ARM: cns3xxx: Use IO memory accessors everywhere

Before it isn't too late let's switch to IO memory accessors.
This patch converts all current _REG users and _REG definitions.
There should be no functional changes.

Suggested-by: Ben Dooks <ben-linux@fluff.org>
Suggested-by: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>

diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 8a2f5a21d4ee3ab63843b6311606d55aaa298352..6dbce13771ca49c83c89dde5b4f0b6f734e20c1f 100644 (file)
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -247,37 +247,36 @@
  * Misc block
  */
 #define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset))))
-
-#define MISC_MEMORY_REMAP_REG                  MISC_MEM_MAP_VALUE(0x00)
-#define MISC_CHIP_CONFIG_REG                   MISC_MEM_MAP_VALUE(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG              MISC_MEM_MAP_VALUE(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG         MISC_MEM_MAP_VALUE(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG         MISC_MEM_MAP_VALUE(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG              MISC_MEM_MAP_VALUE(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG              MISC_MEM_MAP_VALUE(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A      MISC_MEM_MAP_VALUE(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B      MISC_MEM_MAP_VALUE(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG          MISC_MEM_MAP_VALUE(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG         MISC_MEM_MAP_VALUE(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG          MISC_MEM_MAP_VALUE(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG         MISC_MEM_MAP_VALUE(0x30)
-#define MISC_IO_PULL_CTRL_REG                  MISC_MEM_MAP_VALUE(0x34)
-#define MISC_E_FUSE_31_0_REG                   MISC_MEM_MAP_VALUE(0x40)
-#define MISC_E_FUSE_63_32_REG                  MISC_MEM_MAP_VALUE(0x44)
-#define MISC_E_FUSE_95_64_REG                  MISC_MEM_MAP_VALUE(0x48)
-#define MISC_E_FUSE_127_96_REG                 MISC_MEM_MAP_VALUE(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG               MISC_MEM_MAP_VALUE(0x50)
-#define MISC_SOFTWARE_TEST_2_REG               MISC_MEM_MAP_VALUE(0x54)
-
-#define MISC_SATA_POWER_MODE                   MISC_MEM_MAP_VALUE(0x310)
-
-#define MISC_USB_CFG_REG                       MISC_MEM_MAP_VALUE(0x800)
-#define MISC_USB_STS_REG                       MISC_MEM_MAP_VALUE(0x804)
-#define MISC_USBPHY00_CFG_REG                  MISC_MEM_MAP_VALUE(0x808)
-#define MISC_USBPHY01_CFG_REG                  MISC_MEM_MAP_VALUE(0x80c)
-#define MISC_USBPHY10_CFG_REG                  MISC_MEM_MAP_VALUE(0x810)
-#define MISC_USBPHY11_CFG_REG                  MISC_MEM_MAP_VALUE(0x814)
+
+#define MISC_MEMORY_REMAP_REG                  MISC_MEM_MAP(0x00)
+#define MISC_CHIP_CONFIG_REG                   MISC_MEM_MAP(0x04)
+#define MISC_DEBUG_PROBE_DATA_REG              MISC_MEM_MAP(0x08)
+#define MISC_DEBUG_PROBE_SELECTION_REG         MISC_MEM_MAP(0x0C)
+#define MISC_IO_PIN_FUNC_SELECTION_REG         MISC_MEM_MAP(0x10)
+#define MISC_GPIOA_PIN_ENABLE_REG              MISC_MEM_MAP(0x14)
+#define MISC_GPIOB_PIN_ENABLE_REG              MISC_MEM_MAP(0x18)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A      MISC_MEM_MAP(0x1C)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B      MISC_MEM_MAP(0x20)
+#define MISC_GPIOA_15_0_PULL_CTRL_REG          MISC_MEM_MAP(0x24)
+#define MISC_GPIOA_16_31_PULL_CTRL_REG         MISC_MEM_MAP(0x28)
+#define MISC_GPIOB_15_0_PULL_CTRL_REG          MISC_MEM_MAP(0x2C)
+#define MISC_GPIOB_16_31_PULL_CTRL_REG         MISC_MEM_MAP(0x30)
+#define MISC_IO_PULL_CTRL_REG                  MISC_MEM_MAP(0x34)
+#define MISC_E_FUSE_31_0_REG                   MISC_MEM_MAP(0x40)
+#define MISC_E_FUSE_63_32_REG                  MISC_MEM_MAP(0x44)
+#define MISC_E_FUSE_95_64_REG                  MISC_MEM_MAP(0x48)
+#define MISC_E_FUSE_127_96_REG                 MISC_MEM_MAP(0x4C)
+#define MISC_SOFTWARE_TEST_1_REG               MISC_MEM_MAP(0x50)
+#define MISC_SOFTWARE_TEST_2_REG               MISC_MEM_MAP(0x54)
+
+#define MISC_SATA_POWER_MODE                   MISC_MEM_MAP(0x310)
+
+#define MISC_USB_CFG_REG                       MISC_MEM_MAP(0x800)
+#define MISC_USB_STS_REG                       MISC_MEM_MAP(0x804)
+#define MISC_USBPHY00_CFG_REG                  MISC_MEM_MAP(0x808)
+#define MISC_USBPHY01_CFG_REG                  MISC_MEM_MAP(0x80c)
+#define MISC_USBPHY10_CFG_REG                  MISC_MEM_MAP(0x810)
+#define MISC_USBPHY11_CFG_REG                  MISC_MEM_MAP(0x814)
 
