]> git.karo-electronics.de Git - linux-beck.git/commitdiff
ARM: dts: Add basic dm816x device tree configuration
authorTony Lindgren <tony@atomide.com>
Mon, 19 Jan 2015 19:47:35 +0000 (11:47 -0800)
committerTony Lindgren <tony@atomide.com>
Mon, 19 Jan 2015 19:47:35 +0000 (11:47 -0800)
Similar to other omap variants, let's add dm816x support.

Note that this is based on generated data from the
TI81XX-LINUX-PSP-04.04.00.02 patches published at:

http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html

I've verified the basic functionality, but have not been
able to test all the devices on dm8168-evm.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/dm816x.dtsi [new file with mode: 0644]

diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
new file mode 100644 (file)
index 0000000..5b5df63
--- /dev/null
@@ -0,0 +1,386 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+       compatible = "ti,dm816";
+       interrupt-parent = <&intc>;
+
+       aliases {
+               i2c0 = &i2c1;
+               i2c1 = &i2c2;
+               serial0 = &uart1;
+               serial1 = &uart2;
+               serial2 = &uart3;
+               ethernet0 = &eth0;
+               ethernet1 = &eth1;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               cpu@0 {
+                       compatible = "arm,cortex-a8";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+       };
+
+       pmu {
+               compatible = "arm,cortex-a8-pmu";
+               interrupts = <3>;
+       };
+
+       /*
+        * The soc node represents the soc top level view. It is used for IPs
+        * that are not memory mapped in the MPU view or for the MPU itself.
+        */
+       soc {
+               compatible = "ti,omap-infra";
+               mpu {
+                       compatible = "ti,omap3-mpu";
+                       ti,hwmods = "mpu";
+               };
+       };
+
+       dm816x_pinmux: pinmux@44e10800 {
+               compatible = "pinctrl-single";
+               reg = <0x48140800 0x50a>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-single,register-width = <16>;
+               pinctrl-single,function-mask = <0xf>;
+       };
+
+       /*
+        * XXX: Use a flat representation of the dm816x interconnect.
+        * The real dm816x interconnect network is quite complex. Since
+        * it will not bring real advantage to represent that in DT
+        * for the moment, just use a fake OCP bus entry to represent
+        * the whole bus hierarchy.
+        */
+       ocp {
+               compatible = "ti,omap3-l3-smx", "simple-bus";
+               reg = <0x44000000 0x10000>;
+               interrupts = <9 10>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               ti,hwmods = "l3_main";
+
+               prcm: prcm@48180000 {
+                       compatible = "ti,dm816-prcm";
+                       reg = <0x48180000 0x4000>;
+
+                       prcm_clocks: clocks {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+
+                       prcm_clockdomains: clockdomains {
+                       };
+               };
+
+               scrm: scrm@48140000 {
+                       compatible = "ti,dm816-scrm";
+                       reg = <0x48140000 0x21000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x48140000 0x21000>;
+
+                       scrm_clocks: clocks {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+
+                       scrm_clockdomains: clockdomains {
+                       };
+               };
+
+               cm: syscon@44e10000 {
+                       compatible = "ti,am33xx-controlmodule", "syscon";
+                       reg = <0x44e10000 0x800>;
+               };
+
+               edma: edma@49000000 {
+                       compatible = "ti,edma3";
+                       ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
+                       reg =   <0x49000000 0x10000>,
+                               <0x44e10f90 0x40>;
+                       interrupts = <12 13 14>;
+                       #dma-cells = <1>;
+               };
+
+               elm: elm@48080000 {
+                       compatible = "ti,816-elm";
+                       ti,hwmods = "elm";
+                       reg = <0x48080000 0x2000>;
+                       interrupts = <4>;
+               };
+
+               gpio1: gpio@48032000 {
+                       compatible = "ti,omap3-gpio";
+                       ti,hwmods = "gpio1";
+                       reg = <0x48032000 0x1000>;
+                       interrupts = <97>;
+               };
+
+               gpio2: gpio@4804c000 {
+                       compatible = "ti,omap3-gpio";
+                       ti,hwmods = "gpio2";
+                       reg = <0x4804c000 0x1000>;
