return 0;
}
+/**
+ * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
+ * @oh: struct omap_hwmod *
+ *
+ * The DMADISABLE bit is a semi-automatic bit present in sysconfig register
+ * of some modules. When the DMA must perform read/write accesses, the
+ * DMADISABLE bit is cleared by the hardware. But when the DMA must stop
+ * for power management, software must set the DMADISABLE bit back to 1.
+ *
+ * Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_dmadisable(struct omap_hwmod *oh)
+{
+ u32 v;
+ u32 dmadisable_mask;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
+ return -EINVAL;
+
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+ return -EINVAL;
+ }
+
+ /* clocks must be on for this operation */
+ if (oh->_state != _HWMOD_STATE_ENABLED) {
+ pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
+ return -EINVAL;
+ }
+
+ pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
+
+ v = oh->_sysc_cache;
+ dmadisable_mask =
+ (0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
+ v |= dmadisable_mask;
+ _write_sysconfig(v, oh);
+
+ return 0;
+}
+
/**
* _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
* @oh: struct omap_hwmod *
* therefore have no OCP header registers to access. Others (like the
* IVA) have idiosyncratic reset sequences. So for these relatively
* rare cases, custom reset code can be supplied in the struct
- * omap_hwmod_class .reset function pointer. Passes along the return
- * value from either _ocp_softreset() or the custom reset function -
- * these must return -EINVAL if the hwmod cannot be reset this way or
- * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
- * not reset in time, or 0 upon success.
+ * omap_hwmod_class .reset function pointer.
+ *
+ * _set_dmadisable() is called to set the DMADISABLE bit so that it
+ * does not prevent idling of the system. This is necessary for cases
+ * where ROMCODE/BOOTLOADER uses dma and transfers control to the
+ * kernel without disabling dma.
+ *
+ * Passes along the return value from either _ocp_softreset() or the
+ * custom reset function - these must return -EINVAL if the hwmod
+ * cannot be reset this way or if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
*/
static int _reset(struct omap_hwmod *oh)
{
}
}
+ _set_dmadisable(oh);
+
/*
* OCP_SYSCONFIG bits need to be reprogrammed after a
* softreset. The _enable() function should be split to avoid
#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT 16
+#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
#define SYSS_HAS_RESET_STATUS (1 << 7)
#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
#define SYSC_HAS_RESET_STATUS (1 << 9)
+#define SYSC_HAS_DMADISABLE (1 << 10)
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
* @enwkup_shift: Offset of the enawakeup bit
* @srst_shift: Offset of the softreset bit
* @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
*/
struct omap_hwmod_sysc_fields {
u8 midle_shift;
u8 enwkup_shift;
u8 srst_shift;
u8 autoidle_shift;
+ u8 dmadisable_shift;
};
/**