I2C: OMAP: Prevent the register access after pm_runtime_put in probe

Currently in probe
pm_runtime_put(dev->dev);

...
        /* i2c device drivers may be active on return from add_adapter() */
        adap->nr = pdev->id;
        r = i2c_add_numbered_adapter(adap);
        if (r) {
                dev_err(dev->dev, "failure adding adapter\n");
                goto err_free_irq;
        }
...

return 0;

err_free_irq:
        free_irq(dev->irq, dev);
err_unuse_clocks:
        omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
        pm_runtime_put(dev->dev);

This may access the i2c registers without the clocks in the error cases.
Fix the same by moving the pm_runtime_put after the error check.

Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index bf07ffd83c1e009fa2a7a5259fb72158fc4880cf..1777d799ee9ebfe807b183ca35e4cd7b8952faa3 100644 (file)
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1061,8 +1061,6 @@ omap_i2c_probe(struct platform_device *pdev)
        dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
                 dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
 
-       pm_runtime_put(dev->dev);
-
        adap = &dev->adapter;
        i2c_set_adapdata(adap, dev);
        adap->owner = THIS_MODULE;
@@ -1082,6 +1080,8 @@ omap_i2c_probe(struct platform_device *pdev)
 
        of_i2c_register_devices(adap);
 
+       pm_runtime_put(dev->dev);
+
        return 0;
 
 err_free_irq: