* There is many registers between customer version address and awb one. For
* more specific contents, see definition if file m5mols.h.
*/
-#define CAT0_VER_CUSTOMER 0x00 /* customer version */
-#define CAT0_VER_PROJECT 0x01 /* project version */
-#define CAT0_VER_FIRMWARE 0x02 /* Firmware version */
-#define CAT0_VER_HARDWARE 0x04 /* Hardware version */
-#define CAT0_VER_PARAMETER 0x06 /* Parameter version */
-#define CAT0_VER_AWB 0x08 /* Auto WB version */
-#define CAT0_VER_STRING 0x0a /* string including M-5MOLS */
-#define CAT0_SYSMODE 0x0b /* SYSTEM mode register */
-#define CAT0_STATUS 0x0c /* SYSTEM mode status register */
-#define CAT0_INT_FACTOR 0x10 /* interrupt pending register */
-#define CAT0_INT_ENABLE 0x11 /* interrupt enable register */
-
-#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1)
-#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1)
-#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2)
-#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2)
-#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2)
-#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2)
-
-#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1)
+#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, 0x00, 1)
+#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, 0x01, 1)
+#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, 0x02, 2)
+#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, 0x04, 2)
+#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, 0x06, 2)
+#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, 0x08, 2)
+
+#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, 0x0b, 1)
#define REG_SYSINIT 0x00 /* SYSTEM mode */
#define REG_PARAMETER 0x01 /* PARAMETER mode */
#define REG_MONITOR 0x02 /* MONITOR mode */
#define REG_CAPTURE 0x03 /* CAPTURE mode */
#define SYSTEM_CMD(__cmd) I2C_REG(CAT_SYSTEM, cmd, 1)
-#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, CAT0_VER_STRING, 1)
+#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, 0x0a, 1)
#define REG_SAMSUNG_ELECTRO "SE" /* Samsung Electro-Mechanics */
#define REG_SAMSUNG_OPTICS "OP" /* Samsung Fiber-Optics */
#define REG_SAMSUNG_TECHWIN "TB" /* Samsung Techwin */
+/* SYSTEM mode status */
+#define SYSTEM_STATUS I2C_REG(CAT_SYSTEM, 0x0c, 1)
-#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, CAT0_INT_FACTOR, 1)
-#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, CAT0_INT_ENABLE, 1)
+/* Interrupt pending register */
+#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, 0x10, 1)
+/* interrupt enable register */
+#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, 0x11, 1)
#define REG_INT_MODE (1 << 0)
#define REG_INT_AF (1 << 1)
#define REG_INT_ZOOM (1 << 2)
* can handle with preview(MONITOR) resolution size/frame per second/interface
* between the sensor and the Application Processor/even the image effect.
*/
-#define CAT1_DATA_INTERFACE 0x00 /* interface between sensor and AP */
-#define CAT1_MONITOR_SIZE 0x01 /* resolution at the MONITOR mode */
-#define CAT1_MONITOR_FPS 0x02 /* frame per second at this mode */
-#define CAT1_EFFECT 0x0b /* image effects */
-#define PARM_MON_SIZE I2C_REG(CAT_PARAM, CAT1_MONITOR_SIZE, 1)
+/* Resolution in the MONITOR mode */
+#define PARM_MON_SIZE I2C_REG(CAT_PARAM, 0x01, 1)
-#define PARM_MON_FPS I2C_REG(CAT_PARAM, CAT1_MONITOR_FPS, 1)
+/* Frame rate */
+#define PARM_MON_FPS I2C_REG(CAT_PARAM, 0x02, 1)
#define REG_FPS_30 0x02
-#define PARM_INTERFACE I2C_REG(CAT_PARAM, CAT1_DATA_INTERFACE, 1)
+/* Video bus between the sensor and a host processor */
+#define PARM_INTERFACE I2C_REG(CAT_PARAM, 0x00, 1)
#define REG_INTERFACE_MIPI 0x02
-#define PARM_EFFECT I2C_REG(CAT_PARAM, CAT1_EFFECT, 1)
+/* Image effects */
+#define PARM_EFFECT I2C_REG(CAT_PARAM, 0x0b, 1)
#define REG_EFFECT_OFF 0x00
#define REG_EFFECT_NEGA 0x01
#define REG_EFFECT_EMBOSS 0x06
* another options like zoom/color effect(different with effect in PARAMETER
* mode)/anti hand shaking algorithm.
*/
-#define CAT2_ZOOM 0x01 /* set the zoom position & execute */
-#define CAT2_ZOOM_STEP 0x03 /* set the zoom step */
-#define CAT2_CFIXB 0x09 /* CB value for color effect */
-#define CAT2_CFIXR 0x0a /* CR value for color effect */
-#define CAT2_COLOR_EFFECT 0x0b /* set on/off of color effect */
-#define CAT2_CHROMA_LVL 0x0f /* set chroma level */
-#define CAT2_CHROMA_EN 0x10 /* set on/off of choroma */
-#define CAT2_EDGE_LVL 0x11 /* set sharpness level */
-#define CAT2_EDGE_EN 0x12 /* set on/off sharpness */
-#define CAT2_TONE_CTL 0x25 /* set tone color(contrast) */
-
-#define MON_ZOOM I2C_REG(CAT_MONITOR, CAT2_ZOOM, 1)
-
-#define MON_CFIXR I2C_REG(CAT_MONITOR, CAT2_CFIXR, 1)
-#define MON_CFIXB I2C_REG(CAT_MONITOR, CAT2_CFIXB, 1)
+
+/* Target digital zoom position */
+#define MON_ZOOM I2C_REG(CAT_MONITOR, 0x01, 1)
+
+/* CR value for color effect */
+#define MON_CFIXR I2C_REG(CAT_MONITOR, 0x0a, 1)
+/* CB value for color effect */
+#define MON_CFIXB I2C_REG(CAT_MONITOR, 0x09, 1)
#define REG_CFIXB_SEPIA 0xd8
#define REG_CFIXR_SEPIA 0x18
-#define MON_EFFECT I2C_REG(CAT_MONITOR, CAT2_COLOR_EFFECT, 1)
+#define MON_EFFECT I2C_REG(CAT_MONITOR, 0x0b, 1)
#define REG_COLOR_EFFECT_OFF 0x00
#define REG_COLOR_EFFECT_ON 0x01
-#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, CAT2_CHROMA_EN, 1)
-#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, CAT2_CHROMA_LVL, 1)
+/* Chroma enable */
+#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, 0x10, 1)
+/* Chroma level */
+#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, 0x0f, 1)
#define REG_CHROMA_OFF 0x00
#define REG_CHROMA_ON 0x01
-#define MON_EDGE_EN I2C_REG(CAT_MONITOR, CAT2_EDGE_EN, 1)
-#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, CAT2_EDGE_LVL, 1)
+/* Sharpness on/off */
+#define MON_EDGE_EN I2C_REG(CAT_MONITOR, 0x12, 1)
+/* Sharpness level */
+#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, 0x11, 1)
#define REG_EDGE_OFF 0x00
#define REG_EDGE_ON 0x01
-#define MON_TONE_CTL I2C_REG(CAT_MONITOR, CAT2_TONE_CTL, 1)
+/* Set color tone (contrast) */
+#define MON_TONE_CTL I2C_REG(CAT_MONITOR, 0x25, 1)
/*
* Category 3 - Auto Exposure
* different. So, this category also provide getting the max/min values. And,
* each MONITOR and CAPTURE mode has each gain/shutter/max exposure values.
