return dib8000_get_adc_power(fe, 1);
}
+static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart)
+{
+ deb_info("AGC control callback: %i\n", restart);
+ dib0090_dcc_freq(fe, restart);
+
+ if (restart == 0) /* before AGC startup */
+ dib0090_set_dc_servo(fe, 1);
+}
+
static struct dib8000_config dib809x_dib8000_config[2] = {
{
.output_mpeg2_in_188_bytes = 1,
.agc_config_count = 2,
.agc = dib8090_agc_config,
- .agc_control = dib0090_dcc_freq,
+ .agc_control = dib8090_agc_control,
.pll = &dib8090_pll_config_12mhz,
.tuner_is_baseband = 1,
.agc_config_count = 2,
.agc = dib8090_agc_config,
- .agc_control = dib0090_dcc_freq,
+ .agc_control = dib8090_agc_control,
.pll = &dib8090_pll_config_12mhz,
.tuner_is_baseband = 1,
.fref_clock_ratio = 6,
};
+static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe)
+{
+ u8 optimal_pll_ratio = 20;
+ u32 freq_adc, ratio, rest, max = 0;
+ u8 pll_ratio;
+
+ for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) {
+ freq_adc = 12 * pll_ratio * (1 << 8) / 16;
+ ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc;
+ rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc;
+
+ if (rest > freq_adc / 2)
+ rest = freq_adc - rest;
+ deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest);
+ if ((rest > max) && (rest > 717)) {
+ optimal_pll_ratio = pll_ratio;
+ max = rest;
+ }
+ }
+ deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio);
+
+ return optimal_pll_ratio;
+}
+
static int dib8096_set_param_override(struct dvb_frontend *fe)
{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dib0700_adapter_state *state = adap->priv;
- u8 band = BAND_OF_FREQUENCY(p->frequency/1000);
- u16 target;
+ u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000);
+ u16 target, ltgain, rf_gain_limit;
+ u32 timf;
int ret = 0;
enum frontend_tune_state tune_state = CT_SHUTDOWN;
- u16 ltgain, rf_gain_limit;
+
+ switch (band) {
+ default:
+ deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency);
+ case BAND_VHF:
+ dib8000_set_gpio(fe, 3, 0, 1);
+ break;
+ case BAND_UHF:
+ dib8000_set_gpio(fe, 3, 0, 0);
+ break;
+ }
ret = state->set_param_save(fe);
if (ret < 0)
return ret;
- target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
- dib8000_set_wbd_ref(fe, target);
+ if (fe->dtv_property_cache.bandwidth_hz != 6000000) {
+ deb_info("only 6MHz bandwidth is supported\n");
+ return -EINVAL;
+ }
+ /** Update PLL if needed ratio **/
+ dib8000_update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
+
+ /** Get optimize PLL ratio to remove spurious **/
+ pll_ratio = dib8090_compute_pll_parameters(fe);
+ if (pll_ratio == 17)
+ timf = 21387946;
+ else if (pll_ratio == 18)
+ timf = 20199727;
+ else if (pll_ratio == 19)
+ timf = 19136583;
+ else
+ timf = 18179756;
+
+ /** Update ratio **/
+ dib8000_update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
+
+ dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, timf);
+
+ if (band != BAND_CBAND) {
+ /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */
+ target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2;
+ dib8000_set_wbd_ref(fe, target);
+ }
if (band == BAND_CBAND) {
deb_info("tuning in CBAND - soft-AGC startup\n");
dib0090_set_tune_state(fe, CT_AGC_START);
+
do {
ret = dib0090_gain_control(fe);
msleep(ret);
dib8000_set_gpio(fe, 6, 0, 1);
else if (tune_state == CT_AGC_STEP_1) {
dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain);
- if (rf_gain_limit == 0)
+ if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */
dib8000_set_gpio(fe, 6, 0, 0);
}
} while (tune_state < CT_AGC_STOP);
+
+ deb_info("switching to PWM AGC\n");
dib0090_pwm_gain_reset(fe);
dib8000_pwm_agc_reset(fe);
dib8000_set_tune_state(fe, CT_DEMOD_START);
} else {
+ /* for everything else than CBAND we are using standard AGC */
deb_info("not tuning in CBAND - standard AGC startup\n");
dib0090_pwm_gain_reset(fe);
}
u32 pll_prediv; /* New loopdiv */
};
-struct dibx090p_adc dib8090p_adc_tab[] = {
- { 50000, 17043521, 16, 3}, /* 64 MHz */
- {878000, 20199729, 9, 1}, /* 60 MHz */
- {0xffffffff, 0, 0, 0}, /* 60 MHz */
