V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8,
V4L2_MBUS_FMT_SGBRG10_1X10,
V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8,
+ V4L2_MBUS_FMT_YUYV8_2X8,
};
/* To set the format on the CSI2 requires a mapping function that takes
* the following inputs:
- * - 2 different formats (at this time)
+ * - 3 different formats (at this time)
* - 2 destinations (mem, vp+mem) (vp only handled separately)
* - 2 decompression options (on, off)
* - 2 isp revisions (certain format must be handled differently on OMAP3630)
* Array indices as follows: [format][dest][decompr][is_3630]
* Not all combinations are valid. 0 means invalid.
*/
-static const u16 __csi2_fmt_map[2][2][2][2] = {
+static const u16 __csi2_fmt_map[3][2][2][2] = {
/* RAW10 formats */
{
/* Output to memory */
CSI2_USERDEF_8BIT_DATA1_DPCM10_VP },
},
},
+ /* YUYV8 2X8 formats */
+ {
+ /* Output to memory */
+ {
+ /* No DPCM decompression */
+ { CSI2_PIX_FMT_YUV422_8BIT,
+ CSI2_PIX_FMT_YUV422_8BIT },
+ /* DPCM decompression */
+ { 0, 0 },
+ },
+ /* Output to both */
+ {
+ /* No DPCM decompression */
+ { CSI2_PIX_FMT_YUV422_8BIT_VP,
+ CSI2_PIX_FMT_YUV422_8BIT_VP },
+ /* DPCM decompression */
+ { 0, 0 },
+ },
+ },
};
/*
case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8:
fmtidx = 1;
break;
+ case V4L2_MBUS_FMT_YUYV8_2X8:
+ fmtidx = 2;
+ break;
default:
WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n",
fmt->code);