denali_write32(8, denali->flash_reg + ECC_CORRECTION);
#endif
- if ((ioread32(denali->flash_reg + ECC_CORRECTION) &
- ECC_CORRECTION__VALUE) == 1) {
- denali->dev_info.wECCBytesPerSector = 4;
- denali->dev_info.wECCBytesPerSector *=
- denali->dev_info.wDevicesConnected;
- denali->dev_info.wNumPageSpareFlag =
- denali->dev_info.wPageSpareSize -
- denali->dev_info.wPageDataSize /
- (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
- denali->dev_info.wECCBytesPerSector
- - denali->dev_info.wSpareSkipBytes;
- } else {
- denali->dev_info.wECCBytesPerSector =
- (ioread32(denali->flash_reg + ECC_CORRECTION) &
- ECC_CORRECTION__VALUE) * 13 / 8;
- if ((denali->dev_info.wECCBytesPerSector) % 2 == 0)
- denali->dev_info.wECCBytesPerSector += 2;
- else
- denali->dev_info.wECCBytesPerSector += 1;
-
- denali->dev_info.wECCBytesPerSector *=
- denali->dev_info.wDevicesConnected;
- denali->dev_info.wNumPageSpareFlag =
- denali->dev_info.wPageSpareSize -
- denali->dev_info.wPageDataSize /
- (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
- denali->dev_info.wECCBytesPerSector
- - denali->dev_info.wSpareSkipBytes;
- }
}
/* queries the NAND device to see what ONFI modes it supports. */
static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
{
int i;
- uint16_t blks_lun_l, blks_lun_h, n_of_luns;
- uint32_t blockperlun, id;
denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
denali_write32(INTR_STATUS3__TIME_OUT,
denali->flash_reg + INTR_STATUS3);
- denali->dev_info.wONFIDevFeatures =
- ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES);
- denali->dev_info.wONFIOptCommands =
- ioread32(denali->flash_reg + ONFI_OPTIONAL_COMMANDS);
- denali->dev_info.wONFITimingMode =
- ioread32(denali->flash_reg + ONFI_TIMING_MODE);
- denali->dev_info.wONFIPgmCacheTimingMode =
- ioread32(denali->flash_reg + ONFI_PGM_CACHE_TIMING_MODE);
-
- n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
- ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
- blks_lun_l = ioread32(denali->flash_reg +
- ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
- blks_lun_h = ioread32(denali->flash_reg +
- ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
-
- blockperlun = (blks_lun_h << 16) | blks_lun_l;
-
- denali->dev_info.wTotalBlocks = n_of_luns * blockperlun;
-
if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
ONFI_TIMING_MODE__VALUE))
return FAIL;
nand_onfi_timing_set(denali, i);
- index_addr(denali, MODE_11 | 0, 0x90);
- index_addr(denali, MODE_11 | 1, 0);
-
- for (i = 0; i < 3; i++)
- index_addr_read_data(denali, MODE_11 | 2, &id);
-
- nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
-
- denali->dev_info.MLCDevice = id & 0x0C;
-
/* By now, all the ONFI devices we know support the page cache */
/* rw feature. So here we enable the pipeline_rw_ahead feature */
/* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */
static void get_samsung_nand_para(struct denali_nand_info *denali)
{
- uint8_t no_of_planes;
- uint32_t blk_size;
- uint64_t plane_size, capacity;
uint32_t id_bytes[5];
int i;
denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT);
denali_write32(2, denali->flash_reg + CS_SETUP_CNT);
}
-
- no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
- plane_size = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4);
- blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) &
- 0x30) >> 4);
- capacity = (uint64_t)128 * plane_size * no_of_planes;
-
- do_div(capacity, blk_size);
- denali->dev_info.wTotalBlocks = capacity;
}
static void get_toshiba_nand_para(struct denali_nand_info *denali)
#elif SUPPORT_8BITECC
denali_write32(8, denali->flash_reg + ECC_CORRECTION);
#endif
- denali->dev_info.MLCDevice = 1;
break;
default:
nand_dbg_print(NAND_DBG_WARN,
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
"Will use default parameter values instead.\n",
- denali->dev_info.wDeviceID);
+ device_id);
}
}
static void detect_partition_feature(struct denali_nand_info *denali)
{
+ /* For MRST platform, denali->fwblks represent the
+ * number of blocks firmware is taken,
+ * FW is in protect partition and MTD driver has no
+ * permission to access it. So let driver know how many
+ * blocks it can't touch.
