cs5535-gpio: apply CS5536 errata workaround for GPIOs

commit 853ff88324a248a9f5da6e110850223db353ec07 upstream.

The AMD Geode CS5536 Companion Device Silicon Revision B1 Specification
Update mentions the follow as issue #36:

 "Atomic write transactions to the atomic GPIO High Bank Feature Bit
  registers should only affect the bits selected [...]"

 "after Suspend, an atomic write transaction [...] will clear all
  non-selected bits of the accessed register."

In other words, writing to the high bank for a single GPIO bit will
clear every other GPIO bit (but only sometimes after a suspend).

The workaround described is obvious and simple; do a read-modify-write.
This patch does that, and documents why we're doing it.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>

diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index e23c06893d19f62195247220075aafce1cfa75c0..599f6c9e0fbf18661d7607407d11b73cd3cda7ff 100644 (file)
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -56,6 +56,18 @@ static struct cs5535_gpio_chip {
  * registers, see include/linux/cs5535.h.
  */
 
+static void errata_outl(u32 val, unsigned long addr)
+{
+       /*
+        * According to the CS5536 errata (#36), after suspend
+        * a write to the high bank GPIO register will clear all
+        * non-selected bits; the recommended workaround is a
+        * read-modify-write operation.
+        */
+       val |= inl(addr);
+       outl(val, addr);
+}
+
 static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
                unsigned int reg)
 {
@@ -64,7 +76,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
                outl(1 << offset, chip->base + reg);
        else
                /* high bank register */
-               outl(1 << (offset - 16), chip->base + 0x80 + reg);
+               errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -86,7 +98,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
                outl(1 << (offset + 16), chip->base + reg);
        else
                /* high bank register */
-               outl(1 << offset, chip->base + 0x80 + reg);
+               errata_outl(1 << offset, chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_clear(unsigned offset, unsigned int reg)