ARM: shmobile: koelsch: Add DU device

Only the LVDS output is currently supported.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 6e12914d6d587ade5543e90bdfb7c05459684f77..5d84fb6f3c5c07897b5cc670a41498c9490fe7b8 100644 (file)
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -19,6 +19,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -26,13 +27,66 @@
 #include <linux/leds.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r8a7791.h>
 #include <mach/rcar-gen2.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+       {
+               .type = RCAR_DU_ENCODER_NONE,
+               .output = RCAR_DU_OUTPUT_LVDS0,
+               .connector.lvds.panel = {
+                       .width_mm = 210,
+                       .height_mm = 158,
+                       .mode = {
+                               .clock = 65000,
+                               .hdisplay = 1024,
+                               .hsync_start = 1048,
+                               .hsync_end = 1184,
+                               .htotal = 1344,
+                               .vdisplay = 768,
+                               .vsync_start = 771,
+                               .vsync_end = 777,
+                               .vtotal = 806,
+                               .flags = 0,
+                       },
+               },
+       },
+};
+
+static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {
+       .encoders = koelsch_du_encoders,
+       .num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+       DEFINE_RES_MEM(0xfeb00000, 0x40000),
+       DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+       DEFINE_RES_IRQ(gic_spi(256)),
+       DEFINE_RES_IRQ(gic_spi(268)),
+};
+
+static void __init koelsch_add_du_device(void)
+{
+       struct platform_device_info info = {
+               .name = "rcar-du-r8a7791",
+               .id = -1,
+               .res = du_resources,
+               .num_res = ARRAY_SIZE(du_resources),
+               .data = &koelsch_du_pdata,
+               .size_data = sizeof(koelsch_du_pdata),
+               .dma_mask = DMA_BIT_MASK(32),
+       };
+
+       platform_device_register_full(&info);
+}
+
 /* LEDS */
 static struct gpio_led koelsch_leds[] = {
        {
@@ -80,6 +134,13 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
 };
 
 static const struct pinctrl_map koelsch_pinctrl_map[] = {
+       /* DU */
+       PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+                                 "du_rgb666", "du"),
+       PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+                                 "du_sync", "du"),
+       PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+                                 "du_clk_out_0", "du"),
        /* SCIF0 (CN19: DEBUG SERIAL0) */
        PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
                                  "scif0_data_d", "scif0"),
@@ -101,6 +162,8 @@ static void __init koelsch_add_standard_devices(void)
        platform_device_register_data(&platform_bus, "gpio-keys", -1,
                                      &koelsch_keys_pdata,
                                      sizeof(koelsch_keys_pdata));
+
+       koelsch_add_du_device();
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {