]> git.karo-electronics.de Git - linux-beck.git/commitdiff
mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver
authorRaymond Tan <raymond.tan@intel.com>
Mon, 2 Feb 2015 02:52:51 +0000 (10:52 +0800)
committerLee Jones <lee.jones@linaro.org>
Thu, 12 Mar 2015 09:07:17 +0000 (09:07 +0000)
In Quark X1000, there's a single PCI device that provides both
an I2C controller and a GPIO controller. This MFD driver will
split the 2 devices for their respective drivers.

This patch is based on Josef Ahmad's initial work for Quark enabling.

Acked-by: Michael Turquette <mturquette@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
drivers/mfd/Kconfig
drivers/mfd/Makefile
drivers/mfd/intel_quark_i2c_gpio.c [new file with mode: 0644]

index f49f404c2004a108d7c2c909e44acba28e339149..b277f37ae3bef5704b5a0a3de3d21be8d87a186d 100644 (file)
@@ -283,6 +283,18 @@ config HTC_I2CPLD
          This device provides input and output GPIOs through an I2C
          interface to one or more sub-chips.
 
+config MFD_INTEL_QUARK_I2C_GPIO
+       tristate "Intel Quark MFD I2C GPIO"
+       depends on PCI
+       depends on X86
+       depends on COMMON_CLK
+       select MFD_CORE
+       help
+         This MFD provides support for I2C and GPIO that exist only
+         in a single PCI device. It splits the 2 IO devices to
+         their respective IO driver.
+         The GPIO exports a total amount of 8 interrupt-capable GPIOs.
+
 config LPC_ICH
        tristate "Intel ICH LPC"
        depends on PCI
index 234998d77d4305f2e18089e08828a5c6d8766a76..5ebe443b595a951a47938a829f25e7a1ca54cdb6 100644 (file)
@@ -139,6 +139,7 @@ obj-$(CONFIG_AB8500_CORE)   += ab8500-core.o ab8500-sysctrl.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)     += adp5520.o
 obj-$(CONFIG_MFD_KEMPLD)       += kempld-core.o
+obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o
 obj-$(CONFIG_LPC_SCH)          += lpc_sch.o
 obj-$(CONFIG_LPC_ICH)          += lpc_ich.o
 obj-$(CONFIG_MFD_RDC321X)      += rdc321x-southbridge.o
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
new file mode 100644 (file)
index 0000000..006f2a1
--- /dev/null
@@ -0,0 +1,277 @@
+/*
+ * Intel Quark MFD PCI driver for I2C & GPIO
+ *
+ * Copyright(c) 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * Intel Quark PCI device for I2C and GPIO controller sharing the same
+ * PCI function. This PCI driver will split the 2 devices into their
+ * respective drivers.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/mfd/core.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/dmi.h>
+#include <linux/platform_data/gpio-dwapb.h>
+#include <linux/platform_data/i2c-designware.h>
+
+/* PCI BAR for register base address */
+#define MFD_I2C_BAR            0
+#define MFD_GPIO_BAR           1
+
+/* The base GPIO number under GPIOLIB framework */
+#define INTEL_QUARK_MFD_GPIO_BASE      8
+
+/* The default number of South-Cluster GPIO on Quark. */
+#define INTEL_QUARK_MFD_NGPIO          8
+
+/* The DesignWare GPIO ports on Quark. */
+#define INTEL_QUARK_GPIO_NPORTS        1
+
+#define INTEL_QUARK_IORES_MEM  0
+#define INTEL_QUARK_IORES_IRQ  1
+
+#define INTEL_QUARK_I2C_CONTROLLER_CLK "i2c_designware.0"
+
+/* The Quark I2C controller source clock */
+#define INTEL_QUARK_I2C_CLK_HZ 33000000
+
+#define INTEL_QUARK_I2C_NCLK   1
+
+struct intel_quark_mfd {
+       struct pci_dev          *pdev;
+       struct clk              *i2c_clk;
+       struct clk_lookup       *i2c_clk_lookup;
+};
+
+struct i2c_mode_info {
+       const char *name;
+       unsigned int i2c_scl_freq;
