dev_info(&intf->dev, "comedi_: disconnected from the usb\n");
}
-/* is called when comedi-config is called */
-static int usbduxsigma_attach(struct comedi_device *dev,
- struct comedi_devconfig *it)
+/* common part of attach and attach_usb */
+static int usbduxsigma_attach_common(struct comedi_device *dev,
+ struct usbduxsub *uds,
+ void *aux_data, int aux_len)
{
int ret;
- int index;
- int i;
- struct usbduxsub *udev;
+ struct comedi_subdevice *s;
int n_subdevs;
-
int offset;
- struct comedi_subdevice *s = NULL;
- dev->private = NULL;
-
- down(&start_stop_sem);
- /* find a valid device which has been detected by the probe function of
- * the usb */
- index = -1;
- for (i = 0; i < NUMUSBDUX; i++) {
- if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
- index = i;
- break;
- }
- }
-
- if (index < 0) {
- printk(KERN_ERR "comedi%d: usbduxsigma: error: attach failed,"
- "dev not connected to the usb bus.\n", dev->minor);
- up(&start_stop_sem);
- return -ENODEV;
- }
-
- udev = &usbduxsub[index];
- down(&udev->sem);
+ down(&uds->sem);
/* pointer back to the corresponding comedi device */
- udev->comedidev = dev;
-
+ uds->comedidev = dev;
/* trying to upload the firmware into the FX2 */
- if (comedi_aux_data(it->options, 0) &&
- it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
- firmwareUpload(udev, comedi_aux_data(it->options, 0),
- it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
- }
-
+ if (aux_data)
+ firmwareUpload(uds, aux_data, aux_len);
dev->board_name = BOARDNAME;
-
/* set number of subdevices */
- if (udev->high_speed) {
- /* with pwm */
- n_subdevs = 4;
- } else {
- /* without pwm */
- n_subdevs = 3;
- }
-
+ if (uds->high_speed)
+ n_subdevs = 4; /* with pwm */
+ else
+ n_subdevs = 3; /* without pwm */
ret = comedi_alloc_subdevices(dev, n_subdevs);
if (ret) {
- up(&udev->sem);
- up(&start_stop_sem);
+ up(&uds->sem);
return ret;
}
-
/* private structure is also simply the usb-structure */
- dev->private = udev;
-
+ dev->private = uds;
/* the first subdevice is the A/D converter */
s = dev->subdevices + SUBDEV_AD;
/* the URBs get the comedi subdevice */
s->maxdata = 0x00FFFFFF;
/* range table to convert to physical units */
s->range_table = (&range_usbdux_ai_range);
-
- /* analog out */
+ /* analog output subdevice */
s = dev->subdevices + SUBDEV_DA;
/* analog out */
s->type = COMEDI_SUBD_AO;
s->cancel = usbdux_ao_cancel;
s->insn_read = usbdux_ao_insn_read;
s->insn_write = usbdux_ao_insn_write;
-
- /* digital I/O */
+ /* digital I/O subdevice */
s = dev->subdevices + SUBDEV_DIO;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->insn_config = usbdux_dio_insn_config;
/* we don't use it */
s->private = NULL;
-
- if (udev->high_speed) {
- /* timer / pwm */
+ if (uds->high_speed) {
+ /* timer / pwm subdevice */
s = dev->subdevices + SUBDEV_PWM;
s->type = COMEDI_SUBD_PWM;
s->subdev_flags = SDF_WRITABLE | SDF_PWM_HBRIDGE;
s->n_chan = 8;
/* this defines the max duty cycle resolution */
- s->maxdata = udev->sizePwmBuf;
+ s->maxdata = uds->sizePwmBuf;
s->insn_write = usbdux_pwm_write;
s->insn_read = usbdux_pwm_read;
s->insn_config = usbdux_pwm_config;
usbdux_pwm_period(dev, s, PWM_DEFAULT_PERIOD);
}
/* finally decide that it's attached */
- udev->attached = 1;
+ uds->attached = 1;
+ up(&uds->sem);
+ offset = usbdux_getstatusinfo(dev, 0);
+ if (offset < 0)
+ dev_err(&uds->interface->dev,
+ "Communication to USBDUXSIGMA failed! Check firmware and cabling.");
+ dev_info(&uds->interface->dev,
+ "comedi%d: attached, ADC_zero = %x\n", dev->minor, offset);
+ return 0;
+}
- up(&udev->sem);
+/* is called for COMEDI_DEVCONFIG ioctl (when comedi_config is run) */
+static int usbduxsigma_attach(struct comedi_device *dev,
+ struct comedi_devconfig *it)
+{
+ int ret;
+ int index;
+ int i;
+ void *aux_data;
+ int aux_len;
- up(&start_stop_sem);
+ dev->private = NULL;
- offset = usbdux_getstatusinfo(dev, 0);
- if (offset < 0)
- dev_err(&udev->interface->dev,
- "Communication to USBDUXSIGMA failed!"
- "Check firmware and cabling.");
+ aux_data = comedi_aux_data(it->options, 0);
+ aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH];
+ if (aux_data == NULL)
+ aux_len = 0;
+ else if (aux_len == 0)
+ aux_data = NULL;
- dev_info(&udev->interface->dev,
- "comedi%d: attached, ADC_zero = %x", dev->minor, offset);
+ down(&start_stop_sem);
+ /* find a valid device which has been detected by the probe function of
+ * the usb */
+ index = -1;
+ for (i = 0; i < NUMUSBDUX; i++) {
+ if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
+ index = i;
+ break;
+ }
+ }
+ if (index < 0) {
+ dev_err(dev->class_dev,
+ "usbduxsigma: error: attach failed, dev not connected to the usb bus.\n");
+ up(&start_stop_sem);
+ ret = -ENODEV;
+ } else
+ ret = usbduxsigma_attach_common(dev, &usbduxsub[index],
+ aux_data, aux_len);
+ up(&start_stop_sem);
+ return ret;
+}
- return 0;
+/* is called from comedi_usb_auto_config() */
+static int usbduxsigma_attach_usb(struct comedi_device *dev,
+ struct usb_interface *uinterf)
+{
+ int ret;
+ struct usbduxsub *uds;
+
+ dev->private = NULL;
+ down(&start_stop_sem);
+ uds = usb_get_intfdata(uinterf);
+ if (!uds || !uds->probed) {
+ dev_err(dev->class_dev,
+ "usbduxsigma: error: attach_usb failed, not connected\n");
+ ret = -ENODEV;
+ } else if (uds->attached) {
+ dev_err(dev->class_dev,
+ "usbduxsigma: error: attach_usb failed, already attached\n");
+ ret = -ENODEV;
+ } else
+ ret = usbduxsigma_attach_common(dev, uds, NULL, 0);
+ up(&start_stop_sem);
+ return ret;
}
static void usbduxsigma_detach(struct comedi_device *dev)
.module = THIS_MODULE,
.attach = usbduxsigma_attach,
.detach = usbduxsigma_detach,
+ .attach_usb = usbduxsigma_attach_usb,
};
/* Table with the USB-devices */
projects / linux-beck.git / commitdiff