arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions

USB2513B HUB reset line is connected to PMIC GPIO 3 not to GPIO 1.
TC7USB40MU Dual SPDT Switch select input line is connected to PMIC
GPIO 4 not to GPIO 2. Fix this. Remove unused LED nodes.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index f64903fa3a05d3e734e060407ddb2add62cadf6c..26c2cf7940fb8ea6861c48ae5cea001884c24229 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -42,7 +42,7 @@
                pinconf {
                        pins = "mpp2", "mpp3";
                        function = PMIC_GPIO_FUNC_NORMAL;
-                       output-low;
+                       input-disable;
                };
        };
 };

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 2790e28d2485b1c9024dccca6d06b71a5b57b021..30e68251defb5fcd9c93825c1d9dd6c871a0a46c 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -133,7 +133,7 @@
 
        usb2513 {
                compatible = "smsc,usb3503";
-               reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>;
+               reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
                initial-mode = <1>;
        };
 
@@ -274,4 +274,4 @@
                        sound-dai = <&adv_bridge 0>;
                };
        };
-};
\ No newline at end of file
+};