+ * */
if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) &
PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
- denali->dev_info.wSpectraStartBlock =
+ denali->fwblks =
((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
MIN_MAX_BANK_1__MIN_VALUE) *
- denali->dev_info.wTotalBlocks)
+ denali->blksperchip)
+
(ioread32(denali->flash_reg + MIN_BLK_ADDR_1) &
MIN_BLK_ADDR_1__VALUE);
-
- denali->dev_info.wSpectraEndBlock =
- (((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
- MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
- denali->dev_info.wTotalBlocks)
- +
- (ioread32(denali->flash_reg + MAX_BLK_ADDR_1) &
- MAX_BLK_ADDR_1__VALUE);
-
- denali->dev_info.wTotalBlocks *=
- denali->total_used_banks;
-
- if (denali->dev_info.wSpectraEndBlock >=
- denali->dev_info.wTotalBlocks) {
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- }
-
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- } else {
- denali->dev_info.wTotalBlocks *=
- denali->total_used_banks;
- denali->dev_info.wSpectraStartBlock =
- SPECTRA_START_BLOCK;
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- }
- } else {
- denali->dev_info.wTotalBlocks *= denali->total_used_banks;
- denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
- denali->dev_info.wSpectraEndBlock =
- denali->dev_info.wTotalBlocks - 1;
- denali->dev_info.wDataBlockNum =
- denali->dev_info.wSpectraEndBlock -
- denali->dev_info.wSpectraStartBlock + 1;
- }
-}
-
-static void dump_device_info(struct denali_nand_info *denali)
-{
- nand_dbg_print(NAND_DBG_DEBUG, "denali->dev_info:\n");
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
- denali->dev_info.wDeviceMaker);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
- denali->dev_info.wDeviceID);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
- denali->dev_info.wDeviceType);
- nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
- denali->dev_info.wSpectraStartBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
- denali->dev_info.wSpectraEndBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
- denali->dev_info.wTotalBlocks);
- nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
- denali->dev_info.wPagesPerBlock);
- nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
- denali->dev_info.wPageSize);
- nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
- denali->dev_info.wPageDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
- denali->dev_info.wPageSpareSize);
- nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
- denali->dev_info.wNumPageSpareFlag);
- nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
- denali->dev_info.wECCBytesPerSector);
- nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
- denali->dev_info.wBlockSize);
- nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
- denali->dev_info.wBlockDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
- denali->dev_info.wDataBlockNum);
- nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
- denali->dev_info.bPlaneNum);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
- denali->dev_info.wDeviceMainAreaSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
- denali->dev_info.wDeviceSpareAreaSize);
- nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
- denali->dev_info.wDevicesConnected);
- nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
- denali->dev_info.wDeviceWidth);
- nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
- denali->dev_info.wHWRevision);
- nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
- denali->dev_info.wHWFeatures);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
- denali->dev_info.wONFIDevFeatures);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
- denali->dev_info.wONFIOptCommands);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
- denali->dev_info.wONFITimingMode);
- nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
- denali->dev_info.wONFIPgmCacheTimingMode);
- nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
- denali->dev_info.MLCDevice ? "Yes" : "No");
- nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
- denali->dev_info.wSpareSkipBytes);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
- denali->dev_info.nBitsInPageNumber);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
- denali->dev_info.nBitsInPageDataSize);
- nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
- denali->dev_info.nBitsInBlockDataSize);
+ } else
+ denali->fwblks = SPECTRA_START_BLOCK;
+ } else
+ denali->fwblks = SPECTRA_START_BLOCK;
