ARM: dts: imx7d-sdb: Add Wifi support

imx7d-sdb has a BCM4339 Wifi chip connected to USDHC2.

Add support for it.

While at it, move the WL_REG_ON pin to the correct pinctrl node.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 291f556029f6c966700e7714ebe951184618938d..52e40c1d8d40d25676400341288c636c3db63ecb 100644 (file)
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -105,6 +105,18 @@
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <1800000>;
        };
+
+       reg_brcm: regulator-brcm {
+               compatible = "regulator-fixed";
+               gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-name = "brcm_reg";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_brcm_reg>;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <200000>;
+       };
 };
 
 &adc1 {
@@ -379,6 +391,19 @@
        status = "okay";
 };
 
+&usdhc2 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+       pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+       wakeup-source;
+       keep-power-in-suspend;
+       non-removable;
+       vmmc-supply = <&reg_brcm>;
+       fsl,tuning-step = <2>;
+       status = "okay";
+};
+
 &usdhc3 {
        pinctrl-names = "default", "state_100mhz", "state_200mhz";
        pinctrl-0 = <&pinctrl_usdhc3>;
@@ -403,6 +428,12 @@
        pinctrl-0 = <&pinctrl_hog>;
 
        imx7d-sdb {
+               pinctrl_brcm_reg: brcmreggrp {
+                       fsl,pins = <
+                               MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21        0x14
+                       >;
+               };
+
                pinctrl_ecspi3: ecspi3grp {
                        fsl,pins = <
                                MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO      0x2
@@ -570,7 +601,6 @@
                                MX7D_PAD_SD2_DATA1__SD2_DATA1           0x59
                                MX7D_PAD_SD2_DATA2__SD2_DATA2           0x59
                                MX7D_PAD_SD2_DATA3__SD2_DATA3           0x59
-                               MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21        0x59 /* WL_REG_ON */
                        >;
                };