]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ide: add support for CFA specified transfer modes (take 3)
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Tue, 31 Mar 2009 18:15:28 +0000 (20:15 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tue, 31 Mar 2009 18:15:28 +0000 (20:15 +0200)
Add support for the CompactFlash specific PIO modes 5/6 and MWDMA modes 3/4.

Since there were no PIO5 capable hard drives produced and one would also need
66 MHz IDE clock to actually get the difference WRT the address setup timings
programmed, I decided to simply replace the old non-standard PIO mode 5 timings
with the CFA specified ones.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stf_xl@wp.pl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-dma.c
drivers/ide/ide-iops.c
drivers/ide/ide-timings.c
drivers/ide/ide-xfer-mode.c
drivers/ide/sl82c105.c

index f9c91752f275d8340a2ae3c2b15449084b9bcd7f..a0b8cab1d9a682249200fce35bc5ea5c8223079f 100644 (file)
@@ -261,6 +261,14 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
                break;
        case XFER_MW_DMA_0:
                mask = id[ATA_ID_MWDMA_MODES];
+
+               /* Also look for the CF specific MWDMA modes... */
+               if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 0x38)) {
+                       u8 mode = ((id[ATA_ID_CFA_MODES] & 0x38) >> 3) - 1;
+
+                       mask |= ((2 << mode) - 1) << 3;
+               }
+
                if (port_ops && port_ops->mdma_filter)
                        mask &= port_ops->mdma_filter(drive);
                else
index 0e62698146b6afe5af55395a5229c931f0e9bb05..0caca342802d4d7c167bc858247044806a6a0be3 100644 (file)
@@ -306,6 +306,7 @@ int ide_driveid_update(ide_drive_t *drive)
        drive->id[ATA_ID_UDMA_MODES]  = id[ATA_ID_UDMA_MODES];
        drive->id[ATA_ID_MWDMA_MODES] = id[ATA_ID_MWDMA_MODES];
        drive->id[ATA_ID_SWDMA_MODES] = id[ATA_ID_SWDMA_MODES];
+       drive->id[ATA_ID_CFA_MODES]   = id[ATA_ID_CFA_MODES];
        /* anything more ? */
 
        kfree(id);
@@ -390,7 +391,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
                id[ATA_ID_UDMA_MODES]  &= ~0xFF00;
                id[ATA_ID_MWDMA_MODES] &= ~0x0700;
                id[ATA_ID_SWDMA_MODES] &= ~0x0700;
-       }
+               if (ata_id_is_cfa(id))
+                       id[ATA_ID_CFA_MODES] &= ~0x0E00;
+       } else  if (ata_id_is_cfa(id))
+               id[ATA_ID_CFA_MODES] &= ~0x01C0;
 
  skip:
 #ifdef CONFIG_BLK_DEV_IDEDMA
@@ -403,12 +407,18 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
        if (speed >= XFER_UDMA_0) {
                i = 1 << (speed - XFER_UDMA_0);
                id[ATA_ID_UDMA_MODES] |= (i << 8 | i);
+       } else if (ata_id_is_cfa(id) && speed >= XFER_MW_DMA_3) {
+               i = speed - XFER_MW_DMA_2;
+               id[ATA_ID_CFA_MODES] |= i << 9;
        } else if (speed >= XFER_MW_DMA_0) {
                i = 1 << (speed - XFER_MW_DMA_0);
                id[ATA_ID_MWDMA_MODES] |= (i << 8 | i);
        } else if (speed >= XFER_SW_DMA_0) {
                i = 1 << (speed - XFER_SW_DMA_0);
                id[ATA_ID_SWDMA_MODES] |= (i << 8 | i);
+       } else if (ata_id_is_cfa(id) && speed >= XFER_PIO_5) {
+               i = speed - XFER_PIO_4;
+               id[ATA_ID_CFA_MODES] |= i << 6;
        }
 
        if (!drive->init_speed)
index 81f527af8fae75f097d4ba29d80d9d7929a15b74..001a56365be577691ad8227c244d5ee88f01965d 100644 (file)
@@ -43,6 +43,8 @@ static struct ide_timing ide_timing[] = {
        { XFER_UDMA_1,     0,   0,   0,   0,   0,   0,   0,  80 },
        { XFER_UDMA_0,     0,   0,   0,   0,   0,   0,   0, 120 },
 
