]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
ASoC: cs42l73: Add Device Tree support for CS42L73
authorBrian Austin <brian.austin@cirrus.com>
Fri, 18 Oct 2013 19:30:01 +0000 (14:30 -0500)
committerMark Brown <broonie@linaro.org>
Sun, 20 Oct 2013 17:15:44 +0000 (18:15 +0100)
This patch adds support for device tree for the CS42L73 CODEC

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Documentation/devicetree/bindings/sound/cs42l73.txt [new file with mode: 0644]
sound/soc/codecs/cs42l73.c

diff --git a/Documentation/devicetree/bindings/sound/cs42l73.txt b/Documentation/devicetree/bindings/sound/cs42l73.txt
new file mode 100644 (file)
index 0000000..80ae910
--- /dev/null
@@ -0,0 +1,22 @@
+CS42L73 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l73"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - reset_gpio : a GPIO spec for the reset pin.
+  - chgfreq    : Charge Pump Frequency values 0x00-0x0F
+
+
+Example:
+
+codec: cs42l73@4a {
+       compatible = "cirrus,cs42l73";
+       reg = <0x4a>;
+       reset_gpio = <&gpio 10 0>;
+       chgfreq = <0x05>;
+};
\ No newline at end of file
index 89efc3c6aefc5e37bb7e270771619d7293ea33c4..549d5d6a3fef47f0680934c68b36a2c6a48529d0 100644 (file)
@@ -17,7 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
@@ -1416,6 +1416,7 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client,
        int ret;
        unsigned int devid = 0;
        unsigned int reg;
+       u32 val32;
 
        cs42l73 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs42l73_private),
                               GFP_KERNEL);
@@ -1431,8 +1432,25 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client,
                return ret;
        }
 
-       if (pdata)
+       if (pdata) {
                cs42l73->pdata = *pdata;
+       } else {
+               pdata = devm_kzalloc(&i2c_client->dev,
+                                    sizeof(struct cs42l73_platform_data),
+                               GFP_KERNEL);
+               if (!pdata) {
+                       dev_err(&i2c_client->dev, "could not allocate pdata\n");
+                       return -ENOMEM;
+               }
+               if (i2c_client->dev.of_node) {
+                       if (of_property_read_u32(i2c_client->dev.of_node,
+                               "chgfreq", &val32) >= 0)
+                               pdata->chgfreq = val32;
+               }
+               pdata->reset_gpio = of_get_named_gpio(i2c_client->dev.of_node,
+                                               "reset-gpio", 0);
+               cs42l73->pdata = *pdata;
+       }
 
        i2c_set_clientdata(i2c_client, cs42l73);
 
@@ -1493,6 +1511,12 @@ static int cs42l73_i2c_remove(struct i2c_client *client)
        return 0;
 }
 
+static const struct of_device_id cs42l73_of_match[] = {
+       { .compatible = "cirrus,cs42l73", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, cs42l73_of_match);
+
 static const struct i2c_device_id cs42l73_id[] = {
        {"cs42l73", 0},
        {}
@@ -1504,6 +1528,7 @@ static struct i2c_driver cs42l73_i2c_driver = {
        .driver = {
                   .name = "cs42l73",
                   .owner = THIS_MODULE,
+                  .of_match_table = cs42l73_of_match,
                   },
        .id_table = cs42l73_id,
        .probe = cs42l73_i2c_probe,