]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
ath9k: Fix error condition for corrupt descriptors
authorSujith Manoharan <c_manoha@qca.qualcomm.com>
Wed, 14 Aug 2013 03:41:21 +0000 (09:11 +0530)
committerJohn W. Linville <linville@tuxdriver.com>
Thu, 15 Aug 2013 20:08:05 +0000 (16:08 -0400)
In case a descriptor has the "done" bit clear and the
next descriptor has it set, we drop both of them. If
the packet that is received after these two packets
is dropped for some reason, "discard_next" will not cleared.
Fix this.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/recv.c

index 30cb7267c12b6e0115137fe8d88654b2dbb02252..ec8928041da0226d175565d8db38b7f1f6389c49 100644 (file)
@@ -1068,6 +1068,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
        struct ath_common *common = ath9k_hw_common(ah);
        struct ieee80211_hdr *hdr;
        bool discard_current = sc->rx.discard_next;
+       int ret = 0;
 
        /*
         * Discard corrupt descriptors which are marked in
@@ -1106,8 +1107,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
         * This is different from the other corrupt descriptor
         * condition handled above.
         */
-       if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC)
-               return -EINVAL;
+       if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) {
+               ret = -EINVAL;
+               goto exit;
+       }
 
        hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
 
@@ -1123,15 +1126,18 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
                if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime))
                        RX_STAT_INC(rx_spectral);
 
-               return -EINVAL;
+               ret = -EINVAL;
+               goto exit;
        }
 
        /*
         * everything but the rate is checked here, the rate check is done
         * separately to avoid doing two lookups for a rate for each frame.
         */
-       if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
-               return -EINVAL;
+       if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) {
+               ret = -EINVAL;
+               goto exit;
+       }
 
        rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
        if (rx_stats->is_mybeacon) {
@@ -1139,8 +1145,10 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
                ath_start_rx_poll(sc, 3);
        }
 
-       if (ath9k_process_rate(common, hw, rx_stats, rx_status))
-               return -EINVAL;
+       if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
+               ret =-EINVAL;
+               goto exit;
+       }
 
        ath9k_process_rssi(common, hw, hdr, rx_stats);
 
@@ -1152,15 +1160,15 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
        if (rx_stats->rs_moreaggr)
                rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
 
-       sc->rx.discard_next = false;
-
 #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
        if (ieee80211_is_data_present(hdr->frame_control) &&
            !ieee80211_is_qos_nullfunc(hdr->frame_control))
                sc->rx.num_pkts++;
 #endif
 
-       return 0;
+exit:
+       sc->rx.discard_next = false;
+       return ret;
 }
 
 static void ath9k_rx_skb_postprocess(struct ath_common *common,