]> git.karo-electronics.de Git - linux-beck.git/commitdiff
[SCSI] lpfc 8.3.12: T10-PI/DIF changes
authorJames Smart <james.smart@emulex.com>
Tue, 6 Apr 2010 18:49:53 +0000 (14:49 -0400)
committerJames Bottomley <James.Bottomley@suse.de>
Sun, 11 Apr 2010 18:45:09 +0000 (13:45 -0500)
Update driver for change in T10-PI interface on adapter
- Remove Profiles.
- Add new SLI Opcodes.
- Add new PDE structures used for BlockGuard.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
drivers/scsi/lpfc/lpfc_hw.h
drivers/scsi/lpfc/lpfc_scsi.c

index 6ba1f307ccce97e6b4a880be356eb6993cb8752b..0cf9a2bd3469de4a08f791e13765357ebd9e6dde 100644 (file)
@@ -1500,7 +1500,6 @@ typedef struct {          /* FireFly BIU registers */
 #define MBXERR_BAD_RCV_LENGTH       14
 #define MBXERR_DMA_ERROR            15
 #define MBXERR_ERROR                16
-#define MBXERR_UNKNOWN_CMD          18
 #define MBXERR_LINK_DOWN            0x33
 #define MBX_NOT_FINISHED           255
 
@@ -1566,95 +1565,83 @@ enum lpfc_protgrp_type {
 };
 
 /* PDE Descriptors */
-#define LPFC_PDE1_DESCRIPTOR           0x81
-#define LPFC_PDE2_DESCRIPTOR           0x82
-#define LPFC_PDE3_DESCRIPTOR           0x83
-
-/* BlockGuard Profiles */
-enum lpfc_bg_prof_codes {
-       LPFC_PROF_INVALID,
-       LPFC_PROF_A1    = 128,  /* Full Protection                            */
-       LPFC_PROF_A2,           /* Disabled Protection Checks:A2~A4           */
-       LPFC_PROF_A3,
-       LPFC_PROF_A4,
-       LPFC_PROF_B1,           /* Embedded DIFs: B1~B3                       */
-       LPFC_PROF_B2,
-       LPFC_PROF_B3,
-       LPFC_PROF_C1,           /* Separate DIFs: C1~C3                       */
-       LPFC_PROF_C2,
-       LPFC_PROF_C3,
-       LPFC_PROF_D1,           /* Full Protection                            */
-       LPFC_PROF_D2,           /* Partial Protection & Check Disabling       */
-       LPFC_PROF_D3,
-       LPFC_PROF_E1,           /* E1~E4:out - check-only, in - update apptag */
-       LPFC_PROF_E2,
-       LPFC_PROF_E3,
-       LPFC_PROF_E4,
-       LPFC_PROF_F1,           /* Full Translation - F1 Prot Descriptor      */
-                               /* F1 Translation BDE                         */
-       LPFC_PROF_ANT1,         /* TCP checksum, DIF inline with data buffers */
-       LPFC_PROF_AST1,         /* TCP checksum, DIF split from data buffer   */
-       LPFC_PROF_ANT2,
-       LPFC_PROF_AST2
+#define LPFC_PDE5_DESCRIPTOR           0x85
+#define LPFC_PDE6_DESCRIPTOR           0x86
+#define LPFC_PDE7_DESCRIPTOR           0x87
+
+/* BlockGuard Opcodes */
+#define BG_OP_IN_NODIF_OUT_CRC         0x0
+#define        BG_OP_IN_CRC_OUT_NODIF          0x1
+#define        BG_OP_IN_NODIF_OUT_CSUM         0x2
+#define        BG_OP_IN_CSUM_OUT_NODIF         0x3
+#define        BG_OP_IN_CRC_OUT_CRC            0x4
+#define        BG_OP_IN_CSUM_OUT_CSUM          0x5
+#define        BG_OP_IN_CRC_OUT_CSUM           0x6
+#define        BG_OP_IN_CSUM_OUT_CRC           0x7
+
+struct lpfc_pde5 {
+       uint32_t word0;
+#define pde5_type_SHIFT                24
+#define pde5_type_MASK         0x000000ff
+#define pde5_type_WORD         word0
+#define pde5_rsvd0_SHIFT       0
+#define pde5_rsvd0_MASK                0x00ffffff
+#define pde5_rsvd0_WORD                word0
+       uint32_t reftag;        /* Reference Tag Value                  */
+       uint32_t reftagtr;      /* Reference Tag Translation Value      */
 };
 
