{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */
{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */
{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
- { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
- { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
- { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
- { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
- { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
- { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */
{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
-static unsigned int sleep_usb[2];
static unsigned int sleep_sys_clocks[5];
static unsigned int sleep_sys_pinfunc;
static unsigned int sleep_static_memctlr[4][3];
static void save_core_regs(void)
{
-#ifndef CONFIG_SOC_AU1200
- /* Shutdown USB host/device. */
- sleep_usb[0] = au_readl(USB_HOST_CONFIG);
-
- /* There appears to be some undocumented reset register.... */
- au_writel(0, 0xb0100004);
- au_sync();
- au_writel(0, USB_HOST_CONFIG);
- au_sync();
-
- sleep_usb[1] = au_readl(USBD_ENABLE);
- au_writel(0, USBD_ENABLE);
- au_sync();
-
-#else /* AU1200 */
-
- /* enable access to OTG mmio so we can save OTG CAP/MUX.
- * FIXME: write an OTG driver and move this stuff there!
- */
- au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
- au_sync();
- sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */
- sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */
-#endif
-
/* Clocks and PLLs. */
sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
au_sync();
-#ifndef CONFIG_SOC_AU1200
- au_writel(sleep_usb[0], USB_HOST_CONFIG);
- au_writel(sleep_usb[1], USBD_ENABLE);
- au_sync();
-#else
- /* enable access to OTG memory */
- au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
- au_sync();
-
- /* restore OTG caps and port mux. */
- au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */
- au_sync();
- au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */
- au_sync();
-#endif
-
/* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
void alchemy_sleep_au1550(void);
void au_sleep(void);
+/* USB: drivers/usb/host/alchemy-common.c */
+enum alchemy_usb_block {
+ ALCHEMY_USB_OHCI0,
+ ALCHEMY_USB_UDC0,
+ ALCHEMY_USB_EHCI0,
+ ALCHEMY_USB_OTG0,
+};
+int alchemy_usb_control(int block, int enable);
+
/* SOC Interrupt numbers */
*/
#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
-#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */
+#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */
#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
+#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */
#ifdef CONFIG_SOC_AU1000
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
#define IRDA_PHYS_ADDR 0x10300000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#ifdef CONFIG_SOC_AU1500
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
#define PCI_PHYS_ADDR 0x14005000
#define PCI_MEM_PHYS_ADDR 0x400000000ULL
#define PCI_IO_PHYS_ADDR 0x500000000ULL
#ifdef CONFIG_SOC_AU1100
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
#define IRDA_PHYS_ADDR 0x10300000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#ifdef CONFIG_SOC_AU1550
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x14020000
#define PCI_PHYS_ADDR 0x14005000
#define PE_PHYS_ADDR 0x14008000
#define PSC0_PHYS_ADDR 0x11A00000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define AES_PHYS_ADDR 0x10300000
#define CIM_PHYS_ADDR 0x14004000
-#define USBM_PHYS_ADDR 0x14020000
-#define USBH_PHYS_ADDR 0x14020100
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
#define LCD_PHYS_ADDR 0x15000000
#define USB_EHCI_LEN 0x100
#define USB_UDC_BASE 0x14022000
#define USB_UDC_LEN 0x2000
-#define USB_MSR_BASE 0xB4020000
-#define USB_MSR_MCFG 4
-#define USBMSRMCFG_OMEMEN 0
-#define USBMSRMCFG_OBMEN 1
-#define USBMSRMCFG_EMEMEN 2
-#define USBMSRMCFG_EBMEN 3
-#define USBMSRMCFG_DMEMEN 4
