]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ARM: dts: qcom: Add PM8941 functions device nodes
authorIvan T. Ivanov <ivan.ivanov@linaro.org>
Mon, 20 Apr 2015 07:45:36 +0000 (10:45 +0300)
committerKumar Gala <galak@codeaurora.org>
Mon, 27 Apr 2015 21:11:38 +0000 (16:11 -0500)
Add configuration nodes for following devices:

* GPIO block, with 36 pins
* MPP block, with 8 pins
* Current ADC (IADC)
* Volatage ADC (VADC), with multiple inputs
* Thermal sensor device, which is using on chip VADC
  channel report PMIC die temperature
* Power key device, which is responsible for clean system
  reboot or shutdown
* White LED device
* RTC device

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
arch/arm/boot/dts/qcom-pm8941.dtsi

index 24c5088acea2a244f79ae5b4edf537c07b8e22e3..aa774e685018a58d2fdebd408af6aed6e849a0f0 100644 (file)
@@ -1,3 +1,5 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
                reg = <0x0 SPMI_USID>;
                #address-cells = <1>;
                #size-cells = <0>;
+
+               rtc@6000 {
+                       compatible = "qcom,pm8941-rtc";
+                       reg = <0x6000 0x100>,
+                             <0x6100 0x100>;
+                       reg-names = "rtc", "alarm";
+                       interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+               };
+
+               pwrkey@800 {
+                       compatible = "qcom,pm8941-pwrkey";
+                       reg = <0x800 0x100>;
+                       interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                       debounce = <15625>;
+                       bias-pull-up;
+               };
+
+               pm8941_gpios: gpios@c000 {
+                       compatible = "qcom,pm8941-gpio";
+                       reg = <0xc000 0x2400>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+                                    <0 0xc1 0 IRQ_TYPE_NONE>,
+                                    <0 0xc2 0 IRQ_TYPE_NONE>,
+                                    <0 0xc3 0 IRQ_TYPE_NONE>,
+                                    <0 0xc4 0 IRQ_TYPE_NONE>,
+                                    <0 0xc5 0 IRQ_TYPE_NONE>,
+                                    <0 0xc6 0 IRQ_TYPE_NONE>,
+                                    <0 0xc7 0 IRQ_TYPE_NONE>,
+                                    <0 0xc8 0 IRQ_TYPE_NONE>,
+                                    <0 0xc9 0 IRQ_TYPE_NONE>,
+                                    <0 0xca 0 IRQ_TYPE_NONE>,
+                                    <0 0xcb 0 IRQ_TYPE_NONE>,
+                                    <0 0xcc 0 IRQ_TYPE_NONE>,
+                                    <0 0xcd 0 IRQ_TYPE_NONE>,
+                                    <0 0xce 0 IRQ_TYPE_NONE>,
+                                    <0 0xcf 0 IRQ_TYPE_NONE>,
+                                    <0 0xd0 0 IRQ_TYPE_NONE>,
+                                    <0 0xd1 0 IRQ_TYPE_NONE>,
+                                    <0 0xd2 0 IRQ_TYPE_NONE>,
+                                    <0 0xd3 0 IRQ_TYPE_NONE>,
+                                    <0 0xd4 0 IRQ_TYPE_NONE>,
+                                    <0 0xd5 0 IRQ_TYPE_NONE>,
+                                    <0 0xd6 0 IRQ_TYPE_NONE>,
+                                    <0 0xd7 0 IRQ_TYPE_NONE>,
+                                    <0 0xd8 0 IRQ_TYPE_NONE>,
+                                    <0 0xd9 0 IRQ_TYPE_NONE>,
+                                    <0 0xda 0 IRQ_TYPE_NONE>,
+                                    <0 0xdb 0 IRQ_TYPE_NONE>,
+                                    <0 0xdc 0 IRQ_TYPE_NONE>,
+                                    <0 0xdd 0 IRQ_TYPE_NONE>,
+                                    <0 0xde 0 IRQ_TYPE_NONE>,
+                                    <0 0xdf 0 IRQ_TYPE_NONE>,
+                                    <0 0xe0 0 IRQ_TYPE_NONE>,
+                                    <0 0xe1 0 IRQ_TYPE_NONE>,
+                                    <0 0xe2 0 IRQ_TYPE_NONE>,
+                                    <0 0xe3 0 IRQ_TYPE_NONE>;
+               };
+
+               pm8941_mpps: mpps@a000 {
+                       compatible = "qcom,pm8941-mpp";
+                       reg = <0xa000 0x800>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+                                    <0 0xa1 0 IRQ_TYPE_NONE>,
+                                    <0 0xa2 0 IRQ_TYPE_NONE>,
+                                    <0 0xa3 0 IRQ_TYPE_NONE>,
+                                    <0 0xa4 0 IRQ_TYPE_NONE>,
+                                    <0 0xa5 0 IRQ_TYPE_NONE>,
+                                    <0 0xa6 0 IRQ_TYPE_NONE>,
+                                    <0 0xa7 0 IRQ_TYPE_NONE>;
+               };
+
+               pm8941_temp: temp-alarm@2400 {
+                       compatible = "qcom,spmi-temp-alarm";
+                       reg = <0x2400 0x100>;
+                       interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+                       io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+                       io-channel-names = "thermal";
+                       #thermal-sensor-cells = <0>;
+               };
+
+               pm8941_vadc: vadc@3100 {
+                       compatible = "qcom,spmi-vadc";
+                       reg = <0x3100 0x100>;
+                       interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #io-channel-cells = <1>;
+
+                       die_temp {
+                               reg = <VADC_DIE_TEMP>;
+                       };
+                       ref_625mv {
+                               reg = <VADC_REF_625MV>;
+                       };
+                       ref_1250v {
+                               reg = <VADC_REF_1250MV>;
+                       };
+                       ref_gnd {
+                               reg = <VADC_GND_REF>;
+                       };
+                       ref_vdd {
+                               reg = <VADC_VDD_VADC>;
+                       };
+               };
+
+               pm8941_iadc: iadc@3600 {
+                       compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+                       reg = <0x3600 0x100>,
+                                 <0x12f1 0x1>;
+                       interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+                       qcom,external-resistor-micro-ohms = <10000>;
+               };
        };
 
        usid1: pm8941@1 {
-               compatible ="qcom,spmi-pmic";
+               compatible = "qcom,spmi-pmic";
                reg = <0x1 SPMI_USID>;
                #address-cells = <1>;
                #size-cells = <0>;
+
+               wled@d800 {
+                       compatible = "qcom,pm8941-wled";
+                       reg = <0xd800 0x100>;
+                       label = "backlight";
+
+                       qcom,cs-out;
+                       qcom,current-limit = <20>;
+                       qcom,current-boost-limit = <805>;
+                       qcom,switching-freq = <1600>;
+                       qcom,ovp = <29>;
+                       qcom,num-strings = <2>;
+               };
        };
 };