-/* BlockGuard error-control defines */
-#define BG_EC_STOP_ERR                 0x00
-#define BG_EC_CONT_ERR                 0x01
-#define BG_EC_IGN_UNINIT_STOP_ERR      0x10
-#define BG_EC_IGN_UNINIT_CONT_ERR      0x11
-
-/* PDE (Protection Descriptor Entry) word 0 bit masks and shifts */
-#define PDE_DESC_TYPE_MASK             0xff000000
-#define PDE_DESC_TYPE_SHIFT            24
-#define PDE_BG_PROFILE_MASK            0x00ff0000
-#define PDE_BG_PROFILE_SHIFT           16
-#define PDE_BLOCK_LEN_MASK             0x0000fffc
-#define PDE_BLOCK_LEN_SHIFT            2
-#define PDE_ERR_CTRL_MASK              0x00000003
-#define PDE_ERR_CTRL_SHIFT             0
-/* PDE word 1 bit masks and shifts */
-#define PDE_APPTAG_MASK_MASK           0xffff0000
-#define PDE_APPTAG_MASK_SHIFT          16
-#define PDE_APPTAG_VAL_MASK            0x0000ffff
-#define PDE_APPTAG_VAL_SHIFT           0
-struct lpfc_pde {
-       uint32_t parms;     /* bitfields of descriptor, prof, len, and ec */
-       uint32_t apptag;    /* bitfields of app tag maskand app tag value */
-       uint32_t reftag;    /* reference tag occupying all 32 bits        */
+struct lpfc_pde6 {
+       uint32_t word0;
+#define pde6_type_SHIFT                24
+#define pde6_type_MASK         0x000000ff
+#define pde6_type_WORD         word0
+#define pde6_rsvd0_SHIFT       0
+#define pde6_rsvd0_MASK                0x00ffffff
+#define pde6_rsvd0_WORD                word0
+       uint32_t word1;
+#define pde6_rsvd1_SHIFT       26
+#define pde6_rsvd1_MASK                0x0000003f
+#define pde6_rsvd1_WORD                word1
+#define pde6_na_SHIFT          25
+#define pde6_na_MASK           0x00000001
+#define pde6_na_WORD           word1
+#define pde6_rsvd2_SHIFT       16
+#define pde6_rsvd2_MASK                0x000001FF
+#define pde6_rsvd2_WORD                word1
+#define pde6_apptagtr_SHIFT    0
+#define pde6_apptagtr_MASK     0x0000ffff
+#define pde6_apptagtr_WORD     word1
+       uint32_t word2;
+#define pde6_optx_SHIFT                28
+#define pde6_optx_MASK         0x0000000f
+#define pde6_optx_WORD         word2
+#define pde6_oprx_SHIFT                24
+#define pde6_oprx_MASK         0x0000000f
+#define pde6_oprx_WORD         word2
+#define pde6_nr_SHIFT          23
+#define pde6_nr_MASK           0x00000001
+#define pde6_nr_WORD           word2
+#define pde6_ce_SHIFT          22
+#define pde6_ce_MASK           0x00000001
+#define pde6_ce_WORD           word2
+#define pde6_re_SHIFT          21
+#define pde6_re_MASK           0x00000001
+#define pde6_re_WORD           word2
+#define pde6_ae_SHIFT          20
+#define pde6_ae_MASK           0x00000001
+#define pde6_ae_WORD           word2
+#define pde6_ai_SHIFT          19
+#define pde6_ai_MASK           0x00000001
+#define pde6_ai_WORD           word2
+#define pde6_bs_SHIFT          16
+#define pde6_bs_MASK           0x00000007
+#define pde6_bs_WORD           word2
+#define pde6_apptagval_SHIFT   0
+#define pde6_apptagval_MASK    0x0000ffff
+#define pde6_apptagval_WORD    word2
 };
 
