#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include "iwl-wifi.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
/*
* Calibration
*/
-static int iwl_set_Xtal_calib(struct iwl_priv *priv)
+static int iwl_set_Xtal_calib(struct iwl_trans *trans)
{
struct iwl_calib_xtal_freq_cmd cmd;
__le16 *xtal_calib =
- (__le16 *)iwl_eeprom_query_addr(priv->shrd, EEPROM_XTAL);
+ (__le16 *)iwl_eeprom_query_addr(trans->shrd, EEPROM_XTAL);
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
- return iwl_calib_set(trans(priv), (void *)&cmd, sizeof(cmd));
+ return iwl_calib_set(trans, (void *)&cmd, sizeof(cmd));
}
-static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
+static int iwl_set_temperature_offset_calib(struct iwl_trans *trans)
{
struct iwl_calib_temperature_offset_cmd cmd;
__le16 *offset_calib =
- (__le16 *)iwl_eeprom_query_addr(priv->shrd,
+ (__le16 *)iwl_eeprom_query_addr(trans->shrd,
EEPROM_RAW_TEMPERATURE);
memset(&cmd, 0, sizeof(cmd));
if (!(cmd.radio_sensor_offset))
cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
- IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n",
+ IWL_DEBUG_CALIB(trans, "Radio sensor offset: %d\n",
le16_to_cpu(cmd.radio_sensor_offset));
- return iwl_calib_set(trans(priv), (void *)&cmd, sizeof(cmd));
+ return iwl_calib_set(trans, (void *)&cmd, sizeof(cmd));
}
-static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
+static int iwl_set_temperature_offset_calib_v2(struct iwl_trans *trans)
{
struct iwl_calib_temperature_offset_v2_cmd cmd;
- __le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(priv->shrd,
+ __le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(trans->shrd,
EEPROM_KELVIN_TEMPERATURE);
__le16 *offset_calib_low =
- (__le16 *)iwl_eeprom_query_addr(priv->shrd,
+ (__le16 *)iwl_eeprom_query_addr(trans->shrd,
EEPROM_RAW_TEMPERATURE);
struct iwl_eeprom_calib_hdr *hdr;
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
- hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv->shrd,
+ hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(trans->shrd,
EEPROM_CALIB_ALL);
memcpy(&cmd.radio_sensor_offset_high, offset_calib_high,
sizeof(*offset_calib_high));
memcpy(&cmd.radio_sensor_offset_low, offset_calib_low,
sizeof(*offset_calib_low));
if (!(cmd.radio_sensor_offset_low)) {
- IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
+ IWL_DEBUG_CALIB(trans, "no info in EEPROM, use default\n");
cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
}
memcpy(&cmd.burntVoltageRef, &hdr->voltage,
sizeof(hdr->voltage));
- IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
+ IWL_DEBUG_CALIB(trans, "Radio sensor offset high: %d\n",
le16_to_cpu(cmd.radio_sensor_offset_high));
- IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n",
+ IWL_DEBUG_CALIB(trans, "Radio sensor offset low: %d\n",
le16_to_cpu(cmd.radio_sensor_offset_low));
- IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n",
+ IWL_DEBUG_CALIB(trans, "Voltage Ref: %d\n",
le16_to_cpu(cmd.burntVoltageRef));
- return iwl_calib_set(trans(priv), (void *)&cmd, sizeof(cmd));
+ return iwl_calib_set(trans, (void *)&cmd, sizeof(cmd));
}
static int iwl_send_calib_cfg(struct iwl_trans *trans)
return 0;
}
-int iwlagn_init_alive_start(struct iwl_priv *priv)
+int iwl_init_alive_start(struct iwl_trans *trans)
{
int ret;
- if (cfg(priv)->bt_params &&
- cfg(priv)->bt_params->advanced_bt_coexist) {
+ if (cfg(trans)->bt_params &&
+ cfg(trans)->bt_params->advanced_bt_coexist) {
/*
* Tell uCode we are ready to perform calibration
* need to perform this before any calibration
* no need to close the envlope since we are going
* to load the runtime uCode later.
*/
- ret = iwl_send_bt_env(trans(priv), IWL_BT_COEX_ENV_OPEN,
+ ret = iwl_send_bt_env(trans, IWL_BT_COEX_ENV_OPEN,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
if (ret)
return ret;
}
- ret = iwl_send_calib_cfg(trans(priv));
+ ret = iwl_send_calib_cfg(trans);
if (ret)
return ret;
* temperature offset calibration is only needed for runtime ucode,
* so prepare the value now.