-#define USBMSRMCFG_DBMEN 5
-#define USBMSRMCFG_GMEMEN 6
-#define USBMSRMCFG_OHCCLKEN 16
-#define USBMSRMCFG_EHCCLKEN 17
-#define USBMSRMCFG_UDCCLKEN 18
-#define USBMSRMCFG_PHYPLLEN 19
-#define USBMSRMCFG_RDCOMB 30
-#define USBMSRMCFG_PFEN 31
#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
#define USB_OHCI_LEN 0x00100000
#endif
-#ifndef CONFIG_SOC_AU1200
-
-/* USB Device Controller */
-#define USBD_EP0RD 0xB0200000
-#define USBD_EP0WR 0xB0200004
-#define USBD_EP2WR 0xB0200008
-#define USBD_EP3WR 0xB020000C
-#define USBD_EP4RD 0xB0200010
-#define USBD_EP5RD 0xB0200014
-#define USBD_INTEN 0xB0200018
-#define USBD_INTSTAT 0xB020001C
-# define USBDEV_INT_SOF (1 << 12)
-# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
-# define USBDEV_INT_CMPLT_BIT 0
-# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG 0xB0200020
-#define USBD_EP0CS 0xB0200024
-#define USBD_EP2CS 0xB0200028
-#define USBD_EP3CS 0xB020002C
-#define USBD_EP4CS 0xB0200030
-#define USBD_EP5CS 0xB0200034
-# define USBDEV_CS_SU (1 << 14)
-# define USBDEV_CS_NAK (1 << 13)
-# define USBDEV_CS_ACK (1 << 12)
-# define USBDEV_CS_BUSY (1 << 11)
-# define USBDEV_CS_TSIZE_BIT 1
-# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
-# define USBDEV_CS_STALL (1 << 0)
-#define USBD_EP0RDSTAT 0xB0200040
-#define USBD_EP0WRSTAT 0xB0200044
-#define USBD_EP2WRSTAT 0xB0200048
-#define USBD_EP3WRSTAT 0xB020004C
-#define USBD_EP4RDSTAT 0xB0200050
-#define USBD_EP5RDSTAT 0xB0200054
-# define USBDEV_FSTAT_FLUSH (1 << 6)
-# define USBDEV_FSTAT_UF (1 << 5)
-# define USBDEV_FSTAT_OF (1 << 4)
-# define USBDEV_FSTAT_FCNT_BIT 0
-# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE 0xB0200058
-# define USBDEV_ENABLE (1 << 1)
-# define USBDEV_CE (1 << 0)
-
-#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
--- /dev/null
+/*
+ * USB block power/access management abstraction.
+ *
+ * Au1000+: The OHCI block control register is at the far end of the OHCI memory
+ * area. Au1550 has OHCI on different base address. No need to handle
+ * UDC here.
+ * Au1200: one register to control access and clocks to O/EHCI, UDC and OTG
+ * as well as the PHY for EHCI and UDC.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* control register offsets */
+#define AU1000_OHCICFG 0x7fffc
+#define AU1550_OHCICFG 0x07ffc
+#define AU1200_USBCFG 0x04
+
+/* Au1000 USB block config bits */
+#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */
+#define USBHEN_CE (1 << 3) /* OHCI block clock enable */
+#define USBHEN_E (1 << 2) /* OHCI block enable */
+#define USBHEN_C (1 << 1) /* OHCI block coherency bit */
+#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */
+
+/* Au1200 USB config bits */
+#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */
+#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */
+#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */
+#define USBCFG_SSD (1 << 23) /* serial short detect en */
+#define USBCFG_PPE (1 << 19) /* HS PHY PLL */
+#define USBCFG_UCE (1 << 18) /* UDC clock enable */
+#define USBCFG_ECE (1 << 17) /* EHCI clock enable */
+#define USBCFG_OCE (1 << 16) /* OHCI clock enable */
+#define USBCFG_FLA(x) (((x) & 0x3f) << 8)
+#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */
+#define USBCFG_GME (1 << 6) /* OTG mem access */
+#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */
+#define USBCFG_DME (1 << 4) /* UDC mem enable */
+#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */
+#define USBCFG_EME (1 << 2) /* EHCI mem enable */
+#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */
+#define USBCFG_OME (1 << 0) /* OHCI mem enable */
+#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
+ USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
+ USBCFG_GME | USBCFG_DBE | USBCFG_DME | \
+ USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \
+ USBCFG_OME)
+
+
+static DEFINE_SPINLOCK(alchemy_usb_lock);
