source "drivers/media/usb/tlg2300/Kconfig"
source "drivers/media/usb/usbvision/Kconfig"
source "drivers/media/usb/stk1160/Kconfig"
+source "drivers/media/usb/go7007/Kconfig"
endif
if (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
obj-$(CONFIG_VIDEO_TM6000) += tm6000/
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
obj-$(CONFIG_VIDEO_USBTV) += usbtv/
+obj-$(CONFIG_VIDEO_GO7007) += go7007/
s2250-y := s2250-board.o
-# Uncomment when the saa7134 patches get into upstream
-#obj-$(CONFIG_VIDEO_SAA7134) += saa7134-go7007.o
-#ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/pci/saa7134
-
ccflags-$(CONFIG_VIDEO_GO7007_LOADER:m=y) += -Idrivers/media/common
source "drivers/staging/media/dt3155v4l/Kconfig"
-source "drivers/staging/media/go7007/Kconfig"
-
source "drivers/staging/media/omap24xx/Kconfig"
source "drivers/staging/media/omap4iss/Kconfig"
obj-$(CONFIG_DVB_CXD2099) += cxd2099/
obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/
-obj-$(CONFIG_VIDEO_GO7007) += go7007/
obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/
obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/
obj-$(CONFIG_VIDEO_OMAP2) += omap24xx/
+++ /dev/null
-Todo:
- - let s2250-board use i2c subdevs as well instead of hardcoding
- support for the i2c devices.
- - when the driver is moved out of staging, support for saa7134-go7007
- should be added to the saa7134 driver. The patch for that is
- included below.
-
-Patch for saa7134:
-
-diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c
-index dc68cf1..9a53794 100644
---- a/drivers/media/pci/saa7134/saa7134-cards.c
-+++ b/drivers/media/pci/saa7134/saa7134-cards.c
-@@ -5790,6 +5790,29 @@ struct saa7134_board saa7134_boards[] = {
- .gpio = 0x6010000,
- } },
- },
-+ [SAA7134_BOARD_WIS_VOYAGER] = {
-+ .name = "WIS Voyager or compatible",
-+ .audio_clock = 0x00200000,
-+ .tuner_type = TUNER_PHILIPS_TDA8290,
-+ .radio_type = UNSET,
-+ .tuner_addr = ADDR_UNSET,
-+ .radio_addr = ADDR_UNSET,
-+ .mpeg = SAA7134_MPEG_GO7007,
-+ .inputs = { {
-+ .name = name_comp1,
-+ .vmux = 0,
-+ .amux = LINE2,
-+ }, {
-+ .name = name_tv,
-+ .vmux = 3,
-+ .amux = TV,
-+ .tv = 1,
-+ }, {
-+ .name = name_svideo,
-+ .vmux = 6,
-+ .amux = LINE1,
-+ } },
-+ },
-
- };
-
-@@ -7037,6 +7060,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
- .subdevice = 0x0911,
- .driver_data = SAA7134_BOARD_SENSORAY811_911,
- }, {
-+ .vendor = PCI_VENDOR_ID_PHILIPS,
-+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
-+ .subvendor = 0x1905, /* WIS */
-+ .subdevice = 0x7007,
-+ .driver_data = SAA7134_BOARD_WIS_VOYAGER,
-+ }, {
- /* --- boards without eeprom + subsystem ID --- */
- .vendor = PCI_VENDOR_ID_PHILIPS,
- .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
-diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c
-index 8fd24e7..0a849ea 100644
---- a/drivers/media/pci/saa7134/saa7134-core.c
-+++ b/drivers/media/pci/saa7134/saa7134-core.c
-@@ -156,6 +156,8 @@ static void request_module_async(struct work_struct *work){
- request_module("saa7134-empress");
- if (card_is_dvb(dev))
- request_module("saa7134-dvb");
-+ if (card_is_go7007(dev))
-+ request_module("saa7134-go7007");
- if (alsa) {
- if (dev->pci->device != PCI_DEVICE_ID_PHILIPS_SAA7130)
- request_module("saa7134-alsa");
-@@ -557,8 +559,12 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id)
- saa7134_irq_vbi_done(dev,status);
-
- if ((report & SAA7134_IRQ_REPORT_DONE_RA2) &&
-- card_has_mpeg(dev))
-- saa7134_irq_ts_done(dev,status);
-+ card_has_mpeg(dev)) {
-+ if (dev->mops->irq_ts_done != NULL)
-+ dev->mops->irq_ts_done(dev, status);
-+ else
-+ saa7134_irq_ts_done(dev, status);
-+ }
-
- if (report & SAA7134_IRQ_REPORT_GPIO16) {
- switch (dev->has_remote) {
-diff --git a/drivers/media/pci/saa7134/saa7134.h b/drivers/media/pci/saa7134/saa7134.h
-index 62169dd..5fad39a 100644
---- a/drivers/media/pci/saa7134/saa7134.h
-+++ b/drivers/media/pci/saa7134/saa7134.h
-@@ -334,6 +334,7 @@ struct saa7134_card_ir {
- #define SAA7134_BOARD_KWORLD_PC150U 189
- #define SAA7134_BOARD_ASUSTeK_PS3_100 190
- #define SAA7134_BOARD_HAWELL_HW_9004V1 191
-+#define SAA7134_BOARD_WIS_VOYAGER 192
-
- #define SAA7134_MAXBOARDS 32
- #define SAA7134_INPUT_MAX 8
-@@ -364,6 +365,7 @@ enum saa7134_mpeg_type {
- SAA7134_MPEG_UNUSED,
- SAA7134_MPEG_EMPRESS,
- SAA7134_MPEG_DVB,
-+ SAA7134_MPEG_GO7007,
- };
-
- enum saa7134_mpeg_ts_type {
-@@ -403,6 +405,7 @@ struct saa7134_board {
- #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name)
