regulator: tps65086: Fix DT node referencing in of_parse_cb

When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index 84e8cb109269b94e716cfe27ed8ffbcba2a4b706..45e96e15469005f376478d49dbc09045aae4bc3c 100644 (file)
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -162,14 +162,14 @@ static struct tps65086_regulator regulators[] = {
        TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
 };
 
-static int tps65086_of_parse_cb(struct device_node *dev,
+static int tps65086_of_parse_cb(struct device_node *node,
                                const struct regulator_desc *desc,
                                struct regulator_config *config)
 {
        int ret;
 
        /* Check for 25mV step mode */
-       if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
+       if (of_property_read_bool(node, "ti,regulator-step-size-25mv")) {
                switch (desc->id) {
                case BUCK1:
                case BUCK2:
@@ -193,7 +193,7 @@ static int tps65086_of_parse_cb(struct device_node *dev,
        }
 
        /* Check for decay mode */
-       if (desc->id <= BUCK6 && of_property_read_bool(config->of_node, "ti,regulator-decay")) {
+       if (desc->id <= BUCK6 && of_property_read_bool(node, "ti,regulator-decay")) {
                ret = regmap_write_bits(config->regmap,
                                        regulators[desc->id].decay_reg,
                                        regulators[desc->id].decay_mask,