]> git.karo-electronics.de Git - linux-beck.git/commitdiff
mtd: nand: Add support to use nand_base poi databuf as bounce buffer
authorKamal Dasu <kdasu.kdev@gmail.com>
Fri, 2 May 2014 00:51:19 +0000 (20:51 -0400)
committerBrian Norris <computersforpeace@gmail.com>
Tue, 20 May 2014 23:35:32 +0000 (16:35 -0700)
nand_base can be passed a kmap()'d buffers from highmem by
filesystems like jffs2. This results in failure to map the
physical address of the DMA buffer on various contoller
driver on different platforms. This change adds a chip option
to use preallocated databuf as bounce buffers used in
nand_do_read_ops() and nand_do_write_ops().
This allows for specific nand controller driver to set this
option as needed.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
drivers/mtd/nand/nand_base.c
include/linux/mtd/nand.h

index 7853b9b0a05ed8b8b8cd11adf641b3e4e7b1c6a0..1b844b8c621f1abaa0f719f189c70ad264edb6f6 100644 (file)
@@ -37,6 +37,7 @@
 #include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/mm.h>
 #include <linux/types.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -1500,6 +1501,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
                mtd->oobavail : mtd->oobsize;
 
        uint8_t *bufpoi, *oob, *buf;
+       int use_bufpoi;
        unsigned int max_bitflips = 0;
        int retry_mode = 0;
        bool ecc_fail = false;
@@ -1522,9 +1524,20 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
                bytes = min(mtd->writesize - col, readlen);
                aligned = (bytes == mtd->writesize);
 
+               if (!aligned)
+                       use_bufpoi = 1;
+               else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+                       use_bufpoi = !virt_addr_valid(buf);
+               else
+                       use_bufpoi = 0;
+
                /* Is the current page in the buffer? */
                if (realpage != chip->pagebuf || oob) {
-                       bufpoi = aligned ? buf : chip->buffers->databuf;
+                       bufpoi = use_bufpoi ? chip->buffers->databuf : buf;
+
+                       if (use_bufpoi && aligned)
+                               pr_debug("%s: using read bounce buffer for buf@%p\n",
+                                                __func__, buf);
 
 read_retry:
                        chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
@@ -1546,7 +1559,7 @@ read_retry:
                                ret = chip->ecc.read_page(mtd, chip, bufpoi,
                                                          oob_required, page);
                        if (ret < 0) {
-                               if (!aligned)
+                               if (use_bufpoi)
                                        /* Invalidate page cache */
                                        chip->pagebuf = -1;
                                break;
@@ -1555,7 +1568,7 @@ read_retry:
                        max_bitflips = max_t(unsigned int, max_bitflips, ret);
 
                        /* Transfer not aligned data */
-                       if (!aligned) {
+                       if (use_bufpoi) {
                                if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
                                    !(mtd->ecc_stats.failed - ecc_failures) &&
                                    (ops->mode != MTD_OPS_RAW)) {
@@ -2375,11 +2388,23 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
                int bytes = mtd->writesize;
                int cached = writelen > bytes && page != blockmask;
                uint8_t *wbuf = buf;
+               int use_bufpoi;
+               int part_pagewr = (column || writelen < (mtd->writesize - 1));
+
+               if (part_pagewr)
+                       use_bufpoi = 1;
+               else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+                       use_bufpoi = !virt_addr_valid(buf);
+               else
+                       use_bufpoi = 0;
 
-               /* Partial page write? */
-               if (unlikely(column || writelen < (mtd->writesize - 1))) {
+               /* Partial page write?, or need to use bounce buffer */
+               if (use_bufpoi) {
+                       pr_debug("%s: using write bounce buffer for buf@%p\n",
+                                        __func__, buf);
                        cached = 0;
-                       bytes = min_t(int, bytes - column, (int) writelen);
+                       if (part_pagewr)
+                               bytes = min_t(int, bytes - column, writelen);
                        chip->pagebuf = -1;
                        memset(chip->buffers->databuf, 0xff, mtd->writesize);
                        memcpy(&chip->buffers->databuf[column], buf, bytes);
index 7a922e6c4e4b9a489c2529dacf67fc50a4d48948..2f0af2891f0f82c7ccf9bd2cb1b4b8dd7c4f491d 100644 (file)
@@ -175,6 +175,11 @@ typedef enum {
 #define NAND_OWN_BUFFERS       0x00020000
 /* Chip may not exist, so silence any errors in scan */
 #define NAND_SCAN_SILENT_NODEV 0x00040000
+/*
+ * This option could be defined by controller drivers to protect against
+ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
+ */
+#define NAND_USE_BOUNCE_BUFFER 0x00080000
 /*
  * Autodetect nand buswidth with readid/onfi.
  * This suppose the driver will configure the hardware in 8 bits mode