+
+
+static inline void __au1200_ohci_control(void __iomem *base, int enable)
+{
+ unsigned long r = __raw_readl(base + AU1200_USBCFG);
+ if (enable) {
+ __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
+ wmb();
+ udelay(2000);
+ } else {
+ __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+ }
+}
+
+static inline void __au1200_ehci_control(void __iomem *base, int enable)
+{
+ unsigned long r = __raw_readl(base + AU1200_USBCFG);
+ if (enable) {
+ __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+ } else {
+ if (!(r & USBCFG_UCE)) /* UDC also off? */
+ r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
+ __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+ }
+}
+
+static inline void __au1200_udc_control(void __iomem *base, int enable)
+{
+ unsigned long r = __raw_readl(base + AU1200_USBCFG);
+ if (enable) {
+ __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
+ wmb();
+ } else {
+ if (!(r & USBCFG_ECE)) /* EHCI also off? */
+ r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
+ __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
+ wmb();
+ }
+}
+
+static inline int au1200_coherency_bug(void)
+{
+#if defined(CONFIG_DMA_COHERENT)
+ /* Au1200 AB USB does not support coherent memory */
+ if (!(read_c0_prid() & 0xff)) {
+ printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
+ printk(KERN_INFO "Au1200 USB: update your board or re-configure"
+ " the kernel\n");
+ return -ENODEV;
+ }
+#endif
+ return 0;
+}
+
+static inline int au1200_usb_control(int block, int enable)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+ int ret = 0;
+
+ switch (block) {
+ case ALCHEMY_USB_OHCI0:
+ ret = au1200_coherency_bug();
+ if (ret && enable)
+ goto out;
+ __au1200_ohci_control(base, enable);
+ break;
+ case ALCHEMY_USB_UDC0:
+ __au1200_udc_control(base, enable);
+ break;
+ case ALCHEMY_USB_EHCI0:
+ ret = au1200_coherency_bug();
+ if (ret && enable)
+ goto out;
+ __au1200_ehci_control(base, enable);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+out:
+ return ret;
+}
+
+
+/* initialize USB block(s) to a known working state */
+static inline void au1200_usb_init(void)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+ __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+}
+
+static inline void au1000_usb_init(unsigned long rb, int reg)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
+ unsigned long r = __raw_readl(base);
+
+#if defined(__BIG_ENDIAN)
+ r |= USBHEN_BE;
+#endif
+ r |= USBHEN_C;
+
+ __raw_writel(r, base);
+ wmb();
+ udelay(1000);
+}
+
+
+static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
+ unsigned long r = __raw_readl(base + creg);
+
+ if (enable) {
+ __raw_writel(r | USBHEN_CE, base + creg);
+ wmb();
+ udelay(1000);
+ __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
+ wmb();
+ udelay(1000);
+
+ /* wait for reset complete (read reg twice: au1500 erratum) */
+ while (__raw_readl(base + creg),
+ !(__raw_readl(base + creg) & USBHEN_RD))
+ udelay(1000);
+ } else {
+ __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
+ wmb();
+ }
+}
+
+static inline int au1000_usb_control(int block, int enable, unsigned long rb,
+ int creg)
+{
+ int ret = 0;
+
+ switch (block) {
+ case ALCHEMY_USB_OHCI0:
+ __au1xx0_ohci_control(enable, rb, creg);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+ return ret;
+}
+
+/*
+ * alchemy_usb_control - control Alchemy on-chip USB blocks
+ * @block: USB block to target
+ * @enable: set 1 to enable a block, 0 to disable
+ */
+int alchemy_usb_control(int block, int enable)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&alchemy_usb_lock, flags);
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ ret = au1000_usb_control(block, enable,
+ AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ ret = au1000_usb_control(block, enable,
+ AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ ret = au1200_usb_control(block, enable);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+ spin_unlock_irqrestore(&alchemy_usb_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(alchemy_usb_control);
+
+
+static unsigned long alchemy_usb_pmdata[2];
+
+static void au1000_usb_pm(unsigned long br, int creg, int susp)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(br);
+
+ if (susp) {
+ alchemy_usb_pmdata[0] = __raw_readl(base + creg);
+ /* There appears to be some undocumented reset register.... */
+ __raw_writel(0, base + 0x04);
+ wmb();
+ __raw_writel(0, base + creg);
+ wmb();
+ } else {
+ __raw_writel(alchemy_usb_pmdata[0], base + creg);
+ wmb();
+ }
+}
+
+static void au1200_usb_pm(int susp)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
+ if (susp) {
+ /* save OTG_CAP/MUX registers which indicate port routing */
+ /* FIXME: write an OTG driver to do that */
+ alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
+ alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
+ } else {
+ /* restore access to all MMIO areas */
+ au1200_usb_init();
+
+ /* restore OTG_CAP/MUX registers */
+ __raw_writel(alchemy_usb_pmdata[0], base + 0x00);
+ __raw_writel(alchemy_usb_pmdata[1], base + 0x04);
+ wmb();
+ }
+}
+
+static void alchemy_usb_pm(int susp)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ au1200_usb_pm(susp);
+ break;
+ }
+}
+
+static int alchemy_usb_suspend(void)
+{
+ alchemy_usb_pm(1);
+ return 0;
+}
+
+static void alchemy_usb_resume(void)
+{
+ alchemy_usb_pm(0);
+}
+
+static struct syscore_ops alchemy_usb_pm_ops = {
+ .suspend = alchemy_usb_suspend,
+ .resume = alchemy_usb_resume,
+};
+
+static int __init alchemy_usb_init(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ au1200_usb_init();
+ break;
+ }
+
+ register_syscore_ops(&alchemy_usb_pm_ops);
+
+ return 0;
+}
+arch_initcall(alchemy_usb_init);
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
-#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN (1<<31)
-#define USB_MCFG_RDCOMB (1<<30)
-#define USB_MCFG_SSDEN (1<<23)
-#define USB_MCFG_PHYPLLEN (1<<19)
-#define USB_MCFG_UCECLKEN (1<<18)
-#define USB_MCFG_EHCCLKEN (1<<17)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM (1<<7)
-#else
-#define USB_MCFG_UCAM (0)
-#endif
-#define USB_MCFG_EBMEN (1<<3)
-#define USB_MCFG_EMEMEN (1<<2)
-
-#define USBH_ENABLE_CE (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
-#define USBH_ENABLE_INIT (USB_MCFG_PFEN | USB_MCFG_RDCOMB | \
- USBH_ENABLE_CE | USB_MCFG_SSDEN | \
- USB_MCFG_UCAM | USB_MCFG_EBMEN | \
- USB_MCFG_EMEMEN)
-
-#define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
extern int usb_disabled(void);
-static void au1xxx_start_ehc(void)
-{
- /* enable clock to EHCI block and HS PHY PLL*/
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- /* enable EHCI mmio */
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-}
-
-static void au1xxx_stop_ehc(void)
-{
- unsigned long c;
-
- /* Disable mem */
- au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- /* Disable EHC clock. If the HS PHY is unused disable it too. */
- c = au_readl(USB_HOST_CONFIG) & ~USB_MCFG_EHCCLKEN;
- if (!(c & USB_MCFG_UCECLKEN)) /* UDC disabled? */
- c &= ~USB_MCFG_PHYPLLEN; /* yes: disable HS PHY PLL */
- au_writel(c, USB_HOST_CONFIG);
- au_sync();
-}
-
static int au1xxx_ehci_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
if (usb_disabled())
return -ENODEV;
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
- /* Au1200 AB USB does not support coherent memory */
- if (!(read_c0_prid() & 0xff)) {
- printk(KERN_INFO "%s: this is chip revision AB!\n", pdev->name);
- printk(KERN_INFO "%s: update your board or re-configure"
- " the kernel\n", pdev->name);
- return -ENODEV;
- }
-#endif
-
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
goto err2;
}
- au1xxx_start_ehc();
+ if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) {
+ printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+ ret = -ENODEV;
+ goto err3;
+ }
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
return ret;
}
- au1xxx_stop_ehc();
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+err3:
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- au1xxx_stop_ehc();
platform_set_drvdata(pdev, NULL);
return 0;
// could save FLADJ in case of Vaux power loss
// ... we'd only use it to handle clock skew
- au1xxx_stop_ehc();
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
return rc;
}
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- au1xxx_start_ehc();
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
// maybe restore FLADJ
#include <asm/mach-au1x00/au1000.h>
-#ifndef CONFIG_SOC_AU1200
-
-#define USBH_ENABLE_BE (1<<0)
-#define USBH_ENABLE_C (1<<1)
-#define USBH_ENABLE_E (1<<2)
-#define USBH_ENABLE_CE (1<<3)
-#define USBH_ENABLE_RD (1<<4)
-
-#ifdef __LITTLE_ENDIAN
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif defined(__BIG_ENDIAN)
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
- USBH_ENABLE_BE)
-#else
-#error not byte order defined
-#endif
-
-#else /* Au1200 */
-
-#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN (1<<31)
-#define USB_MCFG_RDCOMB (1<<30)
-#define USB_MCFG_SSDEN (1<<23)
-#define USB_MCFG_OHCCLKEN (1<<16)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM (1<<7)
-#else
-#define USB_MCFG_UCAM (0)
-#endif
-#define USB_MCFG_OBMEN (1<<1)
-#define USB_MCFG_OMEMEN (1<<0)
-
-#define USBH_ENABLE_CE USB_MCFG_OHCCLKEN
-
-#define USBH_ENABLE_INIT (USB_MCFG_PFEN | USB_MCFG_RDCOMB | \
- USBH_ENABLE_CE | USB_MCFG_SSDEN | \
- USB_MCFG_UCAM | \
- USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#define USBH_DISABLE (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#endif /* Au1200 */
extern int usb_disabled(void);
-static void au1xxx_start_ohc(void)
-{
- /* enable host controller */
-#ifndef CONFIG_SOC_AU1200
- au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- /* wait for reset complete (read register twice; see au1500 errata) */
- while (au_readl(USB_HOST_CONFIG),
- !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
- udelay(1000);
-
-#else /* Au1200 */
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
- au_sync();
- udelay(2000);
-#endif /* Au1200 */
-}
-
-static void au1xxx_stop_ohc(void)
-{
-#ifdef CONFIG_SOC_AU1200
- /* Disable mem */
- au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-#endif
- /* Disable clock */
- au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
-}
-
static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
if (usb_disabled())
return -ENODEV;
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
- /* Au1200 AB USB does not support coherent memory */
- if (!(read_c0_prid() & 0xff)) {
- printk(KERN_INFO "%s: this is chip revision AB !!\n",
- pdev->name);
- printk(KERN_INFO "%s: update your board or re-configure "
- "the kernel\n", pdev->name);
- return -ENODEV;
- }
-#endif
-
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ\n");
return -ENOMEM;
goto err2;
}
- au1xxx_start_ohc();
+ if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
+ printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+ ret = -ENODEV;
+ goto err3;
+ }
+
ohci_hcd_init(hcd_to_ohci(hcd));
ret = usb_add_hcd(hcd, pdev->resource[1].start,
return ret;
}
- au1xxx_stop_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+err3:
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
- au1xxx_stop_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- au1xxx_stop_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
bail:
spin_unlock_irqrestore(&ohci->lock, flags);
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
- au1xxx_start_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
ohci_finish_controller_resume(hcd);
projects / karo-tx-linux.git / commitdiff