*/
-#define CAT3_AE_LOCK 0x00 /* locking Auto exposure */
-#define CAT3_AE_MODE 0x01 /* set AE mode, mode means range */
-#define CAT3_ISO 0x05 /* set ISO */
-#define CAT3_EV_PRESET_MONITOR 0x0a /* EV(scenemode) preset for MONITOR */
-#define CAT3_EV_PRESET_CAPTURE 0x0b /* EV(scenemode) preset for CAPTURE */
-#define CAT3_MANUAL_GAIN_MON 0x12 /* meteoring value for the MONITOR */
-#define CAT3_MAX_GAIN_MON 0x1a /* max gain value for the MONITOR */
-#define CAT3_MANUAL_GAIN_CAP 0x26 /* meteoring value for the CAPTURE */
-#define CAT3_AE_INDEX 0x38 /* AE index */
-
-#define AE_LOCK I2C_REG(CAT_AE, CAT3_AE_LOCK, 1)
+
+/* Auto Exposure locking */
+#define AE_LOCK I2C_REG(CAT_AE, 0x00, 1)
#define REG_AE_UNLOCK 0x00
#define REG_AE_LOCK 0x01
-#define AE_MODE I2C_REG(CAT_AE, CAT3_AE_MODE, 1)
+/* Auto Exposure algorithm mode */
+#define AE_MODE I2C_REG(CAT_AE, 0x01, 1)
#define REG_AE_OFF 0x00 /* AE off */
#define REG_AE_ALL 0x01 /* calc AE in all block integral */
#define REG_AE_CENTER 0x03 /* calc AE in center weighted */
#define REG_AE_SPOT 0x06 /* calc AE in specific spot */
-#define AE_ISO I2C_REG(CAT_AE, CAT3_ISO, 1)
+#define AE_ISO I2C_REG(CAT_AE, 0x05, 1)
#define REG_ISO_AUTO 0x00
#define REG_ISO_50 0x01
#define REG_ISO_100 0x02
#define REG_ISO_400 0x04
#define REG_ISO_800 0x05
-#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, CAT3_EV_PRESET_MONITOR, 1)
-#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, CAT3_EV_PRESET_CAPTURE, 1)
+/* EV (scenemode) preset for MONITOR */
+#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, 0x0a, 1)
+/* EV (scenemode) preset for CAPTURE */
+#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, 0x0b, 1)
#define REG_SCENE_NORMAL 0x00
#define REG_SCENE_PORTRAIT 0x01
#define REG_SCENE_LANDSCAPE 0x02
#define REG_SCENE_TEXT 0x0c
#define REG_SCENE_CANDLE 0x0d
-#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_MON, 2)
-#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, CAT3_MAX_GAIN_MON, 2)
-#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_CAP, 2)
+/* Manual gain in MONITOR mode */
+#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, 0x12, 2)
+/* Maximum gain in MONITOR mode */
+#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, 0x1a, 2)
+/* Manual gain in CAPTURE mode */
+#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, 0x26, 2)
-#define AE_INDEX I2C_REG(CAT_AE, CAT3_AE_INDEX, 1)
+#define AE_INDEX I2C_REG(CAT_AE, 0x38, 1)
#define REG_AE_INDEX_20_NEG 0x00
#define REG_AE_INDEX_15_NEG 0x01
#define REG_AE_INDEX_10_NEG 0x02
/*
* Category 6 - White Balance
- *
- * This category provide AWB locking/mode/preset/speed/gain bias, etc.