- #define card_is_empress(dev) (SAA7134_MPEG_EMPRESS == saa7134_boards[dev->board].mpeg)
- #define card_is_dvb(dev) (SAA7134_MPEG_DVB == saa7134_boards[dev->board].mpeg)
-+#define card_is_go7007(dev) (SAA7134_MPEG_GO7007 == saa7134_boards[dev->board].mpeg)
- #define card_has_mpeg(dev) (SAA7134_MPEG_UNUSED != saa7134_boards[dev->board].mpeg)
- #define card(dev) (saa7134_boards[dev->board])
- #define card_in(dev,n) (saa7134_boards[dev->board].inputs[n])
-@@ -535,6 +538,8 @@ struct saa7134_mpeg_ops {
- int (*init)(struct saa7134_dev *dev);
- int (*fini)(struct saa7134_dev *dev);
- void (*signal_change)(struct saa7134_dev *dev);
-+ void (*irq_ts_done)(struct saa7134_dev *dev,
-+ unsigned long status);
- };
-
- /* global device status */
-diff --git a/drivers/staging/media/go7007/Makefile b/drivers/staging/media/go7007/Makefile
-index 9c6ad4a..1b23689 100644
---- a/drivers/staging/media/go7007/Makefile
-+++ b/drivers/staging/media/go7007/Makefile
-@@ -8,8 +8,7 @@ go7007-y := go7007-v4l2.o go7007-driver.o go7007-i2c.o go7007-fw.o \
-
- s2250-y := s2250-board.o
-
--# Uncomment when the saa7134 patches get into upstream
--#obj-$(CONFIG_VIDEO_SAA7134) += saa7134-go7007.o
--#ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/pci/saa7134
-+obj-$(CONFIG_VIDEO_SAA7134) += saa7134-go7007.o
-+ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/pci/saa7134
-
- ccflags-$(CONFIG_VIDEO_GO7007_LOADER:m=y) += -Idrivers/media/common
+++ /dev/null
-This is a driver for the WIS GO7007SB multi-format video encoder.
-
-Pete Eberlein <pete@sensoray.com>
-
-The driver was originally released under the GPL and is currently hosted at:
-http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
-The go7007 firmware can be acquired from the package on the site above.
-
-I've modified the driver to support the following Video4Linux2 MPEG
-controls, with acceptable values:
-
-V4L2_CID_MPEG_STREAM_TYPE V4L2_MPEG_STREAM_TYPE_MPEG2_DVD
- V4L2_MPEG_STREAM_TYPE_MPEG_ELEM
-V4L2_CID_MPEG_VIDEO_ENCODING V4L2_MPEG_VIDEO_ENCODING_MPEG_1
- V4L2_MPEG_VIDEO_ENCODING_MPEG_2
- V4L2_MPEG_VIDEO_ENCODING_MPEG_4
-V4L2_CID_MPEG_VIDEO_ASPECT V4L2_MPEG_VIDEO_ASPECT_1x1
- V4L2_MPEG_VIDEO_ASPECT_4x3
- V4L2_MPEG_VIDEO_ASPECT_16x9
-V4L2_CID_MPEG_VIDEO_GOP_SIZE integer
-V4L2_CID_MPEG_VIDEO_BITRATE 64000 .. 10000000
-
-These should be used instead of the non-standard GO7007 ioctls described
-below.
-
-
-The README files from the orignal package appear below:
-
----------------------------------------------------------------------------
- WIS GO7007SB Public Linux Driver
----------------------------------------------------------------------------
-
-
-*** Please see the file RELEASE-NOTES for important last-minute updates ***
-
-
- 0. OVERVIEW AND LICENSING/DISCLAIMER
-
-
-This driver kit contains Linux drivers for the WIS GO7007SB multi-format
-video encoder. Only kernel version 2.6.x is supported. The video stream
-is available through the Video4Linux2 API and the audio stream is available
-through the ALSA API (or the OSS emulation layer of the ALSA system).
-
-The files in kernel/ and hotplug/ are licensed under the GNU General Public
-License Version 2 from the Free Software Foundation. A copy of the license
-is included in the file COPYING.
-
-The example applications in apps/ and C header files in include/ are
-licensed under a permissive license included in the source files which
-allows copying, modification and redistribution for any purpose without
-attribution.
-
-The firmware files included in the firmware/ directory may be freely
-redistributed only in conjunction with this document; but modification,
-tampering and reverse engineering are prohibited.
-
-MICRONAS USA, INC., MAKES NO WARRANTIES TO ANY PERSON OR ENTITY WITH
-RESPECT TO THE SOFTWARE OR ANY DERIVATIVES THEREOF OR ANY SERVICES OR
-LICENSES AND DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
-WARRANTIES OF MERCHANTABILITY, SUPPORT, AND FITNESS FOR A PARTICULAR
-PURPOSE AND NON-INFRINGEMENT.
-
-
- 1. SYSTEM REQUIREMENTS
-
-
-This driver requires Linux kernel 2.6. Kernel 2.4 is not supported. Using
-kernel 2.6.10 or later is recommended, as earlier kernels are known to have
-unstable USB 2.0 support.
-
-A fully built kernel source tree must be available. Typically this will be
-linked from "/lib/modules/<KERNEL VERSION>/build" for convenience. If this
-link does not exist, an extra parameter will need to be passed to the
-`make` command.
