--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _HAL_INIT_C_
+
+#include <drv_types.h>
+#include <rtw_efuse.h>
+
+#include <rtl8188e_hal.h>
+
+#include <rtw_iol.h>
+
+#include <usb_ops.h>
+
+static void iol_mode_enable(struct adapter *padapter, u8 enable)
+{
+ u8 reg_0xf0 = 0;
+
+ if (enable) {
+ /* Enable initial offload */
+ reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
+ rtw_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN);
+
+ if (!padapter->bFWReady) {
+ DBG_88E("bFWReady == false call reset 8051...\n");
+ _8051Reset88E(padapter);
+ }
+
+ } else {
+ /* disable initial offload */
+ reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
+ rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN);
+ }
+}
+
+static s32 iol_execute(struct adapter *padapter, u8 control)
+{
+ s32 status = _FAIL;
+ u8 reg_0x88 = 0;
+ u32 start = 0, passing_time = 0;
+
+ control = control&0x0f;
+ reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0);
+ rtw_write8(padapter, REG_HMEBOX_E0, reg_0x88|control);
+
+ start = rtw_get_current_time();
+ while ((reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0)) & control &&
+ (passing_time = rtw_get_passing_time_ms(start)) < 1000) {
+ ;
+ }
+
+ reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0);
+ status = (reg_0x88 & control) ? _FAIL : _SUCCESS;
+ if (reg_0x88 & control<<4)
+ status = _FAIL;
+ return status;
+}
+
+static s32 iol_InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy)
+{
+ s32 rst = _SUCCESS;
+ iol_mode_enable(padapter, 1);
+ rtw_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
+ rst = iol_execute(padapter, CMD_INIT_LLT);
+ iol_mode_enable(padapter, 0);
+ return rst;
+}
+
+static void
+efuse_phymap_to_logical(u8 *phymap, u16 _offset, u16 _size_byte, u8 *pbuf)
+{
+ u8 *efuseTbl = NULL;
+ u8 rtemp8;
+ u16 eFuse_Addr = 0;
+ u8 offset, wren;
+ u16 i, j;
+ u16 **eFuseWord = NULL;
+ u16 efuse_utilized = 0;
+ u8 u1temp = 0;
+
+ efuseTbl = (u8 *)rtw_zmalloc(EFUSE_MAP_LEN_88E);
+ if (efuseTbl == NULL) {
+ DBG_88E("%s: alloc efuseTbl fail!\n", __func__);
+ goto exit;
+ }
+
+ eFuseWord = (u16 **)rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16));
+ if (eFuseWord == NULL) {
+ DBG_88E("%s: alloc eFuseWord fail!\n", __func__);
+ goto exit;
+ }
+
+ /* 0. Refresh efuse init map as all oxFF. */
+ for (i = 0; i < EFUSE_MAX_SECTION_88E; i++)
+ for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
+ eFuseWord[i][j] = 0xFFFF;
+
+ /* */
+ /* 1. Read the first byte to check if efuse is empty!!! */
+ /* */
+ /* */
+ rtemp8 = *(phymap+eFuse_Addr);
+ if (rtemp8 != 0xFF) {
+ efuse_utilized++;
+ eFuse_Addr++;
+ } else {
+ DBG_88E("EFUSE is empty efuse_Addr-%d efuse_data =%x\n", eFuse_Addr, rtemp8);
+ goto exit;
+ }
+
+ /* */
+ /* 2. Read real efuse content. Filter PG header and every section data. */
+ /* */
+ while ((rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) {
+ /* Check PG header for section num. */
+ if ((rtemp8 & 0x1F) == 0x0F) { /* extended header */
+ u1temp = ((rtemp8 & 0xE0) >> 5);
+ rtemp8 = *(phymap+eFuse_Addr);
+ if ((rtemp8 & 0x0F) == 0x0F) {
+ eFuse_Addr++;
+ rtemp8 = *(phymap+eFuse_Addr);
+
+ if (rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E))
+ eFuse_Addr++;
+ continue;
+ } else {
+ offset = ((rtemp8 & 0xF0) >> 1) | u1temp;
+ wren = (rtemp8 & 0x0F);
+ eFuse_Addr++;
+ }
+ } else {
+ offset = ((rtemp8 >> 4) & 0x0f);
+ wren = (rtemp8 & 0x0f);
+ }
+
+ if (offset < EFUSE_MAX_SECTION_88E) {
+ /* Get word enable value from PG header */
+ for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
+ /* Check word enable condition in the section */
+ if (!(wren & 0x01)) {
+ rtemp8 = *(phymap+eFuse_Addr);
+ eFuse_Addr++;
+ efuse_utilized++;
+ eFuseWord[offset][i] = (rtemp8 & 0xff);
+ if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E)
+ break;
+ rtemp8 = *(phymap+eFuse_Addr);
+ eFuse_Addr++;
+ efuse_utilized++;
+ eFuseWord[offset][i] |= (((u16)rtemp8 << 8) & 0xff00);
+
+ if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E)
+ break;
+ }
+ wren >>= 1;
+ }
+ }
+ /* Read next PG header */
+ rtemp8 = *(phymap+eFuse_Addr);
+
+ if (rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) {
+ efuse_utilized++;
+ eFuse_Addr++;
+ }
+ }
+
+ /* */
+ /* 3. Collect 16 sections and 4 word unit into Efuse map. */
+ /* */
+ for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) {
+ for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) {
+ efuseTbl[(i*8)+(j*2)] = (eFuseWord[i][j] & 0xff);
+ efuseTbl[(i*8)+((j*2)+1)] = ((eFuseWord[i][j] >> 8) & 0xff);
+ }
+ }
+
+ /* */
+ /* 4. Copy from Efuse map to output pointer memory!!! */
+ /* */
+ for (i = 0; i < _size_byte; i++)
+ pbuf[i] = efuseTbl[_offset+i];
+
+ /* */
+ /* 5. Calculate Efuse utilization. */
+ /* */
+
+exit:
+ kfree(efuseTbl);
+
+ if (eFuseWord)
+ rtw_mfree2d((void *)eFuseWord, EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16));
+}
+
+static void efuse_read_phymap_from_txpktbuf(
+ struct adapter *adapter,
+ int bcnhead, /* beacon head, where FW store len(2-byte) and efuse physical map. */
+ u8 *content, /* buffer to store efuse physical map */
+ u16 *size /* for efuse content: the max byte to read. will update to byte read */
+ )
+{
+ u16 dbg_addr = 0;
+ u32 start = 0, passing_time = 0;
+ u8 reg_0x143 = 0;
+ u32 lo32 = 0, hi32 = 0;
+ u16 len = 0, count = 0;
+ int i = 0;
+ u16 limit = *size;
+
+ u8 *pos = content;
+
+ if (bcnhead < 0) /* if not valid */
+ bcnhead = rtw_read8(adapter, REG_TDECTRL+1);
+
+ DBG_88E("%s bcnhead:%d\n", __func__, bcnhead);
+
+ rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
+
+ dbg_addr = bcnhead*128/8; /* 8-bytes addressing */
+
+ while (1) {
+ rtw_write16(adapter, REG_PKTBUF_DBG_ADDR, dbg_addr+i);
+
+ rtw_write8(adapter, REG_TXPKTBUF_DBG, 0);
+ start = rtw_get_current_time();
+ while (!(reg_0x143 = rtw_read8(adapter, REG_TXPKTBUF_DBG)) &&
+ (passing_time = rtw_get_passing_time_ms(start)) < 1000) {
+ DBG_88E("%s polling reg_0x143:0x%02x, reg_0x106:0x%02x\n", __func__, reg_0x143, rtw_read8(adapter, 0x106));
+ rtw_usleep_os(100);
+ }
+
+ lo32 = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_L);
+ hi32 = rtw_read32(adapter, REG_PKTBUF_DBG_DATA_H);
+
+ if (i == 0) {
+ u8 lenc[2];
+ u16 lenbak, aaabak;
+ u16 aaa;
+ lenc[0] = rtw_read8(adapter, REG_PKTBUF_DBG_DATA_L);
+ lenc[1] = rtw_read8(adapter, REG_PKTBUF_DBG_DATA_L+1);
+
+ aaabak = le16_to_cpup((__le16 *)lenc);
+ lenbak = le16_to_cpu(*((__le16 *)lenc));
+ aaa = le16_to_cpup((__le16 *)&lo32);
+ len = le16_to_cpu(*((__le16 *)&lo32));
+
+ limit = (len-2 < limit) ? len-2 : limit;
+
+ DBG_88E("%s len:%u, lenbak:%u, aaa:%u, aaabak:%u\n", __func__, len, lenbak, aaa, aaabak);
+
+ memcpy(pos, ((u8 *)&lo32)+2, (limit >= count+2) ? 2 : limit-count);
+ count += (limit >= count+2) ? 2 : limit-count;
+ pos = content+count;
+
+ } else {
+ memcpy(pos, ((u8 *)&lo32), (limit >= count+4) ? 4 : limit-count);
+ count += (limit >= count+4) ? 4 : limit-count;
+ pos = content+count;
+ }
+
+ if (limit > count && len-2 > count) {
+ memcpy(pos, (u8 *)&hi32, (limit >= count+4) ? 4 : limit-count);
+ count += (limit >= count+4) ? 4 : limit-count;
+ pos = content+count;
+ }
+
+ if (limit <= count || len-2 <= count)
+ break;
+ i++;
+ }
+ rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, DISABLE_TRXPKT_BUF_ACCESS);
+ DBG_88E("%s read count:%u\n", __func__, count);
+ *size = count;
+}
+
+static s32 iol_read_efuse(struct adapter *padapter, u8 txpktbuf_bndy, u16 offset, u16 size_byte, u8 *logical_map)
+{
+ s32 status = _FAIL;
+ u8 physical_map[512];
+ u16 size = 512;
+
+ rtw_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
+ _rtw_memset(physical_map, 0xFF, 512);
+ rtw_write8(padapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
+ status = iol_execute(padapter, CMD_READ_EFUSE_MAP);
+ if (status == _SUCCESS)
+ efuse_read_phymap_from_txpktbuf(padapter, txpktbuf_bndy, physical_map, &size);
+ efuse_phymap_to_logical(physical_map, offset, size_byte, logical_map);
+ return status;
+}
+
+s32 rtl8188e_iol_efuse_patch(struct adapter *padapter)
+{
+ s32 result = _SUCCESS;
+
+ DBG_88E("==> %s\n", __func__);
+ if (rtw_IOL_applied(padapter)) {
+ iol_mode_enable(padapter, 1);
+ result = iol_execute(padapter, CMD_READ_EFUSE_MAP);
+ if (result == _SUCCESS)
+ result = iol_execute(padapter, CMD_EFUSE_PATCH);
+
+ iol_mode_enable(padapter, 0);
+ }
+ return result;
+}
+
+static s32 iol_ioconfig(struct adapter *padapter, u8 iocfg_bndy)
+{
+ s32 rst = _SUCCESS;
+
+ rtw_write8(padapter, REG_TDECTRL+1, iocfg_bndy);
+ rst = iol_execute(padapter, CMD_IOCONFIG);
+ return rst;
+}
+
+static int rtl8188e_IOL_exec_cmds_sync(struct adapter *adapter, struct xmit_frame *xmit_frame, u32 max_wating_ms, u32 bndy_cnt)
+{
+ struct pkt_attrib *pattrib = &xmit_frame->attrib;
+ u8 i;
+ int ret = _FAIL;
+
+ if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS)
+ goto exit;
+ if (rtw_usb_bulk_size_boundary(adapter, TXDESC_SIZE+pattrib->last_txcmdsz)) {
+ if (rtw_IOL_append_END_cmd(xmit_frame) != _SUCCESS)
+ goto exit;
+ }
+
+ dump_mgntframe_and_wait(adapter, xmit_frame, max_wating_ms);
+
+ iol_mode_enable(adapter, 1);
+ for (i = 0; i < bndy_cnt; i++) {
+ u8 page_no = 0;
+ page_no = i*2;
+ ret = iol_ioconfig(adapter, page_no);
+ if (ret != _SUCCESS)
+ break;
+ }
+ iol_mode_enable(adapter, 0);
+exit:
+ /* restore BCN_HEAD */
+ rtw_write8(adapter, REG_TDECTRL+1, 0);
+ return ret;
+}
+
+void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter *Adapter, int data_len)
+{
+ u32 fifo_data, reg_140;
+ u32 addr, rstatus, loop = 0;
+ u16 data_cnts = (data_len/8)+1;
+ u8 *pbuf = rtw_zvmalloc(data_len+10);
+ DBG_88E("###### %s ######\n", __func__);
+
+ rtw_write8(Adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
+ if (pbuf) {
+ for (addr = 0; addr < data_cnts; addr++) {
+ rtw_write32(Adapter, 0x140, addr);
+ rtw_usleep_os(2);
+ loop = 0;
+ do {
+ rstatus = (reg_140 = rtw_read32(Adapter, REG_PKTBUF_DBG_CTRL)&BIT24);
+ if (rstatus) {
+ fifo_data = rtw_read32(Adapter, REG_PKTBUF_DBG_DATA_L);
+ memcpy(pbuf+(addr*8), &fifo_data, 4);
+
+ fifo_data = rtw_read32(Adapter, REG_PKTBUF_DBG_DATA_H);
+ memcpy(pbuf+(addr*8+4), &fifo_data, 4);
+ }
+ rtw_usleep_os(2);
+ } while (!rstatus && (loop++ < 10));
+ }
+ rtw_IOL_cmd_buf_dump(Adapter, data_len, pbuf);
+ rtw_vmfree(pbuf, data_len+10);
+ }
+ DBG_88E("###### %s ######\n", __func__);
+}
+
+static void _FWDownloadEnable(struct adapter *padapter, bool enable)
+{
+ u8 tmp;
+
+ if (enable) {
+ /* MCU firmware download enable. */
+ tmp = rtw_read8(padapter, REG_MCUFWDL);
+ rtw_write8(padapter, REG_MCUFWDL, tmp | 0x01);
+
+ /* 8051 reset */
+ tmp = rtw_read8(padapter, REG_MCUFWDL+2);
+ rtw_write8(padapter, REG_MCUFWDL+2, tmp&0xf7);
+ } else {
+ /* MCU firmware download disable. */
+ tmp = rtw_read8(padapter, REG_MCUFWDL);
+ rtw_write8(padapter, REG_MCUFWDL, tmp&0xfe);
+
+ /* Reserved for fw extension. */
+ rtw_write8(padapter, REG_MCUFWDL+1, 0x00);
+ }
+}
+
+#define MAX_REG_BOLCK_SIZE 196
+
+static int _BlockWrite(struct adapter *padapter, void *buffer, u32 buffSize)
+{
+ int ret = _SUCCESS;
+ u32 blockSize_p1 = 4; /* (Default) Phase #1 : PCI muse use 4-byte write to download FW */
+ u32 blockSize_p2 = 8; /* Phase #2 : Use 8-byte, if Phase#1 use big size to write FW. */
+ u32 blockSize_p3 = 1; /* Phase #3 : Use 1-byte, the remnant of FW image. */
+ u32 blockCount_p1 = 0, blockCount_p2 = 0, blockCount_p3 = 0;
+ u32 remainSize_p1 = 0, remainSize_p2 = 0;
+ u8 *bufferPtr = (u8 *)buffer;
+ u32 i = 0, offset = 0;
+
+ blockSize_p1 = MAX_REG_BOLCK_SIZE;
+
+ /* 3 Phase #1 */
+ blockCount_p1 = buffSize / blockSize_p1;
+ remainSize_p1 = buffSize % blockSize_p1;
+
+ if (blockCount_p1) {
+ RT_TRACE(_module_hal_init_c_, _drv_notice_,
+ ("_BlockWrite: [P1] buffSize(%d) blockSize_p1(%d) blockCount_p1(%d) remainSize_p1(%d)\n",
+ buffSize, blockSize_p1, blockCount_p1, remainSize_p1));
+ }
+
+ for (i = 0; i < blockCount_p1; i++) {
+ ret = rtw_writeN(padapter, (FW_8188E_START_ADDRESS + i * blockSize_p1), blockSize_p1, (bufferPtr + i * blockSize_p1));
+ if (ret == _FAIL)
+ goto exit;
+ }
+
+ /* 3 Phase #2 */
+ if (remainSize_p1) {
+ offset = blockCount_p1 * blockSize_p1;
+
+ blockCount_p2 = remainSize_p1/blockSize_p2;
+ remainSize_p2 = remainSize_p1%blockSize_p2;
+
+ if (blockCount_p2) {
+ RT_TRACE(_module_hal_init_c_, _drv_notice_,
+ ("_BlockWrite: [P2] buffSize_p2(%d) blockSize_p2(%d) blockCount_p2(%d) remainSize_p2(%d)\n",
+ (buffSize-offset), blockSize_p2 , blockCount_p2, remainSize_p2));
+ }
+
+ for (i = 0; i < blockCount_p2; i++) {
+ ret = rtw_writeN(padapter, (FW_8188E_START_ADDRESS + offset + i*blockSize_p2), blockSize_p2, (bufferPtr + offset + i*blockSize_p2));
+
+ if (ret == _FAIL)
+ goto exit;
+ }
+ }
+
+ /* 3 Phase #3 */
+ if (remainSize_p2) {
+ offset = (blockCount_p1 * blockSize_p1) + (blockCount_p2 * blockSize_p2);
+
+ blockCount_p3 = remainSize_p2 / blockSize_p3;
+
+ RT_TRACE(_module_hal_init_c_, _drv_notice_,
+ ("_BlockWrite: [P3] buffSize_p3(%d) blockSize_p3(%d) blockCount_p3(%d)\n",
+ (buffSize-offset), blockSize_p3, blockCount_p3));
+
+ for (i = 0; i < blockCount_p3; i++) {
+ ret = rtw_write8(padapter, (FW_8188E_START_ADDRESS + offset + i), *(bufferPtr + offset + i));
+
+ if (ret == _FAIL)
+ goto exit;
+ }
+ }
+
+exit:
+ return ret;
+}
+
+static int _PageWrite(struct adapter *padapter, u32 page, void *buffer, u32 size)
+{
+ u8 value8;
+ u8 u8Page = (u8)(page & 0x07);
+
+ value8 = (rtw_read8(padapter, REG_MCUFWDL+2) & 0xF8) | u8Page;
+ rtw_write8(padapter, REG_MCUFWDL+2, value8);
+
+ return _BlockWrite(padapter, buffer, size);
+}
+
+static int _WriteFW(struct adapter *padapter, void *buffer, u32 size)
+{
+ /* Since we need dynamic decide method of dwonload fw, so we call this function to get chip version. */
+ /* We can remove _ReadChipVersion from ReadpadapterInfo8192C later. */
+ int ret = _SUCCESS;
+ u32 pageNums, remainSize;
+ u32 page, offset;
+ u8 *bufferPtr = (u8 *)buffer;
+
+ pageNums = size / MAX_PAGE_SIZE;
+ remainSize = size % MAX_PAGE_SIZE;
+
+ for (page = 0; page < pageNums; page++) {
+ offset = page * MAX_PAGE_SIZE;
+ ret = _PageWrite(padapter, page, bufferPtr+offset, MAX_PAGE_SIZE);
+
+ if (ret == _FAIL)
+ goto exit;
+ }
+ if (remainSize) {
+ offset = pageNums * MAX_PAGE_SIZE;
+ page = pageNums;
+ ret = _PageWrite(padapter, page, bufferPtr+offset, remainSize);
+
+ if (ret == _FAIL)
+ goto exit;
+ }
+ RT_TRACE(_module_hal_init_c_, _drv_info_, ("_WriteFW Done- for Normal chip.\n"));
+exit:
+ return ret;
+}
+
+void _8051Reset88E(struct adapter *padapter)
+{
+ u8 u1bTmp;
+
+ u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
+ rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2));
+ rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2));
+ DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n");
+}
+
+static s32 _FWFreeToGo(struct adapter *padapter)
+{
+ u32 counter = 0;
+ u32 value32;
+
+ /* polling CheckSum report */
+ do {
+ value32 = rtw_read32(padapter, REG_MCUFWDL);
+ if (value32 & FWDL_ChkSum_rpt)
+ break;
+ } while (counter++ < POLLING_READY_TIMEOUT_COUNT);
+
+ if (counter >= POLLING_READY_TIMEOUT_COUNT) {
+ DBG_88E("%s: chksum report fail! REG_MCUFWDL:0x%08x\n", __func__, value32);
+ return _FAIL;
+ }
+ DBG_88E("%s: Checksum report OK! REG_MCUFWDL:0x%08x\n", __func__, value32);
+
+ value32 = rtw_read32(padapter, REG_MCUFWDL);
+ value32 |= MCUFWDL_RDY;
+ value32 &= ~WINTINI_RDY;
+ rtw_write32(padapter, REG_MCUFWDL, value32);
+
+ _8051Reset88E(padapter);
+
+ /* polling for FW ready */
+ counter = 0;
+ do {
+ value32 = rtw_read32(padapter, REG_MCUFWDL);
+ if (value32 & WINTINI_RDY) {
+ DBG_88E("%s: Polling FW ready success!! REG_MCUFWDL:0x%08x\n", __func__, value32);
+ return _SUCCESS;
+ }
+ rtw_udelay_os(5);
+ } while (counter++ < POLLING_READY_TIMEOUT_COUNT);
+
+ DBG_88E("%s: Polling FW ready fail!! REG_MCUFWDL:0x%08x\n", __func__, value32);
+ return _FAIL;
+}
+
+#define IS_FW_81xxC(padapter) (((GET_HAL_DATA(padapter))->FirmwareSignature & 0xFFF0) == 0x88C0)
+
+s32 rtl8188e_FirmwareDownload(struct adapter *padapter)
+{
+ s32 rtStatus = _SUCCESS;
+ u8 writeFW_retry = 0;
+ u32 fwdl_start_time;
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+
+ u8 *FwImage;
+ u32 FwImageLen;
+ struct rt_firmware *pFirmware = NULL;
+ struct rt_firmware_hdr *pFwHdr = NULL;
+ u8 *pFirmwareBuf;
+ u32 FirmwareLen;
+
+ RT_TRACE(_module_hal_init_c_, _drv_info_, ("+%s\n", __func__));
+ pFirmware = (struct rt_firmware *)rtw_zmalloc(sizeof(struct rt_firmware));
+ if (!pFirmware) {
+ rtStatus = _FAIL;
+ goto Exit;
+ }
+
+ FwImage = (u8 *)Rtl8188E_FwImageArray;
+ FwImageLen = Rtl8188E_FWImgArrayLength;
+
+ pFirmware->eFWSource = FW_SOURCE_HEADER_FILE;
+
+ switch (pFirmware->eFWSource) {
+ case FW_SOURCE_IMG_FILE:
+ break;
+ case FW_SOURCE_HEADER_FILE:
+ if (FwImageLen > FW_8188E_SIZE) {
+ rtStatus = _FAIL;
+ RT_TRACE(_module_hal_init_c_, _drv_err_, ("Firmware size exceed 0x%X. Check it.\n", FW_8188E_SIZE));
+ goto Exit;
+ }
+
+ pFirmware->szFwBuffer = FwImage;
+ pFirmware->ulFwLength = FwImageLen;
+ break;
+ }
+ pFirmwareBuf = pFirmware->szFwBuffer;
+ FirmwareLen = pFirmware->ulFwLength;
+ DBG_88E_LEVEL(_drv_info_, "+%s: !bUsedWoWLANFw, FmrmwareLen:%d+\n", __func__, FirmwareLen);
+
+ /* To Check Fw header. Added by tynli. 2009.12.04. */
+ pFwHdr = (struct rt_firmware_hdr *)pFirmware->szFwBuffer;
+
+ pHalData->FirmwareVersion = le16_to_cpu(pFwHdr->Version);
+ pHalData->FirmwareSubVersion = pFwHdr->Subversion;
