# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
- ifeq ($(CONFIG_GPIOLIB),y)
- obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
- endif
+ obj-$(CONFIG_GPIOLIB) += gpiolib.o
endif
obj-$(CONFIG_PCI) += pci.o
/*
* Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- * GPIOLIB support for Au1000, Au1500, Au1100, Au1550 and Au12x0.
+ * GPIOLIB support for Alchemy chips.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Notes :
- * au1000 SoC have only one GPIO block : GPIO1
- * Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ * This file must ONLY be built when CONFIG_GPIOLIB=y and
+ * CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
+ * au1000 SoC have only one GPIO block : GPIO1
+ * Au1100, Au15x0, Au12x0 have a second one : GPIO2
*/
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/platform_device.h>
#include <linux/gpio.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
static int gpio2_get(struct gpio_chip *chip, unsigned offset)
{
},
};
-static int __init alchemy_gpiolib_init(void)
+static int __init alchemy_gpiochip_init(void)
{
- gpiochip_add(&alchemy_gpio_chip[0]);
- if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
- gpiochip_add(&alchemy_gpio_chip[1]);
-
- return 0;
+ int ret = 0;
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ ret = gpiochip_add(&alchemy_gpio_chip[0]);
+ break;
+ case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
+ ret = gpiochip_add(&alchemy_gpio_chip[0]);
+ ret |= gpiochip_add(&alchemy_gpio_chip[1]);
+ break;
+ }
+ return ret;
}
-arch_initcall(alchemy_gpiolib_init);
+arch_initcall(alchemy_gpiochip_init);
/**********************************************************************/
-/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once. On Au1550/Au1200 this
- * register enables use of GPIOs as wake source.
- */
-static inline void alchemy_gpio1_input_enable(void)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
- __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */
- wmb();
-}
-
/* GPIO2 shared interrupts and control */
static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
#ifndef CONFIG_GPIOLIB
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-#else /* CONFIG GPIOLIB */
-
-
- /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
-
-/* get everything through gpiolib */
-#define gpio_to_irq __gpio_to_irq
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define irq_to_gpio alchemy_irq_to_gpio
-
-#include <asm-generic/gpio.h>
-
-#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
+#endif /* CONFIG_ALCHEMY_GPIOINT_AU1000 */
#endif /* !CONFIG_GPIOLIB */
+/*
+ * Alchemy GPIO support.
+ *
+ * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
+ * the same kernel image.
+ * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
+ * appropriate CPU type (AU1000 currently).
+ */
+
#ifndef _ALCHEMY_GPIO_H_
#define _ALCHEMY_GPIO_H_
-#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000)
-
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio-au1000.h>
-#endif
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+ __raw_writel(0, base + 0x110); /* the write op is key */
+ wmb();
+}
+
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+* Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+* A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+* the boards' gpio.h must provide the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+* inlinable gpio functions are provided which enable access to the
+* Au1300 gpios only by using the numbers straight out of the data-
+* sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifdef CONFIG_GPIOLIB
+
+/* wraps the cpu-dependent irq_to_gpio functions */
+/* FIXME: gpiolib needs an irq_to_gpio hook */
+static inline int __au_irq_to_gpio(unsigned int irq)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+ return alchemy_irq_to_gpio(irq);
+ }
+ return -EINVAL;
+}
+
+
+/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
+
+/* get everything through gpiolib */
+#define gpio_to_irq __gpio_to_irq
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define irq_to_gpio __au_irq_to_gpio
+
+#include <asm-generic/gpio.h>
+
+#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+
+#endif /* CONFIG_GPIOLIB */
#endif /* _ALCHEMY_GPIO_H_ */
projects / karo-tx-linux.git / commitdiff