-
-All vendor-built kernels should already be configured properly. However,
-for custom-built kernels, the following options need to be enabled in the
-kernel as built-in or modules:
-
- CONFIG_MODULES - Enable loadable module support
- CONFIG_FW_LOADER - Hotplug firmware loading support
- CONFIG_I2C - I2C support
- CONFIG_VIDEO_DEV - Video For Linux
- CONFIG_SOUND - Sound card support
- CONFIG_SND - Advanced Linux Sound Architecture
- CONFIG_USB - Support for Host-side USB
- CONFIG_USB_EHCI_HCD - EHCI HCD (USB 2.0) support
-
-Additionally, to use the example application, the following options need to
-be enabled in the ALSA section:
-
- CONFIG_SND_MIXER_OSS - OSS Mixer API
- CONFIG_SND_PCM_OSS - OSS PCM (digital audio) API
-
-The hotplug scripts, along with the fxload utility, must also be installed.
-These scripts can be obtained from <http://linux-hotplug.sourceforge.net/>.
-Hotplugging is used for loading firmware into the Cypruss EZ-USB chip using
-fxload and for loading firmware into the driver using the firmware agent.
-
-
- 2. COMPILING AND INSTALLING THE DRIVER
-
-
-Most users should be able to compile the driver by simply running:
-
- $ make
-
-in the top-level directory of the driver kit. First the kernel modules
-will be built, followed by the example applications.
-
-If the build system is unable to locate the kernel source tree for the
-currently-running kernel, or if the module should be built for a kernel
-other than the currently-running kernel, an additional parameter will need
-to be passed to make to specify the appropriate kernel source directory:
-
- $ make KERNELSRC=/usr/src/linux-2.6.10-custom3
-
-Once the compile completes, the driver and firmware files should be
-installed by running:
-
- $ make install
-
-The kernel modules will be placed in "/lib/modules/<KERNEL VERSION>/extra"
-and the firmware files will be placed in the appropriate hotplug firmware
-directory, usually /lib/firmware. In addition, USB maps and scripts will
-be placed in /etc/hotplug/usb to enable fxload to initialize the EZ-USB
-control chip when the device is connected.
-
-
- 3. PAL/SECAM TUNER CONFIGURATION (TV402U-EU only)
-
-
-The PAL model of the Plextor ConvertX TV402U may require additional
-configuration to correctly select the appropriate TV frequency band and
-audio subchannel.
-
-Users with a device other than the Plextor ConvertX TV402U-EU should skip
-this section.
-
-The wide variety of PAL TV systems used in Europe requires that additional
-information about the local TV standards be passed to the driver in order
-to properly tune TV channels. The two necessary parameters are (a) the PAL
-TV band, and (b) the audio subchannel format in use.
-
-In many cases, the appropriate TV band selection is passed to the driver
-from applications. However, in some cases, the application only specifies
-that the driver should use PAL but not the specific information about the
-appropriate TV band. To work around this issue, the correct TV band may be
-specified in the "force_band" parameter to the wis-sony-tuner module:
-
- TV band force_band
- ------- ----------
- PAL B/G B
- PAL I I
- PAL D/K D
- SECAM L L
-
-If the "force_band" parameter is specified, the driver will ignore any TV
-band specified by applications and will always use the band provided in the
-module parameter.
-
-The other parameter that can be specified is the audio subchannel format.
-There are several stereo audio carrier systems in use, including NICAM and
-three varieties of A2. To receive audio broadcast on one of these stereo
-carriers, the "force_mpx_mode" parameter must be specified to the
-wis-sony-tuner module.
-
- TV band Audio subcarrier force_mpx_mode
- ------- ---------------- --------------
- PAL B/G Mono (default) 1
- PAL B/G A2 2
- PAL B/G NICAM 3
- PAL I Mono (default) 4
- PAL I NICAM 5
- PAL D/K Mono (default) 6
- PAL D/K A2 (1) 7
- PAL D/K A2 (2) 8
- PAL D/K A2 (3) 9
- PAL D/K NICAM 10
- SECAM L Mono (default) 11
- SECAM L NICAM 12
-
-If the "force_mpx_mode" parameter is not specified, the correct mono-only
-mode will be chosen based on the TV band. However, the tuner will not
-receive stereo audio or bilingual broadcasts correctly.
-
-To pass the "force_band" or "force_mpx_mode" parameters to the
-wis-sony-tuner module, the following line must be added to the modprobe
-configuration file, which varies from one Linux distribution to another.
-
- options wis-sony-tuner force_band=B force_mpx_mode=2
-
-The above example would force the tuner to the PAL B/G TV band and receive
-stereo audio broadcasts on the A2 carrier.
-
-To verify that the configuration has been placed in the correct location,
-execute:
-
- $ modprobe -c | grep wis-sony-tuner
-
-If the configuration line appears, then modprobe will pass the parameters
-correctly the next time the wis-sony-tuner module is loaded into the
-kernel.
-
-
- 4. TESTING THE DRIVER
-
-
-Because few Linux applications are able to correctly capture from
-Video4Linux2 devices with only compressed formats supported, the new driver
-should be tested with the "gorecord" application in the apps/ directory.
-
-First connect a video source to the device, such as a DVD player or VCR.
-This will be captured to a file for testing the driver. If an input source
-is unavailable, a test file can still be captured, but the video will be
-black and the audio will be silent.
-
-This application will auto-detect the V4L2 and ALSA/OSS device names of the
-hardware and will record video and audio to an AVI file for a specified
-number of seconds. For example:
-
- $ apps/gorecord -duration 60 capture.avi
-
-If this application does not successfully record an AVI file, the error
-messages produced by gorecord and recorded in the system log (usually in
-/var/log/messages) should provide information to help resolve the problem.
-
-Supplying no parameters to gorecord will cause it to probe the available
-devices and exit. Use the -help flag for usage information.
-
-
- 5. USING THE DRIVER
-
-
-The V4L2 device implemented by the driver provides a standard compressed
-format API, within the following criteria:
-
- * Applications that only support the original Video4Linux1 API will not
- be able to communicate with this driver at all.