+ pHalData->FirmwareSignature = le16_to_cpu(pFwHdr->Signature);
+
+ DBG_88E("%s: fw_ver =%d fw_subver =%d sig = 0x%x\n",
+ __func__, pHalData->FirmwareVersion, pHalData->FirmwareSubVersion, pHalData->FirmwareSignature);
+
+ if (IS_FW_HEADER_EXIST(pFwHdr)) {
+ /* Shift 32 bytes for FW header */
+ pFirmwareBuf = pFirmwareBuf + 32;
+ FirmwareLen = FirmwareLen - 32;
+ }
+
+ /* Suggested by Filen. If 8051 is running in RAM code, driver should inform Fw to reset by itself, */
+ /* or it will cause download Fw fail. 2010.02.01. by tynli. */
+ if (rtw_read8(padapter, REG_MCUFWDL) & RAM_DL_SEL) { /* 8051 RAM code */
+ rtw_write8(padapter, REG_MCUFWDL, 0x00);
+ _8051Reset88E(padapter);
+ }
+
+ _FWDownloadEnable(padapter, true);
+ fwdl_start_time = rtw_get_current_time();
+ while (1) {
+ /* reset the FWDL chksum */
+ rtw_write8(padapter, REG_MCUFWDL, rtw_read8(padapter, REG_MCUFWDL) | FWDL_ChkSum_rpt);
+
+ rtStatus = _WriteFW(padapter, pFirmwareBuf, FirmwareLen);
+
+ if (rtStatus == _SUCCESS ||
+ (rtw_get_passing_time_ms(fwdl_start_time) > 500 && writeFW_retry++ >= 3))
+ break;
+
+ DBG_88E("%s writeFW_retry:%u, time after fwdl_start_time:%ums\n",
+ __func__, writeFW_retry, rtw_get_passing_time_ms(fwdl_start_time)
+ );
+ }
+ _FWDownloadEnable(padapter, false);
+ if (_SUCCESS != rtStatus) {
+ DBG_88E("DL Firmware failed!\n");
+ goto Exit;
+ }
+
+ rtStatus = _FWFreeToGo(padapter);
+ if (_SUCCESS != rtStatus) {
+ DBG_88E("DL Firmware failed!\n");
+ goto Exit;
+ }
+ RT_TRACE(_module_hal_init_c_, _drv_info_, ("Firmware is ready to run!\n"));
+
+Exit:
+
+ kfree(pFirmware);
+ return rtStatus;
+}
+
+void rtl8188e_InitializeFirmwareVars(struct adapter *padapter)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+
+ /* Init Fw LPS related. */
+ padapter->pwrctrlpriv.bFwCurrentInPSMode = false;
+
+ /* Init H2C counter. by tynli. 2009.12.09. */
+ pHalData->LastHMEBoxNum = 0;
+}
+
+static void rtl8188e_free_hal_data(struct adapter *padapter)
+{
+_func_enter_;
+ kfree(padapter->HalData);
+ padapter->HalData = NULL;
+_func_exit_;
+}
+
+/* */
+/* Efuse related code */
+/* */
+enum{
+ VOLTAGE_V25 = 0x03,
+ LDOE25_SHIFT = 28 ,
+ };
+
+static bool
+hal_EfusePgPacketWrite2ByteHeader(
+ struct adapter *pAdapter,
+ u8 efuseType,
+ u16 *pAddr,
+ struct pgpkt *pTargetPkt,
+ bool bPseudoTest);
+static bool
+hal_EfusePgPacketWrite1ByteHeader(
+ struct adapter *pAdapter,
+ u8 efuseType,
+ u16 *pAddr,
+ struct pgpkt *pTargetPkt,
+ bool bPseudoTest);
+static bool
+hal_EfusePgPacketWriteData(
+ struct adapter *pAdapter,
+ u8 efuseType,
+ u16 *pAddr,
+ struct pgpkt *pTargetPkt,
+ bool bPseudoTest);
+
+static void
+hal_EfusePowerSwitch_RTL8188E(
+ struct adapter *pAdapter,
+ u8 bWrite,
+ u8 PwrState)
+{
+ u8 tempval;
+ u16 tmpV16;
+
+ if (PwrState) {
+ rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);
+
+ /* 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid */
+ tmpV16 = rtw_read16(pAdapter, REG_SYS_ISO_CTRL);
+ if (!(tmpV16 & PWC_EV12V)) {
+ tmpV16 |= PWC_EV12V;
+ rtw_write16(pAdapter, REG_SYS_ISO_CTRL, tmpV16);
+ }
+ /* Reset: 0x0000h[28], default valid */
+ tmpV16 = rtw_read16(pAdapter, REG_SYS_FUNC_EN);
+ if (!(tmpV16 & FEN_ELDR)) {
+ tmpV16 |= FEN_ELDR;
+ rtw_write16(pAdapter, REG_SYS_FUNC_EN, tmpV16);
+ }
+
+ /* Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid */
+ tmpV16 = rtw_read16(pAdapter, REG_SYS_CLKR);
+ if ((!(tmpV16 & LOADER_CLK_EN)) || (!(tmpV16 & ANA8M))) {
+ tmpV16 |= (LOADER_CLK_EN | ANA8M);
+ rtw_write16(pAdapter, REG_SYS_CLKR, tmpV16);
+ }
+
+ if (bWrite) {
+ /* Enable LDO 2.5V before read/write action */
+ tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
+ tempval &= 0x0F;
+ tempval |= (VOLTAGE_V25 << 4);
+ rtw_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80));
+ }
+ } else {
+ rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);
+
+ if (bWrite) {
+ /* Disable LDO 2.5V after read/write action */
+ tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
+ rtw_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F));
+ }
+ }
+}
+
+static void
+rtl8188e_EfusePowerSwitch(
+ struct adapter *pAdapter,
+ u8 bWrite,
+ u8 PwrState)
+{
+ hal_EfusePowerSwitch_RTL8188E(pAdapter, bWrite, PwrState);
+}
+
+
+static void Hal_EfuseReadEFuse88E(struct adapter *Adapter,
+ u16 _offset,
+ u16 _size_byte,
+ u8 *pbuf,
+ bool bPseudoTest
+ )
+{
+ u8 *efuseTbl = NULL;
+ u8 rtemp8[1];
+ u16 eFuse_Addr = 0;
+ u8 offset, wren;
+ u16 i, j;
+ u16 **eFuseWord = NULL;
+ u16 efuse_utilized = 0;
+ u8 u1temp = 0;
+
+ /* */
+ /* Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10. */
+ /* */
+ if ((_offset + _size_byte) > EFUSE_MAP_LEN_88E) {/* total E-Fuse table is 512bytes */
+ DBG_88E("Hal_EfuseReadEFuse88E(): Invalid offset(%#x) with read bytes(%#x)!!\n", _offset, _size_byte);
+ goto exit;
+ }
+
+ efuseTbl = (u8 *)rtw_zmalloc(EFUSE_MAP_LEN_88E);
+ if (efuseTbl == NULL) {
+ DBG_88E("%s: alloc efuseTbl fail!\n", __func__);
+ goto exit;
+ }
+
+ eFuseWord = (u16 **)rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16));
+ if (eFuseWord == NULL) {
+ DBG_88E("%s: alloc eFuseWord fail!\n", __func__);
+ goto exit;
+ }
+
+ /* 0. Refresh efuse init map as all oxFF. */
+ for (i = 0; i < EFUSE_MAX_SECTION_88E; i++)
+ for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
+ eFuseWord[i][j] = 0xFFFF;
+
+ /* */
+ /* 1. Read the first byte to check if efuse is empty!!! */
+ /* */
+ /* */
+ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);
+ if (*rtemp8 != 0xFF) {
+ efuse_utilized++;
+ eFuse_Addr++;
+ } else {
+ DBG_88E("EFUSE is empty efuse_Addr-%d efuse_data =%x\n", eFuse_Addr, *rtemp8);
+ goto exit;
+ }
+
+ /* */
+ /* 2. Read real efuse content. Filter PG header and every section data. */
+ /* */
+ while ((*rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) {
+ /* Check PG header for section num. */
+ if ((*rtemp8 & 0x1F) == 0x0F) { /* extended header */
+ u1temp = ((*rtemp8 & 0xE0) >> 5);
+
+ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);
+
+ if ((*rtemp8 & 0x0F) == 0x0F) {
+ eFuse_Addr++;
+ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);
+
+ if (*rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E))
+ eFuse_Addr++;
+ continue;
+ } else {
+ offset = ((*rtemp8 & 0xF0) >> 1) | u1temp;
+ wren = (*rtemp8 & 0x0F);
+ eFuse_Addr++;
+ }
+ } else {
+ offset = ((*rtemp8 >> 4) & 0x0f);
+ wren = (*rtemp8 & 0x0f);
+ }
+
+ if (offset < EFUSE_MAX_SECTION_88E) {
+ /* Get word enable value from PG header */
+
+ for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
+ /* Check word enable condition in the section */
+ if (!(wren & 0x01)) {
+ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);
+ eFuse_Addr++;
+ efuse_utilized++;
+ eFuseWord[offset][i] = (*rtemp8 & 0xff);
+ if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E)
+ break;
+ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);
+ eFuse_Addr++;
+ efuse_utilized++;
+ eFuseWord[offset][i] |= (((u16)*rtemp8 << 8) & 0xff00);
+ if (eFuse_Addr >= EFUSE_REAL_CONTENT_LEN_88E)
+ break;
+ }
+ wren >>= 1;
+ }
+ }
+
+ /* Read next PG header */
+ ReadEFuseByte(Adapter, eFuse_Addr, rtemp8, bPseudoTest);
+
+ if (*rtemp8 != 0xFF && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN_88E)) {
+ efuse_utilized++;
+ eFuse_Addr++;
+ }
+ }
+
+ /* 3. Collect 16 sections and 4 word unit into Efuse map. */
+ for (i = 0; i < EFUSE_MAX_SECTION_88E; i++) {
+ for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) {
+ efuseTbl[(i*8)+(j*2)] = (eFuseWord[i][j] & 0xff);
+ efuseTbl[(i*8)+((j*2)+1)] = ((eFuseWord[i][j] >> 8) & 0xff);
+ }
+ }
+
+ /* 4. Copy from Efuse map to output pointer memory!!! */
+ for (i = 0; i < _size_byte; i++)
+ pbuf[i] = efuseTbl[_offset+i];
+
+ /* 5. Calculate Efuse utilization. */
+ rtw_hal_set_hwreg(Adapter, HW_VAR_EFUSE_BYTES, (u8 *)&eFuse_Addr);
+
+exit:
+ kfree(efuseTbl);
+
+ if (eFuseWord)
+ rtw_mfree2d((void *)eFuseWord, EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16));
+}
+
+static void ReadEFuseByIC(struct adapter *Adapter, u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf, bool bPseudoTest)
+{
+ if (!bPseudoTest) {
+ int ret = _FAIL;
+ if (rtw_IOL_applied(Adapter)) {
+ rtw_hal_power_on(Adapter);
+
+ iol_mode_enable(Adapter, 1);
+ ret = iol_read_efuse(Adapter, 0, _offset, _size_byte, pbuf);
+ iol_mode_enable(Adapter, 0);
+
+ if (_SUCCESS == ret)
+ goto exit;
+ }
+ }
+ Hal_EfuseReadEFuse88E(Adapter, _offset, _size_byte, pbuf, bPseudoTest);
+
+exit:
+ return;
+}
+
+static void ReadEFuse_Pseudo(struct adapter *Adapter, u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf, bool bPseudoTest)
+{
+ Hal_EfuseReadEFuse88E(Adapter, _offset, _size_byte, pbuf, bPseudoTest);
+}
+
+static void rtl8188e_ReadEFuse(struct adapter *Adapter, u8 efuseType,
+ u16 _offset, u16 _size_byte, u8 *pbuf,
+ bool bPseudoTest)
+{
+ if (bPseudoTest)
+ ReadEFuse_Pseudo (Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest);
+ else
+ ReadEFuseByIC(Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest);
+}
+
+/* Do not support BT */
+static void Hal_EFUSEGetEfuseDefinition88E(struct adapter *pAdapter, u8 efuseType, u8 type, void *pOut)
+{
+ switch (type) {
+ case TYPE_EFUSE_MAX_SECTION:
+ {
+ u8 *pMax_section;
+ pMax_section = (u8 *)pOut;
+ *pMax_section = EFUSE_MAX_SECTION_88E;
+ }
+ break;
+ case TYPE_EFUSE_REAL_CONTENT_LEN:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E;
+ }
+ break;
+ case TYPE_EFUSE_CONTENT_LEN_BANK:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E;
+ }
+ break;
+ case TYPE_AVAILABLE_EFUSE_BYTES_BANK:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E);
+ }
+ break;
+ case TYPE_AVAILABLE_EFUSE_BYTES_TOTAL:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E);
+ }
+ break;
+ case TYPE_EFUSE_MAP_LEN:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = (u16)EFUSE_MAP_LEN_88E;
+ }
+ break;
+ case TYPE_EFUSE_PROTECT_BYTES_BANK:
+ {
+ u8 *pu1Tmp;
+ pu1Tmp = (u8 *)pOut;
+ *pu1Tmp = (u8)(EFUSE_OOB_PROTECT_BYTES_88E);
+ }
+ break;
+ default:
+ {
+ u8 *pu1Tmp;
+ pu1Tmp = (u8 *)pOut;
+ *pu1Tmp = 0;
+ }
+ break;
+ }
+}
+
+static void Hal_EFUSEGetEfuseDefinition_Pseudo88E(struct adapter *pAdapter, u8 efuseType, u8 type, void *pOut)
+{
+ switch (type) {
+ case TYPE_EFUSE_MAX_SECTION:
+ {
+ u8 *pMax_section;
+ pMax_section = (u8 *)pOut;
+ *pMax_section = EFUSE_MAX_SECTION_88E;
+ }
+ break;
+ case TYPE_EFUSE_REAL_CONTENT_LEN:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E;
+ }
+ break;
+ case TYPE_EFUSE_CONTENT_LEN_BANK:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = EFUSE_REAL_CONTENT_LEN_88E;
+ }
+ break;
+ case TYPE_AVAILABLE_EFUSE_BYTES_BANK:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E);
+ }
+ break;
+ case TYPE_AVAILABLE_EFUSE_BYTES_TOTAL:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = (u16)(EFUSE_REAL_CONTENT_LEN_88E-EFUSE_OOB_PROTECT_BYTES_88E);
+ }
+ break;
+ case TYPE_EFUSE_MAP_LEN:
+ {
+ u16 *pu2Tmp;
+ pu2Tmp = (u16 *)pOut;
+ *pu2Tmp = (u16)EFUSE_MAP_LEN_88E;
+ }
+ break;
+ case TYPE_EFUSE_PROTECT_BYTES_BANK:
+ {
+ u8 *pu1Tmp;
+ pu1Tmp = (u8 *)pOut;
+ *pu1Tmp = (u8)(EFUSE_OOB_PROTECT_BYTES_88E);
+ }
+ break;
+ default:
+ {
+ u8 *pu1Tmp;
+ pu1Tmp = (u8 *)pOut;
+ *pu1Tmp = 0;
+ }
+ break;
+ }
+}
+
+static void rtl8188e_EFUSE_GetEfuseDefinition(struct adapter *pAdapter, u8 efuseType, u8 type, void *pOut, bool bPseudoTest)
+{
+ if (bPseudoTest)
+ Hal_EFUSEGetEfuseDefinition_Pseudo88E(pAdapter, efuseType, type, pOut);
+ else
+ Hal_EFUSEGetEfuseDefinition88E(pAdapter, efuseType, type, pOut);
+}
+
+static u8 Hal_EfuseWordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr, u8 word_en, u8 *data, bool bPseudoTest)
+{
+ u16 tmpaddr = 0;
+ u16 start_addr = efuse_addr;
+ u8 badworden = 0x0F;
+ u8 tmpdata[8];
+
+ _rtw_memset((void *)tmpdata, 0xff, PGPKT_DATA_SIZE);
+
+ if (!(word_en&BIT0)) {
+ tmpaddr = start_addr;
+ efuse_OneByteWrite(pAdapter, start_addr++, data[0], bPseudoTest);
+ efuse_OneByteWrite(pAdapter, start_addr++, data[1], bPseudoTest);
+
+ efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[0], bPseudoTest);
+ efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[1], bPseudoTest);
+ if ((data[0] != tmpdata[0]) || (data[1] != tmpdata[1]))
+ badworden &= (~BIT0);
+ }
+ if (!(word_en&BIT1)) {
+ tmpaddr = start_addr;
+ efuse_OneByteWrite(pAdapter, start_addr++, data[2], bPseudoTest);
+ efuse_OneByteWrite(pAdapter, start_addr++, data[3], bPseudoTest);
+
+ efuse_OneByteRead(pAdapter, tmpaddr , &tmpdata[2], bPseudoTest);
+ efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[3], bPseudoTest);
+ if ((data[2] != tmpdata[2]) || (data[3] != tmpdata[3]))
+ badworden &= (~BIT1);
+ }
+ if (!(word_en&BIT2)) {
+ tmpaddr = start_addr;
+ efuse_OneByteWrite(pAdapter, start_addr++, data[4], bPseudoTest);
+ efuse_OneByteWrite(pAdapter, start_addr++, data[5], bPseudoTest);
+
+ efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[4], bPseudoTest);
+ efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[5], bPseudoTest);
+ if ((data[4] != tmpdata[4]) || (data[5] != tmpdata[5]))
+ badworden &= (~BIT2);
+ }
+ if (!(word_en&BIT3)) {
+ tmpaddr = start_addr;
+ efuse_OneByteWrite(pAdapter, start_addr++, data[6], bPseudoTest);
+ efuse_OneByteWrite(pAdapter, start_addr++, data[7], bPseudoTest);
+
+ efuse_OneByteRead(pAdapter, tmpaddr, &tmpdata[6], bPseudoTest);
+ efuse_OneByteRead(pAdapter, tmpaddr+1, &tmpdata[7], bPseudoTest);
+ if ((data[6] != tmpdata[6]) || (data[7] != tmpdata[7]))
+ badworden &= (~BIT3);
+ }
+ return badworden;
+}
+
+static u8 Hal_EfuseWordEnableDataWrite_Pseudo(struct adapter *pAdapter, u16 efuse_addr, u8 word_en, u8 *data, bool bPseudoTest)
+{
+ u8 ret;
+
+ ret = Hal_EfuseWordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest);
+ return ret;
+}
+
+static u8 rtl8188e_Efuse_WordEnableDataWrite(struct adapter *pAdapter, u16 efuse_addr, u8 word_en, u8 *data, bool bPseudoTest)
+{
+ u8 ret = 0;
+
+ if (bPseudoTest)
+ ret = Hal_EfuseWordEnableDataWrite_Pseudo (pAdapter, efuse_addr, word_en, data, bPseudoTest);
+ else
+ ret = Hal_EfuseWordEnableDataWrite(pAdapter, efuse_addr, word_en, data, bPseudoTest);
+ return ret;
+}
+
+static u16 hal_EfuseGetCurrentSize_8188e(struct adapter *pAdapter, bool bPseudoTest)
+{
+ int bContinual = true;
+ u16 efuse_addr = 0;
+ u8 hoffset = 0, hworden = 0;
+ u8 efuse_data, word_cnts = 0;
+
+ if (bPseudoTest)
+ efuse_addr = (u16)(fakeEfuseUsedBytes);
+ else
+ rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr);
+
+ while (bContinual &&
+ efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest) &&
+ AVAILABLE_EFUSE_ADDR(efuse_addr)) {
+ if (efuse_data != 0xFF) {
+ if ((efuse_data&0x1F) == 0x0F) { /* extended header */
+ hoffset = efuse_data;
+ efuse_addr++;
+ efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest);
+ if ((efuse_data & 0x0F) == 0x0F) {
+ efuse_addr++;
+ continue;
+ } else {
+ hoffset = ((hoffset & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
+ hworden = efuse_data & 0x0F;
+ }
+ } else {
+ hoffset = (efuse_data>>4) & 0x0F;
+ hworden = efuse_data & 0x0F;
+ }
+ word_cnts = Efuse_CalculateWordCnts(hworden);
+ /* read next header */
+ efuse_addr = efuse_addr + (word_cnts*2)+1;
+ } else {
+ bContinual = false;
+ }
+ }
+
+ if (bPseudoTest)
+ fakeEfuseUsedBytes = efuse_addr;
+ else
+ rtw_hal_set_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&efuse_addr);
+
+ return efuse_addr;
+}
+
+static u16 Hal_EfuseGetCurrentSize_Pseudo(struct adapter *pAdapter, bool bPseudoTest)
+{
+ u16 ret = 0;
+
+ ret = hal_EfuseGetCurrentSize_8188e(pAdapter, bPseudoTest);
+ return ret;
+}
+
+static u16 rtl8188e_EfuseGetCurrentSize(struct adapter *pAdapter, u8 efuseType, bool bPseudoTest)
+{
+ u16 ret = 0;
+
+ if (bPseudoTest)
+ ret = Hal_EfuseGetCurrentSize_Pseudo(pAdapter, bPseudoTest);
+ else
+ ret = hal_EfuseGetCurrentSize_8188e(pAdapter, bPseudoTest);
+ return ret;
+}
+
+static int hal_EfusePgPacketRead_8188e(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest)
+{
+ u8 ReadState = PG_STATE_HEADER;
+ int bContinual = true;
+ int bDataEmpty = true;
+ u8 efuse_data, word_cnts = 0;
+ u16 efuse_addr = 0;
+ u8 hoffset = 0, hworden = 0;
+ u8 tmpidx = 0;
+ u8 tmpdata[8];
+ u8 max_section = 0;
+ u8 tmp_header = 0;
+
+ EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAX_SECTION, (void *)&max_section, bPseudoTest);
+
+ if (data == NULL)
+ return false;
+ if (offset > max_section)
+ return false;
+
+ _rtw_memset((void *)data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
+ _rtw_memset((void *)tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
+
+ /* <Roger_TODO> Efuse has been pre-programmed dummy 5Bytes at the end of Efuse by CP. */
+ /* Skip dummy parts to prevent unexpected data read from Efuse. */
+ /* By pass right now. 2009.02.19. */
+ while (bContinual && AVAILABLE_EFUSE_ADDR(efuse_addr)) {
+ /* Header Read ------------- */
+ if (ReadState & PG_STATE_HEADER) {
+ if (efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest) && (efuse_data != 0xFF)) {
+ if (EXT_HEADER(efuse_data)) {
+ tmp_header = efuse_data;
+ efuse_addr++;
+ efuse_OneByteRead(pAdapter, efuse_addr, &efuse_data, bPseudoTest);
+ if (!ALL_WORDS_DISABLED(efuse_data)) {
+ hoffset = ((tmp_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
+ hworden = efuse_data & 0x0F;
+ } else {
+ DBG_88E("Error, All words disabled\n");
+ efuse_addr++;
+ continue;
+ }
+ } else {
+ hoffset = (efuse_data>>4) & 0x0F;
+ hworden = efuse_data & 0x0F;
+ }
+ word_cnts = Efuse_CalculateWordCnts(hworden);
+ bDataEmpty = true;
+
+ if (hoffset == offset) {
