encoder;
@@ -5181,11 +5180,21 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
                num_connectors++;
        }
 
-       ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
-                                    &has_reduced_clock, &reduced_clock);
-       if (!ok) {
-               DRM_ERROR("Couldn't find PLL settings for mode!\n");
-               return -EINVAL;
+       /* We are not sure yet this won't happen. */
+       WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
+            INTEL_PCH_TYPE(dev));
+
+       WARN(num_connectors != 1, "%d connectors attached to pipe %c\n",
+            num_connectors, pipe_name(pipe));
+
+       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+               ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
+                                            &has_reduced_clock,
+                                            &reduced_clock);
+               if (!ok) {
+                       DRM_ERROR("Couldn't find PLL settings for mode!\n");
+                       return -EINVAL;
+               }
        }
 
        /* Ensure that the cursor is valid for the new mode before changing... */
@@ -5196,104 +5205,112 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
        if (is_lvds && dev_priv->lvds_dither)
                dither = true;
 
-       fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-       if (has_reduced_clock)
-               fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
-                       reduced_clock.m2;
-
-       dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
-
        DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
        drm_mode_debug_printmodeline(mode);
 
-       /* CPU eDP is the only output that doesn't need a PCH PLL of its own on
-        * pre-Haswell/LPT generation */
-       if (HAS_PCH_LPT(dev)) {
-               DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
-                               pipe);
-       } else if (!is_cpu_edp) {
-               struct intel_pch_pll *pll;
+       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+               fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+               if (has_reduced_clock)
+                       fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+                             reduced_clock.m2;
+
+               dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
+                                            fp);
+
+               /* CPU eDP is the only output that doesn't need a PCH PLL of its
+                * own on pre-Haswell/LPT generation */
+               if (!is_cpu_edp) {
+                       struct intel_pch_pll *pll;
+
+                       pll = intel_get_pch_pll(intel_crtc, dpll, fp);
+                       if (pll == NULL) {
+                               DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
+                                                pipe);
+                               return -EINVAL;
+                       }
+               } else
+                       intel_put_pch_pll(intel_crtc);
 
-               pll = intel_get_pch_pll(intel_crtc, dpll, fp);
-               if (pll == NULL) {
-                       DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
-                                        pipe);
-                       return -EINVAL;
-               }
-       } else
-               intel_put_pch_pll(intel_crtc);
+               /* The LVDS pin pair needs to be on before the DPLLs are
+                * enabled.  This is an exception to the general rule that
+                * mode_set doesn't turn things on.
+                */
+               if (is_lvds) {
+                       temp = I915_READ(PCH_LVDS);
+                       temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+                       if (HAS_PCH_CPT(dev)) {
+                               temp &= ~PORT_TRANS_SEL_MASK;
+                               temp |= PORT_TRANS_SEL_CPT(pipe);
+                       } else {
+                               if (pipe == 1)
+                                       temp |= LVDS_PIPEB_SELECT;
+                               else
+                                       temp &= ~LVDS_PIPEB_SELECT;
+                       }
 
