obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
+obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
--- /dev/null
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dreamplug.c
+ *
+ * Marvell DreamPlug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition dreamplug_partitions[] = {
+ {
+ .name = "u-boot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ {
+ .name = "u-boot env",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_512K,
+ },
+ {
+ .name = "dtb",
+ .size = SZ_64K,
+ .offset = SZ_512K + SZ_512K + SZ_512K,
+ },
+};
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+ .type = "mx25l1606e",
+ .name = "spi_flash",
+ .parts = dreamplug_partitions,
+ .nr_parts = ARRAY_SIZE(dreamplug_partitions),
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &dreamplug_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data dreamplug_sata_data = {
+ .n_ports = 1,
+};
+
+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
+ /* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+ {
+ .name = "dreamplug:blue:bluetooth",
+ .gpio = 47,
+ .active_low = 1,
+ },
+ {
+ .name = "dreamplug:green:wifi",
+ .gpio = 48,
+ .active_low = 1,
+ },
+ {
+ .name = "dreamplug:green:wifi_ap",
+ .gpio = 49,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+ .leds = dreamplug_led_pins,
+ .num_leds = ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static struct platform_device dreamplug_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &dreamplug_led_data,
+ }
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP47_GPIO, /* Bluetooth LED */
+ MPP48_GPIO, /* Wifi LED */
+ MPP49_GPIO, /* Wifi AP LED */
+ 0
+};
+
+void __init dreamplug_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_mpp_conf(dreamplug_mpp_config);
+
+ spi_register_board_info(dreamplug_spi_slave_info,
+ ARRAY_SIZE(dreamplug_spi_slave_info));
+ kirkwood_spi_init();
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&dreamplug_ge00_data);
+ kirkwood_ge01_init(&dreamplug_ge01_data);
+ kirkwood_sata_init(&dreamplug_sata_data);
+ kirkwood_sdio_init(&dreamplug_mvsdio_data);
+
+ platform_device_register(&dreamplug_leds);
+}
*
* arch/arm/mach-kirkwood/board-dt.c
*
- * Marvell DreamPlug Reference Board Setup
+ * Flattened Device Tree board initialization
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
#include "common.h"
-#include "mpp.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{ }
};
-struct mtd_partition dreamplug_partitions[] = {
- {
- .name = "u-boot",
- .size = SZ_512K,
- .offset = 0,
- },
- {
- .name = "u-boot env",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K,
- },
- {
- .name = "dtb",
- .size = SZ_64K,
- .offset = SZ_512K + SZ_512K + SZ_512K,
- },
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
- .type = "mx25l1606e",
- .name = "spi_flash",
- .parts = dreamplug_partitions,
- .nr_parts = ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &dreamplug_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 50000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data dreamplug_sata_data = {
- .n_ports = 1,
-};
-
-static struct mvsdio_platform_data dreamplug_mvsdio_data = {
- /* unfortunately the CD signal has not been connected */
-};
-
-static struct gpio_led dreamplug_led_pins[] = {
- {
- .name = "dreamplug:blue:bluetooth",
- .gpio = 47,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi",
- .gpio = 48,
- .active_low = 1,
- },
- {
- .name = "dreamplug:green:wifi_ap",
- .gpio = 49,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data dreamplug_led_data = {
- .leds = dreamplug_led_pins,
- .num_leds = ARRAY_SIZE(dreamplug_led_pins),
-};
-
-static struct platform_device dreamplug_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &dreamplug_led_data,
- }
-};
-
-static unsigned int dreamplug_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP47_GPIO, /* Bluetooth LED */
- MPP48_GPIO, /* Wifi LED */
- MPP49_GPIO, /* Wifi AP LED */
- 0
-};
-
-static void __init dreamplug_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_mpp_conf(dreamplug_mpp_config);
-
- spi_register_board_info(dreamplug_spi_slave_info,
- ARRAY_SIZE(dreamplug_spi_slave_info));
- kirkwood_spi_init();
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&dreamplug_ge00_data);
- kirkwood_ge01_init(&dreamplug_ge01_data);
- kirkwood_sata_init(&dreamplug_sata_data);
- kirkwood_sdio_init(&dreamplug_mvsdio_data);
-
- platform_device_register(&dreamplug_leds);
-}
-
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_DREAMPLUG_DT
+void dreamplug_init(void);
+#else
+static inline void dreamplug_init(void) {};
+#endif
+
+/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
void kirkwood_rtc_init(void);
projects / mv-sheeva.git / commitdiff