*/
- if (cfg(priv)->need_temp_offset_calib) {
- if (cfg(priv)->temp_offset_v2)
- return iwl_set_temperature_offset_calib_v2(priv);
+ if (cfg(trans)->need_temp_offset_calib) {
+ if (cfg(trans)->temp_offset_v2)
+ return iwl_set_temperature_offset_calib_v2(trans);
else
- return iwl_set_temperature_offset_calib(priv);
+ return iwl_set_temperature_offset_calib(trans);
}
return 0;
}
-static int iwl_send_wimax_coex(struct iwl_priv *priv)
+static int iwl_send_wimax_coex(struct iwl_trans *trans)
{
struct iwl_wimax_coex_cmd coex_cmd;
- if (cfg(priv)->base_params->support_wimax_coexist) {
+ if (cfg(trans)->base_params->support_wimax_coexist) {
/* UnMask wake up src at associated sleep */
coex_cmd.flags = COEX_FLAGS_ASSOC_WA_UNMASK_MSK;
/* coexistence is disabled */
memset(&coex_cmd, 0, sizeof(coex_cmd));
}
- return iwl_trans_send_cmd_pdu(trans(priv),
+ return iwl_trans_send_cmd_pdu(trans,
COEX_PRIORITY_TABLE_CMD, CMD_SYNC,
sizeof(coex_cmd), &coex_cmd);
}
}
-static int iwl_alive_notify(struct iwl_priv *priv)
+static int iwl_alive_notify(struct iwl_trans *trans)
{
+ struct iwl_priv *priv = priv(trans);
struct iwl_rxon_context *ctx;
int ret;
if (!priv->tx_cmd_pool)
return -ENOMEM;
- iwl_trans_tx_start(trans(priv));
+ iwl_trans_tx_start(trans);
for_each_context(priv, ctx)
ctx->last_tx_rejected = false;
- ret = iwl_send_wimax_coex(priv);
+ ret = iwl_send_wimax_coex(trans);
if (ret)
return ret;
if (!cfg(priv)->no_xtal_calib) {
- ret = iwl_set_Xtal_calib(priv);
+ ret = iwl_set_Xtal_calib(trans);
if (ret)
return ret;
}
- return iwl_send_calib_results(trans(priv));
+ return iwl_send_calib_results(trans);
}
return -EIO;
}
-struct iwlagn_alive_data {
+struct iwl_alive_data {
bool valid;
u8 subtype;
};
struct iwl_rx_packet *pkt,
void *data)
{
- struct iwlagn_alive_data *alive_data = data;
+ struct iwl_alive_data *alive_data = data;
struct iwl_alive_resp *palive;
palive = &pkt->u.alive_frame;
#define UCODE_ALIVE_TIMEOUT HZ
#define UCODE_CALIB_TIMEOUT (2*HZ)
-int iwlagn_load_ucode_wait_alive(struct iwl_priv *priv,
+int iwl_load_ucode_wait_alive(struct iwl_trans *trans,
enum iwl_ucode_type ucode_type)
{
struct iwl_notification_wait alive_wait;
- struct iwlagn_alive_data alive_data;
- struct iwl_trans *trans = trans(priv);
+ struct iwl_alive_data alive_data;
int ret;
enum iwl_ucode_type old_type;
}
if (!alive_data.valid) {
- IWL_ERR(priv, "Loaded ucode is not valid!\n");
+ IWL_ERR(trans, "Loaded ucode is not valid!\n");
trans->shrd->ucode_type = old_type;
return -EIO;
}
msleep(5);
}
- ret = iwl_alive_notify(priv);
+ ret = iwl_alive_notify(trans);
if (ret) {
- IWL_WARN(priv,
+ IWL_WARN(trans,
"Could not complete ALIVE transition: %d\n", ret);
trans->shrd->ucode_type = old_type;
return ret;
return 0;
}
-int iwlagn_run_init_ucode(struct iwl_priv *priv)
+int iwl_run_init_ucode(struct iwl_trans *trans)
{
struct iwl_notification_wait calib_wait;
int ret;
- lockdep_assert_held(&priv->shrd->mutex);
+ lockdep_assert_held(&trans->shrd->mutex);
/* No init ucode required? Curious, but maybe ok */
- if (!trans(priv)->ucode_init.code.len)
+ if (!trans->ucode_init.code.len)
return 0;
- if (priv->shrd->ucode_type != IWL_UCODE_NONE)
+ if (trans->shrd->ucode_type != IWL_UCODE_NONE)
return 0;
- iwl_init_notification_wait(priv->shrd, &calib_wait,
+ iwl_init_notification_wait(trans->shrd, &calib_wait,
CALIBRATION_COMPLETE_NOTIFICATION,
NULL, NULL);
/* Will also start the device */
- ret = iwlagn_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
+ ret = iwl_load_ucode_wait_alive(trans, IWL_UCODE_INIT);
if (ret)
goto error;
- ret = iwlagn_init_alive_start(priv);
+ ret = iwl_init_alive_start(trans);
if (ret)
goto error;
* Some things may run in the background now, but we
* just wait for the calibration complete notification.
*/
- ret = iwl_wait_notification(priv->shrd, &calib_wait,
+ ret = iwl_wait_notification(trans->shrd, &calib_wait,
UCODE_CALIB_TIMEOUT);
goto out;
error:
- iwl_remove_notification(priv->shrd, &calib_wait);
+ iwl_remove_notification(trans->shrd, &calib_wait);
out:
/* Whatever happened, stop the device */
- iwl_trans_stop_device(trans(priv));
+ iwl_trans_stop_device(trans);
return ret;
}
--- /dev/null
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __iwl_wifi_h__
+#define __iwl_wifi_h__
+
+#include "iwl-shared.h"
+
+int iwl_send_bt_env(struct iwl_trans *trans, u8 action, u8 type);
+void iwl_send_prio_tbl(struct iwl_trans *trans);
+int iwl_init_alive_start(struct iwl_trans *trans);
+int iwl_run_init_ucode(struct iwl_trans *trans);
+int iwl_load_ucode_wait_alive(struct iwl_trans *trans,
+ enum iwl_ucode_type ucode_type);
+#endif /* __iwl_wifi_h__ */
projects / karo-tx-linux.git / commitdiff