[SCSI] qla4xxx: update AER support for ISP82XX

* Cleanup qla4xxx_pci_mmio_enabled():
  don't want to return PCI_ERS_NEED_RESET if firmware hung.
  IDC will take care of it.
* Request irq after initialize_adapter() in qla82xx_error_recovery().
* Return all active commands from qla4xxx_pci_error_detected().
* Cleanup ql4_def.h

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index f595ab13c2e17b3be7ee6b39cb93dbfde8e1bea9..0f3bfc3da5cf6670287393bb4ca64baee59db2e4 100644 (file)
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
+#include <linux/aer.h>
 
 #include <net/tcp.h>
 #include <scsi/scsi.h>
@@ -36,24 +37,6 @@
 #include "ql4_dbg.h"
 #include "ql4_nx.h"
 
-#if defined(CONFIG_PCIEAER)
-#include <linux/aer.h>
-#else
-/* AER releated */
-static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
-{
-       return -EINVAL;
-}
-static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
-{
-       return -EINVAL;
-}
-static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
-{
-       return -EINVAL;
-}
-#endif
-
 #ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
 #define PCI_DEVICE_ID_QLOGIC_ISP4010   0x4010
 #endif

diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 779745f4e59c5d7d0a63e24e83316f738e452af9..4b6cdb68a52a189d86257d143e12387ed0c49da1 100644 (file)
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -2252,6 +2252,8 @@ qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
                qla4xxx_mailbox_premature_completion(ha);
                qla4xxx_free_irqs(ha);
                pci_disable_device(pdev);
+               /* Return back all IOs */
+               qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
                return PCI_ERS_RESULT_NEED_RESET;
        case pci_channel_io_perm_failure:
                set_bit(AF_EEH_BUSY, &ha->flags);
@@ -2275,17 +2277,13 @@ qla4xxx_pci_mmio_enabled(struct pci_dev *pdev)
        if (!is_aer_supported(ha))
                return PCI_ERS_RESULT_NONE;
 
-       if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
-               ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: firmware hang  -- "
-                   "mmio_enabled\n", ha->host_no, __func__);
-               return PCI_ERS_RESULT_NEED_RESET;
-       } else
-               return PCI_ERS_RESULT_RECOVERED;
+       return PCI_ERS_RESULT_RECOVERED;
 }
 
-uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
+static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
 {
        uint32_t rval = QLA_ERROR;
+       uint32_t ret = 0;
        int fn;
        struct pci_dev *other_pdev = NULL;
 
@@ -2297,7 +2295,6 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
                clear_bit(AF_ONLINE, &ha->flags);
                qla4xxx_mark_all_devices_missing(ha);
                qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
-               qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
        }
 
        fn = PCI_FUNC(ha->pdev->devfn);
@@ -2360,7 +2357,16 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
                        /* Clear driver state register */
                        qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
                        qla4_8xxx_set_drv_active(ha);
-                       ha->isp_ops->enable_intrs(ha);
+                       ret = qla4xxx_request_irqs(ha);
+                       if (ret) {
+                               ql4_printk(KERN_WARNING, ha, "Failed to "
+                                   "reserve interrupt %d already in use.\n",
+                                   ha->pdev->irq);
+                               rval = QLA_ERROR;
+                       } else {
+                               ha->isp_ops->enable_intrs(ha);
+                               rval = QLA_SUCCESS;
+                       }
                }
                qla4_8xxx_idc_unlock(ha);
        } else {
@@ -2372,8 +2378,18 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
                        clear_bit(AF_FW_RECOVERY, &ha->flags);
                        rval = qla4xxx_initialize_adapter(ha,
                            PRESERVE_DDB_LIST);
-                       if (rval == QLA_SUCCESS)
-                               ha->isp_ops->enable_intrs(ha);
+                       if (rval == QLA_SUCCESS) {
+                               ret = qla4xxx_request_irqs(ha);
+                               if (ret) {
+                                       ql4_printk(KERN_WARNING, ha, "Failed to"
+                                           " reserve interrupt %d already in"
+                                           " use.\n", ha->pdev->irq);
+                                       rval = QLA_ERROR;
+                               } else {
+                                       ha->isp_ops->enable_intrs(ha);
+                                       rval = QLA_SUCCESS;
+                               }
+                       }
                        qla4_8xxx_idc_lock(ha);
                        qla4_8xxx_set_drv_active(ha);
                        qla4_8xxx_idc_unlock(ha);
@@ -2415,12 +2431,7 @@ qla4xxx_pci_slot_reset(struct pci_dev *pdev)
                goto exit_slot_reset;
        }
 
-       ret = qla4xxx_request_irqs(ha);
-       if (ret) {
-               ql4_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d"
-                   " already in use.\n", pdev->irq);
-               goto exit_slot_reset;
-       }
+       ha->isp_ops->disable_intrs(ha);
 
        if (is_qla8022(ha)) {
                if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {