ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbers

The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 8ec69612a12beed096cda98910d10630469d1353..aafa99b1d4bf6b91e0b67d72716711f850ee40d3 100644 (file)
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -584,7 +584,7 @@ static struct regulator_init_data vcc_sdhi0_init_data = {
 static struct fixed_voltage_config vcc_sdhi0_info = {
        .supply_name = "SDHI0 Vcc",
        .microvolts = 3300000,
-       .gpio = GPIO_PORT75,
+       .gpio = 75,
        .enable_high = 1,
        .init_data = &vcc_sdhi0_init_data,
 };
@@ -615,7 +615,7 @@ static struct regulator_init_data vccq_sdhi0_init_data = {
 };
 
 static struct gpio vccq_sdhi0_gpios[] = {
-       {GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
+       {17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
 };
 
 static struct gpio_regulator_state vccq_sdhi0_states[] = {
@@ -626,7 +626,7 @@ static struct gpio_regulator_state vccq_sdhi0_states[] = {
 static struct gpio_regulator_config vccq_sdhi0_info = {
        .supply_name = "vqmmc",
 
-       .enable_gpio = GPIO_PORT74,
+       .enable_gpio = 74,
        .enable_high = 1,
        .enabled_at_boot = 0,
 
@@ -664,7 +664,7 @@ static struct regulator_init_data vcc_sdhi1_init_data = {
 static struct fixed_voltage_config vcc_sdhi1_info = {
        .supply_name = "SDHI1 Vcc",
        .microvolts = 3300000,
-       .gpio = GPIO_PORT16,
+       .gpio = 16,
        .enable_high = 1,
        .init_data = &vcc_sdhi1_init_data,
 };
@@ -693,7 +693,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
        .tmio_caps      = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
                          MMC_CAP_POWER_OFF_CARD,
        .tmio_flags     = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-       .cd_gpio        = GPIO_PORT167,
+       .cd_gpio        = 167,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -736,7 +736,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
                          MMC_CAP_POWER_OFF_CARD,
        .tmio_flags     = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
        /* Port72 cannot generate IRQs, will be used in polling mode. */
-       .cd_gpio        = GPIO_PORT72,
+       .cd_gpio        = 72,
 };
 
 static struct resource sdhi1_resources[] = {