-/* inline function to set fields in parms of PDE */
-static inline void
-lpfc_pde_set_bg_parms(struct lpfc_pde *p, u8 desc, u8 prof, u16 len, u8 ec)
-{
-       uint32_t *wp = &p->parms;
-
-       /* spec indicates that adapter appends two 0's to length field */
-       len = len >> 2;
-
-       *wp &= 0;
-       *wp |= ((desc << PDE_DESC_TYPE_SHIFT) & PDE_DESC_TYPE_MASK);
-       *wp |= ((prof << PDE_BG_PROFILE_SHIFT) & PDE_BG_PROFILE_MASK);
-       *wp |= ((len << PDE_BLOCK_LEN_SHIFT) & PDE_BLOCK_LEN_MASK);
-       *wp |= ((ec << PDE_ERR_CTRL_SHIFT) & PDE_ERR_CTRL_MASK);
-       *wp = le32_to_cpu(*wp);
-}
-
-/* inline function to set apptag and reftag fields of PDE */
-static inline void
-lpfc_pde_set_dif_parms(struct lpfc_pde *p, u16 apptagmask, u16 apptagval,
-               u32 reftag)
-{
-       uint32_t *wp = &p->apptag;
-       *wp &= 0;
-       *wp |= ((apptagmask << PDE_APPTAG_MASK_SHIFT) & PDE_APPTAG_MASK_MASK);
-       *wp |= ((apptagval << PDE_APPTAG_VAL_SHIFT) & PDE_APPTAG_VAL_MASK);
-       *wp = le32_to_cpu(*wp);
-       wp = &p->reftag;
-       *wp = le32_to_cpu(reftag);
-}
-
 
 /* Structure for MB Command LOAD_SM and DOWN_LOAD */
 
@@ -2488,8 +2475,8 @@ typedef struct {
 #define  DMP_VPORT_REGION_SIZE  0x200
 #define  DMP_MBOX_OFFSET_WORD   0x5
 
-#define  DMP_REGION_23          0x17   /* fcoe param  and port state region */
-#define  DMP_RGN23_SIZE                 0x400
+#define  DMP_REGION_23          0x17   /* fcoe param  and port state region */
+#define  DMP_RGN23_SIZE                 0x400
 
 #define  WAKE_UP_PARMS_REGION_ID    4
 #define  WAKE_UP_PARMS_WORD_SIZE   15
@@ -2504,9 +2491,9 @@ struct vport_rec {
 #define VPORT_INFO_REV 0x1
 #define MAX_STATIC_VPORT_COUNT 16
 struct static_vport_info {
-       uint32_t                signature;
+       uint32_t                signature;
        uint32_t                rev;
-       struct vport_rec        vport_list[MAX_STATIC_VPORT_COUNT];
+       struct vport_rec        vport_list[MAX_STATIC_VPORT_COUNT];
        uint32_t                resvd[66];
 };
 
index dccdb822328c2233ff72c89393acb663f53fc568..f4a3b2e79eeab75a6009ad9a2f33b39cde6617ec 100644 (file)
@@ -1141,37 +1141,47 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 }
 
