+++ /dev/null
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _rpcosl_h_
-#define _rpcosl_h_
-
-typedef struct rpc_osl rpc_osl_t;
-extern rpc_osl_t *rpc_osl_attach(struct osl_info *osh);
-extern void rpc_osl_detach(rpc_osl_t *rpc_osh);
-
-#define RPC_OSL_LOCK(rpc_osh) rpc_osl_lock((rpc_osh))
-#define RPC_OSL_UNLOCK(rpc_osh) rpc_osl_unlock((rpc_osh))
-#define RPC_OSL_WAIT(rpc_osh, to, ptimedout) rpc_osl_wait((rpc_osh), (to), (ptimedout))
-#define RPC_OSL_WAKE(rpc_osh) rpc_osl_wake((rpc_osh))
-extern void rpc_osl_lock(rpc_osl_t *rpc_osh);
-extern void rpc_osl_unlock(rpc_osl_t *rpc_osh);
-extern int rpc_osl_wait(rpc_osl_t *rpc_osh, uint ms, bool *ptimedout);
-extern void rpc_osl_wake(rpc_osl_t *rpc_osh);
-
-#endif /* _rpcosl_h_ */
+++ /dev/null
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _SPI_H
-#define _SPI_H
-
-/*
- * Brcm SPI Device Register Map.
- *
- */
-
-typedef volatile struct {
- u8 config; /* 0x00, len, endian, clock, speed, polarity, wakeup */
- u8 response_delay; /* 0x01, read response delay in bytes (corerev < 3) */
- u8 status_enable; /* 0x02, status-enable, intr with status, response_delay
- * function selection, command/data error check
- */
- u8 reset_bp; /* 0x03, reset on wlan/bt backplane reset (corerev >= 1) */
- u16 intr_reg; /* 0x04, Intr status register */
- u16 intr_en_reg; /* 0x06, Intr mask register */
- u32 status_reg; /* 0x08, RO, Status bits of last spi transfer */
- u16 f1_info_reg; /* 0x0c, RO, enabled, ready for data transfer, blocksize */
- u16 f2_info_reg; /* 0x0e, RO, enabled, ready for data transfer, blocksize */
- u16 f3_info_reg; /* 0x10, RO, enabled, ready for data transfer, blocksize */
- u32 test_read; /* 0x14, RO 0xfeedbead signature */
- u32 test_rw; /* 0x18, RW */
- u8 resp_delay_f0; /* 0x1c, read resp delay bytes for F0 (corerev >= 3) */
- u8 resp_delay_f1; /* 0x1d, read resp delay bytes for F1 (corerev >= 3) */
- u8 resp_delay_f2; /* 0x1e, read resp delay bytes for F2 (corerev >= 3) */
- u8 resp_delay_f3; /* 0x1f, read resp delay bytes for F3 (corerev >= 3) */
-} spi_regs_t;
-
-/* SPI device register offsets */
-#define SPID_CONFIG 0x00
-#define SPID_RESPONSE_DELAY 0x01
-#define SPID_STATUS_ENABLE 0x02
-#define SPID_RESET_BP 0x03 /* (corerev >= 1) */
-#define SPID_INTR_REG 0x04 /* 16 bits - Interrupt status */
-#define SPID_INTR_EN_REG 0x06 /* 16 bits - Interrupt mask */
-#define SPID_STATUS_REG 0x08 /* 32 bits */
-#define SPID_F1_INFO_REG 0x0C /* 16 bits */
-#define SPID_F2_INFO_REG 0x0E /* 16 bits */
-#define SPID_F3_INFO_REG 0x10 /* 16 bits */
-#define SPID_TEST_READ 0x14 /* 32 bits */
-#define SPID_TEST_RW 0x18 /* 32 bits */
-#define SPID_RESP_DELAY_F0 0x1c /* 8 bits (corerev >= 3) */
-#define SPID_RESP_DELAY_F1 0x1d /* 8 bits (corerev >= 3) */
-#define SPID_RESP_DELAY_F2 0x1e /* 8 bits (corerev >= 3) */
-#define SPID_RESP_DELAY_F3 0x1f /* 8 bits (corerev >= 3) */
-
-/* Bit masks for SPID_CONFIG device register */
-#define WORD_LENGTH_32 0x1 /* 0/1 16/32 bit word length */
-#define ENDIAN_BIG 0x2 /* 0/1 Little/Big Endian */
-#define CLOCK_PHASE 0x4 /* 0/1 clock phase delay */
-#define CLOCK_POLARITY 0x8 /* 0/1 Idle state clock polarity is low/high */
-#define HIGH_SPEED_MODE 0x10 /* 1/0 High Speed mode / Normal mode */
-#define INTR_POLARITY 0x20 /* 1/0 Interrupt active polarity is high/low */