-       /* The LVDS pin pair needs to be on before the DPLLs are enabled.
-        * This is an exception to the general rule that mode_set doesn't turn
-        * things on.
-        */
-       if (is_lvds) {
-               temp = I915_READ(PCH_LVDS);
-               temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-               if (HAS_PCH_CPT(dev)) {
-                       temp &= ~PORT_TRANS_SEL_MASK;
-                       temp |= PORT_TRANS_SEL_CPT(pipe);
-               } else {
-                       if (pipe == 1)
-                               temp |= LVDS_PIPEB_SELECT;
+                       /* set the corresponsding LVDS_BORDER bit */
+                       temp |= dev_priv->lvds_border_bits;
+                       /* Set the B0-B3 data pairs corresponding to whether
+                        * we're going to set the DPLLs for dual-channel mode or
+                        * not.
+                        */
+                       if (clock.p2 == 7)
+                               temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
                        else
-                               temp &= ~LVDS_PIPEB_SELECT;
+                               temp &= ~(LVDS_B0B3_POWER_UP |
+                                         LVDS_CLKB_POWER_UP);
+
+                       /* It would be nice to set 24 vs 18-bit mode
+                        * (LVDS_A3_POWER_UP) appropriately here, but we need to
+                        * look more thoroughly into how panels behave in the
+                        * two modes.
+                        */
+                       temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+                       if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+                               temp |= LVDS_HSYNC_POLARITY;
+                       if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+                               temp |= LVDS_VSYNC_POLARITY;
+                       I915_WRITE(PCH_LVDS, temp);
                }
-
-               /* set the corresponsding LVDS_BORDER bit */
-               temp |= dev_priv->lvds_border_bits;
-               /* Set the B0-B3 data pairs corresponding to whether we're going to
-                * set the DPLLs for dual-channel mode or not.
-                */
-               if (clock.p2 == 7)
-                       temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-               else
-                       temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
-               /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
-                * appropriately here, but we need to look more thoroughly into how
-                * panels behave in the two modes.
-                */
-               temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-               if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-                       temp |= LVDS_HSYNC_POLARITY;
-               if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-                       temp |= LVDS_VSYNC_POLARITY;
-               I915_WRITE(PCH_LVDS, temp);
        }
 
        if (is_dp && !is_cpu_edp) {
                intel_dp_set_m_n(crtc, mode, adjusted_mode);
        } else {
-               /* For non-DP output, clear any trans DP clock recovery setting.*/
-               I915_WRITE(TRANSDATA_M1(pipe), 0);
-               I915_WRITE(TRANSDATA_N1(pipe), 0);
-               I915_WRITE(TRANSDPLINK_M1(pipe), 0);
-               I915_WRITE(TRANSDPLINK_N1(pipe), 0);
-       }
-
-       if (intel_crtc->pch_pll) {
-               I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-
-               /* Wait for the clocks to stabilize. */
-               POSTING_READ(intel_crtc->pch_pll->pll_reg);
-               udelay(150);
-
-               /* The pixel multiplier can only be updated once the
-                * DPLL is enabled and the clocks are stable.
-                *
-                * So write it again.
-                */
-               I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+               if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+                       /* For non-DP output, clear any trans DP clock recovery
+                        * setting.*/
+                       I915_WRITE(TRANSDATA_M1(pipe), 0);
+                       I915_WRITE(TRANSDATA_N1(pipe), 0);
+                       I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+                       I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+               }
        }
 
        intel_crtc->lowfreq_avail = false;
-       if (intel_crtc->pch_pll) {
-               if (is_lvds && has_reduced_clock && i915_powersave) {
-                       I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
-                       intel_crtc->lowfreq_avail = true;
-               } else {
-                       I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
+       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+               if (intel_crtc->pch_pll) {
+                       I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+
+                       /* Wait for the clocks to stabilize. */
+                       POSTING_READ(intel_crtc->pch_pll->pll_reg);
+                       udelay(150);
+
+                       /* The pixel multiplier can only be updated once the
+                        * DPLL is enabled and the clocks are stable.
+                        *
+                        * So write it again.
+                        */
+                       I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+               }
+
+               if (intel_crtc->pch_pll) {
+                       if (is_lvds && has_reduced_clock && i915_powersave) {
+                               I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
+                               intel_crtc->lowfreq_avail = true;
+                       } else {
+                               I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
+                       }
                }
        }
 
@@ -5301,8 +5318,9 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 
        ironlake_set_m_n(crtc, mode, adjusted_mode);
 
-       if (is_cpu_edp)
-               ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
+               if (is_cpu_edp)
+                       ironlake_set_pll_edp(crtc, adjusted_mode->clock);
 
        ironlake_set_pipeconf(crtc, adjusted_mode, dither);