+ for (tmpidx = 0; tmpidx < word_cnts*2; tmpidx++) {
+ if (efuse_OneByteRead(pAdapter, efuse_addr+1+tmpidx, &efuse_data, bPseudoTest)) {
+ tmpdata[tmpidx] = efuse_data;
+ if (efuse_data != 0xff)
+ bDataEmpty = false;
+ }
+ }
+ if (bDataEmpty == false) {
+ ReadState = PG_STATE_DATA;
+ } else {/* read next header */
+ efuse_addr = efuse_addr + (word_cnts*2)+1;
+ ReadState = PG_STATE_HEADER;
+ }
+ } else {/* read next header */
+ efuse_addr = efuse_addr + (word_cnts*2)+1;
+ ReadState = PG_STATE_HEADER;
+ }
+ } else {
+ bContinual = false;
+ }
+ } else if (ReadState & PG_STATE_DATA) {
+ /* Data section Read ------------- */
+ efuse_WordEnableDataRead(hworden, tmpdata, data);
+ efuse_addr = efuse_addr + (word_cnts*2)+1;
+ ReadState = PG_STATE_HEADER;
+ }
+
+ }
+
+ if ((data[0] == 0xff) && (data[1] == 0xff) && (data[2] == 0xff) && (data[3] == 0xff) &&
+ (data[4] == 0xff) && (data[5] == 0xff) && (data[6] == 0xff) && (data[7] == 0xff))
+ return false;
+ else
+ return true;
+}
+
+static int Hal_EfusePgPacketRead(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest)
+{
+ int ret;
+
+ ret = hal_EfusePgPacketRead_8188e(pAdapter, offset, data, bPseudoTest);
+ return ret;
+}
+
+static int Hal_EfusePgPacketRead_Pseudo(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest)
+{
+ int ret;
+
+ ret = hal_EfusePgPacketRead_8188e(pAdapter, offset, data, bPseudoTest);
+ return ret;
+}
+
+static int rtl8188e_Efuse_PgPacketRead(struct adapter *pAdapter, u8 offset, u8 *data, bool bPseudoTest)
+{
+ int ret;
+
+ if (bPseudoTest)
+ ret = Hal_EfusePgPacketRead_Pseudo (pAdapter, offset, data, bPseudoTest);
+ else
+ ret = Hal_EfusePgPacketRead(pAdapter, offset, data, bPseudoTest);
+ return ret;
+}
+
+static bool hal_EfuseFixHeaderProcess(struct adapter *pAdapter, u8 efuseType, struct pgpkt *pFixPkt, u16 *pAddr, bool bPseudoTest)
+{
+ u8 originaldata[8], badworden = 0;
+ u16 efuse_addr = *pAddr;
+ u32 PgWriteSuccess = 0;
+
+ _rtw_memset((void *)originaldata, 0xff, 8);
+
+ if (Efuse_PgPacketRead(pAdapter, pFixPkt->offset, originaldata, bPseudoTest)) {
+ /* check if data exist */
+ badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pFixPkt->word_en, originaldata, bPseudoTest);
+
+ if (badworden != 0xf) { /* write fail */
+ PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pFixPkt->offset, badworden, originaldata, bPseudoTest);
+
+ if (!PgWriteSuccess)
+ return false;
+ else
+ efuse_addr = Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest);
+ } else {
+ efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) + 1;
+ }
+ } else {
+ efuse_addr = efuse_addr + (pFixPkt->word_cnts*2) + 1;
+ }
+ *pAddr = efuse_addr;
+ return true;
+}
+
+static bool hal_EfusePgPacketWrite2ByteHeader(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest)
+{
+ bool bRet = false;
+ u16 efuse_addr = *pAddr, efuse_max_available_len = 0;
+ u8 pg_header = 0, tmp_header = 0, pg_header_temp = 0;
+ u8 repeatcnt = 0;
+
+ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (void *)&efuse_max_available_len, bPseudoTest);
+
+ while (efuse_addr < efuse_max_available_len) {
+ pg_header = ((pTargetPkt->offset & 0x07) << 5) | 0x0F;
+ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
+ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
+
+ while (tmp_header == 0xFF) {
+ if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_)
+ return false;
+
+ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
+ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
+ }
+
+ /* to write ext_header */
+ if (tmp_header == pg_header) {
+ efuse_addr++;
+ pg_header_temp = pg_header;
+ pg_header = ((pTargetPkt->offset & 0x78) << 1) | pTargetPkt->word_en;
+
+ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
+ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
+
+ while (tmp_header == 0xFF) {
+ if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_)
+ return false;
+
+ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
+ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
+ }
+
+ if ((tmp_header & 0x0F) == 0x0F) { /* word_en PG fail */
+ if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_) {
+ return false;
+ } else {
+ efuse_addr++;
+ continue;
+ }
+ } else if (pg_header != tmp_header) { /* offset PG fail */
+ struct pgpkt fixPkt;
+ fixPkt.offset = ((pg_header_temp & 0xE0) >> 5) | ((tmp_header & 0xF0) >> 1);
+ fixPkt.word_en = tmp_header & 0x0F;
+ fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en);
+ if (!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest))
+ return false;
+ } else {
+ bRet = true;
+ break;
+ }
+ } else if ((tmp_header & 0x1F) == 0x0F) { /* wrong extended header */
+ efuse_addr += 2;
+ continue;
+ }
+ }
+
+ *pAddr = efuse_addr;
+ return bRet;
+}
+
+static bool hal_EfusePgPacketWrite1ByteHeader(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest)
+{
+ bool bRet = false;
+ u8 pg_header = 0, tmp_header = 0;
+ u16 efuse_addr = *pAddr;
+ u8 repeatcnt = 0;
+
+ pg_header = ((pTargetPkt->offset << 4) & 0xf0) | pTargetPkt->word_en;
+
+ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
+ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
+
+ while (tmp_header == 0xFF) {
+ if (repeatcnt++ > EFUSE_REPEAT_THRESHOLD_)
+ return false;
+ efuse_OneByteWrite(pAdapter, efuse_addr, pg_header, bPseudoTest);
+ efuse_OneByteRead(pAdapter, efuse_addr, &tmp_header, bPseudoTest);
+ }
+
+ if (pg_header == tmp_header) {
+ bRet = true;
+ } else {
+ struct pgpkt fixPkt;
+ fixPkt.offset = (tmp_header>>4) & 0x0F;
+ fixPkt.word_en = tmp_header & 0x0F;
+ fixPkt.word_cnts = Efuse_CalculateWordCnts(fixPkt.word_en);
+ if (!hal_EfuseFixHeaderProcess(pAdapter, efuseType, &fixPkt, &efuse_addr, bPseudoTest))
+ return false;
+ }
+
+ *pAddr = efuse_addr;
+ return bRet;
+}
+
+static bool hal_EfusePgPacketWriteData(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest)
+{
+ bool bRet = false;
+ u16 efuse_addr = *pAddr;
+ u8 badworden = 0;
+ u32 PgWriteSuccess = 0;
+
+ badworden = 0x0f;
+ badworden = Efuse_WordEnableDataWrite(pAdapter, efuse_addr+1, pTargetPkt->word_en, pTargetPkt->data, bPseudoTest);
+ if (badworden == 0x0F) {
+ /* write ok */
+ return true;
+ } else {
+ /* reorganize other pg packet */
+ PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest);
+ if (!PgWriteSuccess)
+ return false;
+ else
+ return true;
+ }
+ return bRet;
+}
+
+static bool
+hal_EfusePgPacketWriteHeader(
+ struct adapter *pAdapter,
+ u8 efuseType,
+ u16 *pAddr,
+ struct pgpkt *pTargetPkt,
+ bool bPseudoTest)
+{
+ bool bRet = false;
+
+ if (pTargetPkt->offset >= EFUSE_MAX_SECTION_BASE)
+ bRet = hal_EfusePgPacketWrite2ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest);
+ else
+ bRet = hal_EfusePgPacketWrite1ByteHeader(pAdapter, efuseType, pAddr, pTargetPkt, bPseudoTest);
+
+ return bRet;
+}
+
+static bool wordEnMatched(struct pgpkt *pTargetPkt, struct pgpkt *pCurPkt,
+ u8 *pWden)
+{
+ u8 match_word_en = 0x0F; /* default all words are disabled */
+
+ /* check if the same words are enabled both target and current PG packet */
+ if (((pTargetPkt->word_en & BIT0) == 0) &&
+ ((pCurPkt->word_en & BIT0) == 0))
+ match_word_en &= ~BIT0; /* enable word 0 */
+ if (((pTargetPkt->word_en & BIT1) == 0) &&
+ ((pCurPkt->word_en & BIT1) == 0))
+ match_word_en &= ~BIT1; /* enable word 1 */
+ if (((pTargetPkt->word_en & BIT2) == 0) &&
+ ((pCurPkt->word_en & BIT2) == 0))
+ match_word_en &= ~BIT2; /* enable word 2 */
+ if (((pTargetPkt->word_en & BIT3) == 0) &&
+ ((pCurPkt->word_en & BIT3) == 0))
+ match_word_en &= ~BIT3; /* enable word 3 */
+
+ *pWden = match_word_en;
+
+ if (match_word_en != 0xf)
+ return true;
+ else
+ return false;
+}
+
+static bool hal_EfuseCheckIfDatafollowed(struct adapter *pAdapter, u8 word_cnts, u16 startAddr, bool bPseudoTest)
+{
+ bool bRet = false;
+ u8 i, efuse_data;
+
+ for (i = 0; i < (word_cnts*2); i++) {
+ if (efuse_OneByteRead(pAdapter, (startAddr+i), &efuse_data, bPseudoTest) && (efuse_data != 0xFF))
+ bRet = true;
+ }
+ return bRet;
+}
+
+static bool hal_EfusePartialWriteCheck(struct adapter *pAdapter, u8 efuseType, u16 *pAddr, struct pgpkt *pTargetPkt, bool bPseudoTest)
+{
+ bool bRet = false;
+ u8 i, efuse_data = 0, cur_header = 0;
+ u8 matched_wden = 0, badworden = 0;
+ u16 startAddr = 0, efuse_max_available_len = 0, efuse_max = 0;
+ struct pgpkt curPkt;
+
+ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_AVAILABLE_EFUSE_BYTES_BANK, (void *)&efuse_max_available_len, bPseudoTest);
+ EFUSE_GetEfuseDefinition(pAdapter, efuseType, TYPE_EFUSE_REAL_CONTENT_LEN, (void *)&efuse_max, bPseudoTest);
+
+ if (efuseType == EFUSE_WIFI) {
+ if (bPseudoTest) {
+ startAddr = (u16)(fakeEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN);
+ } else {
+ rtw_hal_get_hwreg(pAdapter, HW_VAR_EFUSE_BYTES, (u8 *)&startAddr);
+ startAddr %= EFUSE_REAL_CONTENT_LEN;
+ }
+ } else {
+ if (bPseudoTest)
+ startAddr = (u16)(fakeBTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN);
+ else
+ startAddr = (u16)(BTEfuseUsedBytes%EFUSE_REAL_CONTENT_LEN);
+ }
+
+ while (1) {
+ if (startAddr >= efuse_max_available_len) {
+ bRet = false;
+ break;
+ }
+
+ if (efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest) && (efuse_data != 0xFF)) {
+ if (EXT_HEADER(efuse_data)) {
+ cur_header = efuse_data;
+ startAddr++;
+ efuse_OneByteRead(pAdapter, startAddr, &efuse_data, bPseudoTest);
+ if (ALL_WORDS_DISABLED(efuse_data)) {
+ bRet = false;
+ break;
+ } else {
+ curPkt.offset = ((cur_header & 0xE0) >> 5) | ((efuse_data & 0xF0) >> 1);
+ curPkt.word_en = efuse_data & 0x0F;
+ }
+ } else {
+ cur_header = efuse_data;
+ curPkt.offset = (cur_header>>4) & 0x0F;
+ curPkt.word_en = cur_header & 0x0F;
+ }
+
+ curPkt.word_cnts = Efuse_CalculateWordCnts(curPkt.word_en);
+ /* if same header is found but no data followed */
+ /* write some part of data followed by the header. */
+ if ((curPkt.offset == pTargetPkt->offset) &&
+ (!hal_EfuseCheckIfDatafollowed(pAdapter, curPkt.word_cnts, startAddr+1, bPseudoTest)) &&
+ wordEnMatched(pTargetPkt, &curPkt, &matched_wden)) {
+ /* Here to write partial data */
+ badworden = Efuse_WordEnableDataWrite(pAdapter, startAddr+1, matched_wden, pTargetPkt->data, bPseudoTest);
+ if (badworden != 0x0F) {
+ u32 PgWriteSuccess = 0;
+ /* if write fail on some words, write these bad words again */
+
+ PgWriteSuccess = Efuse_PgPacketWrite(pAdapter, pTargetPkt->offset, badworden, pTargetPkt->data, bPseudoTest);
+
+ if (!PgWriteSuccess) {
+ bRet = false; /* write fail, return */
+ break;
+ }
+ }
+ /* partial write ok, update the target packet for later use */
+ for (i = 0; i < 4; i++) {
+ if ((matched_wden & (0x1<<i)) == 0) /* this word has been written */
+ pTargetPkt->word_en |= (0x1<<i); /* disable the word */
+ }
+ pTargetPkt->word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en);
+ }
+ /* read from next header */
+ startAddr = startAddr + (curPkt.word_cnts*2) + 1;
+ } else {
+ /* not used header, 0xff */
+ *pAddr = startAddr;
+ bRet = true;
+ break;
+ }
+ }
+ return bRet;
+}
+
+static bool
+hal_EfusePgCheckAvailableAddr(
+ struct adapter *pAdapter,
+ u8 efuseType,
+ bool bPseudoTest
+ )
+{
+ u16 efuse_max_available_len = 0;
+
+ /* Change to check TYPE_EFUSE_MAP_LEN , beacuse 8188E raw 256, logic map over 256. */
+ EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&efuse_max_available_len, false);
+
+ if (Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len)
+ return false;
+ return true;
+}
+
+static void hal_EfuseConstructPGPkt(u8 offset, u8 word_en, u8 *pData, struct pgpkt *pTargetPkt)
+{
+ _rtw_memset((void *)pTargetPkt->data, 0xFF, sizeof(u8)*8);
+ pTargetPkt->offset = offset;
+ pTargetPkt->word_en = word_en;
+ efuse_WordEnableDataRead(word_en, pData, pTargetPkt->data);
+ pTargetPkt->word_cnts = Efuse_CalculateWordCnts(pTargetPkt->word_en);
+}
+
+static bool hal_EfusePgPacketWrite_8188e(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *pData, bool bPseudoTest)
+{
+ struct pgpkt targetPkt;
+ u16 startAddr = 0;
+ u8 efuseType = EFUSE_WIFI;
+
+ if (!hal_EfusePgCheckAvailableAddr(pAdapter, efuseType, bPseudoTest))
+ return false;
+
+ hal_EfuseConstructPGPkt(offset, word_en, pData, &targetPkt);
+
+ if (!hal_EfusePartialWriteCheck(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
+ return false;
+
+ if (!hal_EfusePgPacketWriteHeader(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
+ return false;
+
+ if (!hal_EfusePgPacketWriteData(pAdapter, efuseType, &startAddr, &targetPkt, bPseudoTest))
+ return false;
+
+ return true;
+}
+
+static int Hal_EfusePgPacketWrite_Pseudo(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *data, bool bPseudoTest)
+{
+ int ret;
+
+ ret = hal_EfusePgPacketWrite_8188e(pAdapter, offset, word_en, data, bPseudoTest);
+ return ret;
+}
+
+static int Hal_EfusePgPacketWrite(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *data, bool bPseudoTest)
+{
+ int ret = 0;
+ ret = hal_EfusePgPacketWrite_8188e(pAdapter, offset, word_en, data, bPseudoTest);
+
+ return ret;
+}
+
+static int rtl8188e_Efuse_PgPacketWrite(struct adapter *pAdapter, u8 offset, u8 word_en, u8 *data, bool bPseudoTest)
+{
+ int ret;
+
+ if (bPseudoTest)
+ ret = Hal_EfusePgPacketWrite_Pseudo (pAdapter, offset, word_en, data, bPseudoTest);
+ else
+ ret = Hal_EfusePgPacketWrite(pAdapter, offset, word_en, data, bPseudoTest);
+ return ret;
+}
+
+static struct HAL_VERSION ReadChipVersion8188E(struct adapter *padapter)
+{
+ u32 value32;
+ struct HAL_VERSION ChipVersion;
+ struct hal_data_8188e *pHalData;
+
+ pHalData = GET_HAL_DATA(padapter);
+
+ value32 = rtw_read32(padapter, REG_SYS_CFG);
+ ChipVersion.ICType = CHIP_8188E;
+ ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP);
+
+ ChipVersion.RFType = RF_TYPE_1T1R;
+ ChipVersion.VendorType = ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC);
+ ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK)>>CHIP_VER_RTL_SHIFT; /* IC version (CUT) */
+
+ /* For regulator mode. by tynli. 2011.01.14 */
+ pHalData->RegulatorMode = ((value32 & TRP_BT_EN) ? RT_LDO_REGULATOR : RT_SWITCHING_REGULATOR);
+
+ ChipVersion.ROMVer = 0; /* ROM code version. */
+ pHalData->MultiFunc = RT_MULTI_FUNC_NONE;
+
+ dump_chip_info(ChipVersion);
+
+ pHalData->VersionID = ChipVersion;
+
+ if (IS_1T2R(ChipVersion)) {
+ pHalData->rf_type = RF_1T2R;
+ pHalData->NumTotalRFPath = 2;
+ } else if (IS_2T2R(ChipVersion)) {
+ pHalData->rf_type = RF_2T2R;
+ pHalData->NumTotalRFPath = 2;
+ } else{
+ pHalData->rf_type = RF_1T1R;
+ pHalData->NumTotalRFPath = 1;
+ }
+
+ MSG_88E("RF_Type is %x!!\n", pHalData->rf_type);
+
+ return ChipVersion;
+}
+
+static void rtl8188e_read_chip_version(struct adapter *padapter)
+{
+ ReadChipVersion8188E(padapter);
+}
+
+static void rtl8188e_GetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVariable, void *pValue1, bool bSet)
+{
+}
+
+static void rtl8188e_SetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVariable, void *pValue1, bool bSet)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ struct odm_dm_struct *podmpriv = &pHalData->odmpriv;
+ switch (eVariable) {
+ case HAL_ODM_STA_INFO:
+ {
+ struct sta_info *psta = (struct sta_info *)pValue1;
+ if (bSet) {
+ DBG_88E("### Set STA_(%d) info\n", psta->mac_id);
+ ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, psta);
+ ODM_RAInfo_Init(podmpriv, psta->mac_id);
+ } else {
+ DBG_88E("### Clean STA_(%d) info\n", psta->mac_id);
+ ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, NULL);
+ }
+ }
+ break;
+ case HAL_ODM_P2P_STATE:
+ ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DIRECT, bSet);
+ break;
+ case HAL_ODM_WIFI_DISPLAY_STATE:
+ ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DISPLAY, bSet);
+ break;
+ default:
+ break;
+ }
+}
+
+void rtl8188e_clone_haldata(struct adapter *dst_adapter, struct adapter *src_adapter)
+{
+ memcpy(dst_adapter->HalData, src_adapter->HalData, dst_adapter->hal_data_sz);
+}
+
+void rtl8188e_start_thread(struct adapter *padapter)
+{
+}
+
+void rtl8188e_stop_thread(struct adapter *padapter)
+{
+}
+
+static void hal_notch_filter_8188e(struct adapter *adapter, bool enable)
+{
+ if (enable) {
+ DBG_88E("Enable notch filter\n");
+ rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
+ } else {
+ DBG_88E("Disable notch filter\n");
+ rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
+ }
+}
+void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc)
+{
+ pHalFunc->free_hal_data = &rtl8188e_free_hal_data;
+
+ pHalFunc->dm_init = &rtl8188e_init_dm_priv;
+ pHalFunc->dm_deinit = &rtl8188e_deinit_dm_priv;
+
+ pHalFunc->read_chip_version = &rtl8188e_read_chip_version;
+
+ pHalFunc->set_bwmode_handler = &PHY_SetBWMode8188E;
+ pHalFunc->set_channel_handler = &PHY_SwChnl8188E;
+
+ pHalFunc->hal_dm_watchdog = &rtl8188e_HalDmWatchDog;
+
+ pHalFunc->Add_RateATid = &rtl8188e_Add_RateATid;
+ pHalFunc->run_thread = &rtl8188e_start_thread;
+ pHalFunc->cancel_thread = &rtl8188e_stop_thread;
+
+ pHalFunc->AntDivBeforeLinkHandler = &AntDivBeforeLink8188E;
+ pHalFunc->AntDivCompareHandler = &AntDivCompare8188E;
+ pHalFunc->read_bbreg = &rtl8188e_PHY_QueryBBReg;
+ pHalFunc->write_bbreg = &rtl8188e_PHY_SetBBReg;
+ pHalFunc->read_rfreg = &rtl8188e_PHY_QueryRFReg;
+ pHalFunc->write_rfreg = &rtl8188e_PHY_SetRFReg;
+
+ /* Efuse related function */
+ pHalFunc->EfusePowerSwitch = &rtl8188e_EfusePowerSwitch;
+ pHalFunc->ReadEFuse = &rtl8188e_ReadEFuse;
+ pHalFunc->EFUSEGetEfuseDefinition = &rtl8188e_EFUSE_GetEfuseDefinition;
+ pHalFunc->EfuseGetCurrentSize = &rtl8188e_EfuseGetCurrentSize;