*/
-#define CAT6_AWB_LOCK 0x00 /* locking Auto Whitebalance */
-#define CAT6_AWB_MODE 0x02 /* set Auto or Manual */
-#define CAT6_AWB_MANUAL 0x03 /* set Manual(preset) value */
-#define AWB_LOCK I2C_REG(CAT_WB, CAT6_AWB_LOCK, 1)
+/* Auto Whitebalance locking */
+#define AWB_LOCK I2C_REG(CAT_WB, 0x00, 1)
#define REG_AWB_UNLOCK 0x00
#define REG_AWB_LOCK 0x01
-#define AWB_MODE I2C_REG(CAT_WB, CAT6_AWB_MODE, 1)
+#define AWB_MODE I2C_REG(CAT_WB, 0x02, 1)
#define REG_AWB_AUTO 0x01 /* AWB off */
#define REG_AWB_PRESET 0x02 /* AWB preset */
-#define AWB_MANUAL I2C_REG(CAT_WB, CAT6_AWB_MANUAL, 1)
+/* Manual WB (preset) */
+#define AWB_MANUAL I2C_REG(CAT_WB, 0x03, 1)
#define REG_AWB_INCANDESCENT 0x01
#define REG_AWB_FLUORESCENT_1 0x02
#define REG_AWB_FLUORESCENT_2 0x03
/*
* Category 7 - EXIF information
*/
-#define CAT7_INFO_EXPTIME_NU 0x00
-#define CAT7_INFO_EXPTIME_DE 0x04
-#define CAT7_INFO_TV_NU 0x08
-#define CAT7_INFO_TV_DE 0x0c
-#define CAT7_INFO_AV_NU 0x10
-#define CAT7_INFO_AV_DE 0x14
-#define CAT7_INFO_BV_NU 0x18
-#define CAT7_INFO_BV_DE 0x1c
-#define CAT7_INFO_EBV_NU 0x20
-#define CAT7_INFO_EBV_DE 0x24
-#define CAT7_INFO_ISO 0x28
-#define CAT7_INFO_FLASH 0x2a
-#define CAT7_INFO_SDR 0x2c
-#define CAT7_INFO_QVAL 0x2e
-
-#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_NU, 4)
-#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_DE, 4)
-#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, CAT7_INFO_TV_NU, 4)
-#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, CAT7_INFO_TV_DE, 4)
-#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, CAT7_INFO_AV_NU, 4)
-#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, CAT7_INFO_AV_DE, 4)
-#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, CAT7_INFO_BV_NU, 4)
-#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, CAT7_INFO_BV_DE, 4)
-#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, CAT7_INFO_EBV_NU, 4)
-#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, CAT7_INFO_EBV_DE, 4)
-#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, CAT7_INFO_ISO, 2)
-#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, CAT7_INFO_FLASH, 2)
-#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, CAT7_INFO_SDR, 2)
-#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, CAT7_INFO_QVAL, 2)
+#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, 0x00, 4)
+#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, 0x04, 4)
+#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, 0x08, 4)
+#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, 0x0c, 4)
+#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, 0x10, 4)
+#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, 0x14, 4)
+#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, 0x18, 4)
+#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, 0x1c, 4)
+#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, 0x20, 4)
+#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, 0x24, 4)
+#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, 0x28, 2)
+#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, 0x2a, 2)
+#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, 0x2c, 2)
+#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, 0x2e, 2)
/*
* Category 9 - Face Detection
*/
-#define CAT9_FD_CTL 0x00
-
-#define FD_CTL I2C_REG(CAT_FD, CAT9_FD_CTL, 1)
+#define FD_CTL I2C_REG(CAT_FD, 0x00, 1)
#define BIT_FD_EN 0
#define BIT_FD_DRAW_FACE_FRAME 4
#define BIT_FD_DRAW_SMILE_LVL 6
/*
* Category A - Lens Parameter
*/
-#define CATA_AF_MODE 0x01
-#define CATA_AF_EXECUTE 0x02
-#define CATA_AF_STATUS 0x03
-#define CATA_AF_VERSION 0x0a
-
-#define AF_MODE I2C_REG(CAT_LENS, CATA_AF_MODE, 1)