+};
+
+static const struct i2c_mode_info platform_i2c_mode_info[] = {
+       {
+               .name = "Galileo",
+               .i2c_scl_freq = 100000,
+       },
+       {
+               .name = "GalileoGen2",
+               .i2c_scl_freq = 400000,
+       },
+};
+
+static struct resource intel_quark_i2c_res[] = {
+       [INTEL_QUARK_IORES_MEM] = {
+               .flags = IORESOURCE_MEM,
+       },
+       [INTEL_QUARK_IORES_IRQ] = {
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource intel_quark_gpio_res[] = {
+       [INTEL_QUARK_IORES_MEM] = {
+               .flags = IORESOURCE_MEM,
+       },
+};
+
+static struct mfd_cell intel_quark_mfd_cells[] = {
+       {
+               .id = MFD_I2C_BAR,
+               .name = "i2c_designware",
+               .num_resources = ARRAY_SIZE(intel_quark_i2c_res),
+               .resources = intel_quark_i2c_res,
+               .ignore_resource_conflicts = true,
+       },
+       {
+               .id = MFD_GPIO_BAR,
+               .name = "gpio-dwapb",
+               .num_resources = ARRAY_SIZE(intel_quark_gpio_res),
+               .resources = intel_quark_gpio_res,
+               .ignore_resource_conflicts = true,
+       },
+};
+
+static const struct pci_device_id intel_quark_mfd_ids[] = {
+       { PCI_VDEVICE(INTEL, 0x0934), },
+       {},
+};
+MODULE_DEVICE_TABLE(pci, intel_quark_mfd_ids);
+
+static int intel_quark_register_i2c_clk(struct intel_quark_mfd *quark_mfd)
+{
+       struct pci_dev *pdev = quark_mfd->pdev;
+       struct clk_lookup *i2c_clk_lookup;
+       struct clk *i2c_clk;
+       int ret;
+
+       i2c_clk_lookup = devm_kcalloc(&pdev->dev, INTEL_QUARK_I2C_NCLK,
+                                     sizeof(*i2c_clk_lookup), GFP_KERNEL);
+       if (!i2c_clk_lookup)
+               return -ENOMEM;
+
+       i2c_clk_lookup[0].dev_id = INTEL_QUARK_I2C_CONTROLLER_CLK;
+
+       i2c_clk = clk_register_fixed_rate(&pdev->dev,
+                                         INTEL_QUARK_I2C_CONTROLLER_CLK, NULL,
+                                         CLK_IS_ROOT, INTEL_QUARK_I2C_CLK_HZ);
+
+       quark_mfd->i2c_clk_lookup = i2c_clk_lookup;
+       quark_mfd->i2c_clk = i2c_clk;
+
+       ret = clk_register_clkdevs(i2c_clk, i2c_clk_lookup,
+                                  INTEL_QUARK_I2C_NCLK);
+       if (ret)
+               dev_err(&pdev->dev, "Fixed clk register failed: %d\n", ret);
+
+       return ret;
+}
+
+static void intel_quark_unregister_i2c_clk(struct pci_dev *pdev)
+{
+       struct intel_quark_mfd *quark_mfd = dev_get_drvdata(&pdev->dev);
+
+       if (!quark_mfd->i2c_clk || !quark_mfd->i2c_clk_lookup)
+               return;
+
+       clkdev_drop(quark_mfd->i2c_clk_lookup);
+       clk_unregister(quark_mfd->i2c_clk);
+}
+
+static int intel_quark_i2c_setup(struct pci_dev *pdev, struct mfd_cell *cell)
+{
+       const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+       struct dw_i2c_platform_data *pdata;
+       struct resource *res = (struct resource *)cell->resources;
+       struct device *dev = &pdev->dev;
+       unsigned int i;
+
+       res[INTEL_QUARK_IORES_MEM].start =
+               pci_resource_start(pdev, MFD_I2C_BAR);
+       res[INTEL_QUARK_IORES_MEM].end =
+               pci_resource_end(pdev, MFD_I2C_BAR);
+
+       res[INTEL_QUARK_IORES_IRQ].start = pdev->irq;
+       res[INTEL_QUARK_IORES_IRQ].end = pdev->irq;
+
+       pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+       if (!pdata)
+               return -ENOMEM;
+
+       /* Fast mode by default */