+ pHalFunc->Efuse_PgPacketRead = &rtl8188e_Efuse_PgPacketRead;
+ pHalFunc->Efuse_PgPacketWrite = &rtl8188e_Efuse_PgPacketWrite;
+ pHalFunc->Efuse_WordEnableDataWrite = &rtl8188e_Efuse_WordEnableDataWrite;
+
+ pHalFunc->sreset_init_value = &sreset_init_value;
+ pHalFunc->sreset_reset_value = &sreset_reset_value;
+ pHalFunc->silentreset = &rtl8188e_silentreset_for_specific_platform;
+ pHalFunc->sreset_xmit_status_check = &rtl8188e_sreset_xmit_status_check;
+ pHalFunc->sreset_linked_status_check = &rtl8188e_sreset_linked_status_check;
+ pHalFunc->sreset_get_wifi_status = &sreset_get_wifi_status;
+
+ pHalFunc->GetHalODMVarHandler = &rtl8188e_GetHalODMVar;
+ pHalFunc->SetHalODMVarHandler = &rtl8188e_SetHalODMVar;
+
+ pHalFunc->IOL_exec_cmds_sync = &rtl8188e_IOL_exec_cmds_sync;
+
+ pHalFunc->hal_notch_filter = &hal_notch_filter_8188e;
+}
+
+u8 GetEEPROMSize8188E(struct adapter *padapter)
+{
+ u8 size = 0;
+ u32 cr;
+
+ cr = rtw_read16(padapter, REG_9346CR);
+ /* 6: EEPROM used is 93C46, 4: boot from E-Fuse. */
+ size = (cr & BOOT_FROM_EEPROM) ? 6 : 4;
+
+ MSG_88E("EEPROM type is %s\n", size == 4 ? "E-FUSE" : "93C46");
+
+ return size;
+}
+
+/* */
+/* */
+/* LLT R/W/Init function */
+/* */
+/* */
+static s32 _LLTWrite(struct adapter *padapter, u32 address, u32 data)
+{
+ s32 status = _SUCCESS;
+ s32 count = 0;
+ u32 value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
+ u16 LLTReg = REG_LLT_INIT;
+
+ rtw_write32(padapter, LLTReg, value);
+
+ /* polling */
+ do {
+ value = rtw_read32(padapter, LLTReg);
+ if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
+ break;
+
+ if (count > POLLING_LLT_THRESHOLD) {
+ RT_TRACE(_module_hal_init_c_, _drv_err_, ("Failed to polling write LLT done at address %d!\n", address));
+ status = _FAIL;
+ break;
+ }
+ } while (count++);
+
+ return status;
+}
+
+s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy)
+{
+ s32 status = _FAIL;
+ u32 i;
+ u32 Last_Entry_Of_TxPktBuf = LAST_ENTRY_OF_TX_PKT_BUFFER;/* 176, 22k */
+
+ if (rtw_IOL_applied(padapter)) {
+ status = iol_InitLLTTable(padapter, txpktbuf_bndy);
+ } else {
+ for (i = 0; i < (txpktbuf_bndy - 1); i++) {
+ status = _LLTWrite(padapter, i, i + 1);
+ if (_SUCCESS != status)
+ return status;
+ }
+
+ /* end of list */
+ status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF);
+ if (_SUCCESS != status)
+ return status;
+
+ /* Make the other pages as ring buffer */
+ /* This ring buffer is used as beacon buffer if we config this MAC as two MAC transfer. */
+ /* Otherwise used as local loopback buffer. */
+ for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) {
+ status = _LLTWrite(padapter, i, (i + 1));
+ if (_SUCCESS != status)
+ return status;
+ }
+
+ /* Let last entry point to the start entry of ring buffer */
+ status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy);
+ if (_SUCCESS != status) {
+ return status;
+ }
+ }
+
+ return status;
+}
+
+void
+Hal_InitPGData88E(struct adapter *padapter)
+{
+ struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
+
+ if (!pEEPROM->bautoload_fail_flag) { /* autoload OK. */
+ if (!is_boot_from_eeprom(padapter)) {
+ /* Read EFUSE real map to shadow. */
+ EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false);
+ }
+ } else {/* autoload fail */
+ RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("AutoLoad Fail reported from CR9346!!\n"));
+ /* update to default value 0xFF */
+ if (!is_boot_from_eeprom(padapter))
+ EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false);
+ }
+}
+
+void
+Hal_EfuseParseIDCode88E(
+ struct adapter *padapter,
+ u8 *hwinfo
+ )
+{
+ struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
+ u16 EEPROMId;
+
+ /* Checl 0x8129 again for making sure autoload status!! */
+ EEPROMId = le16_to_cpu(*((__le16 *)hwinfo));
+ if (EEPROMId != RTL_EEPROM_ID) {
+ DBG_88E("EEPROM ID(%#x) is invalid!!\n", EEPROMId);
+ pEEPROM->bautoload_fail_flag = true;
+ } else {
+ pEEPROM->bautoload_fail_flag = false;
+ }
+
+ DBG_88E("EEPROM ID = 0x%04x\n", EEPROMId);
+}
+
+static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G, u8 *PROMContent, bool AutoLoadFail)
+{
+ u32 rfPath, eeAddr = EEPROM_TX_PWR_INX_88E, group, TxCount = 0;
+
+ _rtw_memset(pwrInfo24G, 0, sizeof(struct txpowerinfo24g));
+
+ if (AutoLoadFail) {
+ for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) {
+ /* 2.4G default value */
+ for (group = 0; group < MAX_CHNL_GROUP_24G; group++) {
+ pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
+ pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
+ }
+ for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
+ if (TxCount == 0) {
+ pwrInfo24G->BW20_Diff[rfPath][0] = EEPROM_DEFAULT_24G_HT20_DIFF;
+ pwrInfo24G->OFDM_Diff[rfPath][0] = EEPROM_DEFAULT_24G_OFDM_DIFF;
+ } else {
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ }
+ }
+ }
+ return;
+ }
+
+ for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) {
+ /* 2.4G default value */
+ for (group = 0; group < MAX_CHNL_GROUP_24G; group++) {
+ pwrInfo24G->IndexCCK_Base[rfPath][group] = PROMContent[eeAddr++];
+ if (pwrInfo24G->IndexCCK_Base[rfPath][group] == 0xFF)
+ pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
+ }
+ for (group = 0; group < MAX_CHNL_GROUP_24G-1; group++) {
+ pwrInfo24G->IndexBW40_Base[rfPath][group] = PROMContent[eeAddr++];
+ if (pwrInfo24G->IndexBW40_Base[rfPath][group] == 0xFF)
+ pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
+ }
+ for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
+ if (TxCount == 0) {
+ pwrInfo24G->BW40_Diff[rfPath][TxCount] = 0;
+ if (PROMContent[eeAddr] == 0xFF) {
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF;
+ } else {
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
+ }
+
+ if (PROMContent[eeAddr] == 0xFF) {
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_OFDM_DIFF;
+ } else {
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
+ }
+ pwrInfo24G->CCK_Diff[rfPath][TxCount] = 0;
+ eeAddr++;
+ } else {
+ if (PROMContent[eeAddr] == 0xFF) {
+ pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ } else {
+ pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0;
+ }
+
+ if (PROMContent[eeAddr] == 0xFF) {
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ } else {
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
+ }
+ eeAddr++;
+
+ if (PROMContent[eeAddr] == 0xFF) {
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ } else {
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
+ }
+
+ if (PROMContent[eeAddr] == 0xFF) {
+ pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+ } else {
+ pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT3) /* 4bit sign number to 8 bit sign number */
+ pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0;
+ }
+ eeAddr++;
+ }
+ }
+ }
+}
+
+static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup)
+{
+ u8 bIn24G = true;
+
+ if (chnl <= 14) {
+ bIn24G = true;
+
+ if (chnl < 3) /* Chanel 1-2 */
+ *pGroup = 0;
+ else if (chnl < 6) /* Channel 3-5 */
+ *pGroup = 1;
+ else if (chnl < 9) /* Channel 6-8 */
+ *pGroup = 2;
+ else if (chnl < 12) /* Channel 9-11 */
+ *pGroup = 3;
+ else if (chnl < 14) /* Channel 12-13 */
+ *pGroup = 4;
+ else if (chnl == 14) /* Channel 14 */
+ *pGroup = 5;
+ } else {
+ bIn24G = false;
+
+ if (chnl <= 40)
+ *pGroup = 0;
+ else if (chnl <= 48)
+ *pGroup = 1;
+ else if (chnl <= 56)
+ *pGroup = 2;
+ else if (chnl <= 64)
+ *pGroup = 3;
+ else if (chnl <= 104)
+ *pGroup = 4;
+ else if (chnl <= 112)
+ *pGroup = 5;
+ else if (chnl <= 120)
+ *pGroup = 5;
+ else if (chnl <= 128)
+ *pGroup = 6;
+ else if (chnl <= 136)
+ *pGroup = 7;
+ else if (chnl <= 144)
+ *pGroup = 8;
+ else if (chnl <= 153)
+ *pGroup = 9;
+ else if (chnl <= 161)
+ *pGroup = 10;
+ else if (chnl <= 177)
+ *pGroup = 11;
+ }
+ return bIn24G;
+}
+
+void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+ if (AutoLoadFail) {
+ padapter->pwrctrlpriv.bHWPowerdown = false;
+ padapter->pwrctrlpriv.bSupportRemoteWakeup = false;
+ } else {
+ /* hw power down mode selection , 0:rf-off / 1:power down */
+
+ if (padapter->registrypriv.hwpdn_mode == 2)
+ padapter->pwrctrlpriv.bHWPowerdown = (hwinfo[EEPROM_RF_FEATURE_OPTION_88E] & BIT4);
+ else
+ padapter->pwrctrlpriv.bHWPowerdown = padapter->registrypriv.hwpdn_mode;
+
+ /* decide hw if support remote wakeup function */
+ /* if hw supported, 8051 (SIE) will generate WeakUP signal(D+/D- toggle) when autoresume */
+ padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT1) ? true : false;
+
+ DBG_88E("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) , bSupportRemoteWakeup(%x)\n", __func__,
+ padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown , padapter->pwrctrlpriv.bSupportRemoteWakeup);
+
+ DBG_88E("### PS params => power_mgnt(%x), usbss_enable(%x) ###\n", padapter->registrypriv.power_mgnt, padapter->registrypriv.usbss_enable);
+ }
+}
+
+void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool AutoLoadFail)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+ struct txpowerinfo24g pwrInfo24G;
+ u8 rfPath, ch, group;
+ u8 bIn24G, TxCount;
+
+ Hal_ReadPowerValueFromPROM_8188E(&pwrInfo24G, PROMContent, AutoLoadFail);
+
+ if (!AutoLoadFail)
+ pHalData->bTXPowerDataReadFromEEPORM = true;
+
+ for (rfPath = 0; rfPath < pHalData->NumTotalRFPath; rfPath++) {
+ for (ch = 0; ch <= CHANNEL_MAX_NUMBER; ch++) {
+ bIn24G = Hal_GetChnlGroup88E(ch, &group);
+ if (bIn24G) {
+ pHalData->Index24G_CCK_Base[rfPath][ch] = pwrInfo24G.IndexCCK_Base[rfPath][group];
+ if (ch == 14)
+ pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][4];
+ else
+ pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][group];
+ }
+ if (bIn24G) {
+ DBG_88E("======= Path %d, Channel %d =======\n", rfPath, ch);
+ DBG_88E("Index24G_CCK_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_CCK_Base[rfPath][ch]);
+ DBG_88E("Index24G_BW40_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_BW40_Base[rfPath][ch]);
+ }
+ }
+ for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
+ pHalData->CCK_24G_Diff[rfPath][TxCount] = pwrInfo24G.CCK_Diff[rfPath][TxCount];
+ pHalData->OFDM_24G_Diff[rfPath][TxCount] = pwrInfo24G.OFDM_Diff[rfPath][TxCount];
+ pHalData->BW20_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW20_Diff[rfPath][TxCount];
+ pHalData->BW40_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW40_Diff[rfPath][TxCount];
+ DBG_88E("======= TxCount %d =======\n", TxCount);
+ DBG_88E("CCK_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->CCK_24G_Diff[rfPath][TxCount]);
+ DBG_88E("OFDM_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->OFDM_24G_Diff[rfPath][TxCount]);
+ DBG_88E("BW20_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW20_24G_Diff[rfPath][TxCount]);
+ DBG_88E("BW40_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW40_24G_Diff[rfPath][TxCount]);
+ }
+ }
+
+ /* 2010/10/19 MH Add Regulator recognize for CU. */
+ if (!AutoLoadFail) {
+ pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x7); /* bit0~2 */
+ if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
+ pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION&0x7); /* bit0~2 */
+ } else {
+ pHalData->EEPROMRegulatory = 0;
+ }
+ DBG_88E("EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory);
+}
+
+void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+
+ if (!AutoLoadFail) {
+ pHalData->CrystalCap = hwinfo[EEPROM_XTAL_88E];
+ if (pHalData->CrystalCap == 0xFF)
+ pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E;
+ } else {
+ pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E;
+ }
+ DBG_88E("CrystalCap: 0x%2x\n", pHalData->CrystalCap);
+}
+
+void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+
+ if (!AutoLoadFail)
+ pHalData->BoardType = ((hwinfo[EEPROM_RF_BOARD_OPTION_88E]&0xE0)>>5);
+ else
+ pHalData->BoardType = 0;
+ DBG_88E("Board Type: 0x%2x\n", pHalData->BoardType);
+}
+
+void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+
+ if (!AutoLoadFail) {
+ pHalData->EEPROMVersion = hwinfo[EEPROM_VERSION_88E];
+ if (pHalData->EEPROMVersion == 0xFF)
+ pHalData->EEPROMVersion = EEPROM_Default_Version;
+ } else {
+ pHalData->EEPROMVersion = 1;
+ }
+ RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
+ ("Hal_EfuseParseEEPROMVer(), EEVer = %d\n",
+ pHalData->EEPROMVersion));
+}
+
+void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+ padapter->mlmepriv.ChannelPlan =
+ hal_com_get_channel_plan(padapter,
+ hwinfo ? hwinfo[EEPROM_ChannelPlan_88E] : 0xFF,
+ padapter->registrypriv.channel_plan,
+ RT_CHANNEL_DOMAIN_WORLD_WIDE_13, AutoLoadFail);
+
+ DBG_88E("mlmepriv.ChannelPlan = 0x%02x\n", padapter->mlmepriv.ChannelPlan);
+}
+
+void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+
+ if (!AutoLoadFail) {
+ pHalData->EEPROMCustomerID = hwinfo[EEPROM_CUSTOMERID_88E];
+ } else {
+ pHalData->EEPROMCustomerID = 0;
+ pHalData->EEPROMSubCustomerID = 0;
+ }
+ DBG_88E("EEPROM Customer ID: 0x%2x\n", pHalData->EEPROMCustomerID);
+}
+
+void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool AutoLoadFail)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+ struct registry_priv *registry_par = &pAdapter->registrypriv;
+
+ if (!AutoLoadFail) {
+ /* Antenna Diversity setting. */
+ if (registry_par->antdiv_cfg == 2) { /* 2:By EFUSE */
+ pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x18)>>3;
+ if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
+ pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION&0x18)>>3;;
+ } else {
+ pHalData->AntDivCfg = registry_par->antdiv_cfg; /* 0:OFF , 1:ON, 2:By EFUSE */
+ }
+
+ if (registry_par->antdiv_type == 0) {
+ /* If TRxAntDivType is AUTO in advanced setting, use EFUSE value instead. */
+ pHalData->TRxAntDivType = PROMContent[EEPROM_RF_ANTENNA_OPT_88E];
+ if (pHalData->TRxAntDivType == 0xFF)
+ pHalData->TRxAntDivType = CG_TRX_HW_ANTDIV; /* For 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */
+ } else {
+ pHalData->TRxAntDivType = registry_par->antdiv_type;
+ }
+
+ if (pHalData->TRxAntDivType == CG_TRX_HW_ANTDIV || pHalData->TRxAntDivType == CGCS_RX_HW_ANTDIV)
+ pHalData->AntDivCfg = 1; /* 0xC1[3] is ignored. */
+ } else {
+ pHalData->AntDivCfg = 0;
+ pHalData->TRxAntDivType = pHalData->TRxAntDivType; /* The value in the driver setting of device manager. */
+ }
+ DBG_88E("EEPROM : AntDivCfg = %x, TRxAntDivType = %x\n", pHalData->AntDivCfg, pHalData->TRxAntDivType);
+}
+
+void Hal_ReadThermalMeter_88E(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+
+ /* ThermalMeter from EEPROM */
+ if (!AutoloadFail)
+ pHalData->EEPROMThermalMeter = PROMContent[EEPROM_THERMAL_METER_88E];
+ else
+ pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E;
+
+ if (pHalData->EEPROMThermalMeter == 0xff || AutoloadFail) {
+ pHalData->bAPKThermalMeterIgnore = true;
+ pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E;
+ }
+ DBG_88E("ThermalMeter = 0x%x\n", pHalData->EEPROMThermalMeter);
+}
+
+void Hal_InitChannelPlan(struct adapter *padapter)
+{
+}
+
+bool HalDetectPwrDownMode88E(struct adapter *Adapter)
+{
+ u8 tmpvalue = 0;
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
+
+ EFUSE_ShadowRead(Adapter, 1, EEPROM_RF_FEATURE_OPTION_88E, (u32 *)&tmpvalue);
+
+ /* 2010/08/25 MH INF priority > PDN Efuse value. */
+ if (tmpvalue & BIT(4) && pwrctrlpriv->reg_pdnmode)
+ pHalData->pwrdown = true;
+ else
+ pHalData->pwrdown = false;
+
+ DBG_88E("HalDetectPwrDownMode(): PDN =%d\n", pHalData->pwrdown);
+
+ return pHalData->pwrdown;
+} /* HalDetectPwrDownMode */
+
+/* This function is used only for 92C to set REG_BCN_CTRL(0x550) register. */
+/* We just reserve the value of the register in variable pHalData->RegBcnCtrlVal and then operate */
+/* the value of the register via atomic operation. */
+/* This prevents from race condition when setting this register. */
+/* The value of pHalData->RegBcnCtrlVal is initialized in HwConfigureRTL8192CE() function. */
+
+void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits)
+{
+ struct hal_data_8188e *pHalData;
+
+ pHalData = GET_HAL_DATA(padapter);
+
+ pHalData->RegBcnCtrlVal |= SetBits;
+ pHalData->RegBcnCtrlVal &= ~ClearBits;
+
+ rtw_write8(padapter, REG_BCN_CTRL, (u8)pHalData->RegBcnCtrlVal);
+}
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _RTL8188E_MP_C_
+
+#include <drv_types.h>
+#include <rtw_mp.h>
+#include <rtl8188e_hal.h>
+#include <rtl8188e_dm.h>
+
+s32 Hal_SetPowerTracking(struct adapter *padapter, u8 enable)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+ struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv);
+
+ if (!netif_running(padapter->pnetdev)) {
+ RT_TRACE(_module_mp_, _drv_warning_,
+ ("SetPowerTracking! Fail: interface not opened!\n"));
+ return _FAIL;
+ }
+
+ if (!check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE)) {
+ RT_TRACE(_module_mp_, _drv_warning_,
+ ("SetPowerTracking! Fail: not in MP mode!\n"));
+ return _FAIL;
+ }
+
+ if (enable)
+ pDM_Odm->RFCalibrateInfo.bTXPowerTracking = true;
+ else
+ pDM_Odm->RFCalibrateInfo.bTXPowerTrackingInit = false;
+
+ return _SUCCESS;
+}
+
+void Hal_GetPowerTracking(struct adapter *padapter, u8 *enable)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+ struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv);
+
+ *enable = pDM_Odm->RFCalibrateInfo.TxPowerTrackControl;
+}
+
+/*-----------------------------------------------------------------------------
+ * Function: mpt_SwitchRfSetting
+ *
+ * Overview: Change RF Setting when we siwthc channel/rate/BW for MP.
