obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
+ .init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
- .init_time = r8a7790_timer_init,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
- .init_time = r8a7790_timer_init,
+ .init_time = rcar_gen2_timer_init,
.init_machine = lager_add_standard_devices,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
void __init r8a7790_clock_init(void)
{
- u32 mode = r8a7790_read_mode_pins();
+ u32 mode = rcar_gen2_read_mode_pins();
int k, ret = 0;
switch (mode & (MD(14) | MD(13))) {
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
+#include <mach/rcar-gen2.h>
+
void r8a7790_add_standard_devices(void);
void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_init_early(void);
-void r8a7790_timer_init(void);
extern struct smp_operations r8a7790_smp_ops;
-#define MD(nr) BIT(nr)
-u32 r8a7790_read_mode_pins(void);
-
#endif /* __ASM_R8A7790_H__ */
--- /dev/null
+#ifndef __ASM_RCAR_GEN2_H__
+#define __ASM_RCAR_GEN2_H__
+
+void rcar_gen2_timer_init(void);
+#define MD(nr) BIT(nr)
+u32 rcar_gen2_read_mode_pins(void);
+
+#endif /* __ASM_RCAR_GEN2_H__ */
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/clocksource.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
r8a7790_register_thermal();
}
-#define MODEMR 0xe6160060
-
-u32 __init r8a7790_read_mode_pins(void)
-{
- void __iomem *modemr = ioremap_nocache(MODEMR, 4);
- u32 mode;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
- return mode;
-}
-
-#define CNTCR 0
-#define CNTFID0 0x20
-
-void __init r8a7790_timer_init(void)
-{
-#ifdef CONFIG_ARM_ARCH_TIMER
- u32 mode = r8a7790_read_mode_pins();
- void __iomem *base;
- int extal_mhz = 0;
- u32 freq;
-
- /* At Linux boot time the r8a7790 arch timer comes up
- * with the counter disabled. Moreover, it may also report
- * a potentially incorrect fixed 13 MHz frequency. To be
- * correct these registers need to be updated to use the
- * frequency EXTAL / 2 which can be determined by the MD pins.
- */
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- extal_mhz = 15;
- break;
- case MD(13):
- extal_mhz = 20;
- break;
- case MD(14):
- extal_mhz = 26;
- break;
- case MD(13) | MD(14):
- extal_mhz = 30;
- break;
- }
-
- /* The arch timer frequency equals EXTAL / 2 */
- freq = extal_mhz * (1000000 / 2);
-
- /* Remap "armgcnt address map" space */
- base = ioremap(0xe6080000, PAGE_SIZE);
-
- /* Update registers with correct frequency */
- iowrite32(freq, base + CNTFID0);
- asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
-
- /* make sure arch timer is started by setting bit 0 of CNTCR */
- iowrite32(1, base + CNTCR);
- iounmap(base);
-#endif /* CONFIG_ARM_ARCH_TIMER */
-
- clocksource_of_init();
-}
-
void __init r8a7790_init_early(void)
{
#ifndef CONFIG_ARM_ARCH_TIMER
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = r8a7790_init_early,
- .init_time = r8a7790_timer_init,
+ .init_time = rcar_gen2_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
--- /dev/null
+/*
+ * R-Car Generation 2 support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/common.h>
+#include <mach/rcar-gen2.h>
+#include <asm/mach/arch.h>
+
+#define MODEMR 0xe6160060
+
+u32 __init rcar_gen2_read_mode_pins(void)
+{
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+ u32 mode;
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+
+ return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
+void __init rcar_gen2_timer_init(void)
+{
+#ifdef CONFIG_ARM_ARCH_TIMER
+ u32 mode = rcar_gen2_read_mode_pins();
+ void __iomem *base;
+ int extal_mhz = 0;
+ u32 freq;
+
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
+
+ /* Remap "armgcnt address map" space */
+ base = ioremap(0xe6080000, PAGE_SIZE);
+
+ /* Update registers with correct frequency */
+ iowrite32(freq, base + CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* make sure arch timer is started by setting bit 0 of CNTCR */
+ iowrite32(1, base + CNTCR);
+ iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
+
+ clocksource_of_init();
+}
projects / linux-beck.git / commitdiff