+#define AF_MODE I2C_REG(CAT_LENS, 0x01, 1)
#define REG_AF_NORMAL 0x00 /* Normal AF, one time */
#define REG_AF_MACRO 0x01 /* Macro AF, one time */
#define REG_AF_POWEROFF 0x07
-#define AF_EXECUTE I2C_REG(CAT_LENS, CATA_AF_EXECUTE, 1)
+#define AF_EXECUTE I2C_REG(CAT_LENS, 0x02, 1)
#define REG_AF_STOP 0x00
#define REG_AF_EXE_AUTO 0x01
#define REG_AF_EXE_CAF 0x02
-#define AF_STATUS I2C_REG(CAT_LENS, CATA_AF_STATUS, 1)
+#define AF_STATUS I2C_REG(CAT_LENS, 0x03, 1)
#define REG_AF_FAIL 0x00
#define REG_AF_SUCCESS 0x02
#define REG_AF_IDLE 0x04
#define REG_AF_BUSY 0x05
-#define AF_VERSION I2C_REG(CAT_LENS, CATA_AF_VERSION, 1)
+#define AF_VERSION I2C_REG(CAT_LENS, 0x0a, 1)
/*
* Category B - CAPTURE Parameter
*/
-#define CATB_YUVOUT_MAIN 0x00
-#define CATB_MAIN_IMAGE_SIZE 0x01
-#define CATB_MCC_MODE 0x1d
-#define CATB_WDR_EN 0x2c
-#define CATB_LIGHT_CTRL 0x40
-#define CATB_FLASH_CTRL 0x41
-
-#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, CATB_YUVOUT_MAIN, 1)
+#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, 0x00, 1)
#define REG_YUV422 0x00
#define REG_BAYER10 0x05
#define REG_BAYER8 0x06
#define REG_JPEG 0x10
-#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, CATB_MAIN_IMAGE_SIZE, 1)
+#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, 0x01, 1)
-#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, CATB_MCC_MODE, 1)
+#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, 0x1d, 1)
#define REG_MCC_OFF 0x00
#define REG_MCC_NORMAL 0x01
-#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, CATB_WDR_EN, 1)
+#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, 0x2c, 1)
#define REG_WDR_OFF 0x00
#define REG_WDR_ON 0x01
#define REG_WDR_AUTO 0x02
-#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, CATB_LIGHT_CTRL, 1)
+#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, 0x40, 1)
#define REG_LIGHT_OFF 0x00
#define REG_LIGHT_ON 0x01
#define REG_LIGHT_AUTO 0x02
-#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, CATB_FLASH_CTRL, 1)
+#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, 0x41, 1)
#define REG_FLASH_OFF 0x00
#define REG_FLASH_ON 0x01
#define REG_FLASH_AUTO 0x02
/*
* Category C - CAPTURE Control
*/
-#define CATC_CAP_MODE 0x00
-#define CATC_CAP_SEL_FRAME 0x06 /* It determines Single or Multi */
-#define CATC_CAP_START 0x09
-#define CATC_CAP_IMAGE_SIZE 0x0d
-#define CATC_CAP_THUMB_SIZE 0x11
-
-#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_MODE, 1)
+#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, 0x00, 1)
#define REG_CAP_NONE 0x00
#define REG_CAP_ANTI_SHAKE 0x02
-#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, CATC_CAP_SEL_FRAME, 1)
+/* Select single- or multi-shot capture */
+#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, 0x06, 1)
-#define CAPC_START I2C_REG(CAT_CAPT_CTRL, CATC_CAP_START, 1)
+#define CAPC_START I2C_REG(CAT_CAPT_CTRL, 0x09, 1)
#define REG_CAP_START_MAIN 0x01
#define REG_CAP_START_THUMB 0x03
-#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4)
-#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4)
+#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, 0x0d, 4)
+#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, 0x11, 4)
/*
* Category F - Flash
*
* This mode provides functions about internal flash stuff and system startup.
*/
-#define CATF_CAM_START 0x12 /* It starts internal ARM core booting
- * after power-up */
-#define FLASH_CAM_START I2C_REG(CAT_FLASH, CATF_CAM_START, 1)
+/* Starts internal ARM core booting after power-up */
+#define FLASH_CAM_START I2C_REG(CAT_FLASH, 0x12, 1)
#define REG_START_ARM_BOOT 0x01
#endif /* M5MOLS_REG_H */
projects / linux-beck.git / commitdiff