 /*
- * Given a scsi cmnd, determine the BlockGuard profile to be used
- * with the cmd
+ * Given a scsi cmnd, determine the BlockGuard opcodes to be used with it
+ * @sc: The SCSI command to examine
+ * @txopt: (out) BlockGuard operation for transmitted data
+ * @rxopt: (out) BlockGuard operation for received data
+ *
+ * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
+ *
  */
 static int
-lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc)
+lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+               uint8_t *txop, uint8_t *rxop)
 {
        uint8_t guard_type = scsi_host_get_guard(sc->device->host);
-       uint8_t ret_prof = LPFC_PROF_INVALID;
+       uint8_t ret = 0;
 
        if (guard_type == SHOST_DIX_GUARD_IP) {
                switch (scsi_get_prot_op(sc)) {
                case SCSI_PROT_READ_INSERT:
                case SCSI_PROT_WRITE_STRIP:
-                       ret_prof = LPFC_PROF_AST2;
+                       *txop = BG_OP_IN_CSUM_OUT_NODIF;
+                       *rxop = BG_OP_IN_NODIF_OUT_CSUM;
                        break;
 
                case SCSI_PROT_READ_STRIP:
                case SCSI_PROT_WRITE_INSERT:
-                       ret_prof = LPFC_PROF_A1;
+                       *txop = BG_OP_IN_NODIF_OUT_CRC;
+                       *rxop = BG_OP_IN_CRC_OUT_NODIF;
                        break;
 
                case SCSI_PROT_READ_PASS:
                case SCSI_PROT_WRITE_PASS:
-                       ret_prof = LPFC_PROF_AST1;
+                       *txop = BG_OP_IN_CSUM_OUT_CRC;
+                       *rxop = BG_OP_IN_CRC_OUT_CSUM;
                        break;
 
                case SCSI_PROT_NORMAL:
                default:
                        lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-                               "9063 BLKGRD:Bad op/guard:%d/%d combination\n",
+                               "9063 BLKGRD: Bad op/guard:%d/%d combination\n",
                                        scsi_get_prot_op(sc), guard_type);
+                       ret = 1;
                        break;
 
                }
@@ -1179,12 +1189,14 @@ lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc)
                switch (scsi_get_prot_op(sc)) {
                case SCSI_PROT_READ_STRIP:
                case SCSI_PROT_WRITE_INSERT:
-                       ret_prof = LPFC_PROF_A1;
+                       *txop = BG_OP_IN_NODIF_OUT_CRC;
+                       *rxop = BG_OP_IN_CRC_OUT_NODIF;
                        break;
 
                case SCSI_PROT_READ_PASS:
                case SCSI_PROT_WRITE_PASS:
-                       ret_prof = LPFC_PROF_C1;
+                       *txop = BG_OP_IN_CRC_OUT_CRC;
+                       *rxop = BG_OP_IN_CRC_OUT_CRC;
                        break;
 
                case SCSI_PROT_READ_INSERT:
@@ -1194,6 +1206,7 @@ lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc)
                        lpfc_printf_log(phba, KERN_ERR, LOG_BG,
                                "9075 BLKGRD: Bad op/guard:%d/%d combination\n",
                                        scsi_get_prot_op(sc), guard_type);
+                       ret = 1;
                        break;
                }
        } else {
@@ -1201,7 +1214,7 @@ lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc)
                BUG();
        }
 
-       return ret_prof;
+       return ret;
 }
 
 struct scsi_dif_tuple {
@@ -1266,7 +1279,9 @@ lpfc_get_cmd_dif_parms(struct scsi_cmnd *sc, uint16_t *apptagmask,
  * The buffer list consists of just one protection group described
  * below:
  *                                +-------------------------+
- *   start of prot group  -->     |          PDE_1          |
+ *   start of prot group  -->     |          PDE_5          |
+ *                                +-------------------------+
+ *                                |          PDE_6          |
  *                                +-------------------------+
  *                                |         Data BDE        |
  *                                +-------------------------+
@@ -1284,30 +1299,49 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
                struct ulp_bde64 *bpl, int datasegcnt)
 {
        struct scatterlist *sgde = NULL; /* s/g data entry */
-       struct lpfc_pde *pde1 = NULL;
+       struct lpfc_pde5 *pde5 = NULL;
+       struct lpfc_pde6 *pde6 = NULL;
        dma_addr_t physaddr;
-       int i = 0, num_bde = 0;
+       int i = 0, num_bde = 0, status;
        int datadir = sc->sc_data_direction;
-       int prof = LPFC_PROF_INVALID;
        unsigned blksize;
        uint32_t reftag;
        uint16_t apptagmask, apptagval;
+       uint8_t txop, rxop;
 
