arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost

Adding fixed voltage regulators for Vbus and Vbus-boost required
by USB 3.0 DRD controller on Exynos7-espresso board.

Signed-off-by: Vivek Gautam <gautamvivek1987@gmail.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 25d9b4aa0ff652f754cfa7175fae938ecc138db7..e5892bb0ae6e55ccf5ba0cc7b30b7b616fea6413 100644 (file)
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -13,6 +13,7 @@
 #include "exynos7.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -32,6 +33,29 @@
                device_type = "memory";
                reg = <0x0 0x40000000 0x0 0xC0000000>;
        };
+
+       usb30_vbus_reg: regulator-usb30 {
+               compatible = "regulator-fixed";
+               regulator-name = "VBUS_5V";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb30_vbus_en>;
+               enable-active-high;
+       };
+
+       usb3drd_boost_5v: regulator-usb3drd-boost {
+               compatible = "regulator-fixed";
+               regulator-name = "VUSB_VBUS_5V";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb3drd_boost_en>;
+               enable-active-high;
+       };
+
 };
 
 &fin_pll {
@@ -365,3 +389,24 @@
        vqmmc-supply = <&ldo2_reg>;
        disable-wp;
 };
+
+&pinctrl_bus1 {
+       usb30_vbus_en: usb30-vbus-en {
+               samsung,pins = "gph1-1";
+               samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+               samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+               samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+       };
+
+       usb3drd_boost_en: usb3drd-boost-en {
+               samsung,pins = "gpf4-1";
+               samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+               samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+               samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+       };
+};
+
+&usbdrd_phy {
+       vbus-supply = <&usb30_vbus_reg>;
+       vbus-boost-supply = <&usb3drd_boost_5v>;
+};