-
- * No raw video modes are supported, so applications like xawtv that
- expect only uncompressed video will not function.
-
- * Supported compression formats are: Motion-JPEG, MPEG1, MPEG2 and MPEG4.
-
- * MPEG video formats are delivered as Video Elementary Streams only.
- Program Stream (PS), Transport Stream (TS) and Packetized Elementary
- Stream (PES) formats are not supported.
-
- * Video parameters such as format and input port may not be changed while
- the encoder is active.
-
- * The audio capture device only functions when the video encoder is
- actively capturing video. Attempts to read from the audio device when
- the encoder is inactive will result in an I/O error.
-
- * The native format of the audio device is 48Khz 2-channel 16-bit
- little-endian PCM, delivered through the ALSA system. No audio
- compression is implemented in the hardware. ALSA may convert to other
- uncompressed formats on the fly.
-
-The include/ directory contains a C header file describing non-standard
-features of the GO7007SB encoder, which are described below:
-
-
- GO7007IOC_S_COMP_PARAMS, GO7007IOC_G_COMP_PARAMS
-
- These ioctls are used to negotiate general compression parameters.
-
- To query the current parameters, call the GO7007IOC_G_COMP_PARAMS ioctl
- with a pointer to a struct go7007_comp_params. If the driver is not
- set to MPEG format, the EINVAL error code will be returned.
-
- To change the current parameters, initialize all fields of a struct
- go7007_comp_params and call the GO7007_IOC_S_COMP_PARAMS ioctl with a
- pointer to this structure. The driver will return the current
- parameters with any necessary changes to conform to the limitations of
- the hardware or current compression mode. Any or all fields can be set
- to zero to request a reasonable default value. If the driver is not
- set to MPEG format, the EINVAL error code will be returned. When I/O
- is in progress, the EBUSY error code will be returned.
-
- Fields in struct go7007_comp_params:
-
- __u32 The maximum number of frames in each
- gop_size Group Of Pictures; i.e. the maximum
- number of frames minus one between
- each key frame.
-
- __u32 The maximum number of sequential
- max_b_frames bidirectionally-predicted frames.
- (B-frames are not yet supported.)
-
- enum go7007_aspect_ratio The aspect ratio to be encoded in the
- aspect_ratio meta-data of the compressed format.
-
- Choices are:
- GO7007_ASPECT_RATIO_1_1
- GO7007_ASPECT_RATIO_4_3_NTSC
- GO7007_ASPECT_RATIO_4_3_PAL
- GO7007_ASPECT_RATIO_16_9_NTSC
- GO7007_ASPECT_RATIO_16_9_PAL
-
- __u32 Bit-wise OR of control flags (below)
- flags
-
- Flags in struct go7007_comp_params:
-
- GO7007_COMP_CLOSED_GOP Only produce self-contained GOPs, used
- to produce streams appropriate for
- random seeking.
-
- GO7007_COMP_OMIT_SEQ_HEADER Omit the stream sequence header.
-
-
- GO7007IOC_S_MPEG_PARAMS, GO7007IOC_G_MPEG_PARAMS
-
- These ioctls are used to negotiate MPEG-specific stream parameters when
- the pixelformat has been set to V4L2_PIX_FMT_MPEG.
-
- To query the current parameters, call the GO7007IOC_G_MPEG_PARAMS ioctl
- with a pointer to a struct go7007_mpeg_params. If the driver is not
- set to MPEG format, the EINVAL error code will be returned.
-
- To change the current parameters, initialize all fields of a struct
- go7007_mpeg_params and call the GO7007_IOC_S_MPEG_PARAMS ioctl with a
- pointer to this structure. The driver will return the current
- parameters with any necessary changes to conform to the limitations of
- the hardware or selected MPEG mode. Any or all fields can be set to
- zero to request a reasonable default value. If the driver is not set
- to MPEG format, the EINVAL error code will be returned. When I/O is in
- progress, the EBUSY error code will be returned.
-
- Fields in struct go7007_mpeg_params:
-
- enum go7007_mpeg_video_standard
- mpeg_video_standard The MPEG video standard in which to
- compress the video.
-
- Choices are:
- GO7007_MPEG_VIDEO_MPEG1
- GO7007_MPEG_VIDEO_MPEG2
- GO7007_MPEG_VIDEO_MPEG4
-
- __u32 Bit-wise OR of control flags (below)
- flags
-
- __u32 The profile and level indication to be
- pali stored in the sequence header. This
- is only used as an indicator to the
- decoder, and does not affect the MPEG
- features used in the video stream.
- Not valid for MPEG1.
-
- Choices for MPEG2 are:
- GO7007_MPEG2_PROFILE_MAIN_MAIN
-
- Choices for MPEG4 are:
- GO7007_MPEG4_PROFILE_S_L0
- GO7007_MPEG4_PROFILE_S_L1
- GO7007_MPEG4_PROFILE_S_L2
- GO7007_MPEG4_PROFILE_S_L3
- GO7007_MPEG4_PROFILE_ARTS_L1
- GO7007_MPEG4_PROFILE_ARTS_L2
- GO7007_MPEG4_PROFILE_ARTS_L3
- GO7007_MPEG4_PROFILE_ARTS_L4
- GO7007_MPEG4_PROFILE_AS_L0
- GO7007_MPEG4_PROFILE_AS_L1
- GO7007_MPEG4_PROFILE_AS_L2
- GO7007_MPEG4_PROFILE_AS_L3
- GO7007_MPEG4_PROFILE_AS_L4
- GO7007_MPEG4_PROFILE_AS_L5
-
- Flags in struct go7007_mpeg_params:
-
- GO7007_MPEG_FORCE_DVD_MODE Force all compression parameters and
- bitrate control settings to comply
- with DVD MPEG2 stream requirements.