 #define MISC_PCIEPHY_CMCTL(x)                  MISC_MEM_MAP(0x900 + (x) * 0x004)
 #define MISC_PCIEPHY_CTL(x)                    MISC_MEM_MAP(0x940 + (x) * 0x100)
@@ -300,21 +299,21 @@
 /*
  * Power management and clock control
  */
-#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset))))
-
-#define PM_CLK_GATE_REG                                        PMU_REG_VALUE(0x000)
-#define PM_SOFT_RST_REG                                        PMU_REG_VALUE(0x004)
-#define PM_HS_CFG_REG                                  PMU_REG_VALUE(0x008)
-#define PM_CACTIVE_STA_REG                             PMU_REG_VALUE(0x00C)
-#define PM_PWR_STA_REG                                 PMU_REG_VALUE(0x010)
-#define PM_CLK_CTRL_REG                                        PMU_REG_VALUE(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG                                PMU_REG_VALUE(0x018)
-#define PM_PLL_HM_PD_CTRL_REG                          PMU_REG_VALUE(0x01C)
-#define PM_REGULAT_CTRL_REG                            PMU_REG_VALUE(0x020)
-#define PM_WDT_CTRL_REG                                        PMU_REG_VALUE(0x024)
-#define PM_WU_CTRL0_REG                                        PMU_REG_VALUE(0x028)
-#define PM_WU_CTRL1_REG                                        PMU_REG_VALUE(0x02C)
-#define PM_CSR_REG                                     PMU_REG_VALUE(0x030)
+#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
+
+#define PM_CLK_GATE_REG                                        PMU_MEM_MAP(0x000)
+#define PM_SOFT_RST_REG                                        PMU_MEM_MAP(0x004)
+#define PM_HS_CFG_REG                                  PMU_MEM_MAP(0x008)
+#define PM_CACTIVE_STA_REG                             PMU_MEM_MAP(0x00C)
+#define PM_PWR_STA_REG                                 PMU_MEM_MAP(0x010)
+#define PM_CLK_CTRL_REG                                        PMU_MEM_MAP(0x014)
+#define PM_PLL_LCD_I2S_CTRL_REG                                PMU_MEM_MAP(0x018)
+#define PM_PLL_HM_PD_CTRL_REG                          PMU_MEM_MAP(0x01C)
+#define PM_REGULAT_CTRL_REG                            PMU_MEM_MAP(0x020)
+#define PM_WDT_CTRL_REG                                        PMU_MEM_MAP(0x024)
+#define PM_WU_CTRL0_REG                                        PMU_MEM_MAP(0x028)
+#define PM_WU_CTRL1_REG                                        PMU_MEM_MAP(0x02C)
+#define PM_CSR_REG                                     PMU_MEM_MAP(0x030)
 
 /* PM_CLK_GATE_REG */
 #define PM_CLK_GATE_REG_OFFSET_SDIO                    (25)

diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 725e1a4fc23103ecd01df12eea9483d3f81a42f3..38e44706feabf43a69a9a3429f3a6753b51d34a0 100644 (file)
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,18 +6,25 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/system.h>
 #include <mach/cns3xxx.h>
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
-       PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK);
+       u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+       reg |= (block & PM_CLK_GATE_REG_MASK);
+       __raw_writel(reg, PM_CLK_GATE_REG);
 }
 
 void cns3xxx_pwr_power_up(unsigned int block)
 {
-       PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL);
+       u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
+       reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
+       __raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 
        /* Wait for 300us for the PLL output clock locked. */
        udelay(300);
@@ -25,22 +32,29 @@ void cns3xxx_pwr_power_up(unsigned int block)
 
 void cns3xxx_pwr_power_down(unsigned int block)
 {
+       u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
        /* write '1' to power down */
-       PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL);
+       reg |= (block & CNS3XXX_PWR_PLL_ALL);
+       __raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 };
 
 static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 {
+       u32 reg = __raw_readl(PM_SOFT_RST_REG);
+
        /*
         * bit 0, 28, 29 => program low to reset,
         * the other else program low and then high
         */
        if (block & 0x30000001) {
-               PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+               reg &= ~(block & PM_SOFT_RST_REG_MASK);
        } else {
-               PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
-               PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK);
+               reg &= ~(block & PM_SOFT_RST_REG_MASK);
+               reg |= (block & PM_SOFT_RST_REG_MASK);
        }
+
+       __raw_writel(reg, PM_SOFT_RST_REG);
 }
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
@@ -73,12 +87,13 @@ void arch_reset(char mode, const char *cmd)
  */
 int cns3xxx_cpu_clock(void)
 {
+       u32 reg = __raw_readl(PM_CLK_CTRL_REG);
        int cpu;
        int cpu_sel;
        int div_sel;
 
-       cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-       div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
+       cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
+       div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
 
        cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;