+       pdata->i2c_scl_freq = 400000;
+
+       for (i = 0; i < ARRAY_SIZE(platform_i2c_mode_info); i++)
+               if (!strcmp(board_name, platform_i2c_mode_info[i].name))
+                       pdata->i2c_scl_freq
+                               = platform_i2c_mode_info[i].i2c_scl_freq;
+
+       cell->platform_data = pdata;
+       cell->pdata_size = sizeof(*pdata);
+
+       return 0;
+}
+
+static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
+{
+       struct dwapb_platform_data *pdata;
+       struct resource *res = (struct resource *)cell->resources;
+       struct device *dev = &pdev->dev;
+
+       res[INTEL_QUARK_IORES_MEM].start =
+               pci_resource_start(pdev, MFD_GPIO_BAR);
+       res[INTEL_QUARK_IORES_MEM].end =
+               pci_resource_end(pdev, MFD_GPIO_BAR);
+
+       pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+       if (!pdata)
+               return -ENOMEM;
+
+       /* For intel quark x1000, it has only one port: portA */
+       pdata->nports = INTEL_QUARK_GPIO_NPORTS;
+       pdata->properties = devm_kcalloc(dev, pdata->nports,
+                                        sizeof(*pdata->properties),
+                                        GFP_KERNEL);
+       if (!pdata->properties)
+               return -ENOMEM;
+
+       /* Set the properties for portA */
+       pdata->properties->node         = NULL;
+       pdata->properties->name         = "intel-quark-x1000-gpio-portA";
+       pdata->properties->idx          = 0;
+       pdata->properties->ngpio        = INTEL_QUARK_MFD_NGPIO;
+       pdata->properties->gpio_base    = INTEL_QUARK_MFD_GPIO_BASE;
+       pdata->properties->irq          = pdev->irq;
+       pdata->properties->irq_shared   = true;
+
+       cell->platform_data = pdata;
+       cell->pdata_size = sizeof(*pdata);
+
+       return 0;
+}
+
+static int intel_quark_mfd_probe(struct pci_dev *pdev,
+                                const struct pci_device_id *id)
+{
+       struct intel_quark_mfd *quark_mfd;
+       int ret;
+
+       ret = pcim_enable_device(pdev);
+       if (ret)
+               return ret;
+
+       quark_mfd = devm_kzalloc(&pdev->dev, sizeof(*quark_mfd), GFP_KERNEL);
+       if (!quark_mfd)
+               return -ENOMEM;
+       quark_mfd->pdev = pdev;
+
+       ret = intel_quark_register_i2c_clk(quark_mfd);
+       if (ret)
+               return ret;
+
+       dev_set_drvdata(&pdev->dev, quark_mfd);
+
+       ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[MFD_I2C_BAR]);
+       if (ret)
+               return ret;
+
+       ret = intel_quark_gpio_setup(pdev,
+                                    &intel_quark_mfd_cells[MFD_GPIO_BAR]);
+       if (ret)
+               return ret;
+
+       return mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells,
+                              ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0,
+                              NULL);
+}
+
+static void intel_quark_mfd_remove(struct pci_dev *pdev)
+{
+       intel_quark_unregister_i2c_clk(pdev);
+       mfd_remove_devices(&pdev->dev);
+}
+
+static struct pci_driver intel_quark_mfd_driver = {
+       .name           = "intel_quark_mfd_i2c_gpio",
+       .id_table       = intel_quark_mfd_ids,
+       .probe          = intel_quark_mfd_probe,
+       .remove         = intel_quark_mfd_remove,
+};
+
+module_pci_driver(intel_quark_mfd_driver);
+
+MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>");
+MODULE_DESCRIPTION("Intel Quark MFD PCI driver for I2C & GPIO");
+MODULE_LICENSE("GPL v2");