- This overrides most compression and
- bitrate settings!
-
- GO7007_MPEG_OMIT_GOP_HEADER Omit the GOP header.
-
- GO7007_MPEG_REPEAT_SEQHEADER Repeat the MPEG sequence header at
- the start of each GOP.
-
-
- GO7007IOC_S_BITRATE, GO7007IOC_G_BITRATE
-
- These ioctls are used to set and query the target bitrate value for the
- compressed video stream. The bitrate may be selected by storing the
- target bits per second in an int and calling GO7007IOC_S_BITRATE with a
- pointer to the int. The bitrate may be queried by calling
- GO7007IOC_G_BITRATE with a pointer to an int where the current bitrate
- will be stored.
-
- Note that this is the primary means of controlling the video quality
- for all compression modes, including V4L2_PIX_FMT_MJPEG. The
- VIDIOC_S_JPEGCOMP ioctl is not supported.
-
-
-----------------------------------------------------------------------------
- Installing the WIS PCI Voyager Driver
----------------------------------------------------------------------------
-
-The WIS PCI Voyager driver requires several patches to the Linux 2.6.11.x
-kernel source tree before compiling the driver. These patches update the
-in-kernel SAA7134 driver to the newest development version and patch bugs
-in the TDA8290/TDA8275 tuner driver.
-
-The following patches must be downloaded from Gerd Knorr's website and
-applied in the order listed:
-
- http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner
- http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner2
- http://dl.bytesex.org/patches/2.6.11-2/v4l2-api-mpeg
- http://dl.bytesex.org/patches/2.6.11-2/saa7134-update
-
-The following patches are included with this SDK and can be applied in any
-order:
-
- patches/2.6.11/saa7134-voyager.diff
- patches/2.6.11/tda8275-newaddr.diff
- patches/2.6.11/tda8290-ntsc.diff
-
-Check to make sure the CONFIG_VIDEO_SAA7134 option is enabled in the kernel
-configuration, and build and install the kernel.
-
-After rebooting into the new kernel, the GO7007 driver can be compiled and
-installed:
-
- $ make SAA7134_BUILD=y
- $ make install
- $ modprobe saa7134-go7007
-
-There will be two V4L video devices associated with the PCI Voyager. The
-first device (most likely /dev/video0) provides access to the raw video
-capture mode of the SAA7133 device and is used to configure the source
-video parameters and tune the TV tuner. This device can be used with xawtv
-or other V4L(2) video software as a standard uncompressed device.
-
-The second device (most likely /dev/video1) provides access to the
-compression functions of the GO7007. It can be tested using the gorecord
-application in the apps/ directory of this SDK:
-
- $ apps/gorecord -vdevice /dev/video1 -noaudio test.avi
-
-Currently the frame resolution is fixed at 720x480 (NTSC) or 720x576 (PAL),
-and the video standard must be specified to both the raw and the compressed
-video devices (xawtv and gorecord, for example).
-
-
---------------------------------------------------------------------------
-RELEASE NOTES FOR WIS GO7007SB LINUX DRIVER
----------------------------------------------------------------------------
-
-Last updated: 5 November 2005
-
- - Release 0.9.7 includes new support for using udev to run fxload. The
- install script should automatically detect whether the old hotplug
- scripts or the new udev rules should be used. To force the use of
- hotplug, run "make install USE_UDEV=n". To force the use of udev, run
- "make install USE_UDEV=y".
-
- - Motion detection is supported but undocumented. Try the `modet` app
- for a demonstration of how to use the facility.
-
- - Using USB2.0 devices such as the TV402U with USB1.1 HCDs or hubs can
- cause buffer overruns and frame drops, even at low framerates, due to
- inconsistency in the bitrate control mechanism.
-
- - On devices with an SAA7115, including the Plextor ConvertX, video height
- values of 96, 128, 160, 192, 256, 320, and 384 do not work in NTSC mode.
- All valid heights up to 512 work correctly in PAL mode.
-
- - The WIS Star Trek and PCI Voyager boards have no support yet for audio
- or the TV tuner.