-       pde1 = (struct lpfc_pde *) bpl;
-       prof = lpfc_sc_to_sli_prof(phba, sc);
-
-       if (prof == LPFC_PROF_INVALID)
+       status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+       if (status)
                goto out;
 
-       /* extract some info from the scsi command for PDE1*/
+       /* extract some info from the scsi command for pde*/
        blksize = lpfc_cmd_blksize(sc);
        lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);
 
-       /* setup PDE1 with what we have */
-       lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
-                       BG_EC_STOP_ERR);
-       lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);
+       /* setup PDE5 with what we have */
+       pde5 = (struct lpfc_pde5 *) bpl;
+       memset(pde5, 0, sizeof(struct lpfc_pde5));
+       bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
+       pde5->reftag = reftag;
 
+       /* advance bpl and increment bde count */
+       num_bde++;
+       bpl++;
+       pde6 = (struct lpfc_pde6 *) bpl;
+
+       /* setup PDE6 with the rest of the info */
+       memset(pde6, 0, sizeof(struct lpfc_pde6));
+       bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
+       bf_set(pde6_optx, pde6, txop);
+       bf_set(pde6_oprx, pde6, rxop);
+       if (datadir == DMA_FROM_DEVICE) {
+               bf_set(pde6_ce, pde6, 1);
+               bf_set(pde6_re, pde6, 1);
+               bf_set(pde6_ae, pde6, 1);
+       }
+       bf_set(pde6_ai, pde6, 1);
+       bf_set(pde6_apptagval, pde6, apptagval);
+
+       /* advance bpl and increment bde count */
        num_bde++;
        bpl++;
 
@@ -1342,15 +1376,17 @@ out:
  * The buffer list for this type consists of one or more of the
  * protection groups described below:
  *                                    +-------------------------+
- *   start of first prot group  -->   |          PDE_1          |
+ *   start of first prot group  -->   |          PDE_5          |
+ *                                    +-------------------------+
+ *                                    |          PDE_6          |
  *                                    +-------------------------+
- *                                    |      PDE_3 (Prot BDE)   |
+ *                                    |      PDE_7 (Prot BDE)   |
  *                                    +-------------------------+
  *                                    |        Data BDE         |
  *                                    +-------------------------+
  *                                    |more Data BDE's ... (opt)|
  *                                    +-------------------------+
- *   start of new  prot group  -->    |          PDE_1          |
+ *   start of new  prot group  -->    |          PDE_5          |
  *                                    +-------------------------+
  *                                    |          ...            |
  *                                    +-------------------------+
@@ -1369,19 +1405,21 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 {
        struct scatterlist *sgde = NULL; /* s/g data entry */
        struct scatterlist *sgpe = NULL; /* s/g prot entry */
-       struct lpfc_pde *pde1 = NULL;
+       struct lpfc_pde5 *pde5 = NULL;
+       struct lpfc_pde6 *pde6 = NULL;
        struct ulp_bde64 *prot_bde = NULL;
        dma_addr_t dataphysaddr, protphysaddr;
        unsigned short curr_data = 0, curr_prot = 0;
        unsigned int split_offset, protgroup_len;
        unsigned int protgrp_blks, protgrp_bytes;
        unsigned int remainder, subtotal;
-       int prof = LPFC_PROF_INVALID;
+       int status;
        int datadir = sc->sc_data_direction;
        unsigned char pgdone = 0, alldone = 0;
        unsigned blksize;
        uint32_t reftag;
        uint16_t apptagmask, apptagval;
+       uint8_t txop, rxop;
        int num_bde = 0;
 
        sgpe = scsi_prot_sglist(sc);
@@ -1394,31 +1432,47 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
                return 0;
        }
 