+ *
+ * Input: struct adapter * pAdapter
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 01/08/2009 MHC Suggestion from SD3 Willis for 92S series.
+ * 01/09/2009 MHC Add CCK modification for 40MHZ. Suggestion from SD3.
+ *
+ *---------------------------------------------------------------------------*/
+void Hal_mpt_SwitchRfSetting(struct adapter *pAdapter)
+{
+ struct mp_priv *pmp = &pAdapter->mppriv;
+
+ /* <20120525, Kordan> Dynamic mechanism for APK, asked by Dennis. */
+ pmp->MptCtx.backup0x52_RF_A = (u8)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0);
+ pmp->MptCtx.backup0x52_RF_B = (u8)PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0);
+ PHY_SetRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0, 0xD);
+ PHY_SetRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0, 0xD);
+
+ return;
+}
+/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/
+
+/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
+void Hal_MPT_CCKTxPowerAdjust(struct adapter *Adapter, bool bInCH14)
+{
+ u32 TempVal = 0, TempVal2 = 0, TempVal3 = 0;
+ u32 CurrCCKSwingVal = 0, CCKSwingIndex = 12;
+ u8 i;
+
+ /* get current cck swing value and check 0xa22 & 0xa23 later to match the table. */
+ CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord);
+
+ if (!bInCH14) {
+ /* Readback the current bb cck swing value and compare with the table to */
+ /* get the current swing index */
+ for (i = 0; i < CCK_TABLE_SIZE; i++) {
+ if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) &&
+ (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1])) {
+ CCKSwingIndex = i;
+ break;
+ }
+ }
+
+ /* Write 0xa22 0xa23 */
+ TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] +
+ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8);
+
+
+ /* Write 0xa24 ~ 0xa27 */
+ TempVal2 = 0;
+ TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] +
+ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) +
+ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16)+
+ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24);
+
+ /* Write 0xa28 0xa29 */
+ TempVal3 = 0;
+ TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] +
+ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8);
+ } else {
+ for (i = 0; i < CCK_TABLE_SIZE; i++) {
+ if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) &&
+ (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1])) {
+ CCKSwingIndex = i;
+ break;
+ }
+ }
+
+ /* Write 0xa22 0xa23 */
+ TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] +
+ (CCKSwingTable_Ch14[CCKSwingIndex][1]<<8);
+
+ /* Write 0xa24 ~ 0xa27 */
+ TempVal2 = 0;
+ TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] +
+ (CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) +
+ (CCKSwingTable_Ch14[CCKSwingIndex][4]<<16)+
+ (CCKSwingTable_Ch14[CCKSwingIndex][5]<<24);
+
+ /* Write 0xa28 0xa29 */
+ TempVal3 = 0;
+ TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] +
+ (CCKSwingTable_Ch14[CCKSwingIndex][7]<<8);
+ }
+
+ write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal);
+ write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2);
+ write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3);
+}
+
+void Hal_MPT_CCKTxPowerAdjustbyIndex(struct adapter *pAdapter, bool beven)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+ struct mpt_context *pMptCtx = &pAdapter->mppriv.MptCtx;
+ struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv);
+ s32 TempCCk;
+ u8 CCK_index, CCK_index_old = 0;
+ u8 Action = 0; /* 0: no action, 1: even->odd, 2:odd->even */
+ s32 i = 0;
+
+
+ if (!IS_92C_SERIAL(pHalData->VersionID))
+ return;
+ if (beven && !pMptCtx->bMptIndexEven) {
+ /* odd->even */
+ Action = 2;
+ pMptCtx->bMptIndexEven = true;
+ } else if (!beven && pMptCtx->bMptIndexEven) {
+ /* even->odd */
+ Action = 1;
+ pMptCtx->bMptIndexEven = false;
+ }
+
+ if (Action != 0) {
+ /* Query CCK default setting From 0xa24 */
+ TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK;
+ for (i = 0; i < CCK_TABLE_SIZE; i++) {
+ if (pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
+ if (_rtw_memcmp((void *)&TempCCk, (void *)&CCKSwingTable_Ch14[i][2], 4)) {
+ CCK_index_old = (u8)i;
+ break;
+ }
+ } else {
+ if (_rtw_memcmp((void *)&TempCCk, (void *)&CCKSwingTable_Ch1_Ch13[i][2], 4)) {
+ CCK_index_old = (u8)i;
+ break;
+ }
+ }
+ }
+
+ if (Action == 1)
+ CCK_index = CCK_index_old - 1;
+ else
+ CCK_index = CCK_index_old + 1;
+
+ /* Adjust CCK according to gain index */
+ if (!pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
+ rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
+ rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
+ rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
+ rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
+ rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
+ rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
+ rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
+ rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
+ } else {
+ rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
+ rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
+ rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
+ rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
+ rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
+ rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
+ rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
+ rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);
+ }
+ }
+}
+/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
+
+/*
+ * SetChannel
+ * Description
+ * Use H2C command to change channel,
+ * not only modify rf register, but also other setting need to be done.
+ */
+void Hal_SetChannel(struct adapter *pAdapter)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+ struct mp_priv *pmp = &pAdapter->mppriv;
+ struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv);
+ u8 eRFPath;
+ u8 channel = pmp->channel;
+
+ /* set RF channel register */
+ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
+ _write_rfreg(pAdapter, eRFPath, ODM_CHANNEL, 0x3FF, channel);
+ Hal_mpt_SwitchRfSetting(pAdapter);
+
+ SelectChannel(pAdapter, channel);
+
+ if (pHalData->CurrentChannel == 14 && !pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
+ pDM_Odm->RFCalibrateInfo.bCCKinCH14 = true;
+ Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14);
+ } else if (pHalData->CurrentChannel != 14 && pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
+ pDM_Odm->RFCalibrateInfo.bCCKinCH14 = false;
+ Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14);
+ }
+}
+
+/*
+ * Notice
+ * Switch bandwitdth may change center frequency(channel)
+ */
+void Hal_SetBandwidth(struct adapter *pAdapter)
+{
+ struct mp_priv *pmp = &pAdapter->mppriv;
+
+
+ SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset);
+ Hal_mpt_SwitchRfSetting(pAdapter);
+}
+
+void Hal_SetCCKTxPower(struct adapter *pAdapter, u8 *TxPower)
+{
+ u32 tmpval = 0;
+
+
+ /* rf-A cck tx power */
+ write_bbreg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, TxPower[RF_PATH_A]);
+ tmpval = (TxPower[RF_PATH_A]<<16) | (TxPower[RF_PATH_A]<<8) | TxPower[RF_PATH_A];
+ write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+ /* rf-B cck tx power */
+ write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]);
+ tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B];
+ write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
+
+ RT_TRACE(_module_mp_, _drv_notice_,
+ ("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n",
+ TxPower[RF_PATH_A], TxPower[RF_PATH_B]));
+}
+
+void Hal_SetOFDMTxPower(struct adapter *pAdapter, u8 *TxPower)
+{
+ u32 TxAGC = 0;
+ u8 tmpval = 0;
+
+ /* HT Tx-rf(A) */
+ tmpval = TxPower[RF_PATH_A];
+ TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;
+
+ write_bbreg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC);
+
+ /* HT Tx-rf(B) */
+ tmpval = TxPower[RF_PATH_B];
+ TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;
+
+ write_bbreg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC);
+ write_bbreg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC);
+}
+
+void Hal_SetAntennaPathPower(struct adapter *pAdapter)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+ u8 TxPowerLevel[MAX_RF_PATH_NUMS];
+ u8 rfPath;
+
+ TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx;
+ TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b;
+
+ switch (pAdapter->mppriv.antenna_tx) {
+ case ANTENNA_A:
+ default:
+ rfPath = RF_PATH_A;
+ break;
+ case ANTENNA_B:
+ rfPath = RF_PATH_B;
+ break;
+ case ANTENNA_C:
+ rfPath = RF_PATH_C;
+ break;
+ }
+
+ switch (pHalData->rf_chip) {
+ case RF_8225:
+ case RF_8256:
+ case RF_6052:
+ Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
+ if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */
+ Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
+ Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
+ break;
+ default:
+ break;
+ }
+}
+
+void Hal_SetTxPower(struct adapter *pAdapter)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+ u8 TxPower = pAdapter->mppriv.txpoweridx;
+ u8 TxPowerLevel[MAX_RF_PATH_NUMS];
+ u8 rf, rfPath;
+
+ for (rf = 0; rf < MAX_RF_PATH_NUMS; rf++)
+ TxPowerLevel[rf] = TxPower;
+
+ switch (pAdapter->mppriv.antenna_tx) {
+ case ANTENNA_A:
+ default:
+ rfPath = RF_PATH_A;
+ break;
+ case ANTENNA_B:
+ rfPath = RF_PATH_B;
+ break;
+ case ANTENNA_C:
+ rfPath = RF_PATH_C;
+ break;
+ }
+
+ switch (pHalData->rf_chip) {
+ /* 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!! */
+ /* We should call normal driver API later!! */
+ case RF_8225:
+ case RF_8256:
+ case RF_6052:
+ Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
+ if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */
+ Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
+ Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
+ break;
+ default:
+ break;
+ }
+}
+
+void Hal_SetDataRate(struct adapter *pAdapter)
+{
+ Hal_mpt_SwitchRfSetting(pAdapter);
+}
+
+void Hal_SetAntenna(struct adapter *pAdapter)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+
+ struct ant_sel_ofdm *p_ofdm_tx; /* OFDM Tx register */
+ struct ant_sel_cck *p_cck_txrx;
+ u8 r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0;
+ u8 chgTx = 0, chgRx = 0;
+ u32 r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0;
+
+
+ p_ofdm_tx = (struct ant_sel_ofdm *)&r_ant_select_ofdm_val;
+ p_cck_txrx = (struct ant_sel_cck *)&r_ant_select_cck_val;
+
+ p_ofdm_tx->r_ant_ht1 = 0x1;
+ p_ofdm_tx->r_ant_ht2 = 0x2; /* Second TX RF path is A */
+ p_ofdm_tx->r_ant_non_ht = 0x3; /* 0x1+0x2=0x3 */
+
+ switch (pAdapter->mppriv.antenna_tx) {
+ case ANTENNA_A:
+ p_ofdm_tx->r_tx_antenna = 0x1;
+ r_ofdm_tx_en_val = 0x1;
+ p_ofdm_tx->r_ant_l = 0x1;
+ p_ofdm_tx->r_ant_ht_s1 = 0x1;
+ p_ofdm_tx->r_ant_non_ht_s1 = 0x1;
+ p_cck_txrx->r_ccktx_enable = 0x8;
+ chgTx = 1;
+
+ /* From SD3 Willis suggestion !!! Set RF A=TX and B as standby */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1);
+ r_ofdm_tx_en_val = 0x3;
+
+ /* Power save */
+
+ /* We need to close RFB by SW control */
+ if (pHalData->rf_type == RF_2T2R) {
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0);
+ }
+ break;
+ case ANTENNA_B:
+ p_ofdm_tx->r_tx_antenna = 0x2;
+ r_ofdm_tx_en_val = 0x2;
+ p_ofdm_tx->r_ant_l = 0x2;
+ p_ofdm_tx->r_ant_ht_s1 = 0x2;
+ p_ofdm_tx->r_ant_non_ht_s1 = 0x2;
+ p_cck_txrx->r_ccktx_enable = 0x4;
+ chgTx = 1;
+ /* From SD3 Willis suggestion !!! Set RF A as standby */
+ PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
+
+ /* Power save */
+ /* cosa r_ant_select_ofdm_val = 0x22222222; */
+
+ /* 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table. */
+ /* 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control */
+ if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R) {
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
+ }
+ break;
+ case ANTENNA_AB: /* For 8192S */
+ p_ofdm_tx->r_tx_antenna = 0x3;
+ r_ofdm_tx_en_val = 0x3;
+ p_ofdm_tx->r_ant_l = 0x3;
+ p_ofdm_tx->r_ant_ht_s1 = 0x3;
+ p_ofdm_tx->r_ant_non_ht_s1 = 0x3;
+ p_cck_txrx->r_ccktx_enable = 0xC;
+ chgTx = 1;
+
+ /* From SD3 Willis suggestion !!! Set RF B as standby */
+ PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
+ PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
+
+ /* Disable Power save */
+ /* cosa r_ant_select_ofdm_val = 0x3321333; */
+ /* 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control */
+ if (pHalData->rf_type == RF_2T2R) {
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
+ PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D */
+ /* r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D */
+ /* r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D */
+ switch (pAdapter->mppriv.antenna_rx) {
+ case ANTENNA_A:
+ r_rx_antenna_ofdm = 0x1; /* A */
+ p_cck_txrx->r_cckrx_enable = 0x0; /* default: A */
+ p_cck_txrx->r_cckrx_enable_2 = 0x0; /* option: A */
+ chgRx = 1;
+ break;
+ case ANTENNA_B:
+ r_rx_antenna_ofdm = 0x2; /* B */
+ p_cck_txrx->r_cckrx_enable = 0x1; /* default: B */
+ p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option: B */
+ chgRx = 1;
+ break;
+ case ANTENNA_AB:
+ r_rx_antenna_ofdm = 0x3; /* AB */
+ p_cck_txrx->r_cckrx_enable = 0x0; /* default:A */
+ p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option:B */
+ chgRx = 1;
+ break;
+ default:
+ break;
+ }
+
+ if (chgTx && chgRx) {
+ switch (pHalData->rf_chip) {
+ case RF_8225:
+ case RF_8256:
+ case RF_6052:
+ /* r_ant_sel_cck_val = r_ant_select_cck_val; */
+ PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val); /* OFDM Tx */
+ PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val); /* OFDM Tx */
+ PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */
+ PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */
+ PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val); /* CCK TxRx */
+
+ break;
+ default:
+ break;
+ }
+ }
+
+ RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
+}
+
+s32 Hal_SetThermalMeter(struct adapter *pAdapter, u8 target_ther)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+
+
+ if (!netif_running(pAdapter->pnetdev)) {
+ RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n"));
+ return _FAIL;
+ }
+
+ if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == false) {
+ RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n"));
+ return _FAIL;
+ }
+
+ target_ther &= 0xff;
+ if (target_ther < 0x07)
+ target_ther = 0x07;
+ else if (target_ther > 0x1d)
+ target_ther = 0x1d;
+
+ pHalData->EEPROMThermalMeter = target_ther;
+
+ return _SUCCESS;
+}
+
+void Hal_TriggerRFThermalMeter(struct adapter *pAdapter)
+{
+ _write_rfreg(pAdapter, RF_PATH_A , RF_T_METER_88E , BIT17 | BIT16 , 0x03);
+}
+
+u8 Hal_ReadRFThermalMeter(struct adapter *pAdapter)
+{
+ u32 ThermalValue = 0;
+
+ ThermalValue = _read_rfreg(pAdapter, RF_PATH_A, RF_T_METER_88E, 0xfc00);
+ return (u8)ThermalValue;
+}
+
+void Hal_GetThermalMeter(struct adapter *pAdapter, u8 *value)
+{
+ Hal_TriggerRFThermalMeter(pAdapter);
+ rtw_msleep_os(1000);
+ *value = Hal_ReadRFThermalMeter(pAdapter);
+}
+
+void Hal_SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart)
+{
+ pAdapter->mppriv.MptCtx.bSingleCarrier = bStart;
+ if (bStart) {
+ /* Start Single Carrier. */
+ RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleCarrierTx: test start\n"));
+ /* 1. if OFDM block on? */
+ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
+ write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */
+
+ /* 2. set CCK test mode off, set to CCK normal mode */
+ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);
+ /* 3. turn on scramble setting */
+ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
+ /* 4. Turn On Single Carrier Tx and turn off the other test modes. */
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
+ /* for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
+ } else {
+ /* Stop Single Carrier. */
+ RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleCarrierTx: test stop\n"));
+
+ /* Turn off all test modes. */
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
+ rtw_msleep_os(10);
+
+ /* BB Reset */
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
+
+ /* Stop for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
+ }
+}
+
+
+void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+ bool is92C = IS_92C_SERIAL(pHalData->VersionID);
+
+ u8 rfPath;
+ u32 reg58 = 0x0;
+ switch (pAdapter->mppriv.antenna_tx) {
+ case ANTENNA_A:
+ default:
+ rfPath = RF_PATH_A;
+ break;
+ case ANTENNA_B:
+ rfPath = RF_PATH_B;
