[ARM] 5319/1: AT91: support AT91CAP9 revC CPUs

The AT91CAP9 revC CPU has a few differences over the previous,
revB CPU which was distributed in small quantities only (revA was
an internal Atmel product only).

This patch adds the detection routines to recognize the different
AT91CAP9 revisions (based on the PMC subsystem version number), and
uses them to:
	- activate a workaround for the external interrupts levels
	  (on revB CPUs)
	- set the UDPHS_BYPASS bit (on revB CPUs)
	- set AT91_GPBR register address to the correct offset
	  (0xfffffd50 on revB, 0xfffffd60 on revC)

For debugging usage, the CPU revision can be found in /proc/cpuinfo
on the 'Revision' line.

This patch is extracted from Andrew Victor's -at91 patch (2.6.27-at91.patch)
where it has been tested for the last 6 months.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 0fc0adaebd583ed0718366f354fb970078d35c2d..0a38c69fdbc450f3d09ed7545ef60af14e45fb50 100644 (file)
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,6 +17,8 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+
+#include <mach/cpu.h>
 #include <mach/at91cap9.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -317,6 +319,12 @@ void __init at91cap9_initialize(unsigned long main_clock)
 
        /* Register GPIO subsystem */
        at91_gpio_init(at91cap9_gpio, 4);
+
+       /* Remember the silicon revision */
+       if (cpu_is_at91cap9_revB())
+               system_rev = 0xB;
+       else if (cpu_is_at91cap9_revC())
+               system_rev = 0xC;
 }
 
 /* --------------------------------------------------------------------

diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 3a36182c50cc6f03253c0a98d1fdfca42959d1ed..9eca2209cde630dd656491ef5c964461f2c8b5b2 100644 (file)
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -13,6 +13,7 @@
  */
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/irq.h>
 
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
@@ -21,6 +22,7 @@
 #include <video/atmel_lcdc.h>
 
 #include <mach/board.h>
+#include <mach/cpu.h>
 #include <mach/gpio.h>
 #include <mach/at91cap9.h>
 #include <mach/at91cap9_matrix.h>
@@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
        if (!data)
                return;
 
+       if (cpu_is_at91cap9_revB())
+               set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
+
        /* Enable VBus control for UHP ports */
        for (i = 0; i < data->ports; i++) {
                if (data->vbus_pin[i])
@@ -151,8 +156,13 @@ static struct platform_device at91_usba_udc_device = {
 
 void __init at91_add_device_usba(struct usba_platform_data *data)
 {
-       at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
-                                         AT91_MATRIX_UDPHS_BYPASS_LOCK);
+       if (cpu_is_at91cap9_revB()) {
+               set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
+               at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
+                                                 AT91_MATRIX_UDPHS_BYPASS_LOCK);
+       }
+       else
+               at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
 
        /*
         * Invalid pins are 0 on AT91, but the usba driver is shared
@@ -850,6 +860,9 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
        if (!data)
                return;
 
+       if (cpu_is_at91cap9_revB())
+               set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
+
        at91_set_A_periph(AT91_PIN_PC1, 0);     /* LCDHSYNC */
        at91_set_A_periph(AT91_PIN_PC2, 0);     /* LCDDOTCK */
        at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDDEN */

diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 43b37bc91e5feb069bd4eb14b1fc7ddd40647141..83a1a0fef47be359b7138f4584d734a6f1ff5ae0 100644 (file)
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -36,11 +36,9 @@
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 
 #include <mach/board.h>
 #include <mach/gpio.h>
@@ -376,10 +374,8 @@ static void __init cap9adk_board_init(void)
        /* Serial */
        at91_add_device_serial();
        /* USB Host */
-       set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
        at91_add_device_usbh(&cap9adk_usbh_data);
        /* USB HS */
-       set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
        at91_add_device_usba(&cap9adk_usba_udc_data);
        /* SPI */
        at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -396,7 +392,6 @@ static void __init cap9adk_board_init(void)
        /* I2C */
        at91_add_device_i2c(NULL, 0);
        /* LCD Controller */
-       set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
        at91_add_device_lcdc(&cap9adk_lcdc_data);
        /* AC97 */
        at91_add_device_ac97(&cap9adk_ac97_data);

diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 2e3f2894b70496535660883a29fd21cd0bf76deb..9561e33b8a9af76ecd3eb91670254f549065b639 100644 (file)
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -23,6 +23,7 @@
 #define                AT91_PMC_PCK            (1 <<  0)               /* Processor Clock */
 #define                AT91RM9200_PMC_UDP      (1 <<  1)               /* USB Devcice Port Clock [AT91RM9200 only] */
 #define                AT91RM9200_PMC_MCKUDP   (1 <<  2)               /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define                AT91CAP9_PMC_DDR        (1 <<  2)               /* DDR Clock [AT91CAP9 revC only] */
 #define                AT91RM9200_PMC_UHP      (1 <<  4)               /* USB Host Port Clock [AT91RM9200 only] */
 #define                AT91SAM926x_PMC_UHP     (1 <<  6)               /* USB Host Port Clock [AT91SAM926x only] */
 #define                AT91CAP9_PMC_UHP        (1 <<  6)               /* USB Host Port Clock [AT91CAP9 only] */
@@ -102,10 +103,16 @@
 #define                AT91_PMC_LOCKB          (1 <<  2)               /* PLLB Lock */
 #define                AT91_PMC_MCKRDY         (1 <<  3)               /* Master Clock */
 #define                AT91_PMC_LOCKU          (1 <<  6)               /* UPLL Lock [AT91CAP9 only] */
+#define                AT91_PMC_OSCSEL         (1 <<  7)               /* Slow Clock Oscillator [AT91CAP9 revC only] */
 #define                AT91_PMC_PCK0RDY        (1 <<  8)               /* Programmable Clock 0 */
 #define                AT91_PMC_PCK1RDY        (1 <<  9)               /* Programmable Clock 1 */
 #define                AT91_PMC_PCK2RDY        (1 << 10)               /* Programmable Clock 2 */
 #define                AT91_PMC_PCK3RDY        (1 << 11)               /* Programmable Clock 3 */
 #define        AT91_PMC_IMR            (AT91_PMC + 0x6c)       /* Interrupt Mask Register */
 
+#define AT91_PMC_PROT          (AT91_PMC + 0xe4)       /* Protect Register [AT91CAP9 revC only] */
+#define                AT91_PMC_PROTKEY        0x504d4301      /* Activation Code */
+
+#define AT91_PMC_VER           (AT91_PMC + 0xfc)       /* PMC Module Version [AT91CAP9 only] */
+
 #endif

diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 4a4b64135a922a16ebb72e3c38e0c09acfc39361..d8c1ededaa75aea4ab8835ade94c2dda544068f7 100644 (file)
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -101,7 +101,9 @@
 #define AT91_RTT       (0xfffffd20 - AT91_BASE_SYS)
 #define AT91_PIT       (0xfffffd30 - AT91_BASE_SYS)
 #define AT91_WDT       (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR      (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR      (cpu_is_at91cap9_revB() ?       \
+                       (0xfffffd50 - AT91_BASE_SYS) :  \
+                       (0xfffffd60 - AT91_BASE_SYS))
 
 #define AT91_USART0    AT91CAP9_BASE_US0
 #define AT91_USART1    AT91CAP9_BASE_US1

diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index dbfd9f73f80bb4aa531e8a6ec063de0082fb2195..c554c3e4d5532c09a96eef3270c3e5a71f68fb99 100644 (file)
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -49,6 +49,17 @@ static inline unsigned long at91_arch_identify(void)
        return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
 }
 
+#ifdef CONFIG_ARCH_AT91CAP9
+#include <mach/at91_pmc.h>
+
+#define ARCH_REVISION_CAP9_B   0x399
+#define ARCH_REVISION_CAP9_C   0x601
+
+static inline unsigned long at91cap9_rev_identify(void)
+{
+       return (at91_sys_read(AT91_PMC_VER));
+}
+#endif
 
 #ifdef CONFIG_ARCH_AT91RM9200
 #define cpu_is_at91rm9200()    (at91_cpu_identify() == ARCH_ID_AT91RM9200)
@@ -90,8 +101,12 @@ static inline unsigned long at91_arch_identify(void)
 
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()      (at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
+#define cpu_is_at91cap9_revC() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_C)
 #else
 #define cpu_is_at91cap9()      (0)
+#define cpu_is_at91cap9_revB() (0)
+#define cpu_is_at91cap9_revC() (0)
 #endif
 
 /*

diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 2133f37906f2928f8d3ccacf0fc7bcd77aa7d3ce..d5e4e637ddecb5a4f63db385510e3962cb0bb3dc 100644 (file)
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -21,6 +21,7 @@
 
 #include <mach/board.h>
 #include <mach/at91_rtt.h>
+#include <mach/cpu.h>
 
 
 /*