}
static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint16_t status = PASS;
- uint8_t no_of_planes;
uint32_t id_bytes[5], addr;
uint8_t i, maf_id, device_id;
get_toshiba_nand_para(denali);
} else if (maf_id == 0xAD) { /* Hynix NAND */
get_hynix_nand_para(denali, device_id);
- } else {
- denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
}
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
ioread32(denali->flash_reg + CS_SETUP_CNT));
- denali->dev_info.wHWRevision = ioread32(denali->flash_reg + REVISION);
- denali->dev_info.wHWFeatures = ioread32(denali->flash_reg + FEATURES);
-
- denali->dev_info.wDeviceMainAreaSize =
- ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
- denali->dev_info.wDeviceSpareAreaSize =
- ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
-
- denali->dev_info.wPageDataSize =
- ioread32(denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
-
- /* Note: When using the Micon 4K NAND device, the controller will report
- * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
- * And if force set it to 218 bytes, the controller can not work
- * correctly. So just let it be. But keep in mind that this bug may
- * cause
- * other problems in future. - Yunpeng 2008-10-10
- */
- denali->dev_info.wPageSpareSize =
- ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
-
- denali->dev_info.wPagesPerBlock =
- ioread32(denali->flash_reg + PAGES_PER_BLOCK);
-
- denali->dev_info.wPageSize =
- denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize;
- denali->dev_info.wBlockSize =
- denali->dev_info.wPageSize * denali->dev_info.wPagesPerBlock;
- denali->dev_info.wBlockDataSize =
- denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize;
-
- denali->dev_info.wDeviceWidth =
- ioread32(denali->flash_reg + DEVICE_WIDTH);
- denali->dev_info.wDeviceType =
- ((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8);
-
- denali->dev_info.wDevicesConnected =
- ioread32(denali->flash_reg + DEVICES_CONNECTED);
-
- denali->dev_info.wSpareSkipBytes =
- ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) *
- denali->dev_info.wDevicesConnected;
-
- denali->dev_info.nBitsInPageNumber =
- ilog2(denali->dev_info.wPagesPerBlock);
- denali->dev_info.nBitsInPageDataSize =
- ilog2(denali->dev_info.wPageDataSize);
- denali->dev_info.nBitsInBlockDataSize =
- ilog2(denali->dev_info.wBlockDataSize);
-
set_ecc_config(denali);
- no_of_planes = ioread32(denali->flash_reg + NUMBER_OF_PLANES) &
- NUMBER_OF_PLANES__VALUE;
-
- switch (no_of_planes) {
- case 0:
- case 1:
- case 3:
- case 7:
- denali->dev_info.bPlaneNum = no_of_planes + 1;
- break;
- default:
- status = FAIL;
- break;
- }
-
find_valid_banks(denali);
detect_partition_feature(denali);
- dump_device_info(denali);
-
/* If the user specified to override the default timings
* with a specific ONFI mode, we apply those changes here.
*/
denali_nand_timing_set(denali);
- /* MTD supported page sizes vary by kernel. We validate our
- * kernel supports the device here.
- */
- if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
- ret = -ENODEV;
- printk(KERN_ERR "Spectra: device size not supported by this "
- "version of MTD.");
- goto failed_nand;
- }
-
nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
goto failed_nand;
}
+ /* MTD supported page sizes vary by kernel. We validate our
+ * kernel supports the device here.
+ */
+ if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
+ ret = -ENODEV;
+ printk(KERN_ERR "Spectra: device size not supported by this "
+ "version of MTD.");
+ goto failed_nand;
+ }
+
/* second stage of the NAND scan
* this stage requires information regarding ECC and
* bad block management. */
denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- if (denali->dev_info.MLCDevice) {
+ if (denali->nand.cellinfo & 0xc) {
denali->nand.ecc.layout = &nand_oob_mlc_14bit;
denali->nand.ecc.bytes = ECC_BYTES_MLC;
} else {/* SLC */
denali->nand.ecc.bytes = ECC_BYTES_SLC;
}
+ /* Let driver know the total blocks number and
+ * how many blocks contained by each nand chip.
+ * blksperchip will help driver to know how many
+ * blocks is taken by FW.
+ * */
+ denali->totalblks = denali->mtd.size >>
+ denali->nand.phys_erase_shift;
+ denali->blksperchip = denali->totalblks / denali->nand.numchips;
+
/* These functions are required by the NAND core framework, otherwise,
* the NAND core will assert. However, we don't need them, so we'll stub
* them out. */
projects / mv-sheeva.git / commitdiff