ASoC: imx-spdif: Add indentation for binding doc to increase readability

This patch simply adds indentations for DT binding doc to increase readability
without changing any contents.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
index 7d13479f9c3c989f42a3e3b6df6ae0753b8190d4..da84a442ccea52d9d276fa8a50cefbbc4acfe0cd 100644 (file)
--- a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
@@ -2,23 +2,25 @@ Freescale i.MX audio complex with S/PDIF transceiver
 
 Required properties:
 
-  - compatible : "fsl,imx-audio-spdif"
+  - compatible         : "fsl,imx-audio-spdif"
 
-  - model : The user-visible name of this sound complex
+  - model              : The user-visible name of this sound complex
 
-  - spdif-controller : The phandle of the i.MX S/PDIF controller
+  - spdif-controller   : The phandle of the i.MX S/PDIF controller
 
 
 Optional properties:
 
-  - spdif-out : This is a boolean property. If present, the transmitting
-    function of S/PDIF will be enabled, indicating there's a physical
-    S/PDIF out connector/jack on the board or it's connecting to some
-    other IP block, such as an HDMI encoder/display-controller.
+  - spdif-out          : This is a boolean property. If present, the
+                         transmitting function of S/PDIF will be enabled,
+                         indicating there's a physical S/PDIF out connector
+                         or jack on the board or it's connecting to some
+                         other IP block, such as an HDMI encoder or
+                         display-controller.
 
-  - spdif-in : This is a boolean property. If present, the receiving
-    function of S/PDIF will be enabled, indicating there's a physical
-    S/PDIF in connector/jack on the board.
+  - spdif-in           : This is a boolean property. If present, the receiving
+                         function of S/PDIF will be enabled, indicating there
+                         is a physical S/PDIF in connector/jack on the board.
 
 * Note: At least one of these two properties should be set in the DT binding.