'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
The driver supports multiple bonding modes to allow for both high
- perfomance and high availability operation.
+ performance and high availability operation.
Refer to <file:Documentation/networking/bonding.txt> for more
information.
depends on NET_VENDOR_3COM && (PCI || EISA)
select MII
---help---
- This option enables driver support for a large number of 10mbps and
- 10/100mbps EISA, PCI and PCMCIA 3Com network cards:
+ This option enables driver support for a large number of 10Mbps and
+ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
"Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
"Boomerang" (EtherLink XL 3c900 or 3c905) PCI
depends on NET_ISA
---help---
If you have a network (Ethernet) card of this type, say Y. This
- driver supports intel i82595{FX,TX} based boards. Note however
+ driver supports Intel i82595{FX,TX} based boards. Note however
that the EtherExpress PRO/100 Ethernet card has its own separate
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
help
Additional receive skb headroom. Note, that driver
will always reserve at least 2 bytes to make IP header
- aligned, so usualy there is no need to add any additional
+ aligned, so usually there is no need to add any additional
headroom.
If unsure, set to 0.
will be called myri_sbus. This is recommended.
config NS83820
- tristate "National Semiconduct DP83820 support"
+ tristate "National Semiconductor DP83820 support"
depends on PCI
help
This is a driver for the National Semiconductor DP83820 series
Say Y here if you want to be able to filter the packets passing over
PPP interfaces. This allows you to control which packets count as
activity (i.e. which packets will reset the idle timer or bring up
- a demand-dialled link) and which packets are to be dropped entirely.
+ a demand-dialed link) and which packets are to be dropped entirely.
You need to say Y here if you wish to use the pass-filter and
active-filter options to pppd.
<file:Documentation/networking/shaper.txt> for more information.
An alternative to this traffic shaper is the experimental
- Class-Based Queueing (CBQ) scheduling support which you get if you
- say Y to "QoS and/or fair queueing" above.
+ Class-Based Queuing (CBQ) scheduling support which you get if you
+ say Y to "QoS and/or fair queuing" above.
To compile this driver as a module, choose M here: the module
will be called shaper. If unsure, say N.
packet is stuffed with an extra 4 byte "cookie" which doesn't
actually appear on the network. After transmit the driver will send
back a packet with protocol byte 0 containing the status of the
- transmition:
+ transmission:
0=no hardware acknowledge
1=excessive nak
- 2=transmition accepted by the reciever hardware
+ 2=transmission accepted by the receiver hardware
Received packets are also stuffed with the extra 4 bytes but it will
be random data.
Say Y here if you want to build support for the USB IrDA FIR Dongle
device driver. To compile it as a module, choose M here: the module
will be called irda-usb. IrDA-USB support the various IrDA USB
- dongles available and most of their pecularities. Those dongles
+ dongles available and most of their peculiarities. Those dongles
plug in the USB port of your computer, are plug and play, and
support SIR and FIR (4Mbps) speeds. On the other hand, those
dongles tend to be less efficient than a FIR chipset.
help
Say Y here if you want to build support for the ALi M5123 FIR
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
- M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
+ M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
SIR, MIR and FIR (4Mbps) speeds.
To compile it as a module, choose M here: the module will be called
bool "WANPIPE Frame Relay support"
depends on VENDOR_SANGOMA
help
- Connect a WANPIPE card to a Frame Relay network, or use Frame Felay
+ Connect a WANPIPE card to a Frame Relay network, or use Frame Relay
API to develop custom applications.
Contains the Ethernet Bridging over Frame Relay feature, where
config IPW2100
tristate "Intel PRO/Wireless 2100 Network Connection"
- depends on NET_RADIO && PCI && IEEE80211
+ depends on NET_RADIO && PCI
select FW_LOADER
+ select IEEE80211
---help---
A driver for the Intel PRO/Wireless 2100 Network
Connection 802.11b wireless network adapter.
config IPW2200
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on NET_RADIO && IEEE80211 && PCI
+ depends on NET_RADIO && PCI
select FW_LOADER
+ select IEEE80211
---help---
A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
Connection adapters.
In order to use this driver, you will need a firmware image for it.