-       prof = lpfc_sc_to_sli_prof(phba, sc);
-       if (prof == LPFC_PROF_INVALID)
+       status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+       if (status)
                goto out;
 
-       /* extract some info from the scsi command for PDE1*/
+       /* extract some info from the scsi command */
        blksize = lpfc_cmd_blksize(sc);
        lpfc_get_cmd_dif_parms(sc, &apptagmask, &apptagval, &reftag);
 
        split_offset = 0;
        do {
-               /* setup the first PDE_1 */
-               pde1 = (struct lpfc_pde *) bpl;
-
-               lpfc_pde_set_bg_parms(pde1, LPFC_PDE1_DESCRIPTOR, prof, blksize,
-                               BG_EC_STOP_ERR);
-               lpfc_pde_set_dif_parms(pde1, apptagmask, apptagval, reftag);
+               /* setup PDE5 with what we have */
+               pde5 = (struct lpfc_pde5 *) bpl;
+               memset(pde5, 0, sizeof(struct lpfc_pde5));
+               bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
+               pde5->reftag = reftag;
 
+               /* advance bpl and increment bde count */
+               num_bde++;
+               bpl++;
+               pde6 = (struct lpfc_pde6 *) bpl;
+
+               /* setup PDE6 with the rest of the info */
+               memset(pde6, 0, sizeof(struct lpfc_pde6));
+               bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
+               bf_set(pde6_optx, pde6, txop);
+               bf_set(pde6_oprx, pde6, rxop);
+               bf_set(pde6_ce, pde6, 1);
+               bf_set(pde6_re, pde6, 1);
+               bf_set(pde6_ae, pde6, 1);
+               bf_set(pde6_ai, pde6, 1);
+               bf_set(pde6_apptagval, pde6, apptagval);
+
+               /* advance bpl and increment bde count */
                num_bde++;
                bpl++;
 
                /* setup the first BDE that points to protection buffer */
                prot_bde = (struct ulp_bde64 *) bpl;
                protphysaddr = sg_dma_address(sgpe);
-               prot_bde->addrLow = le32_to_cpu(putPaddrLow(protphysaddr));
-               prot_bde->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr));
+               prot_bde->addrHigh = le32_to_cpu(putPaddrLow(protphysaddr));
+               prot_bde->addrLow = le32_to_cpu(putPaddrHigh(protphysaddr));
                protgroup_len = sg_dma_len(sgpe);
 
 
@@ -1429,10 +1483,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
                protgrp_bytes = protgrp_blks * blksize;
 
                prot_bde->tus.f.bdeSize = protgroup_len;
-               if (datadir == DMA_TO_DEVICE)
-                       prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
-               else
-                       prot_bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+               prot_bde->tus.f.bdeFlags = LPFC_PDE7_DESCRIPTOR;
                prot_bde->tus.w = le32_to_cpu(bpl->tus.w);
 
                curr_prot++;
@@ -1484,6 +1535,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
                        /* Move to the next s/g segment if possible */
                        sgde = sg_next(sgde);
+
                }
 
                /* are we done ? */
@@ -1506,7 +1558,6 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 out:
 
-
        return num_bde;
 }
 /*
@@ -1828,8 +1879,8 @@ out:
  * field of @lpfc_cmd for device with SLI-4 interface spec.
  *
  * Return codes:
- *     1 - Error
- *     0 - Success
+ *     1 - Error
+ *     0 - Success
  **/
 static int
 lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
@@ -1937,8 +1988,8 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
  * lpfc_hba struct.
  *
  * Return codes:
- *     1 - Error
- *     0 - Success
+ *     1 - Error
+ *     0 - Success
  **/
 static inline int
 lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)