+struct dibx090p_best_adc {
+ u32 timf;
+ u32 pll_loopdiv;
+ u32 pll_prediv;
};
+static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc)
+{
+ u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
+ u16 xtal = 12000;
+ u16 fcp_min = 1900; /* PLL, Minimum Frequency of phase comparator (KHz) */
+ u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */
+ u32 fmem_max = 140000; /* 140MHz max SDRAM freq */
+ u32 fdem_min = 66000;
+ u32 fcp = 0, fs = 0, fdem = 0, fmem = 0;
+ u32 harmonic_id = 0;
+
+ adc->timf = 0;
+ adc->pll_loopdiv = loopdiv;
+ adc->pll_prediv = prediv;
+
+ deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz);
+
+ /* Find Min and Max prediv */
+ while ((xtal / max_prediv) >= fcp_min)
+ max_prediv++;
+
+ max_prediv--;
+ min_prediv = max_prediv;
+ while ((xtal / min_prediv) <= fcp_max) {
+ min_prediv--;
+ if (min_prediv == 1)
+ break;
+ }
+ deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv);
+
+ min_prediv = 1;
+
+ for (prediv = min_prediv; prediv < max_prediv; prediv++) {
+ fcp = xtal / prediv;
+ if (fcp > fcp_min && fcp < fcp_max) {
+ for (loopdiv = 1; loopdiv < 64; loopdiv++) {
+ fmem = ((xtal/prediv) * loopdiv);
+ fdem = fmem / 2;
+ fs = fdem / 4;
+
+ /* test min/max system restrictions */
+ if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) {
+ spur = 0;
+ /* test fs harmonics positions */
+ for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs)); harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) {
+ if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) && ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) {
+ spur = 1;
+ break;
+ }
+ }
+
+ if (!spur) {
+ adc->pll_loopdiv = loopdiv;
+ adc->pll_prediv = prediv;
+ adc->timf = (4260880253U / fdem) * (1 << 8);
+ adc->timf += ((4260880253U % fdem) << 8) / fdem;
+
+ deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf);
+ break;
+ }
+ }
+ }
+ }
+ if (!spur)
+ break;
+ }
+
+ if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0)
+ return -EINVAL;
+ return 0;
+}
+
static int dib8096p_agc_startup(struct dvb_frontend *fe)
{
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dib0700_adapter_state *state = adap->priv;
struct dibx000_bandwidth_config pll;
+ struct dibx090p_best_adc adc;
u16 target;
- int better_sampling_freq = 0, ret;
- struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0];
+ int ret;
ret = state->set_param_save(fe);
if (ret < 0)
target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
dib8000_set_wbd_ref(fe, target);
+ if (dib8096p_get_best_sampling(fe, &adc) == 0) {
+ pll.pll_ratio = adc.pll_loopdiv;
+ pll.pll_prediv = adc.pll_prediv;
- while (p->frequency / 1000 > adc_table->freq) {
- better_sampling_freq = 1;
- adc_table++;
- }
-
- if ((adc_table->freq != 0xffffffff) && better_sampling_freq) {
- pll.pll_ratio = adc_table->pll_loopdiv;
- pll.pll_prediv = adc_table->pll_prediv;
+ dib0700_set_i2c_speed(adap->dev, 200);
dib8000_update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
- dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc_table->timf);
+ dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf);
+ dib0700_set_i2c_speed(adap->dev, 1000);
}
return 0;
}
static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
{
+ struct dib0700_state *st = adap->dev->priv;
+ u32 fw_version;
+
+ dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL);
+ if (fw_version >= 0x10200)
+ st->fw_use_new_i2c_api = 1;
+
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(20);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
}
/* NIM7090 */
-struct dib7090p_best_adc {
- u32 timf;
- u32 pll_loopdiv;
- u32 pll_prediv;
-};
-
-static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dib7090p_best_adc *adc)
+static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc)
{
u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1;
struct dib0700_adapter_state *state = adap->priv;
struct dibx000_bandwidth_config pll;
u16 target;
- struct dib7090p_best_adc adc;
+ struct dibx090p_best_adc adc;
int ret;
ret = state->set_param_save(fe);
projects / karo-tx-linux.git / commitdiff