-#define WAKE_UP 0x80 /* 0/1 Wake-up command from Host to WLAN */
-
-/* Bit mask for SPID_RESPONSE_DELAY device register */
-#define RESPONSE_DELAY_MASK 0xFF /* Configurable rd response delay in multiples of 8 bits */
-
-/* Bit mask for SPID_STATUS_ENABLE device register */
-#define STATUS_ENABLE 0x1 /* 1/0 Status sent/not sent to host after read/write */
-#define INTR_WITH_STATUS 0x2 /* 0/1 Do-not / do-interrupt if status is sent */
-#define RESP_DELAY_ALL 0x4 /* Applicability of resp delay to F1 or all func's read */
-#define DWORD_PKT_LEN_EN 0x8 /* Packet len denoted in dwords instead of bytes */
-#define CMD_ERR_CHK_EN 0x20 /* Command error check enable */
-#define DATA_ERR_CHK_EN 0x40 /* Data error check enable */
-
-/* Bit mask for SPID_RESET_BP device register */
-#define RESET_ON_WLAN_BP_RESET 0x4 /* enable reset for WLAN backplane */
-#define RESET_ON_BT_BP_RESET 0x8 /* enable reset for BT backplane */
-#define RESET_SPI 0x80 /* reset the above enabled logic */
-
-/* Bit mask for SPID_INTR_REG device register */
-#define DATA_UNAVAILABLE 0x0001 /* Requested data not available; Clear by writing a "1" */
-#define F2_F3_FIFO_RD_UNDERFLOW 0x0002
-#define F2_F3_FIFO_WR_OVERFLOW 0x0004
-#define COMMAND_ERROR 0x0008 /* Cleared by writing 1 */
-#define DATA_ERROR 0x0010 /* Cleared by writing 1 */
-#define F2_PACKET_AVAILABLE 0x0020
-#define F3_PACKET_AVAILABLE 0x0040
-#define F1_OVERFLOW 0x0080 /* Due to last write. Bkplane has pending write requests */
-#define MISC_INTR0 0x0100
-#define MISC_INTR1 0x0200
-#define MISC_INTR2 0x0400
-#define MISC_INTR3 0x0800
-#define MISC_INTR4 0x1000
-#define F1_INTR 0x2000
-#define F2_INTR 0x4000
-#define F3_INTR 0x8000
-
-/* Bit mask for 32bit SPID_STATUS_REG device register */
-#define STATUS_DATA_NOT_AVAILABLE 0x00000001
-#define STATUS_UNDERFLOW 0x00000002
-#define STATUS_OVERFLOW 0x00000004
-#define STATUS_F2_INTR 0x00000008
-#define STATUS_F3_INTR 0x00000010
-#define STATUS_F2_RX_READY 0x00000020
-#define STATUS_F3_RX_READY 0x00000040
-#define STATUS_HOST_CMD_DATA_ERR 0x00000080
-#define STATUS_F2_PKT_AVAILABLE 0x00000100
-#define STATUS_F2_PKT_LEN_MASK 0x000FFE00
-#define STATUS_F2_PKT_LEN_SHIFT 9
-#define STATUS_F3_PKT_AVAILABLE 0x00100000
-#define STATUS_F3_PKT_LEN_MASK 0xFFE00000
-#define STATUS_F3_PKT_LEN_SHIFT 21
-
-/* Bit mask for 16 bits SPID_F1_INFO_REG device register */
-#define F1_ENABLED 0x0001
-#define F1_RDY_FOR_DATA_TRANSFER 0x0002
-#define F1_MAX_PKT_SIZE 0x01FC
-
-/* Bit mask for 16 bits SPID_F2_INFO_REG device register */
-#define F2_ENABLED 0x0001
-#define F2_RDY_FOR_DATA_TRANSFER 0x0002
-#define F2_MAX_PKT_SIZE 0x3FFC
-
-/* Bit mask for 16 bits SPID_F3_INFO_REG device register */
-#define F3_ENABLED 0x0001
-#define F3_RDY_FOR_DATA_TRANSFER 0x0002
-#define F3_MAX_PKT_SIZE 0x3FFC
-
-/* Bit mask for 32 bits SPID_TEST_READ device register read in 16bit LE mode */
-#define TEST_RO_DATA_32BIT_LE 0xFEEDBEAD
-
-/* Maximum number of I/O funcs */
-#define SPI_MAX_IOFUNCS 4
-
-#define SPI_MAX_PKT_LEN (2048*4)
-
-/* Misc defines */
-#define SPI_FUNC_0 0
-#define SPI_FUNC_1 1
-#define SPI_FUNC_2 2
-#define SPI_FUNC_3 3
-
-#define WAIT_F2RXFIFORDY 100
-#define WAIT_F2RXFIFORDY_DELAY 20
-
-#endif /* _SPI_H */
projects / linux-beck.git / commitdiff