You can obtain the firmware from
<http://ipw2200.sf.net/>. See the above referenced README.ipw2200
- for information on where to install the firmare images.
+ for information on where to install the firmware images.
You will also very likely need the Wireless Tools in order to
configure your card:
say M here and read <file:Documentation/modules.txt>. The module
will be called ipw2200.ko.
+config IPW2200_MONITOR
+ bool "Enable promiscuous mode"
+ depends on IPW2200
+ ---help---
+ Enables promiscuous/monitor mode support for the ipw2200 driver.
+ With this feature compiled into the driver, you can switch to
+ promiscuous mode via the Wireless Tool's Monitor mode. While in this
+ mode, no packets can be sent.
+
+config IPW_QOS
+ bool "Enable QoS support"
+ depends on IPW2200 && EXPERIMENTAL
+
config IPW2200_DEBUG
bool "Enable full debugging output in IPW2200 module."
depends on IPW2200
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
- aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
- aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
wkr.len = sizeof(wkr);
wkr.kindex = 0xffff;
wkr.mac[0] = (char)index;
- if (perm) printk(KERN_INFO "Setting transmit key to %d\n", index);
if (perm) ai->defindex = (char)index;
} else {
// We are actually setting the key
wkr.klen = keylen;
memcpy( wkr.key, key, keylen );
memcpy( wkr.mac, macaddr, ETH_ALEN );
- printk(KERN_INFO "Setting key %d\n", index);
}
if (perm) disable_MAC(ai, lock);
CapabilityRid cap_rid; /* Card capability info */
int perm = ( encoding->flags & IW_ENCODE_TEMP ? 0 : 1 );
u16 currentAuthType = local->config.authType;
- int idx, key_len, alg = ext->alg; /* Check encryption mode */
+ int idx, key_len, alg = ext->alg, set_key = 1;
wep_key_t key;
/* Is WEP supported ? */
if (encoding->flags & IW_ENCODE_DISABLED)
alg = IW_ENCODE_ALG_NONE;
- /* Just setting the transmit key? */
if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ /* Only set transmit key index here, actual
+ * key is set below if needed.
+ */
set_wep_key(local, idx, NULL, 0, perm, 1);
- } else {
+ set_key = ext->key_len > 0 ? 1 : 0;
+ }
+
+ if (set_key) {
/* Set the requested key first */
memset(key.key, 0, MAX_KEY_SIZE);
switch (alg) {
#define MAC_BOOT_COMPLETE 0x0010 // MAC boot has been completed
#define MAC_INIT_OK 0x0002 // MAC boot has been completed
-#define C80211_SUBTYPE_MGMT_ASS_REQUEST 0x00
-#define C80211_SUBTYPE_MGMT_ASS_RESPONSE 0x10
-#define C80211_SUBTYPE_MGMT_REASS_REQUEST 0x20
-#define C80211_SUBTYPE_MGMT_REASS_RESPONSE 0x30
-#define C80211_SUBTYPE_MGMT_ProbeRequest 0x40
-#define C80211_SUBTYPE_MGMT_ProbeResponse 0x50
-#define C80211_SUBTYPE_MGMT_BEACON 0x80
-#define C80211_SUBTYPE_MGMT_ATIM 0x90
-#define C80211_SUBTYPE_MGMT_DISASSOSIATION 0xA0
-#define C80211_SUBTYPE_MGMT_Authentication 0xB0
-#define C80211_SUBTYPE_MGMT_Deauthentication 0xC0
-
-#define C80211_MGMT_AAN_OPENSYSTEM 0x0000
-#define C80211_MGMT_AAN_SHAREDKEY 0x0001
-
-#define C80211_MGMT_CAPABILITY_ESS 0x0001 // see 802.11 p.58
-#define C80211_MGMT_CAPABILITY_IBSS 0x0002 // - " -
