ARM: dts: imx7d: sbc-imx7: add basic board support

SBC-iMX7 is a single board computer designed for industrial
and embedded applications. It is based on the Freescale i.MX7
system-on-chip. SBC-iMX7 is implemented with the CL-SOM-iMX7
System-on-Module providing most of the functions, and SB-SOM-iMX7
carrier board providing additional peripheral functions and
connectors.

http://www.compulab.co.il/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/

http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/

Add basic board support, including SD card as a secondary boot and storage device

Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c0d7a9661e9c85248827ad8e75cb133708edc0da..0b00a9cad8c9242c5ece10a6d111962d5d623731 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -353,6 +353,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
        imx6ul-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
        imx7d-cl-som-imx7.dtb \
+       imx7d-sbc-imx7.dtb \
        imx7d-sdb.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
        ls1021a-qds.dtb \

diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
new file mode 100644 (file)
index 0000000..d63c597
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
@@ -0,0 +1,42 @@
+/*
+ * Support for CompuLab SBC-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+       model = "CompuLab SBC-iMX7";
+       compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+};
+
+&usdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc1>;
+       cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+       wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+       enable-sdio-wakeup;
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl_usdhc1: usdhc1grp {
+               fsl,pins = <
+                       MX7D_PAD_SD1_CMD__SD1_CMD               0x59
+                       MX7D_PAD_SD1_CLK__SD1_CLK               0x19
+                       MX7D_PAD_SD1_DATA0__SD1_DATA0           0x59
+                       MX7D_PAD_SD1_DATA1__SD1_DATA1           0x59
+                       MX7D_PAD_SD1_DATA2__SD1_DATA2           0x59
+                       MX7D_PAD_SD1_DATA3__SD1_DATA3           0x59
+                       MX7D_PAD_SD1_CD_B__GPIO5_IO0            0x59 /* CD */
+                       MX7D_PAD_SD1_WP__GPIO5_IO1              0x59 /* WP */
+               >;
+       };
+};