+++ /dev/null
-/*
- * Copyright (C) 2005-2006 Micronas USA Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/mm.h>
-#include <linux/usb.h>
-#include <linux/i2c.h>
-#include <asm/byteorder.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "saa7134.h"
-#include "saa7134-reg.h"
-#include "go7007-priv.h"
-
-/*#define GO7007_HPI_DEBUG*/
-
-enum hpi_address {
- HPI_ADDR_VIDEO_BUFFER = 0xe4,
- HPI_ADDR_INIT_BUFFER = 0xea,
- HPI_ADDR_INTR_RET_VALUE = 0xee,
- HPI_ADDR_INTR_RET_DATA = 0xec,
- HPI_ADDR_INTR_STATUS = 0xf4,
- HPI_ADDR_INTR_WR_PARAM = 0xf6,
- HPI_ADDR_INTR_WR_INDEX = 0xf8,
-};
-
-enum gpio_command {
- GPIO_COMMAND_RESET = 0x00, /* 000b */
- GPIO_COMMAND_REQ1 = 0x04, /* 001b */
- GPIO_COMMAND_WRITE = 0x20, /* 010b */
- GPIO_COMMAND_REQ2 = 0x24, /* 011b */
- GPIO_COMMAND_READ = 0x80, /* 100b */
- GPIO_COMMAND_VIDEO = 0x84, /* 101b */
- GPIO_COMMAND_IDLE = 0xA0, /* 110b */
- GPIO_COMMAND_ADDR = 0xA4, /* 111b */
-};
-
-struct saa7134_go7007 {
- struct v4l2_subdev sd;
- struct saa7134_dev *dev;
- u8 *top;
- u8 *bottom;
- dma_addr_t top_dma;
- dma_addr_t bottom_dma;
-};
-
-static inline struct saa7134_go7007 *to_state(struct v4l2_subdev *sd)
-{
- return container_of(sd, struct saa7134_go7007, sd);
-}
-
-static const struct go7007_board_info board_voyager = {
- .flags = 0,
- .sensor_flags = GO7007_SENSOR_656 |
- GO7007_SENSOR_VALID_ENABLE |
- GO7007_SENSOR_TV |
- GO7007_SENSOR_VBI,
- .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
- GO7007_AUDIO_WORD_16,
- .audio_rate = 48000,
- .audio_bclk_div = 8,
- .audio_main_div = 2,
- .hpi_buffer_cap = 7,
- .num_inputs = 1,
- .inputs = {
- {
- .name = "SAA7134",
- },
- },
-};
-
-/********************* Driver for GPIO HPI interface *********************/
-
-static int gpio_write(struct saa7134_dev *dev, u8 addr, u16 data)
-{
- saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
-
- /* Write HPI address */
- saa_writeb(SAA7134_GPIO_GPSTATUS0, addr);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
-
- /* Write low byte */
- saa_writeb(SAA7134_GPIO_GPSTATUS0, data & 0xff);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
-
- /* Write high byte */
- saa_writeb(SAA7134_GPIO_GPSTATUS0, data >> 8);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
-
- return 0;
-}
-
-static int gpio_read(struct saa7134_dev *dev, u8 addr, u16 *data)
-{
- saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
-
- /* Write HPI address */
- saa_writeb(SAA7134_GPIO_GPSTATUS0, addr);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
-
- saa_writeb(SAA7134_GPIO_GPMODE0, 0x00);
-
- /* Read low byte */
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_READ);
- saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
- saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
- *data = saa_readb(SAA7134_GPIO_GPSTATUS0);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
-
- /* Read high byte */
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_READ);
- saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
- saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
- *data |= saa_readb(SAA7134_GPIO_GPSTATUS0) << 8;
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
-
- return 0;
-}
-
-static int saa7134_go7007_interface_reset(struct go7007 *go)
-{
- struct saa7134_go7007 *saa = go->hpi_context;
- struct saa7134_dev *dev = saa->dev;
- u32 status;
- u16 intr_val, intr_data;
- int count = 20;
-
- saa_clearb(SAA7134_TS_PARALLEL, 0x80); /* Disable TS interface */
- saa_writeb(SAA7134_GPIO_GPMODE2, 0xa4);
- saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
-
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_RESET);
- msleep(1);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ2);
- msleep(10);
-
- saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
- saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-
- status = saa_readb(SAA7134_GPIO_GPSTATUS2);
- /*pr_debug("status is %s\n", status & 0x40 ? "OK" : "not OK"); */
-
- /* enter command mode...(?) */
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ2);
-
- do {
- saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
- saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
- status = saa_readb(SAA7134_GPIO_GPSTATUS2);
- /*pr_info("gpio is %08x\n", saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)); */
- } while (--count > 0);
-
- /* Wait for an interrupt to indicate successful hardware reset */
- if (go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
- (intr_val & ~0x1) != 0x55aa) {
- pr_err("saa7134-go7007: unable to reset the GO7007\n");
- return -1;
- }
- return 0;
-}
-
-static int saa7134_go7007_write_interrupt(struct go7007 *go, int addr, int data)
-{
- struct saa7134_go7007 *saa = go->hpi_context;
- struct saa7134_dev *dev = saa->dev;
- int i;
- u16 status_reg;
-
-#ifdef GO7007_HPI_DEBUG
- pr_debug("saa7134-go7007: WriteInterrupt: %04x %04x\n", addr, data);
-#endif
-
- for (i = 0; i < 100; ++i) {
- gpio_read(dev, HPI_ADDR_INTR_STATUS, &status_reg);
- if (!(status_reg & 0x0010))
- break;
- msleep(10);
- }
- if (i == 100) {
- pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n",
- status_reg);
- return -1;
- }
- gpio_write(dev, HPI_ADDR_INTR_WR_PARAM, data);
- gpio_write(dev, HPI_ADDR_INTR_WR_INDEX, addr);
-
- return 0;
-}
-
-static int saa7134_go7007_read_interrupt(struct go7007 *go)
-{
- struct saa7134_go7007 *saa = go->hpi_context;
- struct saa7134_dev *dev = saa->dev;
-
- /* XXX we need to wait if there is no interrupt available */
- go->interrupt_available = 1;
- gpio_read(dev, HPI_ADDR_INTR_RET_VALUE, &go->interrupt_value);
- gpio_read(dev, HPI_ADDR_INTR_RET_DATA, &go->interrupt_data);
-#ifdef GO7007_HPI_DEBUG
- pr_debug("saa7134-go7007: ReadInterrupt: %04x %04x\n",
- go->interrupt_value, go->interrupt_data);
-#endif
- return 0;
-}
-
-static void saa7134_go7007_irq_ts_done(struct saa7134_dev *dev,
- unsigned long status)
-{
- struct go7007 *go = video_get_drvdata(dev->empress_dev);
- struct saa7134_go7007 *saa = go->hpi_context;
-
- if (!vb2_is_streaming(&go->vidq))
- return;
- if (0 != (status & 0x000f0000))
- pr_debug("saa7134-go7007: irq: lost %ld\n",
- (status >> 16) & 0x0f);
- if (status & 0x100000) {
- dma_sync_single_for_cpu(&dev->pci->dev,
- saa->bottom_dma, PAGE_SIZE, DMA_FROM_DEVICE);
- go7007_parse_video_stream(go, saa->bottom, PAGE_SIZE);
- saa_writel(SAA7134_RS_BA2(5), cpu_to_le32(saa->bottom_dma));
- } else {
- dma_sync_single_for_cpu(&dev->pci->dev,
- saa->top_dma, PAGE_SIZE, DMA_FROM_DEVICE);
- go7007_parse_video_stream(go, saa->top, PAGE_SIZE);
- saa_writel(SAA7134_RS_BA1(5), cpu_to_le32(saa->top_dma));
- }
-}
-
-static int saa7134_go7007_stream_start(struct go7007 *go)
-{
- struct saa7134_go7007 *saa = go->hpi_context;
- struct saa7134_dev *dev = saa->dev;
-
- saa->top_dma = dma_map_page(&dev->pci->dev, virt_to_page(saa->top),
- 0, PAGE_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(&dev->pci->dev, saa->top_dma))
- return -ENOMEM;
- saa->bottom_dma = dma_map_page(&dev->pci->dev,
- virt_to_page(saa->bottom),
- 0, PAGE_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(&dev->pci->dev, saa->bottom_dma)) {
- dma_unmap_page(&dev->pci->dev, saa->top_dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
- return -ENOMEM;
- }
-
- saa_writel(SAA7134_VIDEO_PORT_CTRL0 >> 2, 0xA300B000);
- saa_writel(SAA7134_VIDEO_PORT_CTRL4 >> 2, 0x40000200);
-
- /* Set HPI interface for video */
- saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
- saa_writeb(SAA7134_GPIO_GPSTATUS0, HPI_ADDR_VIDEO_BUFFER);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
- saa_writeb(SAA7134_GPIO_GPMODE0, 0x00);
-
- /* Enable TS interface */
- saa_writeb(SAA7134_TS_PARALLEL, 0xe6);
-
- /* Reset TS interface */
- saa_setb(SAA7134_TS_SERIAL1, 0x01);
- saa_clearb(SAA7134_TS_SERIAL1, 0x01);
-
- /* Set up transfer block size */
- saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 128 - 1);
- saa_writeb(SAA7134_TS_DMA0, (PAGE_SIZE >> 7) - 1);
- saa_writeb(SAA7134_TS_DMA1, 0);
- saa_writeb(SAA7134_TS_DMA2, 0);
-
- /* Enable video streaming mode */
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_VIDEO);
-
- saa_writel(SAA7134_RS_BA1(5), cpu_to_le32(saa->top_dma));
- saa_writel(SAA7134_RS_BA2(5), cpu_to_le32(saa->bottom_dma));
- saa_writel(SAA7134_RS_PITCH(5), 128);
- saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_MAX);
-
- /* Enable TS FIFO */
- saa_setl(SAA7134_MAIN_CTRL, SAA7134_MAIN_CTRL_TE5);
-
- /* Enable DMA IRQ */
- saa_setl(SAA7134_IRQ1,
- SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0);
-
- return 0;
-}
-
-static int saa7134_go7007_stream_stop(struct go7007 *go)
-{
- struct saa7134_go7007 *saa = go->hpi_context;
- struct saa7134_dev *dev;
-
- if (!saa)
- return -EINVAL;
- dev = saa->dev;
- if (!dev)
- return -EINVAL;
-
- /* Shut down TS FIFO */
- saa_clearl(SAA7134_MAIN_CTRL, SAA7134_MAIN_CTRL_TE5);
-
- /* Disable DMA IRQ */
- saa_clearl(SAA7134_IRQ1,
- SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0);
-
- /* Disable TS interface */
- saa_clearb(SAA7134_TS_PARALLEL, 0x80);
-
- dma_unmap_page(&dev->pci->dev, saa->top_dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
- dma_unmap_page(&dev->pci->dev, saa->bottom_dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
-
- return 0;
-}
-
-static int saa7134_go7007_send_firmware(struct go7007 *go, u8 *data, int len)
-{
- struct saa7134_go7007 *saa = go->hpi_context;
- struct saa7134_dev *dev = saa->dev;
- u16 status_reg;
- int i;
-
-#ifdef GO7007_HPI_DEBUG
- pr_debug("saa7134-go7007: DownloadBuffer sending %d bytes\n", len);
-#endif
-
- while (len > 0) {
- i = len > 64 ? 64 : len;
- saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
- saa_writeb(SAA7134_GPIO_GPSTATUS0, HPI_ADDR_INIT_BUFFER);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
- while (i-- > 0) {
- saa_writeb(SAA7134_GPIO_GPSTATUS0, *data);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE);
- saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
- ++data;
- --len;
- }
- for (i = 0; i < 100; ++i) {
- gpio_read(dev, HPI_ADDR_INTR_STATUS, &status_reg);
- if (!(status_reg & 0x0002))
- break;
- }
- if (i == 100) {
- pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n",