-#define C80211_MGMT_CAPABILITY_CFPollable 0x0004 // - " -
-#define C80211_MGMT_CAPABILITY_CFPollRequest 0x0008 // - " -
-#define C80211_MGMT_CAPABILITY_Privacy 0x0010 // - " -
-
-#define C80211_MGMT_SC_Success 0
-#define C80211_MGMT_SC_Unspecified 1
-#define C80211_MGMT_SC_SupportCapabilities 10
-#define C80211_MGMT_SC_ReassDenied 11
-#define C80211_MGMT_SC_AssDenied 12
-#define C80211_MGMT_SC_AuthAlgNotSupported 13
-#define C80211_MGMT_SC_AuthTransSeqNumError 14
-#define C80211_MGMT_SC_AuthRejectChallenge 15
-#define C80211_MGMT_SC_AuthRejectTimeout 16
-#define C80211_MGMT_SC_AssDeniedHandleAP 17
-#define C80211_MGMT_SC_AssDeniedBSSRate 18
-
-#define C80211_MGMT_ElementID_SSID 0
-#define C80211_MGMT_ElementID_SupportedRates 1
-#define C80211_MGMT_ElementID_ChallengeText 16
-#define C80211_MGMT_CAPABILITY_ShortPreamble 0x0020
-
#define MIB_MAX_DATA_BYTES 212
#define MIB_HEADER_SIZE 4 /* first four fields */
u8 channel)
{
int rejoin = 0;
- int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+ int new = capability & MFIE_TYPE_POWER_CONSTRAINT ?
SHORT_PREAMBLE : LONG_PREAMBLE;
if (priv->preamble != new) {
memcpy(header.addr2, priv->dev->dev_addr, 6);
memcpy(header.addr3, priv->CurrentBSSID, 6);
- body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS);
+ body.capability = cpu_to_le16(WLAN_CAPABILITY_ESS);
if (priv->wep_is_on)
- body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_Privacy);
+ body.capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
if (priv->preamble == SHORT_PREAMBLE)
- body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble);
+ body.capability |= cpu_to_le16(MFIE_TYPE_POWER_CONSTRAINT);
body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period);
bodysize = 12 + priv->SSID_size;
}
- ssid_el_p[0] = C80211_MGMT_ElementID_SSID;
+ ssid_el_p[0] = MFIE_TYPE_SSID;
ssid_el_p[1] = priv->SSID_size;
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
- ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates;
+ ssid_el_p[2 + priv->SSID_size] = MFIE_TYPE_RATES;
ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len,
u8 *ssid, int is_beacon)
{
- u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3;
+ u8 *bss = capability & WLAN_CAPABILITY_ESS ? header->addr2 : header->addr3;
int i, index;
for (index = -1, i = 0; i < priv->BSS_list_entries; i++)
priv->BSSinfo[index].channel = channel;
priv->BSSinfo[index].beacon_period = beacon_period;
- priv->BSSinfo[index].UsingWEP = capability & C80211_MGMT_CAPABILITY_Privacy;
+ priv->BSSinfo[index].UsingWEP = capability & WLAN_CAPABILITY_PRIVACY;
memcpy(priv->BSSinfo[index].SSID, ssid, ssid_len);
priv->BSSinfo[index].SSIDsize = ssid_len;
- if (capability & C80211_MGMT_CAPABILITY_IBSS)
+ if (capability & WLAN_CAPABILITY_IBSS)
priv->BSSinfo[index].BSStype = IW_MODE_ADHOC;
- else if (capability & C80211_MGMT_CAPABILITY_ESS)
+ else if (capability & WLAN_CAPABILITY_ESS)
priv->BSSinfo[index].BSStype =IW_MODE_INFRA;
- priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+ priv->BSSinfo[index].preamble = capability & MFIE_TYPE_POWER_CONSTRAINT ?
