ARM: dts: imx27-phytec-phycore-som: Using labels for reusing UART, I2C and FEC

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index bd7df2ea10773a516499b5b8aa31de50675a0339..22d0d272be7a8cb133566a7c8d22fe5119687b06 100644 (file)
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -19,39 +19,6 @@
        memory {
                reg = <0xa0000000 0x08000000>;
        };
-
-       soc {
-               aipi@10000000 { /* aipi1 */
-                       serial@1000a000 {
-                               status = "okay";
-                       };
-
-                       i2c@1001d000 {
-                               clock-frequency = <400000>;
-                               status = "okay";
-                               at24@52 {
-                                       compatible = "at,24c32";
-                                       pagesize = <32>;
-                                       reg = <0x52>;
-                               };
-                               pcf8563@51 {
-                                       compatible = "nxp,pcf8563";
-                                       reg = <0x51>;
-                               };
-                               lm75@4a {
-                                       compatible = "national,lm75";
-                                       reg = <0x4a>;
-                               };
-                       };
-               };
-
-               aipi@10020000 { /* aipi2 */
-                       ethernet@1002b000 {
-                               phy-reset-gpios = <&gpio3 30 0>;
-                               status = "okay";
-                       };
-               };
-       };
 };
 
 &cspi1 {
@@ -163,12 +130,42 @@
        };
 };
 
+&fec {
+       phy-reset-gpios = <&gpio3 30 0>;
+       status = "okay";
+};
+
+&i2c2 {
+       clock-frequency = <400000>;
+       status = "okay";
+
+       at24@52 {
+               compatible = "at,24c32";
+               pagesize = <32>;
+               reg = <0x52>;
+       };
+
+       pcf8563@51 {
+               compatible = "nxp,pcf8563";
+               reg = <0x51>;
+       };
+
+       lm75@4a {
+               compatible = "national,lm75";
+               reg = <0x4a>;
+       };
+};
+
 &nfc {
        nand-bus-width = <8>;
        nand-ecc-mode = "hw";
        status = "okay";
 };
 
+&uart1 {
+       status = "okay";
+};
+
 &weim {
        status = "okay";