+ break;
+ case ANTENNA_C:
+ rfPath = RF_PATH_C;
+ break;
+ }
+
+ pAdapter->mppriv.MptCtx.bSingleTone = bStart;
+ if (bStart) {
+ /* Start Single Tone. */
+ RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test start\n"));
+ /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
+ if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
+ reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
+ reg58 &= 0xFFFFFFF0;
+ reg58 += 2;
+ PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
+ }
+ PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
+ PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
+
+ if (is92C) {
+ _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01);
+ rtw_usleep_os(100);
+ if (rfPath == RF_PATH_A)
+ write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); /* PAD all on. */
+ else if (rfPath == RF_PATH_B)
+ write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); /* PAD all on. */
+ write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */
+ rtw_usleep_os(100);
+ } else {
+ write_rfreg(pAdapter, rfPath, 0x21, 0xd4000);
+ rtw_usleep_os(100);
+ write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */
+ rtw_usleep_os(100);
+ }
+
+ /* for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
+
+ } else {
+ /* Stop Single Tone. */
+ RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test stop\n"));
+
+ /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
+ /* <20120326, Kordan> Only in single tone mode. (asked by Edlu) */
+ if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
+ reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
+ reg58 &= 0xFFFFFFF0;
+ PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
+ }
+ write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
+ write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
+ if (is92C) {
+ _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00);
+ rtw_usleep_os(100);
+ write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); /* PAD all on. */
+ write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); /* PAD all on. */
+ rtw_usleep_os(100);
+ } else {
+ write_rfreg(pAdapter, rfPath, 0x21, 0x54000);
+ rtw_usleep_os(100);
+ write_rfreg(pAdapter, rfPath, 0x00, 0x30000); /* PAD all on. */
+ rtw_usleep_os(100);
+ }
+
+ /* Stop for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
+ }
+}
+
+
+
+void Hal_SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart)
+{
+ pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart;
+ if (bStart) {
+ /* Start Carrier Suppression. */
+ RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test start\n"));
+ if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) {
+ /* 1. if CCK block on? */
+ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
+ write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */
+
+ /* Turn Off All Test Mode */
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
+
+ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */
+ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0); /* turn off scramble setting */
+
+ /* Set CCK Tx Test Rate */
+ write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); /* Set FTxRate to 1Mbps */
+ }
+
+ /* for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
+ } else {
+ /* Stop Carrier Suppression. */
+ RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test stop\n"));
+ if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) {
+ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */
+ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /* turn on scramble setting */
+
+ /* BB Reset */
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
+ }
+
+ /* Stop for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
+ }
+}
+
+void Hal_SetCCKContinuousTx(struct adapter *pAdapter, u8 bStart)
+{
+ u32 cckrate;
+
+ if (bStart) {
+ RT_TRACE(_module_mp_, _drv_alert_,
+ ("SetCCKContinuousTx: test start\n"));
+
+ /* 1. if CCK block on? */
+ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
+ write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */
+
+ /* Turn Off All Test Mode */
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
+ /* Set CCK Tx Test Rate */
+ cckrate = pAdapter->mppriv.rateidx;
+ write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate);
+ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */
+ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */
+
+ /* for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
+ } else {
+ RT_TRACE(_module_mp_, _drv_info_,
+ ("SetCCKContinuousTx: test stop\n"));
+
+ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */
+ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */
+
+ /* BB Reset */
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
+
+ /* Stop for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
+ }
+
+ pAdapter->mppriv.MptCtx.bCckContTx = bStart;
+ pAdapter->mppriv.MptCtx.bOfdmContTx = false;
+} /* mpt_StartCckContTx */
+
+void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart)
+{
+ if (bStart) {
+ RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n"));
+ /* 1. if OFDM block on? */
+ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
+ write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */
+
+ /* 2. set CCK test mode off, set to CCK normal mode */
+ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);
+
+ /* 3. turn on scramble setting */
+ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
+ /* 4. Turn On Continue Tx and turn off the other test modes. */
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
+
+ /* for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
+
+ } else {
+ RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test stop\n"));
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
+ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
+ /* Delay 10 ms */
+ rtw_msleep_os(10);
+ /* BB Reset */
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
+ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
+
+ /* Stop for dynamic set Power index. */
+ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
+ write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
+ }
+
+ pAdapter->mppriv.MptCtx.bCckContTx = false;
+ pAdapter->mppriv.MptCtx.bOfdmContTx = bStart;
+} /* mpt_StartOfdmContTx */
+
+void Hal_SetContinuousTx(struct adapter *pAdapter, u8 bStart)
+{
+ RT_TRACE(_module_mp_, _drv_info_,
+ ("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx));
+
+ pAdapter->mppriv.MptCtx.bStartContTx = bStart;
+ if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
+ Hal_SetCCKContinuousTx(pAdapter, bStart);
+ else if ((pAdapter->mppriv.rateidx >= MPT_RATE_6M) &&
+ (pAdapter->mppriv.rateidx <= MPT_RATE_MCS15))
+ Hal_SetOFDMContinuousTx(pAdapter, bStart);
+}
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _RTL8188E_PHYCFG_C_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <rtw_iol.h>
+#include <rtl8188e_hal.h>
+
+/*---------------------------Define Local Constant---------------------------*/
+/* Channel switch:The size of command tables for switch channel*/
+#define MAX_PRECMD_CNT 16
+#define MAX_RFDEPENDCMD_CNT 16
+#define MAX_POSTCMD_CNT 16
+
+#define MAX_DOZE_WAITING_TIMES_9x 64
+
+/*---------------------------Define Local Constant---------------------------*/
+
+
+/*------------------------Define global variable-----------------------------*/
+
+/*------------------------Define local variable------------------------------*/
+
+
+/*--------------------Define export function prototype-----------------------*/
+/* Please refer to header file */
+/*--------------------Define export function prototype-----------------------*/
+
+/*----------------------------Function Body----------------------------------*/
+/* */
+/* 1. BB register R/W API */
+/* */
+
+/**
+* Function: phy_CalculateBitShift
+*
+* OverView: Get shifted position of the BitMask
+*
+* Input:
+* u32 BitMask,
+*
+* Output: none
+* Return: u32 Return the shift bit bit position of the mask
+*/
+static u32 phy_CalculateBitShift(u32 BitMask)
+{
+ u32 i;
+
+ for (i = 0; i <= 31; i++) {
+ if (((BitMask>>i) & 0x1) == 1)
+ break;
+ }
+ return i;
+}
+
+/**
+* Function: PHY_QueryBBReg
+*
+* OverView: Read "sepcific bits" from BB register
+*
+* Input:
+* struct adapter *Adapter,
+* u32 RegAddr, The target address to be readback
+* u32 BitMask The target bit position in the target address
+* to be readback
+* Output: None
+* Return: u32 Data The readback register value
+* Note: This function is equal to "GetRegSetting" in PHY programming guide
+*/
+u32
+rtl8188e_PHY_QueryBBReg(
+ struct adapter *Adapter,
+ u32 RegAddr,
+ u32 BitMask
+ )
+{
+ u32 ReturnValue = 0, OriginalValue, BitShift;
+
+ OriginalValue = rtw_read32(Adapter, RegAddr);
+ BitShift = phy_CalculateBitShift(BitMask);
+ ReturnValue = (OriginalValue & BitMask) >> BitShift;
+ return ReturnValue;
+}
+
+
+/**
+* Function: PHY_SetBBReg
+*
+* OverView: Write "Specific bits" to BB register (page 8~)
+*
+* Input:
+* struct adapter *Adapter,
+* u32 RegAddr, The target address to be modified
+* u32 BitMask The target bit position in the target address
+* to be modified
+* u32 Data The new register value in the target bit position
+* of the target address
+*
+* Output: None
+* Return: None
+* Note: This function is equal to "PutRegSetting" in PHY programming guide
+*/
+
+void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr, u32 BitMask, u32 Data)
+{
+ u32 OriginalValue, BitShift;
+
+ if (BitMask != bMaskDWord) { /* if not "double word" write */
+ OriginalValue = rtw_read32(Adapter, RegAddr);
+ BitShift = phy_CalculateBitShift(BitMask);
+ Data = ((OriginalValue & (~BitMask)) | (Data << BitShift));
+ }
+
+ rtw_write32(Adapter, RegAddr, Data);
+}
+
+
+/* */
+/* 2. RF register R/W API */
+/* */
+/**
+* Function: phy_RFSerialRead
+*
+* OverView: Read regster from RF chips
+*
+* Input:
+* struct adapter *Adapter,
+* enum rf_radio_path eRFPath, Radio path of A/B/C/D
+* u32 Offset, The target address to be read
+*
+* Output: None
+* Return: u32 reback value
+* Note: Threre are three types of serial operations:
+* 1. Software serial write
+* 2. Hardware LSSI-Low Speed Serial Interface
+* 3. Hardware HSSI-High speed
+* serial write. Driver need to implement (1) and (2).
+* This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
+*/
+static u32
+phy_RFSerialRead(
+ struct adapter *Adapter,
+ enum rf_radio_path eRFPath,
+ u32 Offset
+ )
+{
+ u32 retValue = 0;
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ struct bb_reg_def *pPhyReg = &pHalData->PHYRegDef[eRFPath];
+ u32 NewOffset;
+ u32 tmplong, tmplong2;
+ u8 RfPiEnable = 0;
+ /* */
+ /* Make sure RF register offset is correct */
+ /* */
+ Offset &= 0xff;
+
+ /* */
+ /* Switch page for 8256 RF IC */
+ /* */
+ NewOffset = Offset;
+
+ /* For 92S LSSI Read RFLSSIRead */
+ /* For RF A/B write 0x824/82c(does not work in the future) */
+ /* We must use 0x824 for RF A and B to execute read trigger */
+ tmplong = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord);
+ if (eRFPath == RF_PATH_A)
+ tmplong2 = tmplong;
+ else
+ tmplong2 = PHY_QueryBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord);
+
+ tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; /* T65 RF */
+
+ PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge));
+ rtw_udelay_os(10);/* PlatformStallExecution(10); */
+
+ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2);
+ rtw_udelay_os(100);/* PlatformStallExecution(100); */
+
+ rtw_udelay_os(10);/* PlatformStallExecution(10); */
+
+ if (eRFPath == RF_PATH_A)
+ RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1, BIT8);
+ else if (eRFPath == RF_PATH_B)
+ RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1, BIT8);
+
+ if (RfPiEnable) { /* Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF */
+ retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData);
+ } else { /* Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF */
+ retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
+ }
+ return retValue;
+}
+
+/**
+* Function: phy_RFSerialWrite
+*
+* OverView: Write data to RF register (page 8~)
+*
+* Input:
+* struct adapter *Adapter,
+* enum rf_radio_path eRFPath, Radio path of A/B/C/D
+* u32 Offset, The target address to be read
+* u32 Data The new register Data in the target bit position
+* of the target to be read
+*
+* Output: None
+* Return: None
+* Note: Threre are three types of serial operations:
+* 1. Software serial write
+* 2. Hardware LSSI-Low Speed Serial Interface
+* 3. Hardware HSSI-High speed
+* serial write. Driver need to implement (1) and (2).
+* This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
+ *
+ * Note: For RF8256 only
+ * The total count of RTL8256(Zebra4) register is around 36 bit it only employs
+ * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10])
+ * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
+ * programming guide" for more details.
+ * Thus, we define a sub-finction for RTL8526 register address conversion
+ * ===========================================================
+ * Register Mode RegCTL[1] RegCTL[0] Note
+ * (Reg00[12]) (Reg00[10])
+ * ===========================================================
+ * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf)
+ * ------------------------------------------------------------------
+ * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf)
+ * ------------------------------------------------------------------
+ * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf)
+ * ------------------------------------------------------------------
+ *
+ * 2008/09/02 MH Add 92S RF definition
+ *
+ *
+ *
+*/
+static void
+phy_RFSerialWrite(
+ struct adapter *Adapter,
+ enum rf_radio_path eRFPath,
+ u32 Offset,
+ u32 Data
+ )
+{
+ u32 DataAndAddr = 0;
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ struct bb_reg_def *pPhyReg = &pHalData->PHYRegDef[eRFPath];
+ u32 NewOffset;
+
+
+ /* 2009/06/17 MH We can not execute IO for power save or other accident mode. */
+
+ Offset &= 0xff;
+
+ /* */
+ /* Switch page for 8256 RF IC */
+ /* */
+ NewOffset = Offset;
+
+ /* */
+ /* Put write addr in [5:0] and write data in [31:16] */
+ /* */
+ DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; /* T65 RF */
+
+ /* */
+ /* Write Operation */
+ /* */
+ PHY_SetBBReg(Adapter, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
+}
+
+/**
+* Function: PHY_QueryRFReg
+*
+* OverView: Query "Specific bits" to RF register (page 8~)
+*
+* Input:
+* struct adapter *Adapter,
+* enum rf_radio_path eRFPath, Radio path of A/B/C/D
+* u32 RegAddr, The target address to be read
+* u32 BitMask The target bit position in the target address
+* to be read
+*
+* Output: None
+* Return: u32 Readback value
+* Note: This function is equal to "GetRFRegSetting" in PHY programming guide
+*/
+u32 rtl8188e_PHY_QueryRFReg(struct adapter *Adapter, enum rf_radio_path eRFPath,
+ u32 RegAddr, u32 BitMask)
+{
+ u32 Original_Value, Readback_Value, BitShift;
+
+ Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr);
+
+ BitShift = phy_CalculateBitShift(BitMask);
+ Readback_Value = (Original_Value & BitMask) >> BitShift;
+ return Readback_Value;
+}
+
+/**
+* Function: PHY_SetRFReg
+*
+* OverView: Write "Specific bits" to RF register (page 8~)
+*
+* Input:
+* struct adapter *Adapter,
+* enum rf_radio_path eRFPath, Radio path of A/B/C/D
+* u32 RegAddr, The target address to be modified
+* u32 BitMask The target bit position in the target address
+* to be modified
+* u32 Data The new register Data in the target bit position
+* of the target address
+*
+* Output: None
+* Return: None
+* Note: This function is equal to "PutRFRegSetting" in PHY programming guide
+*/
+void
+rtl8188e_PHY_SetRFReg(
+ struct adapter *Adapter,
+ enum rf_radio_path eRFPath,
+ u32 RegAddr,
+ u32 BitMask,
+ u32 Data
+ )
+{
+ u32 Original_Value, BitShift;
+
+ /* RF data is 12 bits only */
+ if (BitMask != bRFRegOffsetMask) {
+ Original_Value = phy_RFSerialRead(Adapter, eRFPath, RegAddr);
+ BitShift = phy_CalculateBitShift(BitMask);
+ Data = ((Original_Value & (~BitMask)) | (Data << BitShift));
+ }
+
+ phy_RFSerialWrite(Adapter, eRFPath, RegAddr, Data);
+}
+
+/* */
+/* 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt. */
+/* */
+
+/*-----------------------------------------------------------------------------
+ * Function: PHY_MACConfig8192C
+ *
+ * Overview: Condig MAC by header file or parameter file.
+ *
+ * Input: NONE
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 08/12/2008 MHC Create Version 0.