+                       interrupts = <99>;
+               };
+
+               gpmc: gpmc@50000000 {
+                       compatible = "ti,am3352-gpmc";
+                       ti,hwmods = "gpmc";
+                       reg = <0x50000000 0x2000>;
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       interrupts = <100>;
+                       gpmc,num-cs = <6>;
+                       gpmc,num-waitpins = <2>;
+               };
+
+               i2c1: i2c@48028000 {
+                       compatible = "ti,omap4-i2c";
+                       ti,hwmods = "i2c1";
+                       reg = <0x48028000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupts = <70>;
+                       dmas = <&edma 58 &edma 59>;
+                       dma-names = "tx", "rx";
+               };
+
+               i2c2: i2c@4802a000 {
+                       compatible = "ti,omap4-i2c";
+                       ti,hwmods = "i2c2";
+                       reg = <0x4802a000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupts = <71>;
+                       dmas = <&edma 60 &edma 61>;
+                       dma-names = "tx", "rx";
+               };
+
+               intc: interrupt-controller@48200000 {
+                       compatible = "ti,dm816-intc";
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+                       reg = <0x48200000 0x1000>;
+               };
+
+               mailbox: mailbox@480c8000 {
+                       compatible = "ti,omap4-mailbox";
+                       reg = <0x480c8000 0x2000>;
+                       interrupts = <77>;
+                       ti,hwmods = "mailbox";
+                       ti,mbox-num-users = <4>;
+                       ti,mbox-num-fifos = <12>;
+                       mbox_dsp: mbox_dsp {
+                               ti,mbox-tx = <3 0 0>;
+                               ti,mbox-rx = <0 0 0>;
+                       };
+               };
+
+               mdio: mdio@4a100800 {
+                       compatible = "ti,davinci_mdio";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x4a100800 0x100>;
+                       ti,hwmods = "davinci_mdio";
+                       bus_freq = <1000000>;
+                       phy0: ethernet-phy@0 {
+                               reg = <1>;
+                       };
+                       phy1: ethernet-phy@1 {
+                               reg = <2>;
+                       };
+               };
+
+               eth0: ethernet@4a100000 {
+                       compatible = "ti,dm816-emac";
+                       ti,hwmods = "emac0";
+                       reg = <0x4a100000 0x800
+                              0x4a100900 0x3700>;
+                       clocks = <&sysclk24_ck>;
+                       ti,davinci-ctrl-reg-offset = <0>;
+                       ti,davinci-ctrl-mod-reg-offset = <0x900>;
+                       ti,davinci-ctrl-ram-offset = <0x2000>;
+                       ti,davinci-ctrl-ram-size = <0x2000>;
+                       interrupts = <40 41 42 43>;
+                       phy-handle = <&phy0>;
+               };
+
+               eth1: ethernet@4a120000 {
+                       compatible = "ti,dm816-emac";
+                       ti,hwmods = "emac1";
+                       reg = <0x4a120000 0x4000>;
+                       clocks = <&sysclk24_ck>;
+                       ti,davinci-ctrl-reg-offset = <0>;
+                       ti,davinci-ctrl-mod-reg-offset = <0x900>;
+                       ti,davinci-ctrl-ram-offset = <0x2000>;
+                       ti,davinci-ctrl-ram-size = <0x2000>;
+                       interrupts = <44 45 46 47>;
+                       phy-handle = <&phy1>;
+               };
+
+               mcspi1: spi@48030000 {
+                       compatible = "ti,omap4-mcspi";
+                       reg = <0x48030000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupts = <65>;
+                       ti,spi-num-cs = <4>;
+                       ti,hwmods = "mcspi1";
+                       dmas = <&edma 16 &edma 17
+                               &edma 18 &edma 19>;
+                       dma-names = "tx0", "rx0", "tx1", "rx1";
+               };
+
+               mmc1: mmc@48060000 {
+                       compatible = "ti,omap4-hsmmc";
+                       reg = <0x48060000 0x11000>;
+                       ti,hwmods = "mmc1";
+                       interrupts = <64>;
+                       dmas = <&edma 24 &edma 25>;
+                       dma-names = "tx", "rx";
+               };
+
+               timer1: timer@4802e000 {
+                       compatible = "ti,dm816-timer";
+                       reg = <0x4802e000 0x2000>;
+                       interrupts = <67>;
+                       ti,hwmods = "timer1";
+                       ti,timer-alwon;
+               };
+
+               timer2: timer@48040000 {
+                       compatible = "ti,dm816-timer";
+                       reg = <0x48040000 0x2000>;
+                       interrupts = <68>;
+                       ti,hwmods = "timer2";
+               };
+
+               timer3: timer@48042000 {
+                       compatible = "ti,dm816-timer";
+                       reg = <0x48042000 0x2000>;
+                       interrupts = <69>;
+                       ti,hwmods = "timer3";
+               };
+
+               timer4: timer@48044000 {
+                       compatible = "ti,dm816-timer";
+                       reg = <0x48044000 0x2000>;
+                       interrupts = <92>;
+                       ti,hwmods = "timer4";
+               };
+
+               timer5: timer@48046000 {
+                       compatible = "ti,dm816-timer";
+                       reg = <0x48046000 0x2000>;
+                       interrupts = <93>;
+                       ti,hwmods = "timer5";
+               };
+
+               timer6: timer@48048000 {
+                       compatible = "ti,dm816-timer";
+                       reg = <0x48048000 0x2000>;
+                       interrupts = <94>;
+                       ti,hwmods = "timer6";
+               };
+
+               timer7: timer@4804a000 {
+                       compatible = "ti,dm816-timer";
+                       reg = <0x4804a000 0x2000>;
+                       interrupts = <95>;
+                       ti,hwmods = "timer7";
+               };
+
+               uart1: uart@48020000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart1";
+                       reg = <0x48020000 0x2000>;
+                       clock-frequency = <48000000>;
+                       interrupts = <72>;
+                       dmas = <&edma 26 &edma 27>;
+                       dma-names = "tx", "rx";
+               };
+
+               uart2: uart@48022000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart2";
+                       reg = <0x48022000 0x2000>;
+                       clock-frequency = <48000000>;
+                       interrupts = <73>;
+                       dmas = <&edma 28 &edma 29>;
+                       dma-names = "tx", "rx";
+               };
+
+               uart3: uart@48024000 {
+                       compatible = "ti,omap3-uart";
+                       ti,hwmods = "uart3";
+                       reg = <0x48024000 0x2000>;
+                       clock-frequency = <48000000>;
+                       interrupts = <74>;
+                       dmas = <&edma 30 &edma 31>;
+                       dma-names = "tx", "rx";
+               };
+
+               /* NOTE: USB needs a transceiver driver for phys to work */
+               usb: usb_otg_hs@47401000 {
+                       compatible = "ti,am33xx-usb";
+                       reg = <0x47401000 0x400000>;
+                       ranges;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ti,hwmods = "usb_otg_hs";
+
+                       usb0: usb@47401000 {
+                               compatible = "ti,musb-am33xx";
+                               reg = <0x47401400 0x400
+                                      0x47401000 0x200>;
+                               reg-names = "mc", "control";
+                               interrupts = <18>;
+                               interrupt-names = "mc";
+                               dr_mode = "otg";
+                               mentor,multipoint = <1>;
+                               mentor,num-eps = <16>;
+                               mentor,ram-bits = <12>;
+                               mentor,power = <500>;
+                       };
+
+                       usb1: usb@47401800 {
+                               compatible = "ti,musb-am33xx";
+                               status = "disabled";
+                               reg = <0x47401c00 0x400
+                                      0x47401800 0x200>;
+                               reg-names = "mc", "control";
+                               interrupts = <19>;
+                               interrupt-names = "mc";
+                               dr_mode = "otg";
+                               mentor,multipoint = <1>;
+                               mentor,num-eps = <16>;
+                               mentor,ram-bits = <12>;
+                               mentor,power = <500>;
+                       };
+               };
+
+               wd_timer2: wd_timer@480c2000 {
+                       compatible = "ti,omap3-wdt";
+                       ti,hwmods = "wd_timer";
+                       reg = <0x480c2000 0x1000>;
+                       interrupts = <0>;
+               };
+       };
+};
+