Like Pierre's G94. We might want to structure Kepler similarly in a follow-up.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
{ 5, 2 }, { 7, 4 }, { 8, 5 }, { 9, 6 }, { 10, 7 },
{ 11, 0 }, { 13 , 1 },
/* the below are mentioned in some, but not all, gddr3 docs */
- { 4, 1 }, { 6, 3 }, { 12, 1 },
+ { 4, 0 }, { 6, 3 }, { 12, 1 },
{ -1 }
};
WR = (ram->next->bios.timing[2] & 0x007f0000) >> 16;
/* XXX: Get these values from the VBIOS instead */
DLL = !(ram->mr[1] & 0x1);
- ODT = (ram->mr[1] & 0x004) >> 2 |
- (ram->mr[1] & 0x040) >> 5 |
- (ram->mr[1] & 0x200) >> 7;
RON = !(ram->mr[1] & 0x300) >> 8;
break;
default:
return -ENOSYS;
}
+ if (ram->next->bios.timing_ver == 0x20 ||
+ ram->next->bios.ramcfg_timing == 0xff) {
+ ODT = (ram->mr[1] & 0xc) >> 2;
+ }
+
hi = ram->mr[2] & 0x1;
CL = ramxlat(hi ? ramgddr3_cl_hi : ramgddr3_cl_lo, CL);
WR = ramxlat(ramgddr3_wr_lo, WR);
nvkm_debug(subdev, " 240: %08x\n", timing[8]);
return 0;
}
+
+static int
+nv50_ram_timing_read(struct nv50_ram *ram, u32 *timing)
+{
+ unsigned int i;
+ struct nvbios_ramcfg *cfg = &ram->base.target.bios;
+ struct nvkm_subdev *subdev = &ram->base.fb->subdev;
+ struct nvkm_device *device = subdev->device;
+
+ for (i = 0; i <= 8; i++)
+ timing[i] = nvkm_rd32(device, 0x100220 + (i * 4));
+
+ /* Derive the bare minimum for the MR calculation to succeed */
+ cfg->timing_ver = 0x10;
+ T(CL) = (timing[3] & 0xff) + 1;
+
+ switch (ram->base.type) {
+ case NVKM_RAM_TYPE_DDR2:
+ T(CWL) = T(CL) - 1;
+ break;
+ case NVKM_RAM_TYPE_GDDR3:
+ T(CWL) = ((timing[2] & 0xff000000) >> 24) + 1;
+ break;
+ default:
+ return -ENOSYS;
+ break;
+ }
+
+ T(WR) = ((timing[1] >> 24) & 0xff) - 1 - T(CWL);
+
+ return 0;
+}
#undef T
static void
strap, data, ver, hdr);
return -EINVAL;
}
+ nv50_ram_timing_calc(ram, timing);
+ } else {
+ nv50_ram_timing_read(ram, timing);
}
- nv50_ram_timing_calc(ram, timing);
-
ret = ram_init(hwsq, subdev);
if (ret)
return ret;
break;
}
- if (ret)
+ if (ret) {
+ nvkm_error(subdev, "Could not calculate MR\n");
return ret;
+ }
/* Always disable this bit during reclock */
ram_mask(hwsq, 0x100200, 0x00000800, 0x00000000);
return -ENOSYS;
}
+ if (ram->next->bios.timing_ver == 0x20 ||
+ ram->next->bios.ramcfg_timing == 0xff) {
+ ODT = (ram->mr[1] & 0x004) >> 2 |
+ (ram->mr[1] & 0x040) >> 5;
+ }
+
CL = ramxlat(ramddr2_cl, CL);
WR = ramxlat(ramddr2_wr, WR);
if (CL < 0 || WR < 0)