+ *
+ *---------------------------------------------------------------------------*/
+s32 PHY_MACConfig8188E(struct adapter *Adapter)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ int rtStatus = _SUCCESS;
+
+ /* */
+ /* Config MAC */
+ /* */
+ if (HAL_STATUS_FAILURE == ODM_ConfigMACWithHeaderFile(&pHalData->odmpriv))
+ rtStatus = _FAIL;
+
+ /* 2010.07.13 AMPDU aggregation number B */
+ rtw_write16(Adapter, REG_MAX_AGGR_NUM, MAX_AGGR_NUM);
+
+ return rtStatus;
+}
+
+/**
+* Function: phy_InitBBRFRegisterDefinition
+*
+* OverView: Initialize Register definition offset for Radio Path A/B/C/D
+*
+* Input:
+* struct adapter *Adapter,
+*
+* Output: None
+* Return: None
+* Note: The initialization value is constant and it should never be changes
+*/
+static void
+phy_InitBBRFRegisterDefinition(
+ struct adapter *Adapter
+)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+
+ /* RF Interface Sowrtware Control */
+ pHalData->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 LSBs if read 32-bit from 0x870 */
+ pHalData->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) */
+ pHalData->PHYRegDef[RF_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;/* 16 LSBs if read 32-bit from 0x874 */
+ pHalData->PHYRegDef[RF_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;/* 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) */
+
+ /* RF Interface Readback Value */
+ pHalData->PHYRegDef[RF_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; /* 16 LSBs if read 32-bit from 0x8E0 */
+ pHalData->PHYRegDef[RF_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;/* 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) */
+ pHalData->PHYRegDef[RF_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;/* 16 LSBs if read 32-bit from 0x8E4 */
+ pHalData->PHYRegDef[RF_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;/* 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) */
+
+ /* RF Interface Output (and Enable) */
+ pHalData->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; /* 16 LSBs if read 32-bit from 0x860 */
+ pHalData->PHYRegDef[RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; /* 16 LSBs if read 32-bit from 0x864 */
+
+ /* RF Interface (Output and) Enable */
+ pHalData->PHYRegDef[RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; /* 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) */
+ pHalData->PHYRegDef[RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; /* 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) */
+
+ /* Addr of LSSI. Wirte RF register by driver */
+ pHalData->PHYRegDef[RF_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; /* LSSI Parameter */
+ pHalData->PHYRegDef[RF_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
+
+ /* RF parameter */
+ pHalData->PHYRegDef[RF_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; /* BB Band Select */
+ pHalData->PHYRegDef[RF_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
+ pHalData->PHYRegDef[RF_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
+ pHalData->PHYRegDef[RF_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
+
+ /* Tx AGC Gain Stage (same for all path. Should we remove this?) */
+ pHalData->PHYRegDef[RF_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
+ pHalData->PHYRegDef[RF_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
+ pHalData->PHYRegDef[RF_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
+ pHalData->PHYRegDef[RF_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; /* Tx gain stage */
+
+ /* Tranceiver A~D HSSI Parameter-1 */
+ pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; /* wire control parameter1 */
+ pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; /* wire control parameter1 */
+
+ /* Tranceiver A~D HSSI Parameter-2 */
+ pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; /* wire control parameter2 */
+ pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; /* wire control parameter2 */
+
+ /* RF switch Control */
+ pHalData->PHYRegDef[RF_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; /* TR/Ant switch control */
+ pHalData->PHYRegDef[RF_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
+ pHalData->PHYRegDef[RF_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
+ pHalData->PHYRegDef[RF_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
+
+ /* AGC control 1 */
+ pHalData->PHYRegDef[RF_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
+ pHalData->PHYRegDef[RF_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
+ pHalData->PHYRegDef[RF_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
+ pHalData->PHYRegDef[RF_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
+
+ /* AGC control 2 */
+ pHalData->PHYRegDef[RF_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
+ pHalData->PHYRegDef[RF_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
+ pHalData->PHYRegDef[RF_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
+ pHalData->PHYRegDef[RF_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
+
+ /* RX AFE control 1 */
+ pHalData->PHYRegDef[RF_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
+ pHalData->PHYRegDef[RF_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
+ pHalData->PHYRegDef[RF_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
+ pHalData->PHYRegDef[RF_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;
+
+ /* RX AFE control 1 */
+ pHalData->PHYRegDef[RF_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
+ pHalData->PHYRegDef[RF_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
+ pHalData->PHYRegDef[RF_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
+ pHalData->PHYRegDef[RF_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;
+
+ /* Tx AFE control 1 */
+ pHalData->PHYRegDef[RF_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
+ pHalData->PHYRegDef[RF_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
+ pHalData->PHYRegDef[RF_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
+ pHalData->PHYRegDef[RF_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;
+
+ /* Tx AFE control 2 */
+ pHalData->PHYRegDef[RF_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
+ pHalData->PHYRegDef[RF_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
+ pHalData->PHYRegDef[RF_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
+ pHalData->PHYRegDef[RF_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;
+
+ /* Tranceiver LSSI Readback SI mode */
+ pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
+ pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
+ pHalData->PHYRegDef[RF_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
+ pHalData->PHYRegDef[RF_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack;
+
+ /* Tranceiver LSSI Readback PI mode */
+ pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
+ pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback;
+}
+
+void storePwrIndexDiffRateOffset(struct adapter *Adapter, u32 RegAddr, u32 BitMask, u32 Data)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+
+ if (RegAddr == rTxAGC_A_Rate18_06)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][0] = Data;
+ if (RegAddr == rTxAGC_A_Rate54_24)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][1] = Data;
+ if (RegAddr == rTxAGC_A_CCK1_Mcs32)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][6] = Data;
+ if (RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0xffffff00)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][7] = Data;
+ if (RegAddr == rTxAGC_A_Mcs03_Mcs00)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][2] = Data;
+ if (RegAddr == rTxAGC_A_Mcs07_Mcs04)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][3] = Data;
+ if (RegAddr == rTxAGC_A_Mcs11_Mcs08)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][4] = Data;
+ if (RegAddr == rTxAGC_A_Mcs15_Mcs12) {
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][5] = Data;
+ if (pHalData->rf_type == RF_1T1R)
+ pHalData->pwrGroupCnt++;
+ }
+ if (RegAddr == rTxAGC_B_Rate18_06)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][8] = Data;
+ if (RegAddr == rTxAGC_B_Rate54_24)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][9] = Data;
+ if (RegAddr == rTxAGC_B_CCK1_55_Mcs32)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][14] = Data;
+ if (RegAddr == rTxAGC_B_CCK11_A_CCK2_11 && BitMask == 0x000000ff)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][15] = Data;
+ if (RegAddr == rTxAGC_B_Mcs03_Mcs00)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][10] = Data;
+ if (RegAddr == rTxAGC_B_Mcs07_Mcs04)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][11] = Data;
+ if (RegAddr == rTxAGC_B_Mcs11_Mcs08)
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][12] = Data;
+ if (RegAddr == rTxAGC_B_Mcs15_Mcs12) {
+ pHalData->MCSTxPowerLevelOriginalOffset[pHalData->pwrGroupCnt][13] = Data;
+ if (pHalData->rf_type != RF_1T1R)
+ pHalData->pwrGroupCnt++;
+ }
+}
+
+static int phy_BB8188E_Config_ParaFile(struct adapter *Adapter)
+{
+ struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter);
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ int rtStatus = _SUCCESS;
+
+ /* */
+ /* 1. Read PHY_REG.TXT BB INIT!! */
+ /* We will seperate as 88C / 92C according to chip version */
+ /* */
+ if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG))
+ rtStatus = _FAIL;
+ if (rtStatus != _SUCCESS)
+ goto phy_BB8190_Config_ParaFile_Fail;
+
+ /* 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt */
+ if (!pEEPROM->bautoload_fail_flag) {
+ pHalData->pwrGroupCnt = 0;
+
+ if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG_PG))
+ rtStatus = _FAIL;
+ }
+
+ if (rtStatus != _SUCCESS)
+ goto phy_BB8190_Config_ParaFile_Fail;
+
+ /* 3. BB AGC table Initialization */
+ if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_AGC_TAB))
+ rtStatus = _FAIL;
+
+ if (rtStatus != _SUCCESS)
+ goto phy_BB8190_Config_ParaFile_Fail;
+
+phy_BB8190_Config_ParaFile_Fail:
+
+ return rtStatus;
+}
+
+int
+PHY_BBConfig8188E(
+ struct adapter *Adapter
+ )
+{
+ int rtStatus = _SUCCESS;
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u32 RegVal;
+ u8 CrystalCap;
+
+ phy_InitBBRFRegisterDefinition(Adapter);
+
+
+ /* Enable BB and RF */
+ RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN);
+ rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1));
+
+ /* 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. */
+
+ rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB);
+
+ rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB);
+
+ /* Config BB and AGC */
+ rtStatus = phy_BB8188E_Config_ParaFile(Adapter);
+
+ /* write 0x24[16:11] = 0x24[22:17] = CrystalCap */
+ CrystalCap = pHalData->CrystalCap & 0x3F;
+ PHY_SetBBReg(Adapter, REG_AFE_XTAL_CTRL, 0x7ff800, (CrystalCap | (CrystalCap << 6)));
+
+ return rtStatus;
+}
+
+int PHY_RFConfig8188E(struct adapter *Adapter)
+{
+ int rtStatus = _SUCCESS;
+
+ /* RF config */
+ rtStatus = PHY_RF6052_Config8188E(Adapter);
+ return rtStatus;
+}
+
+
+/*-----------------------------------------------------------------------------
+ * Function: PHY_ConfigRFWithParaFile()
+ *
+ * Overview: This function read RF parameters from general file format, and do RF 3-wire
+ *
+ * Input: struct adapter *Adapter
+ * ps8 pFileName
+ * enum rf_radio_path eRFPath
+ *
+ * Output: NONE
+ *
+ * Return: RT_STATUS_SUCCESS: configuration file exist
+ *
+ * Note: Delay may be required for RF configuration
+ *---------------------------------------------------------------------------*/
+int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *Adapter, u8 *pFileName, enum rf_radio_path eRFPath)
+{
+ return _SUCCESS;
+}
+
+void
+rtl8192c_PHY_GetHWRegOriginalValue(
+ struct adapter *Adapter
+ )
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+
+ /* read rx initial gain */
+ pHalData->DefaultInitialGain[0] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XAAGCCore1, bMaskByte0);
+ pHalData->DefaultInitialGain[1] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XBAGCCore1, bMaskByte0);
+ pHalData->DefaultInitialGain[2] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XCAGCCore1, bMaskByte0);
+ pHalData->DefaultInitialGain[3] = (u8)PHY_QueryBBReg(Adapter, rOFDM0_XDAGCCore1, bMaskByte0);
+
+ /* read framesync */
+ pHalData->framesync = (u8)PHY_QueryBBReg(Adapter, rOFDM0_RxDetector3, bMaskByte0);
+ pHalData->framesyncC34 = PHY_QueryBBReg(Adapter, rOFDM0_RxDetector2, bMaskDWord);
+}
+
+/* */
+/* Description: */
+/* Map dBm into Tx power index according to */
+/* current HW model, for example, RF and PA, and */
+/* current wireless mode. */
+/* By Bruce, 2008-01-29. */
+/* */
+static u8 phy_DbmToTxPwrIdx(struct adapter *Adapter, enum wireless_mode WirelessMode, int PowerInDbm)
+{
+ u8 TxPwrIdx = 0;
+ int Offset = 0;
+
+
+ /* */
+ /* Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to */
+ /* 3dbm, and OFDM HT equals to 0dbm repectively. */
+ /* Note: */
+ /* The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */
+ /* By Bruce, 2008-01-29. */
+ /* */
+ switch (WirelessMode) {
+ case WIRELESS_MODE_B:
+ Offset = -7;
+ break;
+
+ case WIRELESS_MODE_G:
+ case WIRELESS_MODE_N_24G:
+ default:
+ Offset = -8;
+ break;
+ }
+
+ if ((PowerInDbm - Offset) > 0)
+ TxPwrIdx = (u8)((PowerInDbm - Offset) * 2);
+ else
+ TxPwrIdx = 0;
+
+ /* Tx Power Index is too large. */
+ if (TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S)
+ TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S;
+
+ return TxPwrIdx;
+}
+
+/* */
+/* Description: */
+/* Map Tx power index into dBm according to */
+/* current HW model, for example, RF and PA, and */
+/* current wireless mode. */
+/* By Bruce, 2008-01-29. */
+/* */
+static int phy_TxPwrIdxToDbm(struct adapter *Adapter, enum wireless_mode WirelessMode, u8 TxPwrIdx)
+{
+ int Offset = 0;
+ int PwrOutDbm = 0;
+
+ /* */
+ /* Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to -8dbm. */
+ /* Note: */
+ /* The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */
+ /* By Bruce, 2008-01-29. */
+ /* */
+ switch (WirelessMode) {
+ case WIRELESS_MODE_B:
+ Offset = -7;
+ break;
+ case WIRELESS_MODE_G:
+ case WIRELESS_MODE_N_24G:
+ default:
+ Offset = -8;
+ break;
+ }
+
+ PwrOutDbm = TxPwrIdx / 2 + Offset; /* Discard the decimal part. */
+
+ return PwrOutDbm;
+}
+
+
+/*-----------------------------------------------------------------------------
+ * Function: GetTxPowerLevel8190()
+ *
+ * Overview: This function is export to "common" moudule
+ *
+ * Input: struct adapter *Adapter
+ * psByte Power Level
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ *---------------------------------------------------------------------------*/
+void PHY_GetTxPowerLevel8188E(struct adapter *Adapter, u32 *powerlevel)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u8 TxPwrLevel = 0;
+ int TxPwrDbm;
+
+ /* */
+ /* Because the Tx power indexes are different, we report the maximum of them to */
+ /* meet the CCX TPC request. By Bruce, 2008-01-31. */
+ /* */
+
+ /* CCK */
+ TxPwrLevel = pHalData->CurrentCckTxPwrIdx;
+ TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_B, TxPwrLevel);
+
+ /* Legacy OFDM */
+ TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx + pHalData->LegacyHTTxPowerDiff;
+
+ /* Compare with Legacy OFDM Tx power. */
+ if (phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm)
+ TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_G, TxPwrLevel);
+
+ /* HT OFDM */
+ TxPwrLevel = pHalData->CurrentOfdm24GTxPwrIdx;
+
+ /* Compare with HT OFDM Tx power. */
+ if (phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm)
+ TxPwrDbm = phy_TxPwrIdxToDbm(Adapter, WIRELESS_MODE_N_24G, TxPwrLevel);
+
+ *powerlevel = TxPwrDbm;
+}
+
+static void getTxPowerIndex88E(struct adapter *Adapter, u8 channel, u8 *cckPowerLevel,
+ u8 *ofdmPowerLevel, u8 *BW20PowerLevel,
+ u8 *BW40PowerLevel)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u8 index = (channel - 1);
+ u8 TxCount = 0, path_nums;
+
+ if ((RF_1T2R == pHalData->rf_type) || (RF_1T1R == pHalData->rf_type))
+ path_nums = 1;
+ else
+ path_nums = 2;
+
+ for (TxCount = 0; TxCount < path_nums; TxCount++) {
+ if (TxCount == RF_PATH_A) {
+ /* 1. CCK */
+ cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index];
+ /* 2. OFDM */
+ ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->OFDM_24G_Diff[TxCount][RF_PATH_A];
+ /* 1. BW20 */
+ BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[TxCount][RF_PATH_A];
+ /* 2. BW40 */
+ BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index];
+ } else if (TxCount == RF_PATH_B) {
+ /* 1. CCK */
+ cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index];
+ /* 2. OFDM */
+ ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[TxCount][index];
+ /* 1. BW20 */
+ BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[TxCount][RF_PATH_A]+
+ pHalData->BW20_24G_Diff[TxCount][index];
+ /* 2. BW40 */
+ BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index];
+ } else if (TxCount == RF_PATH_C) {
+ /* 1. CCK */
+ cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index];
+ /* 2. OFDM */
+ ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_B][index]+
+ pHalData->BW20_24G_Diff[TxCount][index];
+ /* 1. BW20 */
+ BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_B][index]+
+ pHalData->BW20_24G_Diff[TxCount][index];
+ /* 2. BW40 */
+ BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index];
+ } else if (TxCount == RF_PATH_D) {
+ /* 1. CCK */
+ cckPowerLevel[TxCount] = pHalData->Index24G_CCK_Base[TxCount][index];
+ /* 2. OFDM */
+ ofdmPowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_B][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_C][index]+
+ pHalData->BW20_24G_Diff[TxCount][index];
+
+ /* 1. BW20 */
+ BW20PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_A][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_B][index]+
+ pHalData->BW20_24G_Diff[RF_PATH_C][index]+
+ pHalData->BW20_24G_Diff[TxCount][index];
+
+ /* 2. BW40 */
+ BW40PowerLevel[TxCount] = pHalData->Index24G_BW40_Base[TxCount][index];
+ }
+ }
+}
+
+static void phy_PowerIndexCheck88E(struct adapter *Adapter, u8 channel, u8 *cckPowerLevel,
+ u8 *ofdmPowerLevel, u8 *BW20PowerLevel, u8 *BW40PowerLevel)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+
+ pHalData->CurrentCckTxPwrIdx = cckPowerLevel[0];
+ pHalData->CurrentOfdm24GTxPwrIdx = ofdmPowerLevel[0];
+ pHalData->CurrentBW2024GTxPwrIdx = BW20PowerLevel[0];
+ pHalData->CurrentBW4024GTxPwrIdx = BW40PowerLevel[0];
+}
+
+/*-----------------------------------------------------------------------------
+ * Function: SetTxPowerLevel8190()
+ *
+ * Overview: This function is export to "HalCommon" moudule
+ * We must consider RF path later!!!!!!!
+ *
+ * Input: struct adapter *Adapter
+ * u8 channel
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ * 2008/11/04 MHC We remove EEPROM_93C56.
+ * We need to move CCX relative code to independet file.
+ * 2009/01/21 MHC Support new EEPROM format from SD3 requirement.
+ *
+ *---------------------------------------------------------------------------*/
+void
+PHY_SetTxPowerLevel8188E(
+ struct adapter *Adapter,
+ u8 channel
+ )
+{
+ u8 cckPowerLevel[MAX_TX_COUNT] = {0};
+ u8 ofdmPowerLevel[MAX_TX_COUNT] = {0};/* [0]:RF-A, [1]:RF-B */
+ u8 BW20PowerLevel[MAX_TX_COUNT] = {0};
+ u8 BW40PowerLevel[MAX_TX_COUNT] = {0};
+
+ getTxPowerIndex88E(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0], &BW20PowerLevel[0], &BW40PowerLevel[0]);
+
+ phy_PowerIndexCheck88E(Adapter, channel, &cckPowerLevel[0], &ofdmPowerLevel[0], &BW20PowerLevel[0], &BW40PowerLevel[0]);
+
+ rtl8188e_PHY_RF6052SetCckTxPower(Adapter, &cckPowerLevel[0]);
+ rtl8188e_PHY_RF6052SetOFDMTxPower(Adapter, &ofdmPowerLevel[0], &BW20PowerLevel[0], &BW40PowerLevel[0], channel);
+}
+
+/* */
+/* Description: */
+/* Update transmit power level of all channel supported. */
+/* */
+/* TODO: */
+/* A mode. */
+/* By Bruce, 2008-02-04. */
+/* */
+bool
+PHY_UpdateTxPowerDbm8188E(
+ struct adapter *Adapter,
+ int powerInDbm
+ )
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u8 idx;
+ u8 rf_path;
+
+ /* TODO: A mode Tx power. */
+ u8 CckTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_B, powerInDbm);
+ u8 OfdmTxPwrIdx = phy_DbmToTxPwrIdx(Adapter, WIRELESS_MODE_N_24G, powerInDbm);
+
+ if (OfdmTxPwrIdx - pHalData->LegacyHTTxPowerDiff > 0)
+ OfdmTxPwrIdx -= pHalData->LegacyHTTxPowerDiff;
+ else
+ OfdmTxPwrIdx = 0;
+
+ for (idx = 0; idx < 14; idx++) {
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ pHalData->TxPwrLevelCck[rf_path][idx] = CckTxPwrIdx;
+ pHalData->TxPwrLevelHT40_1S[rf_path][idx] =
+ pHalData->TxPwrLevelHT40_2S[rf_path][idx] = OfdmTxPwrIdx;
+ }
+ }
+ return true;
+}
+
+void
+PHY_ScanOperationBackup8188E(
+ struct adapter *Adapter,
+ u8 Operation
+ )
+{
+}
+
+/*-----------------------------------------------------------------------------
+ * Function: PHY_SetBWModeCallback8192C()
+ *
+ * Overview: Timer callback function for SetSetBWMode
+ *
+ * Input: PRT_TIMER pTimer
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Note: (1) We do not take j mode into consideration now
+ * (2) Will two workitem of "switch channel" and "switch channel bandwidth" run
+ * concurrently?
+ *---------------------------------------------------------------------------*/
+static void
+_PHY_SetBWMode92C(
+ struct adapter *Adapter
+)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u8 regBwOpMode;
+ u8 regRRSR_RSC;
+
+ if (pHalData->rf_chip == RF_PSEUDO_11N)
+ return;
+
+ /* There is no 40MHz mode in RF_8225. */
+ if (pHalData->rf_chip == RF_8225)
+ return;
+
+ if (Adapter->bDriverStopped)
+ return;
+
+ /* 3 */
+ /* 3<1>Set MAC register */
+ /* 3 */
+
+ regBwOpMode = rtw_read8(Adapter, REG_BWOPMODE);
+ regRRSR_RSC = rtw_read8(Adapter, REG_RRSR+2);
+
+ switch (pHalData->CurrentChannelBW) {
+ case HT_CHANNEL_WIDTH_20:
+ regBwOpMode |= BW_OPMODE_20MHZ;
+ /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+ rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
+ break;
+ case HT_CHANNEL_WIDTH_40:
+ regBwOpMode &= ~BW_OPMODE_20MHZ;
+ /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+ rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
+ regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5);
+ rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
+ break;
+ default:
+ break;
+ }
+
+ /* 3 */
+ /* 3 <2>Set PHY related register */
+ /* 3 */
+ switch (pHalData->CurrentChannelBW) {
+ /* 20 MHz channel*/
+ case HT_CHANNEL_WIDTH_20:
+ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x0);
+ PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0);
+ break;
+ /* 40 MHz channel*/
+ case HT_CHANNEL_WIDTH_40:
+ PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x1);
+ PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x1);
+ /* Set Control channel to upper or lower. These settings are required only for 40MHz */
+ PHY_SetBBReg(Adapter, rCCK0_System, bCCKSideBand, (pHalData->nCur40MhzPrimeSC>>1));
+ PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0xC00, pHalData->nCur40MhzPrimeSC);
+ PHY_SetBBReg(Adapter, 0x818, (BIT26 | BIT27),
+ (pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
+ break;
+ default:
+ break;
+ }
+ /* Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 */
+
+ /* 3<3>Set RF related register */
+ switch (pHalData->rf_chip) {
+ case RF_8225:
+ break;
+ case RF_8256:
+ /* Please implement this function in Hal8190PciPhy8256.c */
+ break;
+ case RF_8258:
+ /* Please implement this function in Hal8190PciPhy8258.c */
+ break;
+ case RF_PSEUDO_11N:
+ break;
+ case RF_6052:
+ rtl8188e_PHY_RF6052SetBandwidth(Adapter, pHalData->CurrentChannelBW);
+ break;
+ default:
+ break;
+ }
+}
+
+ /*-----------------------------------------------------------------------------
+ * Function: SetBWMode8190Pci()
+ *
+ * Overview: This function is export to "HalCommon" moudule
+ *
+ * Input: struct adapter *Adapter
+ * enum ht_channel_width Bandwidth 20M or 40M
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Note: We do not take j mode into consideration now
+ *---------------------------------------------------------------------------*/
+void PHY_SetBWMode8188E(struct adapter *Adapter, enum ht_channel_width Bandwidth, /* 20M or 40M */
+ unsigned char Offset) /* Upper, Lower, or Don't care */
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ enum ht_channel_width tmpBW = pHalData->CurrentChannelBW;
+
+ pHalData->CurrentChannelBW = Bandwidth;
+
+ pHalData->nCur40MhzPrimeSC = Offset;
+
+ if ((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved))
+ _PHY_SetBWMode92C(Adapter);
+ else
+ pHalData->CurrentChannelBW = tmpBW;
+}
+
+static void _PHY_SwChnl8192C(struct adapter *Adapter, u8 channel)
+{
+ u8 eRFPath;
+ u32 param1, param2;
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+
+ if (Adapter->bNotifyChannelChange)
+ DBG_88E("[%s] ch = %d\n", __func__, channel);
+
+ /* s1. pre common command - CmdID_SetTxPowerLevel */
+ PHY_SetTxPowerLevel8188E(Adapter, channel);
+
+ /* s2. RF dependent command - CmdID_RF_WriteReg, param1=RF_CHNLBW, param2=channel */
+ param1 = RF_CHNLBW;
+ param2 = channel;
+ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) {
+ pHalData->RfRegChnlVal[eRFPath] = ((pHalData->RfRegChnlVal[eRFPath] & 0xfffffc00) | param2);
+ PHY_SetRFReg(Adapter, (enum rf_radio_path)eRFPath, param1, bRFRegOffsetMask, pHalData->RfRegChnlVal[eRFPath]);
+ }
+}
+
+void PHY_SwChnl8188E(struct adapter *Adapter, u8 channel)
+{
+ /* Call after initialization */
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u8 tmpchannel = pHalData->CurrentChannel;
+ bool bResult = true;
+
+ if (pHalData->rf_chip == RF_PSEUDO_11N)
+ return; /* return immediately if it is peudo-phy */
+
+ if (channel == 0)
+ channel = 1;
+
+ pHalData->CurrentChannel = channel;
+
+ if ((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) {
+ _PHY_SwChnl8192C(Adapter, channel);
+
+ if (bResult)
+ ;
+ else
+ pHalData->CurrentChannel = tmpchannel;
+
+ } else {
+ pHalData->CurrentChannel = tmpchannel;
+ }
+}
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/******************************************************************************
+ *
+ *
+ * Module: rtl8192c_rf6052.c ( Source C File)
+ *
+ * Note: Provide RF 6052 series relative API.
+ *
+ * Function:
+ *
+ * Export:
+ *
+ * Abbrev:
+ *
+ * History:
+ * Data Who Remark
+ *
+ * 09/25/2008 MHC Create initial version.
+ * 11/05/2008 MHC Add API for tw power setting.
+ *
+ *
+******************************************************************************/
+
+#define _RTL8188E_RF6052_C_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#include <rtl8188e_hal.h>
+
+/*---------------------------Define Local Constant---------------------------*/
+/* Define local structure for debug!!!!! */
+struct rf_shadow {
+ /* Shadow register value */
+ u32 Value;
+ /* Compare or not flag */
+ u8 Compare;
+ /* Record If it had ever modified unpredicted */
+ u8 ErrorOrNot;
+ /* Recorver Flag */
+ u8 Recorver;
+ /* */
+ u8 Driver_Write;
+};
+
+/*---------------------------Define Local Constant---------------------------*/
+
+
+/*------------------------Define global variable-----------------------------*/
+
+/*------------------------Define local variable------------------------------*/
+
+/*-----------------------------------------------------------------------------
+ * Function: RF_ChangeTxPath
+ *
+ * Overview: For RL6052, we must change some RF settign for 1T or 2T.
+ *
+ * Input: u16 DataRate 0x80-8f, 0x90-9f
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 09/25/2008 MHC Create Version 0.
+ * Firmwaer support the utility later.
+ *
+ *---------------------------------------------------------------------------*/
+void rtl8188e_RF_ChangeTxPath(struct adapter *Adapter, u16 DataRate)
+{
+/* We do not support gain table change inACUT now !!!! Delete later !!! */
+} /* RF_ChangeTxPath */
+
+
+/*-----------------------------------------------------------------------------
+ * Function: PHY_RF6052SetBandwidth()
+ *
+ * Overview: This function is called by SetBWModeCallback8190Pci() only
+ *
+ * Input: struct adapter *Adapter
+ * WIRELESS_BANDWIDTH_E Bandwidth 20M or 40M
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Note: For RF type 0222D
+ *---------------------------------------------------------------------------*/
+void rtl8188e_PHY_RF6052SetBandwidth(struct adapter *Adapter,
+ enum ht_channel_width Bandwidth)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+
+ switch (Bandwidth) {
+ case HT_CHANNEL_WIDTH_20:
+ pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | BIT(10) | BIT(11));
+ PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+ break;
+ case HT_CHANNEL_WIDTH_40:
+ pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff3ff) | BIT(10));
+ PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, pHalData->RfRegChnlVal[0]);
+ break;
+ default:
+ break;
+ }
+}
+
+/*-----------------------------------------------------------------------------
+ * Function: PHY_RF6052SetCckTxPower
+ *
+ * Overview:
+ *
+ * Input: NONE
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 11/05/2008 MHC Simulate 8192series..
+ *
+ *---------------------------------------------------------------------------*/
+
+void
+rtl8188e_PHY_RF6052SetCckTxPower(
+ struct adapter *Adapter,
+ u8 *pPowerlevel)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ struct dm_priv *pdmpriv = &pHalData->dmpriv;
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ u32 TxAGC[2] = {0, 0}, tmpval = 0, pwrtrac_value;
+ bool TurboScanOff = false;
+ u8 idx1, idx2;
+ u8 *ptr;
+ u8 direction;
+ /* FOR CE ,must disable turbo scan */
+ TurboScanOff = true;
+
+
+ if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) {
+ TxAGC[RF_PATH_A] = 0x3f3f3f3f;
+ TxAGC[RF_PATH_B] = 0x3f3f3f3f;
+
+ TurboScanOff = true;/* disable turbo scan */
+
+ if (TurboScanOff) {
+ for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
+ TxAGC[idx1] =
+ pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
+ (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
+ /* 2010/10/18 MH For external PA module. We need to limit power index to be less than 0x20. */
+ if (TxAGC[idx1] > 0x20 && pHalData->ExternalPA)
+ TxAGC[idx1] = 0x20;
+ }
+ }
+ } else {
+ /* Driver dynamic Tx power shall not affect Tx power.
+ * It shall be determined by power training mechanism.
+i * Currently, we cannot fully disable driver dynamic
+ * tx power mechanism because it is referenced by BT
+ * coexist mechanism.
+ * In the future, two mechanism shall be separated from
+ * each other and maintained independantly. */
+ if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
+ TxAGC[RF_PATH_A] = 0x10101010;
+ TxAGC[RF_PATH_B] = 0x10101010;
+ } else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2) {
+ TxAGC[RF_PATH_A] = 0x00000000;
+ TxAGC[RF_PATH_B] = 0x00000000;
+ } else {
+ for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
+ TxAGC[idx1] =
+ pPowerlevel[idx1] | (pPowerlevel[idx1]<<8) |
+ (pPowerlevel[idx1]<<16) | (pPowerlevel[idx1]<<24);
+ }
+ if (pHalData->EEPROMRegulatory == 0) {
+ tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][6]) +
+ (pHalData->MCSTxPowerLevelOriginalOffset[0][7]<<8);
+ TxAGC[RF_PATH_A] += tmpval;
+
+ tmpval = (pHalData->MCSTxPowerLevelOriginalOffset[0][14]) +
+ (pHalData->MCSTxPowerLevelOriginalOffset[0][15]<<24);
+ TxAGC[RF_PATH_B] += tmpval;
+ }
+ }
+ }
+ for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
+ ptr = (u8 *)(&(TxAGC[idx1]));
+ for (idx2 = 0; idx2 < 4; idx2++) {
+ if (*ptr > RF6052_MAX_TX_PWR)
+ *ptr = RF6052_MAX_TX_PWR;
+ ptr++;
+ }
+ }
+ ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 1, &direction, &pwrtrac_value);
+
+ if (direction == 1) {
+ /* Increase TX pwoer */
+ TxAGC[0] += pwrtrac_value;
+ TxAGC[1] += pwrtrac_value;
+ } else if (direction == 2) {
+ /* Decrease TX pwoer */
+ TxAGC[0] -= pwrtrac_value;
+ TxAGC[1] -= pwrtrac_value;
+ }
+
+ /* rf-A cck tx power */
+ tmpval = TxAGC[RF_PATH_A]&0xff;
+ PHY_SetBBReg(Adapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval);
+ tmpval = TxAGC[RF_PATH_A]>>8;
+ PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+ /* rf-B cck tx power */
+ tmpval = TxAGC[RF_PATH_B]>>24;
+ PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval);
+ tmpval = TxAGC[RF_PATH_B]&0x00ffffff;
+ PHY_SetBBReg(Adapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
+} /* PHY_RF6052SetCckTxPower */
+
+/* */
+/* powerbase0 for OFDM rates */
+/* powerbase1 for HT MCS rates */
+/* */
+static void getpowerbase88e(struct adapter *Adapter, u8 *pPowerLevelOFDM,
+ u8 *pPowerLevelBW20, u8 *pPowerLevelBW40, u8 Channel, u32 *OfdmBase, u32 *MCSBase)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u32 powerBase0, powerBase1;
+ u8 i, powerlevel[2];
+
+ for (i = 0; i < 2; i++) {
+ powerBase0 = pPowerLevelOFDM[i];
+
+ powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0;
+ *(OfdmBase+i) = powerBase0;
+ }
+ for (i = 0; i < pHalData->NumTotalRFPath; i++) {
+ /* Check HT20 to HT40 diff */
+ if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+ powerlevel[i] = pPowerLevelBW20[i];
+ else
+ powerlevel[i] = pPowerLevelBW40[i];
+ powerBase1 = powerlevel[i];
+ powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1;
+ *(MCSBase+i) = powerBase1;
+ }
+}
+static void get_rx_power_val_by_reg(struct adapter *Adapter, u8 Channel,
+ u8 index, u32 *powerBase0, u32 *powerBase1,
+ u32 *pOutWriteVal)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ struct dm_priv *pdmpriv = &pHalData->dmpriv;
+ u8 i, chnlGroup = 0, pwr_diff_limit[4], customer_pwr_limit;
+ s8 pwr_diff = 0;
+ u32 writeVal, customer_limit, rf;
+ u8 Regulatory = pHalData->EEPROMRegulatory;
+
+ /* Index 0 & 1= legacy OFDM, 2-5=HT_MCS rate */
+
+ for (rf = 0; rf < 2; rf++) {
+ switch (Regulatory) {
+ case 0: /* Realtek better performance */
+ /* increase power diff defined by Realtek for large power */
+ chnlGroup = 0;
+ writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+ break;
+ case 1: /* Realtek regulatory */
+ /* increase power diff defined by Realtek for regulatory */
+ if (pHalData->pwrGroupCnt == 1)
+ chnlGroup = 0;
+ if (pHalData->pwrGroupCnt >= pHalData->PGMaxGroup) {
+ if (Channel < 3) /* Chanel 1-2 */
+ chnlGroup = 0;
+ else if (Channel < 6) /* Channel 3-5 */
+ chnlGroup = 1;
+ else if (Channel < 9) /* Channel 6-8 */
+ chnlGroup = 2;
+ else if (Channel < 12) /* Channel 9-11 */
+ chnlGroup = 3;
+ else if (Channel < 14) /* Channel 12-13 */
+ chnlGroup = 4;
+ else if (Channel == 14) /* Channel 14 */
+ chnlGroup = 5;
+ }
+ writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+ break;
+ case 2: /* Better regulatory */
+ /* don't increase any power diff */
+ writeVal = ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+ break;
+ case 3: /* Customer defined power diff. */
+ /* increase power diff defined by customer. */
+ chnlGroup = 0;
+
+ if (index < 2)
+ pwr_diff = pHalData->TxPwrLegacyHtDiff[rf][Channel-1];
+ else if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
+ pwr_diff = pHalData->TxPwrHt20Diff[rf][Channel-1];
+
+ if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_40)
+ customer_pwr_limit = pHalData->PwrGroupHT40[rf][Channel-1];
+ else
+ customer_pwr_limit = pHalData->PwrGroupHT20[rf][Channel-1];
+
+ if (pwr_diff >= customer_pwr_limit)
+ pwr_diff = 0;
+ else
+ pwr_diff = customer_pwr_limit - pwr_diff;
+
+ for (i = 0; i < 4; i++) {
+ pwr_diff_limit[i] = (u8)((pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)]&(0x7f<<(i*8)))>>(i*8));
+
+ if (pwr_diff_limit[i] > pwr_diff)
+ pwr_diff_limit[i] = pwr_diff;
+ }
+ customer_limit = (pwr_diff_limit[3]<<24) | (pwr_diff_limit[2]<<16) |
+ (pwr_diff_limit[1]<<8) | (pwr_diff_limit[0]);
+ writeVal = customer_limit + ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+ break;
+ default:
+ chnlGroup = 0;
+ writeVal = pHalData->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+ break;
+ }
+/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
+/* Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
+/* In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+ /* 92d do not need this */
+ if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
+ writeVal = 0x14141414;
+ else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
+ writeVal = 0x00000000;
+
+ /* 20100628 Joseph: High power mode for BT-Coexist mechanism. */
+ /* This mechanism is only applied when Driver-Highpower-Mechanism is OFF. */
+ if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT1)
+ writeVal = writeVal - 0x06060606;
+ else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_BT2)
+ writeVal = writeVal;
+ *(pOutWriteVal+rf) = writeVal;
+ }
+}
+static void writeOFDMPowerReg88E(struct adapter *Adapter, u8 index, u32 *pValue)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u16 regoffset_a[6] = {
+ rTxAGC_A_Rate18_06, rTxAGC_A_Rate54_24,
+ rTxAGC_A_Mcs03_Mcs00, rTxAGC_A_Mcs07_Mcs04,
+ rTxAGC_A_Mcs11_Mcs08, rTxAGC_A_Mcs15_Mcs12};
+ u16 regoffset_b[6] = {
+ rTxAGC_B_Rate18_06, rTxAGC_B_Rate54_24,
+ rTxAGC_B_Mcs03_Mcs00, rTxAGC_B_Mcs07_Mcs04,
+ rTxAGC_B_Mcs11_Mcs08, rTxAGC_B_Mcs15_Mcs12};
+ u8 i, rf, pwr_val[4];
+ u32 writeVal;
+ u16 regoffset;
+
+ for (rf = 0; rf < 2; rf++) {
+ writeVal = pValue[rf];
+ for (i = 0; i < 4; i++) {
+ pwr_val[i] = (u8)((writeVal & (0x7f<<(i*8)))>>(i*8));
+ if (pwr_val[i] > RF6052_MAX_TX_PWR)
+ pwr_val[i] = RF6052_MAX_TX_PWR;
+ }
+ writeVal = (pwr_val[3]<<24) | (pwr_val[2]<<16) | (pwr_val[1]<<8) | pwr_val[0];
+
+ if (rf == 0)
+ regoffset = regoffset_a[index];
+ else
+ regoffset = regoffset_b[index];
+
+ PHY_SetBBReg(Adapter, regoffset, bMaskDWord, writeVal);
+
+ /* 201005115 Joseph: Set Tx Power diff for Tx power training mechanism. */
+ if (((pHalData->rf_type == RF_2T2R) &&
+ (regoffset == rTxAGC_A_Mcs15_Mcs12 || regoffset == rTxAGC_B_Mcs15_Mcs12)) ||
+ ((pHalData->rf_type != RF_2T2R) &&
+ (regoffset == rTxAGC_A_Mcs07_Mcs04 || regoffset == rTxAGC_B_Mcs07_Mcs04))) {
+ writeVal = pwr_val[3];
+ if (regoffset == rTxAGC_A_Mcs15_Mcs12 || regoffset == rTxAGC_A_Mcs07_Mcs04)
+ regoffset = 0xc90;
+ if (regoffset == rTxAGC_B_Mcs15_Mcs12 || regoffset == rTxAGC_B_Mcs07_Mcs04)
+ regoffset = 0xc98;
+ for (i = 0; i < 3; i++) {
+ if (i != 2)
+ writeVal = (writeVal > 8) ? (writeVal-8) : 0;
+ else
+ writeVal = (writeVal > 6) ? (writeVal-6) : 0;
+ rtw_write8(Adapter, (u32)(regoffset+i), (u8)writeVal);
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------------
+ * Function: PHY_RF6052SetOFDMTxPower
+ *
+ * Overview: For legacy and HY OFDM, we must read EEPROM TX power index for
+ * different channel and read original value in TX power register area from
+ * 0xe00. We increase offset and original value to be correct tx pwr.
+ *
+ * Input: NONE
+ *
+ * Output: NONE
+ *
+ * Return: NONE
+ *
+ * Revised History:
+ * When Who Remark
+ * 11/05/2008 MHC Simulate 8192 series method.
+ * 01/06/2009 MHC 1. Prevent Path B tx power overflow or underflow dure to
+ * A/B pwr difference or legacy/HT pwr diff.
+ * 2. We concern with path B legacy/HT OFDM difference.
+ * 01/22/2009 MHC Support new EPRO format from SD3.
+ *
+ *---------------------------------------------------------------------------*/
+
+void
+rtl8188e_PHY_RF6052SetOFDMTxPower(
+ struct adapter *Adapter,
+ u8 *pPowerLevelOFDM,
+ u8 *pPowerLevelBW20,
+ u8 *pPowerLevelBW40,
+ u8 Channel)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u32 writeVal[2], powerBase0[2], powerBase1[2], pwrtrac_value;
+ u8 direction;
+ u8 index = 0;
+
+ getpowerbase88e(Adapter, pPowerLevelOFDM, pPowerLevelBW20, pPowerLevelBW40, Channel, &powerBase0[0], &powerBase1[0]);
+
+ /* 2012/04/23 MH According to power tracking value, we need to revise OFDM tx power. */
+ /* This is ued to fix unstable power tracking mode. */
+ ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 0, &direction, &pwrtrac_value);
+
+ for (index = 0; index < 6; index++) {
+ get_rx_power_val_by_reg(Adapter, Channel, index,
+ &powerBase0[0], &powerBase1[0],
+ &writeVal[0]);
+
+ if (direction == 1) {
+ writeVal[0] += pwrtrac_value;
+ writeVal[1] += pwrtrac_value;
+ } else if (direction == 2) {
+ writeVal[0] -= pwrtrac_value;
+ writeVal[1] -= pwrtrac_value;
+ }
+ writeOFDMPowerReg88E(Adapter, index, &writeVal[0]);
+ }
+}
+
+static int phy_RF6052_Config_ParaFile(struct adapter *Adapter)
+{
+ struct bb_reg_def *pPhyReg;
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ u32 u4RegValue = 0;
+ u8 eRFPath;
+ int rtStatus = _SUCCESS;
+
+ /* 3----------------------------------------------------------------- */
+ /* 3 <2> Initialize RF */
+ /* 3----------------------------------------------------------------- */
+ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) {
+ pPhyReg = &pHalData->PHYRegDef[eRFPath];
+
+ /*----Store original RFENV control type----*/
+ switch (eRFPath) {
+ case RF_PATH_A:
+ case RF_PATH_C:
+ u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV);
+ break;
+ case RF_PATH_B:
+ case RF_PATH_D:
+ u4RegValue = PHY_QueryBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+ break;
+ }
+ /*----Set RF_ENV enable----*/
+ PHY_SetBBReg(Adapter, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+ rtw_udelay_os(1);/* PlatformStallExecution(1); */
+
+ /*----Set RF_ENV output high----*/
+ PHY_SetBBReg(Adapter, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
+ rtw_udelay_os(1);/* PlatformStallExecution(1); */
+
+ /* Set bit number of Address and Data for RF register */
+ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 1 to 4 bits for 8255 */
+ rtw_udelay_os(1);/* PlatformStallExecution(1); */
+
+ PHY_SetBBReg(Adapter, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for 8255 */
+ rtw_udelay_os(1);/* PlatformStallExecution(1); */
+
+ /*----Initialize RF fom connfiguration file----*/
+ switch (eRFPath) {
+ case RF_PATH_A:
+ if (HAL_STATUS_FAILURE == ODM_ConfigRFWithHeaderFile(&pHalData->odmpriv, (enum ODM_RF_RADIO_PATH)eRFPath, (enum ODM_RF_RADIO_PATH)eRFPath))
+ rtStatus = _FAIL;
+ break;
+ case RF_PATH_B:
+ if (HAL_STATUS_FAILURE == ODM_ConfigRFWithHeaderFile(&pHalData->odmpriv, (enum ODM_RF_RADIO_PATH)eRFPath, (enum ODM_RF_RADIO_PATH)eRFPath))
+ rtStatus = _FAIL;
+ break;
+ case RF_PATH_C:
+ break;
+ case RF_PATH_D:
+ break;
+ }
+ /*----Restore RFENV control type----*/;
+ switch (eRFPath) {
+ case RF_PATH_A:
+ case RF_PATH_C:
+ PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+ break;
+ case RF_PATH_B:
+ case RF_PATH_D:
+ PHY_SetBBReg(Adapter, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+ break;
+ }
+ if (rtStatus != _SUCCESS)
+ goto phy_RF6052_Config_ParaFile_Fail;
+ }
+ return rtStatus;
+
+phy_RF6052_Config_ParaFile_Fail:
+ return rtStatus;
+}
+
+int PHY_RF6052_Config8188E(struct adapter *Adapter)
+{
+ struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
+ int rtStatus = _SUCCESS;
+
+ /* */
+ /* Initialize general global value */
+ /* */
+ /* TODO: Extend RF_PATH_C and RF_PATH_D in the future */
+ if (pHalData->rf_type == RF_1T1R)
+ pHalData->NumTotalRFPath = 1;
+ else
+ pHalData->NumTotalRFPath = 2;
+
+ /* */
+ /* Config BB and RF */
+ /* */
+ rtStatus = phy_RF6052_Config_ParaFile(Adapter);
+ return rtStatus;
+}
projects / linux-beck.git / commitdiff