SHORT_PREAMBLE : LONG_PREAMBLE;
}
u16 trans_seq_no = le16_to_cpu(auth->trans_seq);
u16 system = le16_to_cpu(auth->alg);
- if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) {
+ if (status == WLAN_STATUS_SUCCESS && !priv->wep_is_on) {
/* no WEP */
if (priv->station_was_associated) {
atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
}
}
- if (status == C80211_MGMT_SC_Success && priv->wep_is_on) {
+ if (status == WLAN_STATUS_SUCCESS && priv->wep_is_on) {
int should_associate = 0;
/* WEP */
if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum)
return;
- if (system == C80211_MGMT_AAN_OPENSYSTEM) {
+ if (system == WLAN_AUTH_OPEN) {
if (trans_seq_no == 0x0002) {
should_associate = 1;
}
- } else if (system == C80211_MGMT_AAN_SHAREDKEY) {
+ } else if (system == WLAN_AUTH_SHARED_KEY) {
if (trans_seq_no == 0x0002 &&
- auth->el_id == C80211_MGMT_ElementID_ChallengeText) {
+ auth->el_id == MFIE_TYPE_CHALLENGE) {
send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len);
return;
} else if (trans_seq_no == 0x0004) {
if (frame_len < 8 + rates_len)
return;
- if (status == C80211_MGMT_SC_Success) {
- if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE)
+ if (status == WLAN_STATUS_SUCCESS) {
+ if (subtype == IEEE80211_STYPE_ASSOC_RESP)
priv->AssociationRequestRetryCnt = 0;
else
priv->ReAssociationRequestRetryCnt = 0;
return;
}
- if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE &&
- status != C80211_MGMT_SC_AssDeniedBSSRate &&
- status != C80211_MGMT_SC_SupportCapabilities &&
+ if (subtype == IEEE80211_STYPE_ASSOC_RESP &&
+ status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+ status != WLAN_STATUS_CAPS_UNSUPPORTED &&
priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
priv->AssociationRequestRetryCnt++;
return;
}
- if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE &&
- status != C80211_MGMT_SC_AssDeniedBSSRate &&
- status != C80211_MGMT_SC_SupportCapabilities &&
+ if (subtype == IEEE80211_STYPE_REASSOC_RESP &&
+ status != WLAN_STATUS_ASSOC_DENIED_RATES &&
+ status != WLAN_STATUS_CAPS_UNSUPPORTED &&
priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
priv->ReAssociationRequestRetryCnt++;
subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE;
switch (subtype) {
- case C80211_SUBTYPE_MGMT_BEACON:
- case C80211_SUBTYPE_MGMT_ProbeResponse:
+ case IEEE80211_STYPE_BEACON:
+ case IEEE80211_STYPE_PROBE_RESP:
/* beacon frame has multiple variable-length fields -
never let an engineer loose with a data structure design. */
beacon_interval, channel, rssi,
ssid_length,
&beacon->rates_el_id,
- subtype == C80211_SUBTYPE_MGMT_BEACON);
+ subtype == IEEE80211_STYPE_BEACON);
}
break;
- case C80211_SUBTYPE_MGMT_Authentication:
+ case IEEE80211_STYPE_AUTH:
if (priv->station_state == STATION_STATE_AUTHENTICATING)
authenticate(priv, frame_len);
break;
- case C80211_SUBTYPE_MGMT_ASS_RESPONSE:
- case C80211_SUBTYPE_MGMT_REASS_RESPONSE:
+ case IEEE80211_STYPE_ASSOC_RESP:
+ case IEEE80211_STYPE_REASSOC_RESP:
if (priv->station_state == STATION_STATE_ASSOCIATING ||
priv->station_state == STATION_STATE_REASSOCIATING)
break;
- case C80211_SUBTYPE_MGMT_DISASSOSIATION:
+ case IEEE80211_STYPE_DISASSOC:
if (priv->station_is_associated &&
priv->operating_mode == IW_MODE_INFRA &&
is_frame_from_current_bss(priv, header)) {
break;
- case C80211_SUBTYPE_MGMT_Deauthentication:
+ case IEEE80211_STYPE_DEAUTH:
if (priv->operating_mode == IW_MODE_INFRA &&
is_frame_from_current_bss(priv, header)) {
priv->station_was_associated = 0;
priv->AuthenticationRequestRetryCnt = 0;
restart_search(priv);
} else {
- int auth = C80211_MGMT_AAN_OPENSYSTEM;
+ int auth = WLAN_AUTH_OPEN;
priv->AuthenticationRequestRetryCnt++;
priv->CurrentAuthentTransactionSeqNum = 0x0001;
