ARM: dts: omap4-panda-es: Use OMAP4_IOPAD pinmux macro

Use the pinmux IOPAD macros to define the register as an offset from
the padconf physical address instead of the offset from padconf base.
This makes the DTS easier to read since matches the addresses listed
in the Technical Reference Manual.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 2f1dabcc6adfbda07ea62af45254c9ef8d6a87ef..119f8e657edc9bae37089588968b660c9c3749da 100644 (file)
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,23 +34,23 @@
 /* PandaboardES has external pullups on SCL & SDA */
 &dss_hdmi_pins {
        pinctrl-single,pins = <
-               0x5a (PIN_INPUT_PULLUP | MUX_MODE0)     /* hdmi_cec.hdmi_cec */
-               0x5c (PIN_INPUT | MUX_MODE0)            /* hdmi_scl.hdmi_scl */
-               0x5e (PIN_INPUT | MUX_MODE0)            /* hdmi_sda.hdmi_sda */
+               OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)        /* hdmi_cec.hdmi_cec */
+               OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)               /* hdmi_scl.hdmi_scl */
+               OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)               /* hdmi_sda.hdmi_sda */
                >;
 };
 
 &omap4_pmx_core {
        led_gpio_pins: gpio_led_pmx {
                pinctrl-single,pins = <
-                       0xb6 (PIN_OUTPUT | MUX_MODE3)   /* gpio_110 */
+                       OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)      /* gpio_110 */
                >;
        };
 };
 
 &led_wkgpio_pins {
        pinctrl-single,pins = <
-               0x1c (PIN_OUTPUT | MUX_MODE3)   /* gpio_wk8 */
+               OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)      /* gpio_wk8 */
        >;
 };