arm64: dts: qcom: Add 8x16 chipset SPMI PMIC's nodes

PM9816 has 2 SPMI devices per physical package. Add PMIC configuration
nodes including sub-function device nodes and include them in boards,
which are using 8x16 based chipset.

PM9816 sub-function devices include:

* GPIO block, with 4 pins
* MPP block, with 4 pins
* Volatage ADC (VADC), with multiple inputs
* Thermal sensor device, which is using on chip VADC
  channel report PMIC die temperature.
* Power key device, which is responsible for clean system
  reboot or shutdown
* RTC device

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 703a4f16e711ab7da3e206c6e2be92497533118a..58f0055f72a5e96f9f9c99507c0498c442622a75 100644 (file)
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "msm8916.dtsi"
+#include "pm8916.dtsi"
 
 / {
        aliases {

diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index bea871b0df1367e6e58af81d6cbfbd42687993d1..a1aa0b201e926a493c624a69c5695946bafb3ff0 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -12,6 +12,7 @@
  */
 
 #include "msm8916.dtsi"
+#include "pm8916.dtsi"
 
 / {
        aliases {

diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
new file mode 100644 (file)
index 0000000..b222ece
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -0,0 +1,99 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+       usid0: pm8916@0 {
+               compatible = "qcom,spmi-pmic";
+               reg = <0x0 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               rtc@6000 {
+                       compatible = "qcom,pm8941-rtc";
+                       reg = <0x6000 0x6100>;
+                       reg-names = "rtc", "alarm";
+                       interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+               };
+
+               pwrkey@800 {
+                       compatible = "qcom,pm8941-pwrkey";
+                       reg = <0x800>;
+                       interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                       debounce = <15625>;
+                       bias-pull-up;
+               };
+
+               pm8916_gpios: gpios@c000 {
+                       compatible = "qcom,pm8916-gpio";
+                       reg = <0xc000 0x400>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+                                    <0 0xc1 0 IRQ_TYPE_NONE>,
+                                    <0 0xc2 0 IRQ_TYPE_NONE>,
+                                    <0 0xc3 0 IRQ_TYPE_NONE>;
+               };
+
+               pm8916_mpps: mpps@a000 {
+                       compatible = "qcom,pm8916-mpp";
+                       reg = <0xa000 0x400>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+                                    <0 0xa1 0 IRQ_TYPE_NONE>,
+                                    <0 0xa2 0 IRQ_TYPE_NONE>,
+                                    <0 0xa3 0 IRQ_TYPE_NONE>;
+               };
+
+               pm8916_temp: temp-alarm@2400 {
+                       compatible = "qcom,spmi-temp-alarm";
+                       reg = <0x2400 0x100>;
+                       interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+                       io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+                       io-channel-names = "thermal";
+                       #thermal-sensor-cells = <0>;
+               };
+
+               pm8916_vadc: vadc@3100 {
+                       compatible = "qcom,spmi-vadc";
+                       reg = <0x3100 0x100>;
+                       interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #io-channel-cells = <1>;
+
+                       usb_in {
+                               reg = <VADC_USBIN>;
+                               qcom,pre-scaling = <1 10>;
+                       };
+                       vph_pwr {
+                               reg = <VADC_VSYS>;
+                               qcom,pre-scaling = <1 3>;
+                       };
+                       die_temp {
+                               reg = <VADC_DIE_TEMP>;
+                       };
+                       ref_625mv {
+                               reg = <VADC_REF_625MV>;
+                       };
+                       ref_1250v {
+                               reg = <VADC_REF_1250MV>;
+                       };
+                       ref_gnd {
+                               reg = <VADC_GND_REF>;
+                       };
+                       ref_vdd {
+                               reg = <VADC_VDD_VADC>;
+                       };
+               };
+       };
+
+       usid1: pm8916@1 {
+               compatible = "qcom,spmi-pmic";
+               reg = <0x1 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+       };
+};