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
if (priv->wep_is_on && priv->exclude_unencrypted)
- auth = C80211_MGMT_AAN_SHAREDKEY;
+ auth = WLAN_AUTH_SHARED_KEY;
send_authentication_request(priv, auth, NULL, 0);
}
break;
priv->station_was_associated = priv->station_is_associated;
atmel_enter_state(priv, STATION_STATE_READY);
} else {
- int auth = C80211_MGMT_AAN_OPENSYSTEM;
+ int auth = WLAN_AUTH_OPEN;
priv->AuthenticationRequestRetryCnt = 0;
atmel_enter_state(priv, STATION_STATE_AUTHENTICATING);
mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
priv->CurrentAuthentTransactionSeqNum = 0x0001;
if (priv->wep_is_on && priv->exclude_unencrypted)
- auth = C80211_MGMT_AAN_SHAREDKEY;
+ auth = WLAN_AUTH_SHARED_KEY;
send_authentication_request(priv, auth, NULL, 0);
}
return;
return 0;
}
- if (!priv->ieee->wpa_enabled && (network->wpa_ie_len > 0 ||
- network->rsn_ie_len > 0)) {
+ if (priv->ieee->wpa_enabled &&
+ network->wpa_ie_len == 0 && network->rsn_ie_len == 0) {
IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded "
"because of WPA capability mismatch.\n",
escape_essid(network->ssid, network->ssid_len),
priv->assoc_request.auth_type = AUTH_SHARED_KEY;
priv->assoc_request.auth_key = priv->ieee->sec.active_key;
- if ((priv->ieee->sec.level == SEC_LEVEL_1) &&
- !(priv->ieee->host_encrypt || priv->ieee->host_decrypt))
+ if (priv->ieee->sec.level == SEC_LEVEL_1)
ipw_send_wep_keys(priv, DCW_WEP_KEY_SEC_TYPE_WEP);
} else if ((priv->capability & CAP_PRIVACY_ON) &&
/* Driver needs to initialize the geography map before using
* these helper functions */
- BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+ if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
+ return 0;
if (ieee->freq_band & IEEE80211_24GHZ_BAND)
for (i = 0; i < ieee->geo.bg_channels; i++)
/* Driver needs to initialize the geography map before using
* these helper functions */
- BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+ if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
+ return -1;
if (ieee->freq_band & IEEE80211_24GHZ_BAND)
for (i = 0; i < ieee->geo.bg_channels; i++)
/* Driver needs to initialize the geography map before using
* these helper functions */
- BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0);
+ if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0)
+ return 0;
freq /= 100000;
static int debug = 0;
u32 ieee80211_debug_level = 0;
-struct proc_dir_entry *ieee80211_proc = NULL;
+static struct proc_dir_entry *ieee80211_proc = NULL;
static int show_debug_level(char *page, char **start, off_t offset,
int count, int *eof, void *data)
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
+ memset(&iwe, 0, sizeof(iwe));
if (network->wpa_ie_len) {
- char buf[MAX_WPA_IE_LEN * 2 + 30];
-
- u8 *p = buf;
- p += sprintf(p, "wpa_ie=");
- for (i = 0; i < network->wpa_ie_len; i++) {
- p += sprintf(p, "%02x", network->wpa_ie[i]);
- }
-
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = strlen(buf);
+ char buf[MAX_WPA_IE_LEN];
+ memcpy(buf, network->wpa_ie, network->wpa_ie_len);
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = network->wpa_ie_len;
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
+ memset(&iwe, 0, sizeof(iwe));
if (network->rsn_ie_len) {
- char buf[MAX_WPA_IE_LEN * 2 + 30];
-
- u8 *p = buf;
- p += sprintf(p, "rsn_ie=");
- for (i = 0; i < network->rsn_ie_len; i++) {
- p += sprintf(p, "%02x", network->rsn_ie[i]);
- }
-
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = strlen(buf);
+ char buf[MAX_WPA_IE_LEN];
+ memcpy(buf, network->rsn_ie, network->rsn_ie_len);
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = network->rsn_ie_len;
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
projects / linux-beck.git / commitdiff