+       { XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20,  80,   0 },
+       { XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 100,   0 },
        { XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 120,   0 },
        { XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 150,   0 },
        { XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 480,   0 },
@@ -51,7 +53,8 @@ static struct ide_timing ide_timing[] = {
        { XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 480,   0 },
        { XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 960,   0 },
 
-       { XFER_PIO_5,     20,  50,  30, 100,  50,  30, 100,   0 },
+       { XFER_PIO_6,     10,  55,  20,  80,  55,  20,  80,   0 },
+       { XFER_PIO_5,     15,  65,  25, 100,  65,  25, 100,   0 },
        { XFER_PIO_4,     25,  70,  25, 120,  70,  25, 120,   0 },
        { XFER_PIO_3,     30,  80,  70, 180,  80,  70, 180,   0 },
 
@@ -90,6 +93,10 @@ u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
                /* conservative "downgrade" for all pre-ATA2 drives */
                if (pio < 3 && cycle < t->cycle)
                        cycle = 0; /* use standard timing */
+
+               /* Use the standard timing for the CF specific modes too */
+               if (pio > 4 && ata_id_is_cfa(id))
+                       cycle = 0;
        }
 
        return cycle ? cycle : t->cycle;
@@ -161,7 +168,8 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed,
 
                if (speed <= XFER_PIO_2)
                        p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
-               else if (speed <= XFER_PIO_5)
+               else if ((speed <= XFER_PIO_4) ||
+                        (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
                        p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
                else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
                        p.cycle = id[ATA_ID_EIDE_DMA_MIN];
index 6910f6a257e86861168996d826e635dca0b009d7..af44be9d546cedf4283cf78458f3eaf2dbaa4136 100644 (file)
@@ -9,11 +9,11 @@ static const char *udma_str[] =
         { "UDMA/16", "UDMA/25",  "UDMA/33",  "UDMA/44",
           "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
 static const char *mwdma_str[] =
-       { "MWDMA0", "MWDMA1", "MWDMA2" };
+       { "MWDMA0", "MWDMA1", "MWDMA2", "MWDMA3", "MWDMA4" };
 static const char *swdma_str[] =
        { "SWDMA0", "SWDMA1", "SWDMA2" };
 static const char *pio_str[] =
-       { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" };
+       { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5", "PIO6" };
 
 /**
  *     ide_xfer_verbose        -       return IDE mode names
@@ -30,11 +30,11 @@ const char *ide_xfer_verbose(u8 mode)
 
        if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
                s = udma_str[i];
-       else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2)
+       else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_4)
                s = mwdma_str[i];
        else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
                s = swdma_str[i];
-       else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5)
+       else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_6)
                s = pio_str[i & 0x7];
        else if (mode == XFER_PIO_SLOW)
                s = "PIO SLOW";
@@ -79,7 +79,10 @@ u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
                }
 
                if (id[ATA_ID_FIELD_VALID] & 2) {             /* ATA2? */
-                       if (ata_id_has_iordy(id)) {
+                       if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 7))
+                               pio_mode = 4 + min_t(int, 2,
+                                                    id[ATA_ID_CFA_MODES] & 7);
+                       else if (ata_id_has_iordy(id)) {
                                if (id[ATA_ID_PIO_MODES] & 7) {
                                        overridden = 0;
                                        if (id[ATA_ID_PIO_MODES] & 4)
@@ -239,7 +242,7 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
 
        BUG_ON(rate < XFER_PIO_0);
 
-       if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5)
+       if (rate >= XFER_PIO_0 && rate <= XFER_PIO_6)
                return ide_set_pio_mode(drive, rate);
 
        return ide_set_dma_mode(drive, rate);
index d6f8977191c85600aad34a2d12debbfb4268d55a..b0a460625335c9c469b94ea94a7d4210c305e2ab 100644 (file)
@@ -61,7 +61,8 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
        if (cmd_off == 0)
                cmd_off = 1;
 
-       if (pio > 2 || ata_id_has_iordy(drive->id))
+       if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+           !(pio > 4 && ata_id_is_cfa(drive->id)))
                iordy = 0x40;
 
        return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;