net: can: mscan: remove non-CCF code for MPC512x

transition to the common clock framework has completed and the PPC_CLOCK
is no longer available for the MPC512x platform, remove the now obsolete
code path of the mpc5xxx mscan driver which accessed clock control module
registers directly

Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org
Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>

diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index f48f1297ff30e1a73fd645749ebaff207abcf391..6b0c9958d824b729d74cfbbdb83713a71dd978f3 100644 (file)
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -109,9 +109,6 @@ static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
 #endif /* CONFIG_PPC_MPC52xx */
 
 #ifdef CONFIG_PPC_MPC512x
-
-#if IS_ENABLED(CONFIG_COMMON_CLK)
-
 static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
                                 const char *clock_source, int *mscan_clksrc)
 {
@@ -277,144 +274,6 @@ static void mpc512x_can_put_clock(struct platform_device *ofdev)
        if (priv->clk_ipg)
                clk_disable_unprepare(priv->clk_ipg);
 }
-
-#else  /* COMMON_CLK */
-
-struct mpc512x_clockctl {
-       u32 spmr;               /* System PLL Mode Reg */
-       u32 sccr[2];            /* System Clk Ctrl Reg 1 & 2 */
-       u32 scfr1;              /* System Clk Freq Reg 1 */
-       u32 scfr2;              /* System Clk Freq Reg 2 */
-       u32 reserved;
-       u32 bcr;                /* Bread Crumb Reg */
-       u32 pccr[12];           /* PSC Clk Ctrl Reg 0-11 */
-       u32 spccr;              /* SPDIF Clk Ctrl Reg */
-       u32 cccr;               /* CFM Clk Ctrl Reg */
-       u32 dccr;               /* DIU Clk Cnfg Reg */
-       u32 mccr[4];            /* MSCAN Clk Ctrl Reg 1-3 */
-};
-
-static struct of_device_id mpc512x_clock_ids[] = {
-       { .compatible = "fsl,mpc5121-clock", },
-       {}
-};
-
-static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
-                                const char *clock_name, int *mscan_clksrc)
-{
-       struct mpc512x_clockctl __iomem *clockctl;
-       struct device_node *np_clock;
-       struct clk *sys_clk, *ref_clk;
-       int plen, clockidx, clocksrc = -1;
-       u32 sys_freq, val, clockdiv = 1, freq = 0;
-       const u32 *pval;
-
-       np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
-       if (!np_clock) {
-               dev_err(&ofdev->dev, "couldn't find clock node\n");
-               return 0;
-       }
-       clockctl = of_iomap(np_clock, 0);
-       if (!clockctl) {
-               dev_err(&ofdev->dev, "couldn't map clock registers\n");
-               goto exit_put;
-       }
-
-       /* Determine the MSCAN device index from the peripheral's
-        * physical address. Register address offsets against the
-        * IMMR base are:  0x1300, 0x1380, 0x2300, 0x2380
-        */
-       pval = of_get_property(ofdev->dev.of_node, "reg", &plen);
-       BUG_ON(!pval || plen < sizeof(*pval));
-       clockidx = (*pval & 0x80) ? 1 : 0;
-       if (*pval & 0x2000)
-               clockidx += 2;
-
-       /*
-        * Clock source and divider selection: 3 different clock sources
-        * can be selected: "ip", "ref" or "sys". For the latter two, a
-        * clock divider can be defined as well. If the clock source is
-        * not specified by the device tree, we first try to find an
-        * optimal CAN source clock based on the system clock. If that
-        * is not posslible, the reference clock will be used.
-        */
-       if (clock_name && !strcmp(clock_name, "ip")) {
-               *mscan_clksrc = MSCAN_CLKSRC_IPS;
-               freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
-       } else {
-               *mscan_clksrc = MSCAN_CLKSRC_BUS;
-
-               pval = of_get_property(ofdev->dev.of_node,
-                                      "fsl,mscan-clock-divider", &plen);
-               if (pval && plen == sizeof(*pval))
-                       clockdiv = *pval;
-               if (!clockdiv)
-                       clockdiv = 1;
-
-               if (!clock_name || !strcmp(clock_name, "sys")) {
-                       sys_clk = devm_clk_get(&ofdev->dev, "sys_clk");
-                       if (IS_ERR(sys_clk)) {
-                               dev_err(&ofdev->dev, "couldn't get sys_clk\n");
-                               goto exit_unmap;
-                       }
-                       /* Get and round up/down sys clock rate */
-                       sys_freq = 1000000 *
-                               ((clk_get_rate(sys_clk) + 499999) / 1000000);
-
-                       if (!clock_name) {
-                               /* A multiple of 16 MHz would be optimal */
-                               if ((sys_freq % 16000000) == 0) {
-                                       clocksrc = 0;
-                                       clockdiv = sys_freq / 16000000;
-                                       freq = sys_freq / clockdiv;
-                               }
-                       } else {
-                               clocksrc = 0;
-                               freq = sys_freq / clockdiv;
-                       }
-               }
-
-               if (clocksrc < 0) {
-                       ref_clk = devm_clk_get(&ofdev->dev, "ref_clk");
-                       if (IS_ERR(ref_clk)) {
-                               dev_err(&ofdev->dev, "couldn't get ref_clk\n");
-                               goto exit_unmap;
-                       }
-                       clocksrc = 1;
-                       freq = clk_get_rate(ref_clk) / clockdiv;
-               }
-       }
-
-       /* Disable clock */
-       out_be32(&clockctl->mccr[clockidx], 0x0);
-       if (clocksrc >= 0) {
-               /* Set source and divider */
-               val = (clocksrc << 14) | ((clockdiv - 1) << 17);
-               out_be32(&clockctl->mccr[clockidx], val);
-               /* Enable clock */
-               out_be32(&clockctl->mccr[clockidx], val | 0x10000);
-       }
-
-       /* Enable MSCAN clock domain */
-       val = in_be32(&clockctl->sccr[1]);
-       if (!(val & (1 << 25)))
-               out_be32(&clockctl->sccr[1], val | (1 << 25));
-
-       dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
-               *mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
-               clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
-
-exit_unmap:
-       iounmap(clockctl);
-exit_put:
-       of_node_put(np_clock);
-       return freq;
-}
-
-#define mpc512x_can_put_clock NULL
-
-#endif /* COMMON_CLK */
-
 #else /* !CONFIG_PPC_MPC512x */
 static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
                                 const char *clock_name, int *mscan_clksrc)