spi: bcm2835: change timeout of polling driver to 1s

The way that the timeout code is written in the polling function
the timeout does also trigger when interrupted or rescheduled while
in the polling loop.

This patch changes the timeout from effectively 20ms (=2 jiffies) to
1 second and removes the time that the transfer really takes out of
the computation, as - per design - this is <30us and the jiffie resolution
is 10ms so that does not make any difference what so ever.

Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index f63864a893c520c40d9c79f1c8ca838b15dedc8c..37875cf942f7b928c5d31f44345b5c060f182b36 100644 (file)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -164,13 +164,12 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
                                         unsigned long xfer_time_us)
 {
        struct bcm2835_spi *bs = spi_master_get_devdata(master);
-       unsigned long timeout = jiffies +
-               max(4 * xfer_time_us * HZ / 1000000, 2uL);
+       /* set timeout to 1 second of maximum polling */
+       unsigned long timeout = jiffies + HZ;
 
        /* enable HW block without interrupts */
        bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA);
 
-       /* set timeout to 4x the expected time, or 2 jiffies */
        /* loop until finished the transfer */
        while (bs->rx_len) {
                /* read from fifo as much as possible */