- status_reg);
- return -1;
- }
- }
- return 0;
-}
-
-static struct go7007_hpi_ops saa7134_go7007_hpi_ops = {
- .interface_reset = saa7134_go7007_interface_reset,
- .write_interrupt = saa7134_go7007_write_interrupt,
- .read_interrupt = saa7134_go7007_read_interrupt,
- .stream_start = saa7134_go7007_stream_start,
- .stream_stop = saa7134_go7007_stream_stop,
- .send_firmware = saa7134_go7007_send_firmware,
-};
-MODULE_FIRMWARE("go7007/go7007tv.bin");
-
-/* --------------------------------------------------------------------------*/
-
-static int saa7134_go7007_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
-{
- struct saa7134_go7007 *saa = to_state(sd);
- struct saa7134_dev *dev = saa->dev;
-
- return saa7134_s_std_internal(dev, NULL, norm);
-}
-
-static int saa7134_go7007_queryctrl(struct v4l2_subdev *sd,
- struct v4l2_queryctrl *query)
-{
- return saa7134_queryctrl(NULL, NULL, query);
-}
-static int saa7134_go7007_s_ctrl(struct v4l2_subdev *sd,
- struct v4l2_control *ctrl)
-{
- struct saa7134_go7007 *saa = to_state(sd);
- struct saa7134_dev *dev = saa->dev;
-
- return saa7134_s_ctrl_internal(dev, NULL, ctrl);
-}
-
-static int saa7134_go7007_g_ctrl(struct v4l2_subdev *sd,
- struct v4l2_control *ctrl)
-{
- struct saa7134_go7007 *saa = to_state(sd);
- struct saa7134_dev *dev = saa->dev;
-
- return saa7134_g_ctrl_internal(dev, NULL, ctrl);
-}
-
-/* --------------------------------------------------------------------------*/
-
-static const struct v4l2_subdev_core_ops saa7134_go7007_core_ops = {
- .g_ctrl = saa7134_go7007_g_ctrl,
- .s_ctrl = saa7134_go7007_s_ctrl,
- .queryctrl = saa7134_go7007_queryctrl,
-};
-
-static const struct v4l2_subdev_video_ops saa7134_go7007_video_ops = {
- .s_std = saa7134_go7007_s_std,
-};
-
-static const struct v4l2_subdev_ops saa7134_go7007_sd_ops = {
- .core = &saa7134_go7007_core_ops,
- .video = &saa7134_go7007_video_ops,
-};
-
-/* --------------------------------------------------------------------------*/
-
-
-/********************* Add/remove functions *********************/
-
-static int saa7134_go7007_init(struct saa7134_dev *dev)
-{
- struct go7007 *go;
- struct saa7134_go7007 *saa;
- struct v4l2_subdev *sd;
-
- pr_debug("saa7134-go7007: probing new SAA713X board\n");
-
- go = go7007_alloc(&board_voyager, &dev->pci->dev);
- if (go == NULL)
- return -ENOMEM;
-
- saa = kzalloc(sizeof(struct saa7134_go7007), GFP_KERNEL);
- if (saa == NULL) {
- kfree(go);
- return -ENOMEM;
- }
-
- go->board_id = GO7007_BOARDID_PCI_VOYAGER;
- snprintf(go->bus_info, sizeof(go->bus_info), "PCI:%s", pci_name(dev->pci));
- strlcpy(go->name, saa7134_boards[dev->board].name, sizeof(go->name));
- go->hpi_ops = &saa7134_go7007_hpi_ops;
- go->hpi_context = saa;
- saa->dev = dev;
-
- /* Init the subdevice interface */
- sd = &saa->sd;
- v4l2_subdev_init(sd, &saa7134_go7007_sd_ops);
- v4l2_set_subdevdata(sd, saa);
- strncpy(sd->name, "saa7134-go7007", sizeof(sd->name));
-
- /* Allocate a couple pages for receiving the compressed stream */
- saa->top = (u8 *)get_zeroed_page(GFP_KERNEL);
- if (!saa->top)
- goto allocfail;
- saa->bottom = (u8 *)get_zeroed_page(GFP_KERNEL);
- if (!saa->bottom)
- goto allocfail;
-
- /* Boot the GO7007 */
- if (go7007_boot_encoder(go, go->board_info->flags &
- GO7007_BOARD_USE_ONBOARD_I2C) < 0)
- goto allocfail;
-
- /* Do any final GO7007 initialization, then register the
- * V4L2 and ALSA interfaces */
- if (go7007_register_encoder(go, go->board_info->num_i2c_devs) < 0)
- goto allocfail;
-
- /* Register the subdevice interface with the go7007 device */
- if (v4l2_device_register_subdev(&go->v4l2_dev, sd) < 0)
- pr_info("saa7134-go7007: register subdev failed\n");
-
- dev->empress_dev = &go->vdev;
-
- go->status = STATUS_ONLINE;
- return 0;
-
-allocfail:
- if (saa->top)
- free_page((unsigned long)saa->top);
- if (saa->bottom)
- free_page((unsigned long)saa->bottom);
- kfree(saa);
- kfree(go);
- return -ENOMEM;
-}
-
-static int saa7134_go7007_fini(struct saa7134_dev *dev)
-{
- struct go7007 *go;
- struct saa7134_go7007 *saa;
-
- if (NULL == dev->empress_dev)
- return 0;
-
- go = video_get_drvdata(dev->empress_dev);
- if (go->audio_enabled)
- go7007_snd_remove(go);
-
- saa = go->hpi_context;
- go->status = STATUS_SHUTDOWN;
- free_page((unsigned long)saa->top);
- free_page((unsigned long)saa->bottom);
- v4l2_device_unregister_subdev(&saa->sd);
- kfree(saa);
- video_unregister_device(&go->vdev);
-
- v4l2_device_put(&go->v4l2_dev);
- dev->empress_dev = NULL;
-
- return 0;
-}
-
-static struct saa7134_mpeg_ops saa7134_go7007_ops = {
- .type = SAA7134_MPEG_GO7007,
- .init = saa7134_go7007_init,
- .fini = saa7134_go7007_fini,
- .irq_ts_done = saa7134_go7007_irq_ts_done,
-};
-
-static int __init saa7134_go7007_mod_init(void)
-{
- return saa7134_ts_register(&saa7134_go7007_ops);
-}
-
-static void __exit saa7134_go7007_mod_cleanup(void)
-{
- saa7134_ts_unregister(&saa7134_go7007_ops);
-}
-
-module_init(saa7134_go7007_mod_init);
-module_exit(saa7134_go7007_mod_cleanup);
-
-MODULE_LICENSE("GPL v2");
projects / karo-tx-linux.git / commitdiff